I have a workbook that I am working on. On the sheet "Scores" the range Q109 show the date, range Q107 shows a numerical value. If the date changes and the value in Q107 also changes I would like the new date and value to copy/paste into another sheet called "Changes", the date would paste into cell B5 and the new value for range Q107 would paste into the Changes worksheet cell "C4". The Date will change occasionally and so will the associated value so when this happens I would like it to paste into the next available row.
I have a spreadsheet of donations and the dates on which they were made. I input the dates like so: 1/2/2009, and then I format the cells so they appear like this: January 2, 2009. When I use this date in for MS Word "mail merge" functions, the date shows up in its unformatted formula bar form: 1/2/2009. I would prefer that it show up like January 2, 2009.
My question is this: is there any way I can change the cell formula bar to read like the formatted version rather than the non-formatted version? I want the formula bar to read "January 2, 2009" instead of "1/2/2009". Obviously I could type each date manually into the formula bar, but I'm looking for a quick copy/paste solution since there are hundreds of cells. I've messed around with "paste special" options to no avail.
I have workbook with 2 sheets. Worksheet1 has a date by formula (Today()). Worksheet2 has dates listed in column A. I want to write a macro that will check that the date in Worskheet2, Column A matches the date on Worksheet1 then pastespecial -value from e2 on worksheet1 to the adjacent cell column B worksheet2. This is to create a log for changes over time. I have a macro that pastes to the first empty cell column B worksheet2 but I can not get the date correct.
This code basically copies data from one worksheet to another worksheet based on the date and works great.
However, I have been asked to changed the format of the spreadsheet and the code needs to be changed. The code is in "This workbook".
The code takes the data from the summary tab and copies it to the archive tab. I now need it to take it from the summary tab and copy it to the archive 2 tab.
I have attached a copy of the spreadsheet. Data and Archive2.xlsm‎
I need a Macro that can look in column A to find the date, and then drop down one row and move to column B and then copy the data in that cell to column C back up one row.
I've attached the workbook so you'll know what i'm talking about. I need the green cells to be moved to the blue cells all the way down.
COLUMN A =Date COLUMN B =Empty Row COLUMN C=Copy Details COLUMN D=Paste Details
I have data on sheet-1 ("MEAL CHART") that I copy over to sheet-2 (Nutri_DB) daily. The macro below is working for me when I post the data the same day it is recorded. However, I frequently need to post my data the day before or day after it is recorded.
I would like to modify my code below so it copies/pastes the data based on the date in cell B1 (Named range "DATE") not the actual date (today()).
I'm trying to develop a simple time / acitivity capture sheet for a time and motions study. I have a sheet called "Front" with a project number in C2, an activity drop down in C4 and a comments section in C6.
I need to paste these into sheet "Database" into the first blank cell in B:B for C2, C:C for C4 then stamp the date in the same row in D:D and the time in E:E.
I need to extract a number of cells, based on the date of another cell and then past these values into a column on anther sheet. Example: Sheet "Name1" in Column "G" is where I want the values to be pasted.
Sheet "Name2" has the dates in Column "B". I wish to extract the entries in Column "K" into Column "G" on Sheet "Name 1". I also have another Sheet, "Name 3" which has the the date field in column "B" and the entries I wish to extract in Column "K"and pasted in column "G" on the "Name 1"sheet.
The date range I'll be looking to past is by Month and year. The date fomat is dd/mm/yyyy.
I work for a chicken hatchery. So, a couple preliminary things by way of explanation:
1. The day we place our eggs in the incubators, we fill in an excel file containing a list of all the farms from which those eggs came. This is called the "Egg List" workbook.
2. After 21 days have passed, and the eggs have turned into chicks, we open that original file. We copy cells from one column of that file (the workbook is called the “Egg List”, we copy “Sheet1” cells B7:B50), and paste them into another Workbook called “Chick List.”
My question is this:
Is there a macro I can put into the “Chick List” workbook that will automatically locate that particular “Egg list” workbook file that is 21 days old, and paste the contents of its cells B7:B50 into cells A7:A50 in my “Chick List” Workbook. It is preferable if this can be done without opening the old “Egg list” file. But if this is not possible, I’ll take whatever I can get.
Here is what I have, which works okay as far as finding the file. I bootlegged this from another part of this helpful website. But I cannot figure out the syntax for getting cells B7:B50 from the Egg list to copy into cells A7:A50 of the Chick List.
