I'm trying to get a VBA code that will allow me to copy and paste rows based on a date range, for example
Column A = (Blanc)
Column B = Line Number
Column C = Date
[code]....
i need to have a pop up box that i can input the start date and then another pop up for the end date (mm/dd/yyyy), then using these dates copy the whole row which are within the date range to another sheet called Summary.
I need to build a macro which copies 3 rows every day and pastes the row data into an identical sheet. The three rows will have column "D" as =today(). As the days progress the three rows will change accordingly ( tag to the today's date)
e.g. 28/1/2014
28/1/2014
28/1/2014
I need the macro to recognize the date when pressed and copy the corresponding rows of data and paste them into an identical sheet with the same date. The second sheet is an archive sheet. The date will tick over as per the calendar.
In sheet Model RC BOM I am trying to copy all the rows under Level 1 (row 3), including level 1, until it reaches the next Level 1 (row 537) (not including row 537), and paste those cells in next tab (BIW) starting at row 2. The next operation is to copy all rows under Level 1 (row 537), including level 1, until it reaches the next Level (row 827), not including row 537, and paste those cells in the next tab (Chassis) starting at row 2.
The challenge is that I cannot use the row numbering in sheet Model RC BOM as a reference for coding because the content will change every week.
I am trying to find a way of copying values from cells that are linked to another workbook and paste them to another sheet in same workbook to the end of last row entry. This needs to be done via VBA from a button. There are 35 rows and 9 columns linked to another workbook and they don't always have values (depending on source workbook). To cycle thru each row and copy if they have values and paste them to end of last used row on another sheet.
View 6 Replies View RelatedCode:
With Worksheets("Utvalg1")
.RAnge(.Cells(2, "A"), .Cells(.Rows.Count, "A").End(xlUp)).Copy Sheets("Oppsumm").Cells(.Rows.Count, "C").End(xlUp).Offset(1)
.RAnge(.Cells(2, "B"), .Cells(.Rows.Count, "B").End(xlUp)).Copy Sheets("Oppsumm").Cells(.Rows.Count, "D").End(xlUp).Offset(1)
End With
I have this code, but it doesnt paste the data, its only left empty. I want it to paste in columns C and D from row 15 and down as far as there is data to paste, aprox 5-7 rows...
I have set up a calendar control on a userform and got it to pop up when selecting one of 3 cells on a worksheet. The various bits of code making this work are below.
This code is attached to the Userform.
VB:
Private Sub Calendar1_Click()
With ActiveCell
.Value = Calendar1.Value
[Code]....
What I am struggling with is that I'd like to have the calendar that pops up in cell C18 (which is Date of Birth) default to starting on 1st January 1987 not todays date. Also, if there is a value in either of the 3 cells that use the calendar, then I'd like the calendar to display that date. If the cell is empty then todays date is fine for cells G3 and G26.
I have one workbook that needs two macros.
On the "Complete Backlog" tab of my workbook, I want users to enter in the requested information based on the column header. Then I would like a Macro attached to a button that says "Refresh" that the user would click after they have entered in all of the information. This macro should look in Column M (WIP Status) and if any of the cells say "Close", it should Cut the entire row from the spreadsheet(Ex. A2:M2) and Paste it into the speadsheet titled "Closed Jobs".
This is so that as jobs are closed/finished, they are removed and stored on a separate sheet. The items would have to be pasted so that it pastes into the next available row - not just on top of each other.
I also need another macro that i can put into a button that doesn't "delete" a row from the sheet, but just copies over to another sheet - so that there are two instances in the workbook.
If would look something like: If a cell in "Column G / Director" of the "Complete Backlog" speadsheet is equal to "Snodgress" then copy columns A-L of the same row to the spreadsheet titled "Snodgress" - of course skipping down the rows to the next blank row.
.....is equal to "Herr" copy row to "Herr" spreadsheet.
....is equal to "McCormick" copy row to "McCormick" spreadsheet.
and so on.
I've been tackling this data capture/paste issue for a week or so. I found the string below which does provide a good foundation for my challenge. But, my basic level of understanding macros limits my modifications to meet my needs.
[URL] ......
I have 20 worksheets in my master file corresponding to Excel files individual associates will update weekly. After the associates have updated their individual files for the week, I want to capture the data entered and paste values into a master file containing a worksheet for each associate (sharing the same name as the individual associate file). All of these files are housed on team SharePoint sites.
I need a macro to perform several steps after clicking a "Run Update" macro button in the master file:
Open individual associate fileIn master file, search for each Initiative listed in column B (starting cell B3) in the individual associate file (in column B starting at cell B11)If Initiative is found in individual associate file, copy adjacent data in columns D:J for the respective rowIn master file, paste values to the corresponding Initiative row for the corresponding week's worth of dataIf Initiative is not found in the individual associate file, move to the next Initiative listed in the master fileRepeat these steps for each individual associate file
Linking would be the easiest way to accomplish this if I wanted to have a multitude of weekly individual files for the associates. However, I'd rather each associate have one file for them to update (basically overwriting their previous week's entries).
