In the past when I copy and paste a cell, the new cell contains the formula from the old cell, with relationships between other cells maintained.
Recently my excel stopped copying formulas and copies only cell values from the old cell. It now acts as it used to act if I did a Copy-Paste Special -Values operation.
If I do select Paste Special, it grays out the formulas option and only lets me cut and paste values.
- A database sheet called 'QAEQUIP' which contains information on the movements of pieces of equipment. This information in in order of Column A which is a movements reference number.
- A reporting sheet called 'Email sheet', which you put in a month and year and using macros it copy and pastes the relevant rows from the database and puts them in date order (e.g. put in October 2013 and it will show all of the equipment moves that happened in October 2013, and in date order).
What my end user would like, is to be able to add text to an extra column on the reporting page which gets fed into the database on the corresponding row. What would the best way to do this be? I was thinking VBA for each row (there aren't that many rows) that says if this cell is changed, copy and paste the cell into the corresponding row / column on 'QAEQUIP'.
I have been using the "record macro feature". What I want the macro to do is as follows.
1. cut all data from column C and paste it into G.
2. Use the textTocolumns feature to split a comma delimited string into 2 seperate columns.
3. user the textToColumns feature to remove any leading spaces from column G.
4. cut columns d-H and shift them left startign in column C.
I can do all of this find bu using the GUI while recording the macro but when I check the vb script it's completely missing the paste commands.
When I try and run the macro it, quite rightly, returns "run-time error '1004':No data was selected to parse.
Below is the resulting recorded macro.
How do I amend this macro do include pasting the cut data?
I'm using 2003.
1. Copy cells B5 to V-First blank row in Strength Tests worksheet
2. Paste cells into Racks worksheet in cell C5
3. Change font size to 6
4. Sort by Column T descending then by Column C ascending
5. Copy one row (A5-W5 (1Rx23C)) from Racks worksheet
6. Paste row into M1 worksheet in cell D4
7. Print M1
8. Drop down one row on the Racks worksheet
9. Repeat steps 5-8 until there's a blank row.
I had copied the file with a new name and changed the target column to 14 (Column N) and it did not work. I went back to the original file with column 10 and it does not work either.
View 5 Replies View RelatedThis is my basic setup, each piece of equipment will have more than one routine to be performed:
Equipment Type
Make
Model
Serial
Location
To Be Performed
Frequency
Last Performed
Performed By
Next Due Date
R1
[Code] ..........
I want to track changes on "Last Performed" and "Performed By" and, if changed, copy both values to a separate "log" sheet. In total, there could be up to 10 routines for each peice of equipment. That means I would need to track 20 columns for changes. I would like this check to be done on save because that ensures that the user is satisfied with their changes and keeps the log from being flooded. And lastly, it needs stored in the log sheet in a way that I can identify which piece of equipment it was for and which routine was done.
This macro works fine on my machine but not with other users:
This should copy/paste certain cells then paste 3 sheets into a new work book.
ON other computers it seems to paste in a picture? works OK for me?
Sub ValidationTests()
'
' ValidationTests Macro
' Macro recorded 21/12/2011 by '
'
Sheets("Score Sheet").Select
Range("A8:M18").Select
Range("H18").Activate
Selection.Copy
[Code] ..........
I would like to implement specific cell ranges from two specific worksheets each within 33 workbooks (which all have several tabs) into a summary page in a separate workbook.
The cell ranges are going across my spreadsheet in rows and I would like for them to transpose into a columns depending on the data which I have separated by catergory on the summary page. They are all on the same location in each workbook which is separated by country. The cell ranges are E26:P37 and I would like to transpose them and have them put below eachother without overwriting for my format on the summary page, how I can put this together in a macro?
Attached is my code, pay attention to the bold part. I want the sourceSheet to be copied as a sheet and pasted in the targetSheet (the Sheet2 of "NewBook") but I want it pasted asvalues. Here is the specific part which needs to be looked at...and below is the full code.
VB:
Set sourceBook = Application.Workbooks.Open(sourceFilename)
Set sourceSheet = sourceBook.Sheets("Current")
Set targetSheet = NewBook.Sheets("Sheet2")
[Code].....
copy/paste Every Sheet Single ( P Column ) and Paste to Notepad and take P1 As file name for note pad.
View 1 Replies View RelatedI have one workbook that needs two macros.
On the "Complete Backlog" tab of my workbook, I want users to enter in the requested information based on the column header. Then I would like a Macro attached to a button that says "Refresh" that the user would click after they have entered in all of the information. This macro should look in Column M (WIP Status) and if any of the cells say "Close", it should Cut the entire row from the spreadsheet(Ex. A2:M2) and Paste it into the speadsheet titled "Closed Jobs".