Dim FSO As Object
Sub ProcessFiles() Dim i As Long Dim sFolder As String Dim fldr As Object Dim Folder As Object Dim file As Object Dim Files As Object Dim this As Workbook Dim cnt As Long Dim filenew As Object
Is it possible to have a macro copy a range of cells (A1:K1) and place it in the next empty row? My first row has formulas in it to grab information from a separate sheet within the same workbook with special formatting so I can import it to another program. What I want to be able to do is take that first row, use my macro button to copy and paste (only text, not the formulas) the information into row 2, then when the information changes in row 1 with new information (from the other sheet) it will copy and paste the new information into row 3 and so on.
creating a VBA that will scan my entire sheet and any cell with a date before todays date, the entire row will be copied and pasted to another sheet. and it should search every cell in sheet 1 and paste all rows with dates in the past. if there is more then one cell in a row with the date in the past, that row will copied only once.
I'm trying to get a VBA code that will allow me to copy and paste rows based on a date range, for example
Column A = (Blanc) Column B = Line Number Column C = Date
[code]....
i need to have a pop up box that i can input the start date and then another pop up for the end date (mm/dd/yyyy), then using these dates copy the whole row which are within the date range to another sheet called Summary.
I'm exporting a csv file from a membership database with the attendance of members. With a macro i open the file and copy the contend to excel. With the macro the column for the date has *randomly* wrong formats. Example the date in column B:
Aasia Tallah19-03-2009 19:33 Aasia Tallah17/03/09 7:49 pm Aasia Tallah15/03/09 7:53 pm Aasia Tallah14/03/09 6:34 pm Aasia Tallah03-12-2009 20:05 Aasia Tallah03-11-2009 19:56 Aasia Tallah03-10-2009 19:54
I try to change the format of the column, but that does not work. Rows 2,3 and 4 seem to be text but they are not. If i access the edit bar for example the 17th of march and store without changing anything, it changes to the format of the first row. That is how i want it. If i copy the column by hand, every thing is fine.
All of the following i tryed: - format date column of the csv before copying... failed - copy special with only pasting values... failed - preformat the column i paste the date to... failed - delete the sheet i paste to and create a new one... failed - copy the macro to a new workbook... failed
Some of you may have seen my 2-dimensional Date Range Criteria thread . By request, that thread has been closed and I am opening a new one on a related, but infinitely more complex note.
The solution to the previous thread worked, but not well with my project. I'll go a little more in depth into how my project works, and try not to be too detailed and irritating.
I am trying to create a homebrew Learning Management System for some of the Training courses that my department offers. I've posted here a few times on the same project, and the advice from all previous posts has been excellent.
What I have so far allows users to input all of the relevant information about a participant, and then keep track of the dates when they took a particular course. They input this information with a Userform. This data goes into a Participant Master List, which is where the majority of the functions take place. There is a Workings sheet set to xlVeryHidden, which houses some other information, including results for searches, and finally there is the Report Template--the source of my original question.
The original question was how to make a formula that would track how many people from each department and site have attended training within a date range. That question was answered in the 2-dimensional Date Range Criteria of the report.
What makes it potentially more complicated is that a user might want to generate two or three reports at the same time to compare side-by-side. I'm pretty sure I can make something that will do this, and allow it, but the way it's looking could be really complicated--extreme headache, and a lot of VBA coding.
I need macro to copy values from a Master worksheet on a daily basis, and paste them to multiple individual worksheets in cells adjacent to today's date (already crafted). For instance, a value of 8 is entered into a particular cell in the Master, it is copied and pasted into column E of another worksheet, on the row with today's date already written in column B. I need to do this repeatedly for over 50 worksheets.
I am trying to develop a macro that allows the user to copy and paste a set of date and time values, move them to the next sheet and increase the month by 1. I need help trying to find out how can I create a counter for the program to keep running without the need to reprogram the macros again.
1. Start w/ "RULE-Table" sheet, 2. Take note of "TODAY" date, 3. LOOKUP date in "RULE-table" 4. Locate Coordinates found in Col D of RULE-Table, 5. LOOKUP the data that resides in those Coordinates on the "PRODUCTION" sheet & COPY 6. PASTE data into "REPORT" tab C2 and E2.
Here's an example to visualize:
Code will do everything it needs to do within an Undisclosed OPEN file with several sheets. The reason the Workbook file name is undisclosed/undefined is because the file name will vary based on clients, so I don't want the code to be limited to look for a specific filename.
*The sheet names within this OPEN client file will always have the same names.
The sheet called: "RULE-Table" holds coordinates based upon "TODAY's" computer date. For example: If today is JAN 4, the desired coordinates to pull data from are "B5" and "D10" from the "PRODUCTION" sheet.
