Named Range That Refers To Active Sheet
Jun 15, 2007
is there a way to have the same named range cover a range of cells regardless of which sheet you are on? They seem to want to default to the page you are on. I want to make some VBA subroutines that will go over each sheet, and perform the same functions on each sheet. All sheets have the same format, but different data. I guess worst case scenario I can just break down and use multiple workbooks, but this seems a little less desirable. Should I be dividing this into seperate posts?
View 3 Replies
ADVERTISEMENT
Jan 13, 2010
My file has a code that refers to a dynamic named range. When I run the macro that range gets corrupted and I cannot figure it out why. before the macro the named range refers to:
=OFFSET(Manager!$A$1,0,0,MATCH("*",Manager!$A:$A,-1),3)
and right after I run the macro it turns to:
=OFFSET(Manager!#REF!,0,0,MATCH("*",Manager!$A:$A,-1),3)
View 2 Replies
View Related
Aug 10, 2008
I have a named range that expands and contracts based upon the amount of data that is in some column. Call it AllData_UsedRange.
I have another named range that actually refers to a range. Call it AllData.
Column A
Row2 56
Row3 44
Row4 65
AllData is a named range that refers to the range A2:A65536
AllData_UsedRange refers to A2:A4 by way of this formula.
=OFFSET(AllData,0,0,COUNTA(AllData))
How to I obtain an address of AllData_UsedRange in VBA code?
These do not work...
ThisWorkbook.Names("AllData_UsedRange").RefersToRange.Address
Evaluate(ThisWorkbook.Names("AllData_UsedRange"))
View 9 Replies
View Related
Aug 14, 2012
How can I test in my VBA wether a named range (with a scope of sheet) exists on the active sheet?
Code:
If "EmployeeEmail" exists on the active sheet Then,
xxxx
Else
yyyy
End If
Using Excel 2010.
View 7 Replies
View Related
Mar 21, 2014
I'm trying to design an if statement that refers to a range of cells on a calculation sheet to perform one calculation on TRUE; another on FALSE
=IF(A22='Calculation Sheet'!A27:A36,B22*100/16,B22*100/8)
When I view the formula in Function Arguments window, Value_if_true = 1043.75 & Value_if_false = 2087.5 <- these are correct
IF Func Arg.jpg
When I view the cell in the spreadsheet, system displays #VALUE!
When I view Evaluate Formula window, it seems Excel doesn't like the text.
IF Form Eval.jpg
View 5 Replies
View Related
Jul 19, 2013
I'm trying to make my named ranges remember the values of the last active cells used within another named range. The purpose of this is to make my charts dynamically change dependant on two criteria selected. My spreadsheet currently updates itself as and when I change the active cell within a single named range, dynamically changing the chart data by using Lookup based on the active cells value. However I want to get away from having several charts showing, I would like to have a single chart which dynamically changes based on a second selection. So the first selection is for a department (Facility) which changes the chart data relevant to that department, the second selection is to dynamically change the chart shown for the pre selected department.
Picture2.jpg
Using the following code when updating just one criteria with several charts
VB:
Private Sub Worksheet_SelectionChange(ByVal Target As Range)
If Not Application.Intersect(ActiveCell, [MeasureType]) Is Nothing Then
[valMeasurePicked] = ActiveCell.Value [code].....
which works fine but I'm not sure how to add a second selection criteria because my code uses Activecell. I thought that the VBA needed to set the last used value of a range as a variable and therefore allow the second criteria to be selected but am not sure how to put it into practice.
View 2 Replies
View Related
Jul 19, 2012
How do i change the below code to not reference a named sheet but the active sheet.
In case you need it i'm trying to sort columns A:CQ on row 2 smallest to largest from left to right.
Code:
Sub Sort_Left_Right()
' Sort_Left_Right Macro
Columns("A:CQ").Select
ActiveWorkbook.Worksheets("Sheet1").Sort.SortFields.Clear
ActiveWorkbook.Worksheets("Sheet1").Sort.SortFields.Add Key:=Range("A2:CQ2") _
, SortOn:=xlSortOnValues, Order:=xlAscending, DataOption:=xlSortNormal
[Code ..........
View 3 Replies
View Related
Mar 22, 2012
How I change the code below so that the ."AddItem" refers to a range within Sheet1?
For example .AddItem Worksheets("Sheet1").Range("O2:O20")
Code:
With ListBox1
.AddItem "January"
.AddItem "February"
.AddItem "March"
View 2 Replies
View Related
May 3, 2006
is it possible to concatenate in such a way that formatting is retained? For example, my =CONCATENATE formula refers to a cell containing 0.065, but which is formatted as a % so that the cell shows 6.5%. Concatenating that with text, however, produces "0.065 [text]"
View 4 Replies
View Related
May 6, 2012
Is there any way (in vba code) to unhide the sheet of a given named range?
If would come before the following line of code whee CurReference is already defined
Application.Goto Reference:=CurReference
View 1 Replies
View Related
Dec 14, 2008
When a sheet is the active sheet i use the following to define a range.