This is so that as jobs are closed/finished, they are removed and stored on a separate sheet. The items would have to be pasted so that it pastes into the next available row - not just on top of each other.
I also need another macro that i can put into a button that doesn't "delete" a row from the sheet, but just copies over to another sheet - so that there are two instances in the workbook.
If would look something like: If a cell in "Column G / Director" of the "Complete Backlog" speadsheet is equal to "Snodgress" then copy columns A-L of the same row to the spreadsheet titled "Snodgress" - of course skipping down the rows to the next blank row.
.....is equal to "Herr" copy row to "Herr" spreadsheet.
....is equal to "McCormick" copy row to "McCormick" spreadsheet.
and so on.
HTML Code:
Range Apple
A B C D E
1 2 2 4 3
2 1 3 5
3 4 6 9
4 5 3 1 3
5 7 7 7 6
Range Pear
A B C D E
4 1 3 5
5 1 1 1
6 2
7 2 2
8 5 7
Range Apple
A B C D E
1 2 2 4 3
2 1 3 5
3 4 6 9
4 5 3 1 3
5 7 7 7 6
How would you prevent the copy/paste of cells that have comments?
Also, how would you allow cells with comments to be copied and pasted without pasting the comments?
I also have an aside question about the forum advanced search. When searching for multiple search words, how would you type the search to include all words, for example, "prevent" & "paste" & "comments".
What I am trying to do is when data is changed in a workbook, I would like to be able to have it automatically copy the changes to another workbook.
View 2 Replies View RelatedI want to copy and paste from one sheet to another based on column a using a macro copy button.
E.g. if column a value = apple then copy that row into the apple sheet.
How I use the Private Subs for Workbook_AddInInstall and Workbook_AddInUninstall with my addins and confirm it is nececessary to use them?
For 2 weeks, I have not been able to get my addins to activate and load into the AddIns tab. I think these missing Subs are why. Ironically, Every example on how to create addins never mention this step or it being necessary. I've even looked in Macros book and it does not mention anything about needing these subs in the Creating AddIns section so they will show up in the AddIns Tab.
How I can get my Addins in the tab and not the Quick Launch menu
I want this macro to find in this case "406" in column A which is at the very end of the last block of 160 rows of information.
I then want it to move up 159 rows and copy 160 rows of information underneath the last block of information.
i.e.go to A5280 , then go to a5121, copy rows 5121:5280 to 5281.
It falls over on the very last line of code I can see A5281 selected but it won't paste....
I lost my command bar and tool bars (excel 97) all I have is the blue bar on top then the column letters. How do I restore them?
View 9 Replies View RelatedI would like someone to explain the reason why when the program is run, the maximum value in column S successfully is selected by being colored in pink, but the minimum in column R between those pink max's (indicated by the entire row outlined in red) is not the minimum.
In other words, look at the numbers in column R. Only the 14.08 rows are supposed to be boxed in red. I can't understand why the 30.08 and the 46.08 are boxed in red??? And puzzling to me is why the 46.08 near the top are boxed, yet the 46.08 near the bottom are not boxed.
The following sub will look in the file ("FY09 SOF"), in column "A", search for the strings that begin with "2109", "3009", or ends in "-1", and copy the entire row. It will then paste these in the file ("FY09 PR Log Blank").
I have found that in the file ("FY09 SOF"), if things are filtered in any row, it will not copy those necessary items.
The data filter is on row 13 of each sheet. Is there a way of fixing this? (i.e. having the macros select "all" on the filter before copying the sheet? There are 60 sheets so a macros will be necessary.
Sub get_data()
Dim wb As Workbook, wbDest As Workbook
Dim ws As Worksheet, wsDest As Worksheet
Dim lngCalc As Long
Dim FoundCells As Range
Dim FoundCell As Range
Set wb = Workbooks("FY09 SOF")
Set wbDest = Workbooks("FY09 PR Log Blank")
Set wsDest = wbDest.Worksheets("Paste all here, then sort")
With Application
.ScreenUpdating = False
lngCalc = .Calculation
.Calculation = xlCalculationManual
End With
For Each ws In wb.Worksheets.............................
I just want to have a column sorted by Z-A order and then A-Z by the same button, I recorded 2 macros on 2 buttons and tried to join codes with "if, elseif".
View 6 Replies View RelatedIs there any way that i could open and enter commands in ms dos
controlling from excel vba code?, like, say i wanted to change the current
directory in msdos from d: to c:, is there anyway that i could do it from
excel vba?
I have a template sheet where the only thing the user need to do is fill in all the appropriate cells and the click the button that says SAVE to save the file to the right folder and file name.
I want to Grey out the ribbon completely so that user can even change the font or any thing else for that matter. The sheet and workbook is protected. Need a way to stop any unwanted tinkering.
