I have 8 different files all have a set of data in them
each one has a long list of (column a-n) however the number of rows change by date. I need each file copied into the finalfile.xls one after another. in the files that will be merged into the final file the final row i need copied is blank. I have all the copy formulas and everything set, I just need a range to copy that automaticaly takes cell a10 to the first blank a cell from each file and pastes it in the finalfile.xls under the last paste so they dont over write each other.
I would like to record/create a macros to open the file and paste 4 columns worth of data into another spreadsheet. Making sure the data is pasted in the correct column and doesn't overight data already in a tracker. Ie. paste it into the next available space.
Sub moveit() Dim MyRows As Double Dim TotalRows As Double Dim Counter As Double Dim StartRange As Variant Dim Newrange As Variant
MyRows = InputBox("This macro will copy and paste the current data into mupltiple columns. Make sure that you have at least one cell in the targetted region of data selected. How many rows deep do you want the finished data to be?") - 1
I have a macro that would check data in Column A and validate if a particular number is repeating, then for that number go to column B, Take the Values from there go to a new sheet and paste the values in a row.
Tabs 1, 2 and 3 have a column of data (Column A) on each sheet. They all start from the same cell. Each cell of data are just numbers. The column (an array) of data will not have blanks between.
But, they are not the same number of data. They vary.
Meaning, Tab 1 may have 15 numbers (A1 to A15), Tab 2 may have 20 numbers (A1 to A20) and Tab 3 could have 5 numbers (A1 to A5). Each iteration of the workbook may have different number of data in the A column on these tabs.
Now on Tab 4, I want combine the data from all three tabs into one column (in column A).
So, Tab 4 has a column A with data from Tab 1 copy and pasted to (A1 to A15) as values, then (A16 to A35) have Tab 2 data copy pasted as values and (A36 to A40) have Tab 3 data copy pasted as values.
Basically, the macro on Tab 4 has to count the number of rows on each Tab that are populated with data values and figure out to copy all the data on Column A from each three tabs and paste the data value into the Tab 4 in one column of data (in values).
I have multiple .xls sheets in a folder. C:Documents and Settingsu369875DesktopProject stuffTestin Save_ASCompleted History. And need to copy the data in all of them and paste them into a new sheet (one main sheet) in this folder...........
i need a macro which copy and paste from multiple worksheets (except for 3 worksheets which is named after Jan, Feb and Mar) into one worksheets (named as OVERALL). The data to copy will cover from cell A1:D1 and below where there is data available.
I am trying create a macro that will create a new work sheet on an existing workbook. I have minimum experience writing a macro, but I do know how to effectively record one. The issue is, I need the macro to copy multiple columns down to the end of the data and pasting it into the new workbook at the end of the data already pasted-- rows of data are frequently added to the workbook.
I found this treat but it didn't help me as i hoped. Move Data From One Column To Multiple Columns. I try to convert multiple datablocks to a new worksheet and make the adress blocks ready for further sorting and removing actions. The Excel I use is Dutch and i hope that i make my question clear. What I want:
copy each adressblock to another worksheet, put the initals as well as the beginning in a seperate column and delete the unnecessary comma's. Each adressblock is identified by a number in colom A. When a new number is shown, excel has to start a new line to fill. finally,if possible i like to extract the adress line into seperate colums of "street+numer", zip and place. Some adresblock have more than onder adres, if possible i want excel to ad these information in the 'extra' colums.
I am working on a project to automate the import of data and fixing the formatting.
The data contains the date in column A and time in column B. The time is in increments of 15 min for each day. The rest of the data is in columns C:F. Some of the dates don't have all of the times within the day (so instead of 96 rows of data per day, there maybe 80 rows). I have a second sheet of just dates and times that has the correct amount of rows for each day. What I need to do is have the rows data that matches in both the date and time column from sheet 1 copied over to the corresponding date and time on sheet 2. Blank data rows on sheet 2 are fine. I have found some stuff on .Find, but the stuff I found was for specific searches.
Sheet 1 7/27/13 12:00 AM 1 2 3 4 7/27/13 12:15 AM 5 6 7 8 7/27/13 01:00 AM 9 10 11 12
Sheet 2 7/27/13 12:00 AM 1 2 3 4 7/27/13 12:15 AM 5 6 7 8 7/27/13 12:30 AM 7/27/13 12:45 AM 7/27/13 01:00 AM 9 10 11 12
I have a spreadsheet with a heap of raw data in it. I need to perform a search based on a customer name, then return certain columns from the raw data IF the customer name is matched in one column, AND a special flag name is matched in a second column. The customer name is always a single entry for the purpose of the query, however the special flag must be checked against a possible list of values in a table. I know this is hard to explain, and I can't add attachments to my posts, so I have created a sample document and placed in in dropbox:
This is my basic setup, each piece of equipment will have more than one routine to be performed:
Equipment Type Make Model Serial Location
To Be Performed Frequency Last Performed Performed By Next Due Date R1
I want to track changes on "Last Performed" and "Performed By" and, if changed, copy both values to a separate "log" sheet. In total, there could be up to 10 routines for each peice of equipment. That means I would need to track 20 columns for changes. I would like this check to be done on save because that ensures that the user is satisfied with their changes and keeps the log from being flooded. And lastly, it needs stored in the log sheet in a way that I can identify which piece of equipment it was for and which routine was done.
