I have a spreadsheet that contains numerous ranges on different sheets with monthly data. The year begins with all formulas for forecasted data and as each month passes I need to copy/paste values in the current month column to reflect "actual" data vs. "forecasted". I would like to simplify this by using VBA, based on an inputbox ("current month") to find the month in each range and copy/paste values.
View 1 Repliesa VBA code to do the following:
I have a worksheet consist of some 17,000 records - from ColA:ColDZ. In Datasheet, I have all values. From this, based on some values in ColA all records should be copied into another sheet(s).
I have attached a sample workbook in which I have explained the requirement.
I would like to copy and paste the values from a worksheet (HS-Detail) in a file to different tabs depending on the value in column A (Regions). I have a macro that works but it pastes the formulas and it takes quiet a while to run due to the number of records. How can I alter this to paste just the values and speed up the macro?
[Code] ......
I am very new to Macro programming. I want to set up a macro which will copy data from few cells in a sheet and paste them as "Values" to certain specific locations in another sheet based on criteria. This copy paste needs to be done for about 40 different cells. I want to fix this with a button on the source sheet, so that this process happens when the button is clicked. I am attaching a sample file showing what I need.
View 2 Replies View RelatedNeed VBA macro that will copy & paste (Special > AS VALUES) from one of two (Data A & B) sheets based on the contents of a validation cell ($D$4) in a third (Report) sheet? The destination starting cell would be $F$11. ALSO - I'd like to have the Named Ranges "DataAExtract" & "DataBExtract" used in the code (for the COPY region) so I can see an example of how to reflect my actual named ranges in my working file.
The reason for doing this is that the "c.Characters...." lines in my conditional formatting macros (attached) are not working on cells containing formula output (in my working file the Report page is all populated by VLOOKUP results), but the macros run fine on hard-coded values. In my attached workbook, I'd like to have the "NEW" macro for the copy & paste step fire first in the sequence of macros running after the FORM button-click (control located in cell $D$5 of the Report sheet), whether that's by writing a new macro and calling mine before the new one ends, OR by consolidating all of my macros plus the new one into one smooth progression.
With this low-tech approach I can get updated VALUES into the report area once the user selects a data source and a customer on the report sheet. The COPY ranges in my working spreadsheet will update based on the selections made in the report page. I tried recording a macro and then modifying the recorded code to add the "If > Then" functionality I'm looking for, but I'm pretty green when it comes to VBA code and syntax.
I have spent a few days searching through forums but cannot find examples that i have been able to successfully adapt ( because they are to complicated for my limited knowledge). I have a workbook with 5 sheets, sheet1 (current), and sheet 4 (archive) are the important ones. I need a macro to
A) copy rows from "current" to "archive" ( to the 1st empty row) if column S of "current" contains "Closed" ( the word is generated by formula).
B) The paste needs to paste special values and number formats ( want to lose formula but not conditional formatting).
C) data sort "archives" based on col A - this puts the newly archived data into correct sequence.Data sort lowest number 1st
D) delete the copied rows from "current".
e) give me a count of how many rows it deleted, (I have a macro to insert rows so will run that manually to recreate the correct number of emtpy rows (with formula and formatting) to bring the current sheet back to usual size.
I tried modifying a macro by RPaulson (based on cells on one sheet to cells on another), to work with entire rows but couldn't get it to work.
Found that paste special uses PasteSpecial xlPasteValues, but , and thats about it.
I tried all failed.We have about 160 different workbooks (one for each business unit) stored online. Staff enters information about their weekly revenue and expenses and here at head office I collect that information and consolidate them.What I am trying to do is that;1.) Create a master Workbook with ~160 worksheets (One worksheet for each unit) named exactly the same with other workbooks2.) And macro can pull the information from related files stored in a certain folderIt is very much like another members problem but I am not sure why I cant get that code working for me? [URL]
View 5 Replies View RelatedPlease see attached sample worksheet. Column A will be generated by the user manually.
I'm looking for a way in VBA to have A1:D20 in Sheet2 copied and pasted in the "Bank Reconciliation" Sheet based on how many "Markets" there are in Column A. Then, once that's complete to have A22:D30 (the smaller box in Sheet2) copied and pasted directly below those results.