I have run into a problem with the Insert menu.
In the submenu
Cells
Rows
Columns
Worksheet
are "Greyed out" and therefore not available.
This happens when the application is first opened - no code is running it seems to be associated with the Personal workbook?
I have not encountered this previously.
IT help desk was its usual high standard - ZIP
I have searched this board without success.
The Microsoft Help functions were also silent.
Sub elaseval()
For each cell in Range(“B7:B50”)
Range("cell.Value").Select
Selection.Copy
Sheets("Input").Select
Range("$E$7").Select
Selection.PasteSpecial Paste:=xlValues, Operation:=xlNone, SkipBlanks:= _
False, Transpose:=False
Sheets("Sensitivity").Select
Range("C” & cell.Row : ”T” & cell.Row").Select
Selection.Copy
Range("C" & Cell.Row).Select
Selection.PasteSpecial Paste:=xlValues, Operation:=xlNone, SkipBlanks:= _
False, Transpose:=False
Next Cell
End Sub
I am trying to apply this set of commands to each cell in the range B7:B50. For each of these cells, I need "cell.Value" to refer to the value in the respective cell and "cell.Row" to represent the row of the cell that is currently being used.
I am trying to remove File Commands from this specific workbook and force save and send functions through command buttons.
This is the code I tried in the workbook module to remove file commands(Excel 2003):
__________
Sub Workbook_Open()
Dim a As CommandBar
For Each a In Application.CommandBars
Application.CommandBars(a.Name).Enabled = False
Next
Application.CommandBars("File").Enabled = False
Application.CommandBars("Edit").Enabled = False
Application.CommandBars("View").Enabled = False........
I have made an Excel sheet that uses ActiveX controls (Option Box and Check Box). I have included a couple of screen caps at the bottom of this post to better explain the layout. Here are the specifics:
There is one Option Box Group labeled "InputOptionGroup" with choices labeled: "FirstOption", "SecondOption", "RefundOption" and "NoneOption".
Adjacent to the Option Box is a series of Check Boxes that correspond to the choice made in the Option Box with the exception of "NoneOption". The Check Boxes are labeled "FirstCheck", "SecondCheck" and "RefundCheck". Each Check Box object belongs to the group labeled "OutputCheckGroup".
I do know that the value of the Option Box choices and Check Boxes can be either True or False depending on if it has been chosen or marked, but I do not know how to incorporate these values into the action script. With that being said, here's what I'm trying to accomplish:
...when "FirstOption" is chosen, clear values of all Check Boxes and place a check mark in "FirstCheck".
...when "SecondOption" is chosen, clear values of all Check Boxes and place a check mark in "SecondCheck".
...when "RefundOption" is chosen, clear values of all Check Boxes and place a check mark in "RefundCheck".
...when "NoneOption" is chosen, clear values of all Check Boxes (no furthur action).
Also, there are a couple more requests:Is there a way to lock the Check Boxes from user input? I want the Check Box values to be altered only by the choice in the Option Box.
Take the "GPIN" field, the one on the right is locked from user input. This particular cell references user input from the "GPIN" field on the left. Is there a way to return a blank value when the input field is blank insted of returning a "0"? If you notice, all fields on the right reference blank values as "0".
In the left "Amount" field, I need to display a "$" followed by the value in the input "Amount" field
I need to disable the "save as" file menu command when a user opens a shared document. Upon exit I want to enable the save as so that other opened worksheets are not affected. This code works: CommandBars("File").Controls("Save As...").Enabled = False
My problem is this. I can activate this command by selecting run in the VB editor.
But I need for this action to be automatic when a user opens the worksheet. I did this in the editor:
Under general
Sub dISABLESAVEAS()
CommandBars("File").Controls("Save As...").Enabled = False
End
Sub WORKSHEET_BEFORECLOSE()
CommandBars("File").Controls("Save As...").Enabled = True
End
I've received an Excel file with the below macro. However, I've made changes in the original file and therefore, the macro isn't working anymore except if I copy paste special the value instead of simply copying it. I would need to change the macro accordingly.
The macro is the following :
Sub CCtosheetwithoutformat()
'
' CCtosheetwithoutformat Macro
[Code]....
I want to accomplish a few things in one cell. The basics are this:
I want to pull the lowest numbers from a given sample. The sample needs to have a time component (10 lowest out of the most recent 20 results). Those numbers are to be averaged. That average is to be multiplied by .96, then that final yield needs to be truncated to 1 decimal.
Now, I'm not sure this is possible or not. But, if it is, I want to also select the amount of numbers I pull from the sample to average to be based on the sample size itself. For example, if there are 10 results in the sample size, I only want to average the lowest 3 of the 10.
Is it possible to formulate all of these rules into one cell?