creating a VBA that will scan my entire sheet and any cell with a date before todays date, the entire row will be copied and pasted to another sheet. and it should search every cell in sheet 1 and paste all rows with dates in the past. if there is more then one cell in a row with the date in the past, that row will copied only once.
View 14 RepliesExpanding this code to make it do the following:
1. Start w/ "RULE-Table" sheet,
2. Take note of "TODAY" date,
3. LOOKUP date in "RULE-table"
4. Locate Coordinates found in Col D of RULE-Table,
5. LOOKUP the data that resides in those Coordinates on the "PRODUCTION" sheet & COPY
6. PASTE data into "REPORT" tab C2 and E2.
Here's an example to visualize:
Code will do everything it needs to do within an Undisclosed OPEN file with several sheets. The reason the Workbook file name is undisclosed/undefined is because the file name will vary based on clients, so I don't want the code to be limited to look for a specific filename.
*The sheet names within this OPEN client file will always have the same names.
The sheet called: "RULE-Table" holds coordinates based upon "TODAY's" computer date.
For example: If today is JAN 4, the desired coordinates to pull data from are "B5" and "D10" from the "PRODUCTION" sheet.
"RULE-Table" sheet
A......B.........C................D.......
Row1.DAY....WK RANGE....QTR RANGE
2......1/1.......1...............B2,D7
3......1/2.......1...............B3,D8
4......1/3.......1...............B4,D9
5......1/4.......1...............B5,D10
6......1/5.......1...............B6,D11
Since today is 1/4, its rules say go to B2 and D10 of the PRODUCTION tab and collect the data
"PRODUCTION" (data source) sheet (within the same open file)
A.......B......C....D....E....F...
Row1..Header..Hdr..Hdr..Hdr..Hdr.
2.......2.................................
3.......14...............................
4.......13...............................
5.......20...............................
6.......62..............................
7....................76.................
8...................184................
9...................375................
10.................410................
11.................525...............
Last, the collected data from those 2 coordinates should always get pasted onto the "REPORT" tab into C2 and E2 in this example.
"REPORT" (destination) sheet (within the same open file)
A........B.........C.....D....E.....
Row1..Header..Hdr..Hdr..Hdr..
2...................20........410......
On sheet "CoA" i have at table of periodic payments that is created via an input form and what I want to do is have accounting entries automatically generated in my cask book based on dates.
The code for the input form is as follows;
I would like a macro that will go to a fixed sheet, copy the format, go back to the previous sheet and paste the format. My problems arise going back to the previously activated sheet rather than just a fixed sheet.
View 2 Replies View RelatedI have information across 5 cells what I want to say is if P3 is not equal 00/01/1900
Then copy and paste values of P3,Q3,R3,S3,T3 in a new sheet in cells P3,Q3,R3,S3,T3.
If a cell has not been filled in by its "Completion date" I want it to flag as Urgent in the Status Column. How do I do this?
Ref
Action
Appendix
Status Click
Opening Day
Complete by Date
1
Site Allocation to New Openings Manger
18/03/2013
28/05/2012
I am very new to VBA and am trying to make a spreadsheet that has a data page and page 1. I would like the row from the data page to copy and paste into page 1 if column A=07-01 Carbonated Soft Drinks . Here is an example of the sheet. I usually use formulas for my spreadsheets and just could not find one for this.
View 2 Replies View RelatedI have data in Excel like below in excel sheet Need To copy and Paste each ROW
Need to Paste Each ROW in new sheet1,sheet2,sheet3. one by one.
A B C D E
1 Sri 89 H6 YES No
2 Pri 90 K1 No Yes
3 Lio 87 G5 No Yes
Need to copy above data In new file new Sheet need to paste in Particular Cell like below.
A1 Data in C2
B1 Data in D2
C1 Data in E2
D1 Data in F2
E1 Data in C4
I have data on sheet-1 ("MEAL CHART") that I copy over to sheet-2 (Nutri_DB) daily. The macro below is working for me when I post the data the same day it is recorded. However, I frequently need to post my data the day before or day after it is recorded.
I would like to modify my code below so it copies/pastes the data based on the date in cell B1 (Named range "DATE") not the actual date (today()).
I have a line of code that returns a run-time error 1004 whenever it is passed through. All I am trying to do is copy and paste. I am missing some glaring error? (It is only a selection of the code to highlight the part I am having issues with. "maxdate" and "d" have been set)
VB:
Dim ws, ws1 As WorkSheets
Set ws = ThisWorkbook.Sheets("Data")
Set ws1 = ThisWorkbook.Sheets("Target")
[Code].....
using VBA and most of what i know has come from reading through blogs. I'm trying to copy 5 separate pieces of data from one row on our Payroll sheet and paste this in to another sheet call master dump.
