I have this VBA work fine for me but I want to chage this to when it copy then it select active sheet and active cell.
Sub test()
Dim wb As Workbook, wb2 As Workbook
Dim ws As Worksheet
[Code]....
I amended the range with the code from the J.Walkenbach's book. However, the closed file "budget.xls" will be populated weekly with same columns but different number of rows. For example, if file budget.xls has data populated over 18 columns and 50 rows, the code will populate row 31 to 50 in the active workbook with "zero" values. Need the code will copy all the values in the closed file in Sheet1 over?
Private Function GetValue(path, file, sheet, ref)
path = "d:files"
file = "budget.xls"
sheet = "Sheet1"
ref = "A1:R30"
Dim arg As String
If Right(path, 1) <> "" Then path = path & ""
If Dir(path & file) = "" Then
GetValue = "File Not Found"
Exit Function
End If.......................
look for a certain value in worksheet A and copy that row of data to Worksheet B.
However, it seems to be only copying the row in worksheet A and pasting it. Is there something that a noob VBA scripter has missed out?
PHP Private Sub GetInfo_Click()
Dim r As Long, LastRow As Long, Status As Integer
Dim Message As String, Title As String, Default As String, MyValue As String
Application.ScreenUpdating = False
MyValue = Range("A4").Value
Workbooks("invoice.xls").Worksheets("A").Activate
LastRow = Range("C65536").End(xlUp).Row
For r = LastRow To 1 Step -1
If Cells(r, 1).Value = MyValue Then
Rows(r).EntireRow.Copy
Workbooks("invoice.xls").Worksheets("B").Activate
Rows("8").Select
Selection.PasteSpecial Paste:=xlPasteValues, Operation:=xlNone, SkipBlanks _
:=False, Transpose:=False
Status = 1
Workbooks("invoice.xls").Worksheets("A").Activate
Rows(r).EntireRow.Delete
Exit For
End If
Next r
Application.ScreenUpdating = True
I would like to copy the data from one worksheet to the alternate row in another worksheet as follows. I've attached a file showing the source file and the desired output.
1. Copy column B's data in worksheet "Working" to worksheet "Upload file" Column V. B2's data goes to V1, B3's data goes to V3, B3's data goes to V5, so on and so forth.
2. Copy column H's data in worksheet "Working" to worksheet "Upload file" Column F. H2's data goes to F1, H3's data goes to F3, H3's data goes to F5, so on and so forth.
The number of rows with data in worksheet "Working" varies. It could be 30 lines one time and over 100 lines another time.
I have embedded a worksheet called Rawdata" into a userform. Is has a number of text boxes on the userform, all the text boxes copy correctly to a worksheet called Rawdata, however i cant get the spreadsheet data to copy from the Userform to the sheet called Datapad.
The worksheet in the userform is from A1:G600, this data needs to be copied back to the Datapad worksheet B2:F601.
code so far:
Private Sub cmdadd_Click()
Dim iRow As Long
Dim ws As Worksheet
[Code]....
As I am managing a few projects at once, I would like to create a To Dos List for each project (seperated by different worksheets). To make my life a bit easier, I hope to show all the To Dos which is due on a particular day on a separate worksheet. In other words, I am hoping to write a macro which allows me to copy all the relevant To Dos (of that day) from different worksheets and compiled it into a single list on a new worksheet.
Note:
1) Each row of To Do contains 3 columns, Date, Priority and Descriptions.
2) The To Dos for each project are NOT arrange in sequence by dates.
3) Number of project will increase over time, therefore the number of worksheets will also increase.
I have a workbook with loads of various worksheets,, which is shared between a group of us.
What i want is that each time the workbook is opened it always starts on the same worksheet called 'main'.
get a message box pop up upon opening of workbook no matter that tab its saved at.
View 3 Replies View Relatedhow does one run code, particularly to rearange some columns upon opening a worksheet?
If A > D Then
{A=D
B = E
C=F}
and
{D=A
E = B
F=C}
End If
Is it possible to have a text box and a macro button that when a user enters a name of a folder (or part of the name) on say the c: drive it takes you there? Example being i have a folder called Alcan Inc on my c: drive, so i type in the text box alcan and click the macro. it then opens a windows explorer screen with the folder open.
View 2 Replies View RelatedI'm having an issue with a worksheet that I created. Apparently, every time that I go to open it, it gives me a Grey blank screen. Yet, I know the worksheet is behind this Grey screen. I went to full screen and I can see the work sheet in full view, but it always opens in this Grey screen. I'm not sure why its doing this, no other worksheets open in this matter. I have tried reinstalling excel and it still didn't fix this problem. But it is only happening with one particular worksheet. I'm sure it is just a setting that I might have changed, but I can't figure it out. The file isn't corrupt because the macros still work, I tested them.