I need to ensure the paste values corresponds to the appropriate day of the week. In simpler terms, if the date in the individual associate file in cell D9 reads Oct 1, 2012, the data captured from that row needs to be pasted to the corresponding row/column in the master file that reads the same date.
I would like to copy and paste two columns from a worksheet to another worksheet simultaneously. I would like to have a macro to do this function.
View 5 Replies View RelatedI am new to macro and just trying to learn. I have a spreadsheet with 20000 rows and 8 columns. I am trying to identify equal rows based on the values of columns C, D, E and F. then I need to separate equal bunches with a blank row. Then I need to copy the ID number from the first cell of column B of each bunch and paste it for the rest of the rows in that bunch. I have written the following code but this does not put the ID of the first cell in a bunch for the rest of the rows in that bunch.
[Code] .........
I need to loop through worksheets in a workbook and copy every first cell value(A1) and then paste into a new worksheet.
I have tried various loops. some have copied first value for the first sheet and then pasted in the new sheet. while others have been not so good.
This is the code I have so far and this does not work at all.
Code:
Sub Check()
Dim ws As Worksheet
Dim lr As Long
Dim treg As Worksheet
[Code]......
col1 col2 col3
row1 A 1 a1
row2 data data data
row3 data data data
row4 data data data
row5 A 2 a1
row6 A 3 a1
row7 B 1 a1
I'm trying to do is set up a VBA code that will take lines lines 2-4, copy the rows and then paste them in new rows every other row for the rest of the document, so that it appears as...
col1 col2 col3
row1 A 1 a1
row2 data data data
row3 data data data
row4 data data data
row5 A 2 a1
row6 data data data
row7 data data data..............................
I currently have created a database (sheet two) with information including ID # (VH-XXXXX) in Column A and all the necessary information related to that unique Item. What I would like to do is search based on the ID number, have it filter, then copy and paste the row into another worksheet. Is this possible? I am relatively new to VBA and have written codes for copy and pasting rows, but never with an autofulter.
View 3 Replies View RelatedUntitled.jpg
Untitled2.jpg
I have to edit the following test to have the possibility to insert in the new row,new VALUES. These data are in a different sheet where I'm working but in the same file xls.
[Code] .....
I insert an example of output.
I need to copy and paste 4 rows individually under each of the 500 rows.
View 12 Replies View RelatedFirst and foremost I would like to congragulate you on this wondeful piece of code in the below link...
The query was to get a future date excluding Fridays and Holidays...
http://www.excelforum.com/excel-work...rkingdays.html
I have a similar query and therefore I pasted this link...
I actually wanted to get a future date using a Dynamic two day off as my the offs keep on changing as well as incorporate Holidays and Leaves if any..
Now Holidays would be official Public Holidays and
Leaves would be taken by the employee..
The code needs to pick the Leaves + Holidays and different offs maybe even more than 2 offs...
is it possible to copy from say (A1,A8,A9,A17) to (A1,A2,A3,A4) on another worksheet? Is their a formula for this?
View 3 Replies View RelatedI do have macro which populates sheets based on given list.
I want to paste all data in newly created sheets from "Template".
I do not want to loop 2 sheets ("DATA" & "Template").
Data must be pasted with format & validation. Validation exists on Template sheet only. No other sheet is referred for validation.
I am looking for VBA code that will select a data validation cell, copy the selection, and paste the value of that cell in a different worksheet.
The data validation list is in cell L47. The user will select a date from cell D31, type a description of activities in the adjacent column and then select initials from the aforementioned validation list in cell L47. I need the code to fit into a button I created so that when they click it to approve the activity, the code will copy the value of the initials and paste it into column AB in a separate worksheet. Column AB runs parallel to column A, which contains all of the dates located on Sheet1 in cell D31. I think I might need some sort of loop to run this so that it pastes initials on the correct date.
Is it possible to disable the copy/paste functions on a particular worksheet within a workbook, or failign that, on a complete workbook?
I want to run a macro that looks thru column F of all my worksheets (in my entire workbook).
If it finds an x then I want it to copy that entire row and paste it into a worksheet called "old" or a new worksheet or a new document in word (it doesn't matter - just whatever is easiest for my little brain to understand).
I should end up with about 40 rows of data in the new sheet.
(I have some code that looks thru it all and colors the cell blue but I just don't know how to get it to copy and paste the entire row into a new worksheet.)