The issue that i am having is that the code i have written keeps coming up with a run time error 1004 at the line "a.Select"
What i need the code to do is this: Copy the data from cell A4 and paste this on to another worksheet in to row cell b2, date worked in to d2, pay code in ot f2, hours in to h2 and the cost centre in to ad. all on the same row. i then need it to move on to the next team member (in this case A5) and repeat until there is no emp#. once the monday is done it will need to move onto Tuesday.
Code below.
Sub payroll_data()
'
' Payroll_data_MON Macro
Dim a As Range, b As Range, c As Range, d As Range, e As Range, i As Range, j As Range, k As Range, l As Range, m As Range
Set a = Range("A4")
Set b = Range("I4")
Set c = Range("G4")
Set d = Range("H4")
[code]....
I need macro to copy values from a Master worksheet on a daily basis, and paste them to multiple individual worksheets in cells adjacent to today's date (already crafted). For instance, a value of 8 is entered into a particular cell in the Master, it is copied and pasted into column E of another worksheet, on the row with today's date already written in column B. I need to do this repeatedly for over 50 worksheets.
View 2 Replies View RelatedI have a workbook with two sheets. The idea behind the workbook is an Interview Guide to be used just before an Interview. For now my problem is this.
Sheet 2 "Competencies" is just data. It stores competencies with their associated definitions and questions.
Sheet 1 "Control Page" is the sheet where the questions will eventually go. The user (Interviewer) will input data on the first two pages which will include name of candidate, date of interview etc. but they will also select 5 Competencies from the already existing drop down menus on page two. From there as the selections are made I wish for a code to copy the corresponding definition on sheet 'Competencies" to cells lower down in sheet "Control page".
I don't see a place to upload a file as I have a sample of the sheet ready to go.
I have the following code in another workbook that is used to populate a cell on the same sheet based on input to cells in column 'A'.
Is it possible to modify this for the attached workbook to select a cell with data (numbers) on the Input Data sheet in column 'E', add text to the beginning, ('CG' in this case), and paste the result to the Import Template in the corresponding cell of column 'A'? I currently have a formula copied to dozens of cells in 'A' but since the number of rows for the Input Template is variable, there are usually cells in 'A' that contain CG but no corresponding data in the rest of the row.
I use an excel time sheet for my employees and I am wanting to use a command button to copy data in a cell from worksheet1 to worksheet2. The cell that will be copied from worksheet1 will always be "S14". I want to copy that data to another worksheet and have it paste the data in the correct cell. The code needs to find the employees name in worksheet2 and paste the data in the next blank cell. Currently the command button I have works perfectly but I have to use the specific range, I would rather have the code seek out the employees name on worksheet2 so that I don't have to worry about specific row/column ranges. Is it possible? I'm sure it is. I have attached what worksheet2 looks like.
Rather than having to use .Range("A4:AA4") I would prefer to have the code find the employees name.
Attached file: Book1.xlsx‎
I need to copy a couple cells from sheet2,3 and 4 to sheet1 depending on value of cell a2 of respective sheets.
I have the basic code here, and what I think I'm missing is the adding row in sheet1.
The below codes can be all wrong by the way, YES, I do not have much knowledge in Macro.
[Code] .....
I want to copy the data in "Sheet1" without the header and paste it in "Sheet2" but only paste it in the first blank cells because i sometimes have data in "Sheet2". i would also like to paste it as paste special method when pasting. See attached for details.
View 7 Replies View RelatedI have a sheet that gets updated from external source. For e.g. the B2 cell of sheet updates the date and C2 cell updates the value as on that date from the external link. Since, the value of the cells gets updated every time I open the sheet, I want to copy the value of cells to another sheet in chronological order ,when the file gets opened in different dates, so that I can present data in dynamic pie chart.
View 1 Replies View RelatedI have a excel file with two worksheets. I need to find a specific row in column g, cut the entire row, and paste it into sheet2. I have started off by using this code, that I got off of some site. It works wonderfully in finding the specific cell, but just copys and moves the specific cell into sheet2. Whereas I need it to cut and paste the entire row where it finds the cell that begins with a 3 in column G.
Sub Copy_To_Another_Sheet_1()
Dim FirstAddress As String
Dim myArr As Variant
Dim Rng As Range
Dim Rcount As Long
Dim i As Long
I get one report.xls workbook by FTP. This book contain date and time in cell A14 in sheet1. e.g. 30-04-2006 19:38:00
I need to have macro to extract only time and paste it to cell A56 in same sheet. How can I do that. The date format is 30-04-2006 19:38:00 and it may be 05/05/2006 7:15 am. Or it could be any type of date format. Please send me how can I work with different date and time format to extract the only time and paste to other cell.