I have what the macro would hopefully generate to the right in "Bank Reconciliation" (B6:E54) as an example. So if there's a market in A1, copy and paste the box to B6. If there's a market in A2, copy and paste the box directly below the first (B26) etc. etc. until it's done, then paste the smaller box directly below whatever the macro generates.
Book2.xlsx‎
I have a frame (Frame1) on a userform added using Microsoft Forms 2.0 Frame. I have added option buttons to the frame named OptionButton1 thru OptionButton4. I am trying to add code where certain cells are copied and pasted depending on which optbutton is selected. I tried the following code but because the option button is a frame object it doesn't seem to trigger the event.
Private Sub OptionButton1_Click()
'copy level 1
If Me.OptionButton1 = True Then
Worksheets("Sheet1").Range("G10:G32").Copy
Worksheets("Sheet1").Select
Worksheets("Sheet1").Range("C10:C32").Select
Selection.PasteSpecial Paste:=xlPasteValuesAndNumberFormats, Operation:= _
xlNone, SkipBlanks:=False, Transpose:=False
End If
End Sub
Sheet linked from external file, new data coming daily. How to copy Values of cells from B4 till B-empty to C column? The attached file has a properly displayed data.
View 3 Replies View RelatedAttached is my code, pay attention to the bold part. I want the sourceSheet to be copied as a sheet and pasted in the targetSheet (the Sheet2 of "NewBook") but I want it pasted asvalues. Here is the specific part which needs to be looked at...and below is the full code.
VB:
Set sourceBook = Application.Workbooks.Open(sourceFilename)
Set sourceSheet = sourceBook.Sheets("Current")
Set targetSheet = NewBook.Sheets("Sheet2")
[Code].....
I want to copy and paste from one sheet to another based on column a using a macro copy button.
E.g. if column a value = apple then copy that row into the apple sheet.
i'm trying to use HLookup to find an adjusted midterm grade that's given. but i have some conditions:
If student missed exam and has a zero – keep zero.
If student has a grade of 1-119 points, increase their grade 40 points.
If student has a grade of 120-125 points, increase their grade 35 points.
If student has a grade of 126-131 points, increase their grade 31 points.
If student has a grade of 132-139 points, increase their grade 27 points.
with these conditions, if my midterms grade is 120, how would i calculate it using HLookup? i worked on it but i keep getting the #NA! error.
=H4+HLOOKUP(H4,B24:D25,2).
I am trying to import a BASE ESTIMATE table into EXCEL.
I have problems with most of the formulas, especially this one:
=VLOOKUP($E$2,$B$24:$P$604,HLOOKUP($E$3,$D$22:$L$604,1)+2)*HLOOKUP(HLOOKUP($E$3,$D$22:$L$604,1),$D$2 2:$L$23,2)
and this one
=ROUND((IF(AND(OR(E7>E5,E7>E6),E3<40000),E7,IF(AND(E6<E5,E3<40000),E6,E5)))*E8*1.055*1.06,2)+10
I am not sure if EXCEL allows a HLOOKUP within an HLOOKUP. If not, how can I get around this?
I have a huge data and I need to find values through HLookup and than have to find the sum of that whole column.But when I tried to to so It is showing error as Formula broken.
sum(HLOOKUP((HLOOKUP(F7,B1:D5,2,TRUE)),B1:D5,3,1):HLOOKUP((HLOOKUP(F7,B1:D5,2,TRUE)),B1:D5,4,1))
Here f7 = the value which need to be find.
It is like
Abc
Cdb
1
2
3
and i want the sum of (1,2,3) and have given to search for Abc
I have a chart of numbers pertaining to progress of a project by month. The
end of month dates are in a row across the top, the progress % are in
corresponding rows and columns below:
31-mar-06 30-apr-06 31-may-06 30-jun-06
5.5 3.4 1.2 2.6
I'm trying to do a SUM of HLOOKUP values to get a total progress for a given
month. For example, I need to see the total progress for end of May from end
of March: SUM(HLOOKUP(5.5) to HLOOKUP(1.2))=5.5+3.4+1.2 in a cell at the
end of the row. How can I do this? Do I need to use another function?