View 6 Replies
View Related
May 9, 2014
Looking for a macro that will copy a highlighted range to another sheet. I can get an row to move but not 3 rows.
View 5 Replies
View Related
Jun 3, 2014
My VB looks like this at the moment
[Code]....
What I want to do is when a button is clicked, the range of data in columns 2-9 of the active row gets copied. Then a new sheet is created and the data is then pasted to a range in that new sheet.
The VB I have done so far works fine but its specific to a single range - it doesnt take account of the active row.
View 7 Replies
View Related
Dec 22, 2007
I'm trying to sort data on sheet1 and sheet2. I'm running all macros from sheet one and I need it to stay active all of the time. I'm using the following code to sort sheet2. When I sort the column on sheet2 with the code, I can not get back to sheet one without an error.
Worksheets("Sheet2").Activate
Columns("a:a").Select
Selection.sort Key1:= Range("a1"), Order1:=xlDescending, Header:=xlGuess, _
OrderCustom:=1, MatchCase:=False, Orientation:=xlTopToBottom, _
DataOption1:=xlSortNormal
I've tried
Worksheets("Sheet1").Activate
Columns("a:a").Select..............
View 2 Replies
View Related
Nov 17, 2013
I am trying to use a named range on a different sheet in the same workbook to which the named range is on.
I have a named range on sheet2 called "Letters" and comprises of cells D20-D25 .
I am trying to call this range on Sheet1 at A1-A6 , so in A1 to A6 I simply have "=Letters" (No quote marks) , but I simply get "#VALUE!" (No Quote Marks), If I then extend the selected cell down to A25 the "Letters" will appear in A20-A25
whereas if I put the same "=Letters" in Sheet1 cell A20-A25 I will get the correct named range.
How can I get the range to show in Sheet 1 Cell A1-A6.
I want to reproduce a named range at a different location on a different sheet in the same workbook.
View 2 Replies
View Related
Sep 6, 2006
Sheet 1 has data entered into it, it is then printed out as a jobsheet, saved and the data cleared. There are certain fields on this sheet that are eventually manually replicated onto sheet 2. The row in which they must go on sheet 2 will always be the 'activerow' on that sheet from a previous operation. It would make life so much easier and save lots of time if I could incorporate copying cells C10,C12,K8,K12,M2,C27 and C29 from sheet 1 to respective cells H,I,J,M,N,R,S of the active row on sheet 2 before I carry out the clear data process.
View 6 Replies
View Related
Feb 6, 2009
I have a namd sheet for everyday of the year in a workbook, so jan1 jan2 jan3 etc. I have a stats page which brings together certain pertinent data from those pages, so a formula on the stats page might look like this =sum('jan1'!$m$25:$m$900). What I would like to do is to name each day - jan1 jan2 etc as a named range perhaps date1 date2 etc so that the above formula would then look like =sum(date1!$m$25:$m$900).
View 2 Replies
View Related
Jun 20, 2012
I just named a range on a sheet and would like to paste that range on a different worksheet within the same workbook. I can't figure out how to refer to the range. I've tried several different variations so far. Example below:
ActiveWorkbook.ActiveSheet.Names.Add Name:="RawSectorData", RefersToR1C1:="=R6C1:R29C11"
'Add new sheet and paste data
ActiveSheet.Name = "Raw_data_Sector_Summary"
ActiveWorkbook.Sheets.Add.Name = "RawData"
Range("A1").Formula = "=RawData!(RawSectorData)"
View 5 Replies
View Related
Apr 2, 2014
I would like to run a calculation based on selected active range in sheet. I tried several methods and cannot make it work.
View 2 Replies
View Related
Feb 11, 2013
I have a named range on one sheet, and I want to show this as a reference on other sheets. I thought this would be simple, but maybe it's just not the way named ranges are used.
Attached is a sample spreadsheet. First tab shows the table defined; in practice it would be much larger. Second tab shows how I want it to appear. I see that I can do this by copying each cell reference. But what would be nice is to simply say "Put the named range block of cells right here."
View 3 Replies
View Related
Apr 19, 2013
I have a challenge I'm trying to surmount. I have an excel sheet in which I want to be able to select Zone codes from a drop down, click on a link "search" which takes me to a place in the document that has been named according to the Zone code i pick in the drop-down. I want to achieve this using only formulas as i'm distributing the file to a wide audience who are not versed enough with computers to know how to enable macros.
View 3 Replies
View Related
Nov 17, 2011
How can i find if a named range exists in a sheet using VBA?
E.g.: I have a named range called test that houses 4 numbers in four cells. Using
Code:
Dim rtest As Range
Set rtest = Worksheets("sheet1").Range("test")
.
.
.
.
rFoundCell = _
Cells.Find(What:=rtest, After:=Range("a1"), LookIn:=xlValues, LookAt:=xlWhole, SearchOrder:= _
xlByRows, SearchDirection:=xlNext, MatchCase:=False)
Won't work. Run - time error 91 occurs.
View 9 Replies
View Related
Apr 9, 2008
I have a dynamic named range named ’db’ in sheet1. I need to have the same range linked to sheet2 starting in cell A1.