I need to build a macro which copies 3 rows every day and pastes the row data into an identical sheet. The three rows will have column "D" as =today(). As the days progress the three rows will change accordingly ( tag to the today's date)
e.g. 28/1/2014
28/1/2014
28/1/2014
I need the macro to recognize the date when pressed and copy the corresponding rows of data and paste them into an identical sheet with the same date. The second sheet is an archive sheet. The date will tick over as per the calendar.
I would Need a macro which would Search a Keyword in the excel sheet and copies and pates the data in Cell "A2". for Example "Market" and then after the search it copies 12 rows upwards and 10 columns from the Cell that the word "Market" is placed. And then it copies 12 rows downwards and 10 columns from the Cell that the word "Market" is placed.
I have tried recording the same but it does not work if the Word "Market" is placed in different cell value.
I am trying to write a simple macro to copy a drop down list I created in cell O2 and then paste in the same sheet. I need it to paste starting in cell A2 and then move to A4 and so on for every even row cell through A9778. I would also like it to keep a border around the cell. I can't find direction on how to tell it every even cell or defining x and then doing x + 1...
View 3 Replies View RelatedWhat I am trying to do here is to compare 2 lists in 2 different files, and when there is a match, then copy and paste the related cells of the matching name. Sorry if this sounds messy, perhaps the sample file I have attached can explain better.
Every month I get a new file in the format of “Data Source” sheet where the list of banks in column A and the figures in column M, AA and AB might change from month to month. For the sake of convenience, I put the source data as a different sheet instead of different file here.
I have an existing report template in the format of “Final report” sheet where basically I copy and paste the relevant cells according to the name of the banks.
I don’t think I can use Vlookup because the cells that I want to extract are not right beside the search criteria. If I’m wrong please correct me.
Anyway, assuming a macro is needed for this, I am wondering if I can create a macro, where it can search the list of banks in column A in “Data Source” sheet based on the list in column A in “Final Report” sheet, then copy the correct cells from column M, AA and AB and then paste them into the correct cells in columns B, E and H in “Final Report” worksheet?
Note that not all the banks in the “Final Report” sheet are in the “Data Source”, so for this example, row 4 for ABN Bank should remain blank after the search because it is not listed in the “Data Source”. The Data Source List might also change over time.
There is also this problem of the bank names from the “Data Source” sheet not being exactly the same as the existing list in “Final Report”. For example in this file, ANZ Bank in the other sheet have all the extra stuff behind, but we know it is the same bank.
I would like to implement specific cell ranges from two specific worksheets each within 33 workbooks (which all have several tabs) into a summary page in a separate workbook.
The cell ranges are going across my spreadsheet in rows and I would like for them to transpose into a columns depending on the data which I have separated by catergory on the summary page. They are all on the same location in each workbook which is separated by country. The cell ranges are E26:P37 and I would like to transpose them and have them put below eachother without overwriting for my format on the summary page, how I can put this together in a macro?
Attached is my code, pay attention to the bold part. I want the sourceSheet to be copied as a sheet and pasted in the targetSheet (the Sheet2 of "NewBook") but I want it pasted asvalues. Here is the specific part which needs to be looked at...and below is the full code.
VB:
Set sourceBook = Application.Workbooks.Open(sourceFilename)
Set sourceSheet = sourceBook.Sheets("Current")
Set targetSheet = NewBook.Sheets("Sheet2")
[Code].....
copy/paste Every Sheet Single ( P Column ) and Paste to Notepad and take P1 As file name for note pad.
View 1 Replies View RelatedCan I paste text inside a box on sheet 1 that automatically paste into a cell in sheet 2? I'm trying to make sheet one look more like a web page. I want to be able to create text boxes on sheet one that will automatically copy the text into a certain cell in sheet 2. Seems like I seen something a long time ago where you go to sheet2 and in the cell you want the text to show up, you type in something like =sheet1 box1 .
View 1 Replies View RelatedI have a template with a sheet dated the 1st of the month "Feb 1" Cell 2 also had the same date.
I'd like a VBA to copy this sheet, change the sheet names to Feb 2, Feb 3, etc, and also change cell 2 to the same name...
I've seen similar code to copy sheets and change name, but can't figure out with the date...
A pop up asking for the number of new sheets would also be useful.
ExcelForumSample.xls
How would I write an if statement that checks to see if the date entered is two weeks past?
View 9 Replies View Related