By using a macro on the attached report I like to copy the row values named "Section Total" in red and and paste them over the values starting with "Aged Debt" in blue (the rest of the wording cahanges every month so "Aged Debt" is the key word for that row).
View 1 Replies View RelatedHow can i use this code to make it working also on a range filtered
Sub CopyPasteValues()
Selection.Copy
Selection.PasteSpecial Paste:=xlPasteValues
End Sub
How do I tell VB to copy the values from whole row on one worksheet to the row with the active cell on another worksheet?
View 3 Replies View RelatedI paste cell information into cells already formatted to have certain colored backgrounds, ect. However, upon pasting the cell format from the copied cell is obviously applied.
Is there a way of locking the cell formatting so that I can paste information from a different cell, but the font/bground colors stay the same?
How do I adjust this formula so it copies & paste special values rather than copying formatting etc? I am very new to this and I have looked at other examples but have found it hard to adjust my code using those examples.
VB:
Sub PrepayjournalKW()
'
' PrepayjournalKW Macro
'
Range("A6", Range("A" & Rows.Count).End(xlUp)).Copy Destination:=Sheets("Journal").Range("A1")
Range("B6", Range("B" & Rows.Count).End(xlUp)).Copy Destination:=Sheets("Journal").Range("C1")
Range("AB6", Range("AB" & Rows.Count).End(xlUp)).Copy Destination:=Sheets("Journal").Range("D1")
Range("AF6", Range("AB" & Rows.Count).End(xlUp)).Copy Destination:=Sheets("Journal").Range("E1")
End Sub
I am trying to create a macro to automatically copy and paste values from column M into column N.
Column M is a Concatenated formula, and I want people to be able to copy the result easily without having to do any copy+"paste values" themselves.
So I have the following:
Sub CopyFormulaResults()
Application.OnTime Now() + TimeValue("00:00:01"), "CopyFormulaResults"
Range("M3:M1000").Select
[Code]....
However, the macro only runs when I run the macro, not automatically every second like I want it too.
I have basic values in sheet named 'Basic"
i have aggregate values in sheet named "Aggregate"
The values shown in B5:D5 in sheet basic is an outcome of a formula.I want this values to be copied to E3:G3 in sheet named aggregate.
likewise the values shown in B11:D11 in sheet Basic to be copied to E4:G4 in sheet aggregate.
i can do this manually by copy and paste special-values.
But is there any way to done it automatically by excel?
we have numbers in cells at positive and nigative values, how can we copy and paste in absolute values
View 2 Replies View RelatedI'm downloading a tone of financial data from a database and without fail there are always a few odd numbers over time that are either wrong or that I want to through out of my charts/analysis. But I don't want to change them directly in the sheet that I use the code to download straight from the database since I can just click update and the codes refresh the latest data into the format I need. Basically once I hit refresh and download the data into the coded worksheet template I want a macro that lets me pick a tab or multiple tabs and copy and past special value the data into a new worksheet where I can manipulate the data without screwing up the code.
View 3 Replies View RelatedI'm getting better with Excel and have gotten pretty good with formulas, but my VB/Macro understanding is limited, if not non-existent!
What I need is to assign a macro to a button so that when executed, it copies the entire sheet and pastes all as values.
Tried all day to find a way of selecting text ( from several cells) on one sheet and then having it pasted into the textbox on another sheet. I did originally paste the text to a cell but it makes the row's vary in size depending on the copied text and gets a bit annoying. Seems to be This is the paste to Cell code
View 4 Replies View RelatedI need to automatically copy cell IR18 value to cell JT18. I've been searching the forum for some code and I came up with something that only partially works for me:
View 10 Replies View Relatedin my original sheet, I have lots of formulas. I'd like to create a new sheet that uses the same values from my original sheet.
View 2 Replies View RelatedI have the following data column:
and I would like to copy and paste these values in column B WITHOUT THE EMPTY CELLS, see below: