Check Data For Changes In Multiple Columns And If Changed Copy To Another Sheet
Mar 8, 2014
This is my basic setup, each piece of equipment will have more than one routine to be performed:
Equipment Type
Make
Model
Serial
Location
To Be Performed
Frequency
Last Performed
Performed By
Next Due Date
R1
[Code] ..........
I want to track changes on "Last Performed" and "Performed By" and, if changed, copy both values to a separate "log" sheet. In total, there could be up to 10 routines for each peice of equipment. That means I would need to track 20 columns for changes. I would like this check to be done on save because that ensures that the user is satisfied with their changes and keeps the log from being flooded. And lastly, it needs stored in the log sheet in a way that I can identify which piece of equipment it was for and which routine was done.
View 1 Replies
ADVERTISEMENT
Jul 27, 2013
I am working on a project to automate the import of data and fixing the formatting.
The data contains the date in column A and time in column B. The time is in increments of 15 min for each day. The rest of the data is in columns C:F. Some of the dates don't have all of the times within the day (so instead of 96 rows of data per day, there maybe 80 rows). I have a second sheet of just dates and times that has the correct amount of rows for each day. What I need to do is have the rows data that matches in both the date and time column from sheet 1 copied over to the corresponding date and time on sheet 2. Blank data rows on sheet 2 are fine. I have found some stuff on .Find, but the stuff I found was for specific searches.
Example
Sheet 1
7/27/13 12:00 AM 1 2 3 4
7/27/13 12:15 AM 5 6 7 8
7/27/13 01:00 AM 9 10 11 12
Sheet 2
7/27/13 12:00 AM 1 2 3 4
7/27/13 12:15 AM 5 6 7 8
7/27/13 12:30 AM
7/27/13 12:45 AM
7/27/13 01:00 AM 9 10 11 12
View 1 Replies
View Related
Jul 7, 2009
I have multiple sheets Names(Sheet1-Sheet5).
Im trying to compile them all on the same sheet (Main Sheet). But each sheet is NOT the same. I need to choose what Columns needs to be copied (I can use one macro for each tab if needed)
For example I need Sheet1, Columns (A,C,E,G,S) copy that and then go to (Main Sheet) and paste in the next blank line (column A)
Seems like it does not know where to paste.
Here is one I have tried ....
View 9 Replies
View Related
Nov 15, 2012
Any formula that can look at the data in multiple columns and check for a match - returning a value such as YES or NO. Below is an example of my sheet.
A
B
C
D
E
F
G
1
Name
Number
Name
Number
Name
Number
Match?
[Code] ..........
Basically the formula would be in Column G and would look at B, D, & F to see if they match or not. In the example above - row two - they all match. So a True, 1, or Text option such as YES would be great. Same as row 3 only you can see they are different.
View 5 Replies
View Related
Jul 23, 2013
I need to copy multiple rows in a spread sheet with a forloop. The problem is I only need a select few columns. A:C and F:H. When pasted into a new sheet I need to columns to come in A:F
I have a loop that does this already but it is huge and is slowing down my file. Here is part of it.
Sub MinerInfo()
Application.DisplayAlerts = False
Application.ScreenUpdating = False
resultsRow = 2
[Code]...
View 4 Replies
View Related
Aug 21, 2013
Here's what I have:
A workbook with 40 sheets, each sheet has data in A:B with varying numbers of rows. A and B have headers in each sheet.
What I want to do:
Have a summary sheet in the same workbook of all the sheets in A:B
After some searching and my limited VB skills, I found a way to copy each column into the summary but to the right of the next column. I need it to be continuous in A:B
Sub Create_Summary()
Application.DisplayAlerts = False
On Error Resume Next
Sheets("Summary").Delete
Application.DisplayAlerts = True
n = Application.Worksheets.Count
[Code]...
View 4 Replies
View Related
Aug 11, 2012
I have a workbook with many sheets labelled as mmm-yyyy. The constant columns in all the sheets are C,E,R,T, and U.
Is it possible to have a macro do the following: Add a sheet called Summary at the end of the workbook. From the last sheet of mmm-yyyy, copy columns C, E, and R to the Summary sheet. Copy columns T and U from all the other mmm-yyyy sheets to the Summary sheet. All the cells need to be centered.
View 3 Replies
View Related
Jan 15, 2009
I have attached a 97-2003 .xls file with data for multiple store locations on sheet 1, and the desired result on sheet 2. I am actually using excel 2007, but I dont think I need any special features that it provides.
I will try to explain the issue here without opening the attachment.
Here is an example of the Data on Sheet1
View 13 Replies
View Related
Jun 1, 2009
I am trying to copy rows that match a date range but I only want some of the columns to be copied to a pre-defined sheet.
For example, if the row is selected as a match because it is within the desired date range, I want the data in columns 'A-F', 'I-J','N-O' to be copied to the sheet 'Report' starting in 'A3'.
View 12 Replies
View Related
Jun 9, 2007
I want to import data with a web-querie. The data consists of numbers in a column (14 cells).
I want to poll the info in the table in the webquerie every 15 minutes to see if the info in the table is changed. Therefore I refresh the info every 15 minutes, and when the info is changed, than the data must be put in a new sheet in a column and the columntitle must be the date and time that the info is put into the column. Can this be done in vba? I suppose that to compare the info of the new poll with the info of the previous polling the previous info must be put in a "compare" table.
View 4 Replies
View Related
Feb 18, 2014
I am trying create a macro that will create a new work sheet on an existing workbook. I have minimum experience writing a macro, but I do know how to effectively record one. The issue is, I need the macro to copy multiple columns down to the end of the data and pasting it into the new workbook at the end of the data already pasted-- rows of data are frequently added to the workbook.
View 4 Replies
View Related
Jan 10, 2009
How can I copy a column (C6:C200) and paste it according to a cell value . If I have in a cell 5 it will paste column (C6:C200) five times .
View 7 Replies
View Related
Sep 7, 2007
I found this treat but it didn't help me as i hoped. Move Data From One Column To Multiple Columns. I try to convert multiple datablocks to a new worksheet and make the adress blocks ready for further sorting and removing actions. The Excel I use is Dutch and i hope that i make my question clear. What I want:
copy each adressblock to another worksheet, put the initals as well as the beginning in a seperate column and delete the unnecessary comma's. Each adressblock is identified by a number in colom A. When a new number is shown, excel has to start a new line to fill. finally,if possible i like to extract the adress line into seperate colums of "street+numer", zip and place. Some adresblock have more than onder adres, if possible i want excel to ad these information in the 'extra' colums.
View 2 Replies
View Related
Feb 20, 2014
I have a spreadsheet with a heap of raw data in it. I need to perform a search based on a customer name, then return certain columns from the raw data IF the customer name is matched in one column, AND a special flag name is matched in a second column. The customer name is always a single entry for the purpose of the query, however the special flag must be checked against a possible list of values in a table. I know this is hard to explain, and I can't add attachments to my posts, so I have created a sample document and placed in in dropbox:
[URL] ........
View 9 Replies
View Related
Nov 26, 2007
I would like to count al the rows where in certain columns there are certain values.
For example:
=SUMPRODUCT(--(Bakjes!$C$2:$C$4000="1");--(Bakjes!$G$2:$G$4000="")
This works fine. However, I would like to look in columns N2:W4000 as well if in that specific row value x is present. This gives:
=SUMPRODUCT(--(Bakjes!$C$2:$C$4000="1");--(Bakjes!$G$2:$G$4000="");--(Bakjes!$N$2:$W$4000="x"))
This gives a #value error. Is it not possible to look in multiple columns at one time with sumproduct?
View 9 Replies
View Related
Jan 29, 2012
I have one sheet with 25 tables in it, And i want to extract the whole row from this sheet to another sheet based on values ( Office1, Office2, Office3, Office4 ) if appeared in thrid column "C".
- the 25 tables created on the 1st sheet to be in the other sheets as formatted as well.
- once "Office1" appeared in the original sheet in the 1st table, Action : copy the whole row to sheet named "Office1"at the top row in the first table.
- once "office1" appeared again in the original sheet in the 1st table, Action: copy the whole row to sheet named "Office1"at the 2nd top row in the first table.
- once "office1" appeared again in the original sheet in the 2nd table, Action: copy the whole row to sheet named "Office1"at the top row in the 2nd table.
- and so on, the same with other 3 remains sheet.
View 5 Replies
View Related
Nov 18, 2013
I have a workbook with four tabs or four sheets.
Tabs 1, 2 and 3 have a column of data (Column A) on each sheet. They all start from the same cell. Each cell of data are just numbers. The column (an array) of data will not have blanks between.
But, they are not the same number of data. They vary.
Meaning, Tab 1 may have 15 numbers (A1 to A15), Tab 2 may have 20 numbers (A1 to A20) and Tab 3 could have 5 numbers (A1 to A5). Each iteration of the workbook may have different number of data in the A column on these tabs.
Now on Tab 4, I want combine the data from all three tabs into one column (in column A).
So, Tab 4 has a column A with data from Tab 1 copy and pasted to (A1 to A15) as values, then (A16 to A35) have Tab 2 data copy pasted as values and (A36 to A40) have Tab 3 data copy pasted as values.
Basically, the macro on Tab 4 has to count the number of rows on each Tab that are populated with data values and figure out to copy all the data on Column A from each three tabs and paste the data value into the Tab 4 in one column of data (in values).
View 6 Replies
View Related
Feb 5, 2008
trying to copy data from multiple sheets to one single sheet. I am pretty sure this is possible. The problem I am running into is that the number of sheets at any given time is dynamic. The numbering of the sheets is from 000 to 999 (they must be a three-digit code). The other issue I am having is I only want to copy the rows in each sheet that have an "x" in column "A". Also, the row in which the first "x" occurs can differ from sheet to sheet. I have attached a copy of the spreadsheet that indicates how the spreadsheet is layed out.
View 13 Replies
View Related
Nov 3, 2008
I have multiple .xls sheets in a folder. C:Documents and Settingsu369875DesktopProject stuffTestin Save_ASCompleted History. And need to copy the data in all of them and paste them into a new sheet (one main sheet) in this folder...........
View 2 Replies
View Related
Jan 23, 2009
I recieve a daily spreadsheet with ~25,000 rows of data and is 4 columns wide. Each day I need to break the data equally up into 19 or 20 different sheets within the same workbook. This is very time consuming as I need to copy the first ~1,000 rows and paste it into the first sheet, then I need to take the next ~1,000 rows and paste it into the second sheet, and so on.
I have attached a small example with desired output. In my example, the raw data file contains 19 records. For these 19 records, I need to distribute the records evenly between 5 individual sheets. In this case, each sheet will contain 4 records or less.
View 5 Replies
View Related
Sep 26, 2013
I have a workbook with 10 sheets.
Each sheets has data starting row 14 and column B with row 13 being column Headers.
I want to copy data from each sheet, having column headers suppose A, F & G in to a single sheet. The position of column headers I want to copy are different in each sheets
Means macro will go to sheet1 first, he will copy data from column headers A, F & G and paste in new sheet suppose main.
then macro will go to sheet2, he will copy all the data from column headerA, F & G and paste it in main sheet after the last used row and so on.
View 8 Replies
View Related
Apr 24, 2008
I have been trying to make a code that copies all the data in A2:K50 in all the sheets (about 32 of them right now) and paste that information in 1 sheet (Master List). The code does work but for some sheets it only copies the first 2 or 3 records. Also, this code puts the name of the sheet the data came from but for the first 2 records in puts in the Master List its pasting the wrong Sheet name.
Sub SummurizeSheets()
Dim ws As Worksheet
Dim lastRng As Range
Application.ScreenUpdating = False
Sheets("Master List").Activate
View 9 Replies
View Related
Apr 30, 2014
I'm trying to create a database which can analyze data for my thesis.
The idea is the following:
I have all data saved on multiple work sheets in one workbook.
I would like to use the find function and when I search for specific data this is either summarized in a new sheet or else can be printed.
View 1 Replies
View Related
Dec 23, 2008
I have a multiple rows of data, but one column which is K has data like:
1020
1020
1020
1020
1020
1030
1030
1030
1030
1050
1050
1050
What i want my macro to do, is whenever that number in column K changes to copy all the data in row A thru K to a new sheet.
View 9 Replies
View Related
Feb 20, 2007
I have a command button that copies a template worksheet and names it with a date that the user chooses. Problem is, the user can choose the same date more than once. So, I need to have the command button check for all the sheet names, and if it finds a duplicate, prompt the user to enter some text to concatenate to the original sheet name, therefore making it's name unique. My existing code is as follows:
Private Sub CommandButton1_Click()
MsgBox "Please be patient. Creating a new Week Ending sheet can take several minutes!"
Call AddNewWE
End Sub
Sub AddNewWE()..............................
View 3 Replies
View Related
Aug 14, 2014
Following is my query:
There are two workbooks , Workbook1 and Workbook2
Workbook1 has only 1 sheet (Sheet name is Final) with multiple rows Tiger,Lion,Goat etc..
Workbook2 has multiple sheets (Tiger,Lion,Goat .... so on)
Each sheet Tiger, Lion, Goat has different no of rows but same no.of coloums.
I want to copy the data from all the sheets in Workbook2 to one sheet Workbook1
ie., once i execute my macro the final output in Workbook1 should contain Tiger under that all the rows from sheet tiger(Workbook2),Goat under that all the rows from sheet Goat(Workbook2) ,Lion under that all the rows from sheet Lion(Workbook2).
Here rows should be inserted in Workbook1 and in these inserted rows we should copy data from respective sheets of Workbook2
View 1 Replies
View Related
Feb 16, 2012
We have a company and need to automating workflow.
The Master sheet contains incoming mail details by customer. Each employee is assigned a set number of customers to respond to. We want the information on the Master sheet to filter to a specific employee assigned sheet. On the employee assigned sheet, once filtered, they are to provide updates in column E
Date
Reference no.
Name
Employee ID
16-Feb-12
S/S/1
[Code] ........
We need a macro that can filter customers' details to the specific employee assigned sheet based on the employee ID in the master sheet. For example, all customers assigned to DW (i.e with the 'DW' employee ID) filters into a sheet called 'DW'. Please note that the Master sheet is a continuous log updated daily. This macro must not duplicate information previously filtered once the employee enters a status update in column E.
View 2 Replies
View Related
Jul 9, 2014
I need to make a excel costing model to calculate various products prices. I am using Excel 2010.
I have many products and do not need all of them displaying at the same time, therefor I inserted a Checkbox (ActiveX Control) that hides my columns that I do not need. I did that by inserting the following and it works fine :
[Code].....
The problem is I now need to lock certain cells so that they can remain fixed and the recipe cannot change.
Once locked my checkbox no longer works and I get the following error :
"Run-time error '1004': Unable to set hidden property of the range class"...
View 1 Replies
View Related
Oct 28, 2008
I need a macro that would sort out the true value in column A, and paste it to another sheet (range A77)
View 10 Replies
View Related
Oct 23, 2013
I have an excel document with hundreds of columns. Each column should not be empty; they must have at least one value. Right now I'm applying a filter and going through each column one by one to make sure that it is not empty. How can I perform this check without having to go through each column one by one?
View 6 Replies
View Related