I am facing problem in copying the contents from same range in different sheets ie suppose cell (C9) from 5 sheets(say) to a new sheet in cell(say) D9
Copy contents from each sheet with bullet..... or anything so that it will differentiate it from the contents of other sheet.
tried making changes in the following code so as to copy paste only those cells which has any value.but could not succeed
according to the following even if there is no value a cell from a particular sheet it still gives a bullet.
to clear it more.
if there are 3 sheets having information then only 3 bullets with information should appear.
Sub X()
Dim strTemp As String
Dim shtTemp As Worksheet
Dim rngX As Range
Dim lngIndex As Long
For lngIndex = 5 To 10
Set shtTemp = ActiveWorkbook.Worksheets("Day" & lngIndex)
For Each rngX In shtTemp.Range("A1").Cells
strTemp = strTemp & Chr(149) & Chr(32) & rngX.Value & vbLf
Next
Next
Range("Sheet1!E5") = Left(strTemp, Len(strTemp) - 1)
End Sub
I am unable to copy and paste on a particular worksheet. It is not protected nor are the cells locked. I can copy one or more cell's contents, but as soon as I click into the cell I wish to copy to, the paste icon greys out. Using VBA code to do the same fails at the same point.
View 4 Replies View RelatedFinding the value "OK" in a range of data in Worksheet(1) out of Range("Product"). Ones the value "OK" is found, the entire row is cut and then pasted into a new worksheet 'Range("A3")'. Then the loop sets in and finds the next value "OK" in the range untill it reaches the end of the predetermined Range("Product").
The only problem I have is that the code I have written already performs the process, but when pasting the data into the new worksheet, paste's all of the found rows into the same row. So what you are left with in the new pasting sheet (Worksheet2), is only the last found row because it keeps overiding previously found data. What I need the Macro to do is find the next availible blank row in Worksheet2 and for all values cut out of Worksheet1. Now there was a simular posting to this on the forum, but when I tried it in my code it would not work...
Sub FindAndPaste1()
With Worksheets(1).Range("Product")
Set c = .Find("OK", LookIn:=xlValues)
If Not c Is Nothing Then
firstAddress = c.Address
Do
c.EntireRow.Cut Destination:=Worksheets("Sheet2").Range("A3")
Set c = .FindNext(c)
Loop While Not c Is Nothing And c.Address <> firstAddress
End If
End With
End Sub
I also attach the Excel spreadsheet called Product Macro.xls
attached is the template that im working on right now. the worksheet which is named as "1" has a command button when clicked on it would create another worksheet named as "2", now i need to collate the information in to a master sheet which i have named as "daily report". All im in need is to copy data from every worksheet and post the same in the daily report using a Macro code.
iam able to do the same using the following for one row (1.1 to 1.5) of values which repeats only once for the first worksheet and doesnt repeat next time for worksheet 2 and so on. I want to have the values for 1 to 10 in the daily report. Can someone help me?[/color]
I would like to be able to select several non-sequential rows in a worksheet called "Data" (using a check box or just entering a value in Column A) and then be able to press a Command button to copy the selected rows to another worksheet called "Estimate" at the bottom of a table, and delete the designators in Column A (i.e. deletes the value, or unchecks the boxes) so I can repeat the process again if needed.
View 7 Replies View RelatedI am now trying to create a excel macro to auto populate all the dates with reference to a start date and end date. The catch is that only working days are required in the range. My reference cells (start and end date) are in Sheet 1 while the destination cell range are in Sheet 2. The reason for creating a macro instead of a function is that the intervals between the start date and end date changes frequently (annual, semi-annual and quarterly) Best case scenario would be a button which I can just press after i input the dates to generate the range of dates in another sheet.
View 1 Replies View RelatedI am a complete amature at Marco's and formulas. I have been trying to create what i need but i am unable to get it to work. I have a worksheet named "Course dates incl. pursuit" which has a table which runs from B7 to J144 in the table it has date, number, name, location, job, area, notifified, on system and passed?. in that order. I want if the passed column which is in J if that has a Y in it to copy and paste into another worksheet on the next avaliable line, worksheet name "Master."I would like it in a slightly different order if that is possible they have the same titles on the table but would like it to go number, name, location, job, area and date. Running from B5 to G(end of spreadsheet). That is the main part i would also like to to copy and paste into another worksheet if the answer is "N" but the above part is the most important part. Due to the computer settings i am unable to attach it
View 6 Replies View RelatedI want to copy 4 columns and one cell to different sheet. I have 'Main' sheet and 'Report' , 'Report(1), 'Report(2), 'Report(3)' and so on. In this 'Report', I'd like to copy column A,E,F, and J and paste to column B, C, D, and E in the 'Main' sheet. I also copy Cell C3 in 'Report' sheet and paste in column A. The cell C3 is ID.
[Code] .....
I need to check every 'Report' sheet for copying and put these records into 'Main' sheet.
The first row in 'Report' is 6
The first row in Main is 4