I would like to implement specific cell ranges from two specific worksheets each within 33 workbooks (which all have several tabs) into a summary page in a separate workbook.
The cell ranges are going across my spreadsheet in rows and I would like for them to transpose into a columns depending on the data which I have separated by catergory on the summary page. They are all on the same location in each workbook which is separated by country. The cell ranges are E26:P37 and I would like to transpose them and have them put below eachother without overwriting for my format on the summary page, how I can put this together in a macro?
I've got several worksheets that all have the exact same layout that a user will enter unique information in to each worksheet. Then I've got a final worksheet that I want to have a button that the user can click and when they do, it will look to each worksheet and do the exact same process for each worksheet as follows:
It first looks to see if the worksheet is visible. If it is, I want it to copy the range A5 to K5 down until it gets to the last non-blank cell in column C. The first non blank cell that will be referenced will be C7. Then I want it to paste this information into the range A5:K5 on the final sheet named Sheet8 with the same values and keep cell formatting such as width and height, font. If the worksheet is not visible, it skips the sheet.
I want it to do this for each visible worksheet, placing the next visible worksheet info under the previous visible worksheet info. My current code as shown doesn't do that. It requires that something be inSheet8 A6 before it will even paste, then it pastes the info from A5:K5 but it doesn't do just the values nor does it keep the formatting. What I mean about not doing just the values is some of the info that needs to be copied comes from a drop down they can choose from and it copies the actual drop down menu. Also, it seems to copy all of the ranges from each sheet and paste it into just A5:K5 on Sheet8 and overwrites each other instead of pasting Sheet2 just below the information from Sheet1. So the only information shown after the entire process is completed is the information from the last visible sheet.
If Worksheets("Sheet1").Visible = True Then Sheets("Sheet1").Range(Sheets("Sheet1").Range("A5:K5"), Sheets("Sheet1").Range("C7").End(xlDown)).Copy Sheets("Sheet8").Range("A5").End(xlDown) End If
I have one master sheet that I update daily from several other spreadsheets.Right now I'm having to manually place the columns side by side and copy the new data over. The column and row format are exactly the same for each of these spreadsheets. Each day we go out and collect data, just numbers. I then must copy the numbers to the master sheet. I cant just copy and paste the columns because in the rows that don't have data in them it will overwrite the previous days information with blanks. I've attached a sample with some dummy data in it. I only update data in columns G and H.
Is there a way to copy from one sheet to another but to different columns? For example, I want to copy the information from Sheet1 to Sheet2, starting at row 17 and leaving column C blank and pasting the information from Sheet1 column C to Sheet2 Column D?
I thought I could use something like this or with a combination using Unbound but couldn't get it to work.
I am having a problem with hidden columns when creating a new sheet via VBA.
The source sheet has (4) columns that are hidden when this data is pasted to the destination sheet it ignores the four columns.
I need the destination sheet to be identical to the source sheet with the hidden columns.
As you can see in the code I have been able to hide the columns however the data is now in the wrong columns because the copied data excluded these columns. I tried hiding the columns before and after the paste with no success I'm thinking the issue lies in the actual copy portion of this task.
Sub E_MAIL() ' ' E_MAIL Macro ' ' Multiple_emails_and_Sheets Macro 'This is used for one sheet with multiple e-mails. ' ThisWorkbook.Sheets("NO").Copy
I'm trying to copy and paste range in alternate columns from one worksheet to another. I can record this macro, but I believe it'll be really long because I have 21 alternate columns to copy and paste. What I'm trying to do:
-copy range B9:B41 in workbook 'Channel OU template' then paste values only in range BI9:BI41 in workbook 'final' -copy range D9:D41 to range BK9:BK41 -F9:F41 to BM9:BM41 ..and so on until the last column AP9:AP41 to CW9:CW41
Basically it's just simple copying and pasting from alternate columns. This is the really basic code that I have just for one column:
Sub copy() Windows("Channel OU template").Activate Sheets("sheet1").Select Range("b9:b41").copy Windows("final").Activate Sheets("ou").Select Range("bi9").PasteSpecial xlPasteValues End Sub
I am trying to save me a lot of copy and pasting. I have cells A1:A100+ with customer names listed out. I am trying to create a chart on a different page but on this particular chart, i need those customer names at the top of the columns going across the page instead of the rows.
I want to copy 4 columns and one cell to different sheet. I have 'Main' sheet and 'Report' , 'Report(1), 'Report(2), 'Report(3)' and so on. In this 'Report', I'd like to copy column A,E,F, and J and paste to column B, C, D, and E in the 'Main' sheet. I also copy Cell C3 in 'Report' sheet and paste in column A. The cell C3 is ID.
I need to check every 'Report' sheet for copying and put these records into 'Main' sheet.
The first row in 'Report' is 6 The first row in Main is 4