View 3 Replies
View Related
Aug 16, 2014
Let's say you have a named range, Rng1, which consists of cells A1 & A2. In vba how would you report back what, if any, named range the following cells resides:
Code] .....
here are multiple named ranges so using intersect is not feasible. Essentially, through code, I will be given a range and I need to determine if that range if part of a named range.
View 5 Replies
View Related
May 14, 2014
I currently have the following macro running to set a chart's data values:
Sub C3Quarter12013()
'
' C3Quarter32013 Macro
'
'
ActiveSheet.ChartObjects("Chart 2").Activate
ActiveChart.PlotArea.Select
ActiveChart.SeriesCollection(1).Values = _
[Code] ......
When I copy the tab and change some of the data within the cells, I want the macro refer to the chart on the current tab and the values in the current tab - as currently it refers to only "Chart 2" and the values in the tab 'Figure 2 - WE OPH'.
I've tried changing the sheet name to ActiveSheet.name but that doesn't seem to work.
View 4 Replies
View Related
Jun 2, 2006
I need to create a named range on multiple sheets with the same named range & i cant figure out how to do this. EG :- I want to create a named range called "_SubUnitRows" on sheet1 starting from "A1:A50" & other named range again called "_SubUnitRows" on Sheet2 starting from "A1:A25" ...
View 2 Replies
View Related
Oct 25, 2009
if I can use a named criteria as well as a named range. In essence what I am looking to do is count certain cells that meet the criteria in a certain named named range,
View 9 Replies
View Related
Mar 14, 2013
Merge two columns into one list in excel
I would like to combine List1 and List2 into a 3rd named range called List3. I was wondering if this were possible without using any additional cells/columns (i.e. I don't want to use Column C like in the example shown in the link above).
Here's the formula from the example:
Code:
=IFERROR(INDEX(List1,ROWS(C1:$C$1)),IFERROR(INDEX(List2,ROWS(C1:$C$1)-ROWS(List1)),""))
I've played around with it, but could not come with any that worked.
View 3 Replies
View Related
Dec 24, 2008
I'm working on a order spreadsheet system, and I have one sheet called Product Details, where the product name, list price and product code are found, these link to the Sales order page, and I need them so that they can be added to.
So far, I have created a dynamic named range for the Product name on the Product details sheet, and linked the the range via a list validation on the Sales order sheet.
The drop down list displays the products and can be added to by typing new product names on the other sheet.
What I need now is that when a product on the sales order page is selected, it draws the the list price and product code data automatically from the sheet, I tried using a normal vlookup, but I couldn't get it to work. I also need the list price and product code columns to be 'dynamic' so new values can be added further along.
View 5 Replies
View Related
May 14, 2014
What I have is a sheet that is copied periodically from some source sheet, and on this sheet is a table. This sheet is called "Onsite Checklist Template" and it's table is titled "Checklist". I also have another sheet called "Loggers and Initial Notes" which has a tabled titled "Record", and then finally a title sheet call "Proj Details".
To clear this intro up - The sheets, in their order, is: "Proj Details", "Loggers and Initial Notes", "Onsite Checklist Template". The tables: "Record" on "Loggers..." and "Checklist" on "Onsite..."
When the user wants to make a new site visit, he/she fills in the requested date and then selects a button on "Proj...". When this button is selected, it copies the table data on "Record" and puts it on "Checklist", then inserts a new worksheet tab, always in the 3rd position (the title is based on the site visit date in which the user entered), which is a copy of "Onsite...". Now we have another sheet with a table called "Checklist1", and upon another new site visit, there will be another worksheet with "Checklist2", and so on.
On the "Onsite..." worksheet, there is a button on it which also gets copied with the worksheet so that every new worksheet has this copied "Checklist ???" and this button. I'm looking for a macro that, when the button is selected, will bounce the active sheet's table "Checklist ???" off of "Record" and make changes as needed.
"Checklist ???" data range is B11:M20 (the header is on row 10); "Record" data range is B29:Q78 (the header is on row 28); Column headers are titled the same, just that "Record" has 4 extra columns, 3 in the middle and 1 on the end. "Checklist ???" columns 1-12 to "Record" columns 1-7, 10-12, 14-15. The search criteria is the 4th column in both tables ("Trk #").
I need the macro to do the following:If it finds a match, then update "Record" as needed with data from "Checklist ???", changing whatever cell is different in the row that contains the matching "Trk #", so long as the cell on "Checklist ???" is populated (i.e, if a cell on the target row of "Record" has a value, but it's blank on "Checklist ???", then "Record" wins; if it's blank on "Record", but populated on "Checklist ???", the Checklist wins. If both populated but different, then Checklist wins.If a "Trk #" exists on "Checklist ???" but is not on "Record" then add the line to "Record" (the 1st empty row, table size remains)I see no need for any "delete" at this time.
My concerns: The last column on record (column #16) is the filtering column for the worksheet copy event and needs to be left alone (it's formulated to produce a "Yes" or "No")I would like the ability to adjust table sizes if needed without modifying the macroThe table rows on "Checklist ???" will not be changed, deleted, or altered in any way by the macro.
View 2 Replies
View Related