View 7 Replies View RelatedI'm having a problem to use the macro for opening a specific worksheet in a workbook. My plan to setup the workbook to open the first worksheet no matter which worksheet that was last saved and close.
What i have in mind is like below macros but it is not working.
Private Sub Workbook_Open()
Worksheets("Main").Activate
End Sub
Attached is the sample for the workbook. Test file.xlsm‎
Anyone who opens my sheet, has to feed his/her name which will be appeared in a particular cell.I am using the below code.
View 12 Replies View Relatedhow to update a function when opening worksheet. I made
View 4 Replies View RelatedI wish to send a message when a worksheet is manually opened, but not when it is activated from within VBA.
The following code does not work, and I am open to suggestions
Private Sub Worksheet_Open() ....
I have the following code, which I use to open up a .xls file generated from Crystal Reports:
Application.ScreenUpdating = False
Application.DisplayAlerts = False
Dim fexport1 As String ' variables for the exported file
Dim fexport2 As String
Dim wb1 As String 'variables to change between the opened workbooks
Dim wb2 As String
strTemp = "Please Choose The Exported File"
MsgBox strTemp
fexport1 = Application.GetOpenFilename("Excel Files (*.xls), *.xls)")
If InStr(fexport1, "False") = 0 Then
Workbooks.Open fexport1
wb1 = ActiveWorkbook.Name
Else
strTemp = "Operation Canceled"
End If
The problem is that Crystal Reports generates the file with an invalid worksheet name (it contains a backslash) and I do not have access to modify the Crystal Report. Althought the file can be automatically repaired by Excel when manually opened, the macro chokes and the "Application.DisplayAlerts = False" does not fix it. The only solution I can think of is renaming the worksheet without opening the file.
if you open a workbook & choose not to enable macros, is there any way to later change your mind & set macros to enabled without having to close & reopen the workbook?
View 9 Replies View RelatedI have an excel WS1 set up as DB; I want to keep this sheet for data revision. WS2,3, 4, & 5 will be data that is filtered and sorted, using WS1 as source so I want to auto copy the WS1 data. Can I just auto copy WS1 (how do I do that?) then filter and sort in each WS?
View 3 Replies View RelatedI have been working on a macro that compares a existing list of data to an updated list of data and then either moves any data not on the new list over to a completed tab (followed by deleting the record on the existing sheet), and then adds any items not on the existing sheet, but which appear on the new list, to the existing list.
I have come across a stumbling block, i have managed to identify on the existing list the rows of data that have been removed from the new list and therefore need to be moved over to the completed tab, but when i select the data it selects the header row aswell (which will always remain the same row). Obviously this then pastes the header row aswell, and also i can't seem to get it to paste in the new sheet to the next available row (i.e this will be used daily and i don't won't to overwrite the infor already in the completed tab). the next issue i have is then when i go back to existing sheet to delete the data i just copied across, as the header was initially select this also gets deleted.
The code below, is the complete code, including filtering, copying some forumals etc. The area i am getting stuck on is highlighted in red:
Sub Update()
Dim bottomrow As Long
Dim My_Range As Range
bottomrow = Cells(Rows.Count, "C").End(xlUp).Row
Set My_Range = Range("A1:Y" & bottomrow)
[Code] .....
I would like the workbook to open to a specific worksheet everytime it is opened regardless of what worksheet it was in when file was saved. Can someone point me in the right direction?
View 2 Replies View RelatedI have software that exports to an excel file. The files are one or two page reports. The way the software dumps the reports into excel, it comes out looking pretty rough. The rows and columns aren't spaced very well, the fonts look like garbage, and nobody likes them.
I would like to apply formatting changes to these reports automatically without the end user having to do anything. So as soon as the document is opened up it bolds the column headers, adjusts column widths etc. The reports are auto generated so no formatting can be done when the reports are made.
There may also be different formatting done to different reports. The files will come out named something like, "Report_A_DDMMYYY.xls, Report_B_DDMMYYY.xls," etc. Report A, and Report B will likely need different formatting.
I'm not opposed to using VBA or whatever might be necessary to make this happen. I can learn anything I need to pretty quickly, I just don't know where to start with this.
I have a workbook that contains worksheets whose sheetnames are specific to each day of the month ie: 1st 2nd 3rd 4th 5th, and so on up to 31st. I am trying to write an workbook open procedure to check the day of the month and match it to the relevant worksheet so it will open to that day. for example if opened today being the 25th, i want the code to unhide sheet named 25th and select it, whilst all other sheets bar one is hidden.