Since today is 1/4, its rules say go to B2 and D10 of the PRODUCTION tab and collect the data
"PRODUCTION" (data source) sheet (within the same open file) A.......B......C....D....E....F... Row1..Header..Hdr..Hdr..Hdr..Hdr. 2.......2................................. 3.......14............................... 4.......13............................... 5.......20............................... 6.......62.............................. 7....................76................. 8...................184................ 9...................375................ 10.................410................ 11.................525...............
Last, the collected data from those 2 coordinates should always get pasted onto the "REPORT" tab into C2 and E2 in this example.
"REPORT" (destination) sheet (within the same open file) A........B.........C.....D....E..... Row1..Header..Hdr..Hdr..Hdr.. 2...................20........410......
On sheet "CoA" i have at table of periodic payments that is created via an input form and what I want to do is have accounting entries automatically generated in my cask book based on dates.
I have on sheet "Charts" in cell "B20" a "date from" and in cell "C20" a "date to" (these will be input manually).
What I need is to check Column "F" on sheet "Report" for any cells within those dates, I then want to copy the entire row(s) that contain these dates and paste them into sheet "Weekly" starting at cell "A2".
I've attached a workbook which contains two sheets: PAYM DEVICE_PAYM
Data is updated on DEVICE_PAYM each day with the figures I need located in column "AN". I need to be able to copy the data from "AN" and paste it into a column on the PAYM sheet. The destination column on the PAYM sheet needs to be specified by inputting a specific date - ideally, I would like to use the calendar Add-In as part of this process. I've already input some code for the calendar but am unable to develop this further so that it finds the correct date column and pastes the data across from the other sheet.
1. Copy cells B5 to V-First blank row in Strength Tests worksheet 2. Paste cells into Racks worksheet in cell C5 3. Change font size to 6 4. Sort by Column T descending then by Column C ascending 5. Copy one row (A5-W5 (1Rx23C)) from Racks worksheet 6. Paste row into M1 worksheet in cell D4 7. Print M1 8. Drop down one row on the Racks worksheet 9. Repeat steps 5-8 until there's a blank row.
I need to build a macro which copies 3 rows every day and pastes the row data into an identical sheet. The three rows will have column "D" as =today(). As the days progress the three rows will change accordingly ( tag to the today's date)
e.g. 28/1/2014 28/1/2014 28/1/2014
I need the macro to recognize the date when pressed and copy the corresponding rows of data and paste them into an identical sheet with the same date. The second sheet is an archive sheet. The date will tick over as per the calendar.
I have a cell with both date & time "10/9/09 3:15" This is put in the current cell by formula which indexes two dif. cells, Now I am trying to copy this cell and paste into another book but like to have only date. How can I do that? Each time I try it gives me the time value in the pasted cell and I cannot even format it.
I would like to implement specific cell ranges from two specific worksheets each within 33 workbooks (which all have several tabs) into a summary page in a separate workbook.
The cell ranges are going across my spreadsheet in rows and I would like for them to transpose into a columns depending on the data which I have separated by catergory on the summary page. They are all on the same location in each workbook which is separated by country. The cell ranges are E26:P37 and I would like to transpose them and have them put below eachother without overwriting for my format on the summary page, how I can put this together in a macro?
Attached is my code, pay attention to the bold part. I want the sourceSheet to be copied as a sheet and pasted in the targetSheet (the Sheet2 of "NewBook") but I want it pasted asvalues. Here is the specific part which needs to be looked at...and below is the full code.
VB: Set sourceBook = Application.Workbooks.Open(sourceFilename) Set sourceSheet = sourceBook.Sheets("Current") Set targetSheet = NewBook.Sheets("Sheet2")
On the "Complete Backlog" tab of my workbook, I want users to enter in the requested information based on the column header. Then I would like a Macro attached to a button that says "Refresh" that the user would click after they have entered in all of the information. This macro should look in Column M (WIP Status) and if any of the cells say "Close", it should Cut the entire row from the spreadsheet(Ex. A2:M2) and Paste it into the speadsheet titled "Closed Jobs".
This is so that as jobs are closed/finished, they are removed and stored on a separate sheet. The items would have to be pasted so that it pastes into the next available row - not just on top of each other.
I also need another macro that i can put into a button that doesn't "delete" a row from the sheet, but just copies over to another sheet - so that there are two instances in the workbook.
If would look something like: If a cell in "Column G / Director" of the "Complete Backlog" speadsheet is equal to "Snodgress" then copy columns A-L of the same row to the spreadsheet titled "Snodgress" - of course skipping down the rows to the next blank row.
.....is equal to "Herr" copy row to "Herr" spreadsheet. ....is equal to "McCormick" copy row to "McCormick" spreadsheet. and so on.