View 5 Replies View RelatedI have a workbook with 3 sheets
Sheet1 - TeamList - Column A is a list of all the team leaders which is used to create a new worksheet for every team. Col B is blank. Column C, D, E are the team lists where teams can consist of anywhere from 10-25 employees.
For example
Column A
Column B
Column C
Column D
Column E
Team Leaders
Team Leader
Employee
Pin
TL 1
TL 1
Emp 1
10001
[Code] ......
Sheet2 "RawHours" A raw data sheet that contains employee hours information
For Example
Employee #
PIN
NAME
Reg
OT
TRN
Stat
Sick
Vac
Berv
2000100
10001
Emp 1
24.00
0.00
[Code] .......
Sheet3 - Template
Basically what I want to be able to do is create a sheet for every team leader and copy and paste there team into the appropriate sheet.
I have the sheet create done by simply copying the template and renaming each sheet using the Team Leaders list from column A from the TeamList sheet. And then I copy the page setup information using the template as well but when it comes to pulling over the appropriate team members in to the appropriate sheet I can not seem to wrap my head around it.
Below is the current code I am using:
Code:
Option Explicit
Sub CreateSheet()
Dim LR, i As Long
Dim shCount As Integer
Dim Sh As Worksheet
Dim Cell As Range
Dim CpySht As PageSetup
[Code] ........
I am trying to have an operation run when opening the Workbook. The UserForm opens fine, but I get an error when the GoButton_Click sub runs. The error file is not very comprehensive.
The user is promoted to 'Delete' or 'Cancel' before the sheet is deleted. I do want to select 'Delete' for the user, but I'm not sure how to do this.
The error mentioned occurs after the user selects 'Delete'. The error is:
Run-time error '-2147417848 (80010108)':
Automation error
The object envoked has disconnected from its clients.
VB:
Option Explicit
Private Sub UserForm_Initialize()
Me.Choices.List = Array("Choice 1", "Choice 2")
End Sub
Private Sub GoButton_Click()
If Templates = "Choice 1" Then
[Code]....
I have a worksheet(named A) where in some cases an additional WS needs to be filled out with some of the same data. I have a button that opens this new Worksheet (named B) and in the fields that are the same I use the formula,=IF(ISBLANK(A!D10),"",A!D10), to copy the data from WS A to WS B.
The problem is that these worksheets are copies of originals so that the orignal never gets altered. So when you go to import the data the WS that is opened is A (2) and B (2) and as a result nothing imports because the formula is looking at WS A not A (2).
Is there a way to make this work so that worksheet A (2) will go to B (2), A (3) will go to B (3),...
I have a worksheet with column a-e. Column e has data that says it is either closed or open. I was wanting to run a macro that would move the entire row that has the work closed in column e# into another worksheet also named closed. Please see the below for example;
A B C D E
1 # # # # closed
2 # # # # open
So basically I would like to move the data from row 1 into a the worksheet name closed.
What i've got is a spreadsheet that has a number of two worksheets one called premiership and another called stats, what i do is get data from 2 different websites and put that on stats worksheet by importing it.
Now this where it gets complicated, in stats when the data is download i wont to copy three cells to a specific location in the premiership worksheet. So in the stats worksheet, whats in column A and E needs to match whats in B and C in premiership and then copy information from cells in B,C,D in stats to cells in premiership G, H, I. AT this moment in time i do it manually, can this be done?
What I'm trying to do is to copy my data to another work sheet but with the different format like column to row..
item CODE
item DESCRIPTION
Cost
store 1
store2
store3
store4
store5
store6
store7
store8
[Code] .....
It includes formatting of column into row (store name,qty)
Store Name
Item Code
Item Description
Quantity
Price
Total Amount
Automatic it has total amount
store1
0003
item1
3
46.80
140.4
It will skip the column that has no value(empty cell) and will not transfer it into row
store5
0003
item1
2
46.80
93.6
[Code] .....
in my workbook i have 13 sheets, in one of the rows at the top of each sheet is a spot to put a name.
i would like to only have to put in the row on the first sheet and have it add the input to all sheets in the same row. how do i do that?
This is what I have now. YTD_annual_interest earned_3.xlsm
When you click the "update Workbook" button, it creates new tabs using the names in Column A5 through A29. If you look at the tabs named John Jones and Phil Williams, you see what I want to happen once the tabs are named. If you look at Mary Smythe, and the rest of the sheets, this is what actually happens.
My question is two fold.
1. Can the sane button be used to grab and copy the data in the corresponding rows as the named tabs? If no, how can that be done?
2. I want to populate the new sheets with the data as in the John Jones, and Phil Williams sheets automatically.