Copy Worksheet Data In Userform To Worksheet?
Oct 24, 2011
I have embedded a worksheet called Rawdata" into a userform. Is has a number of text boxes on the userform, all the text boxes copy correctly to a worksheet called Rawdata, however i cant get the spreadsheet data to copy from the Userform to the sheet called Datapad.
The worksheet in the userform is from A1:G600, this data needs to be copied back to the Datapad worksheet B2:F601.
code so far:
Private Sub cmdadd_Click()
Dim iRow As Long
Dim ws As Worksheet
[Code]....
View 2 Replies
ADVERTISEMENT
Dec 23, 2013
I have a workbook with 4 worksheet that store different type of data. It also has a userform that load at start of the application which is to search the data in the workbook. The userform has a combobox where the names of the sheets are stored. when the user selects say Sheet2 in the combobox, it enables the relevant textboxes on the userform and activates the worksheet at the change event. The userform has a search button that searches all the worksheets based on the text entered in a textbox.
The problem: how to search based on 1 textbox. What I want is: say for e.g the end-user selects sheet2 from the combobox, this intern enables 4 textboxes (Name, DOB, Nationality, ID #) on the userform. The end-user should have the liberty to enter data in 1 and/or any of the textboxes. The search should be performed, that if data is only in 1 of any of textboxes then give all rows that fit that criteria and display in a temp worksheet. if say the name and dob is filled by the user than what matches both should be displayed in a temp worksheet. if say dob, name and ID# given so the search button should narrow down to fit all 3 criteria and then display result in temp worksheet. As if mentioned data can be entered in either just 1 or any or all textboxes.
E.g. the worksheet is (Columns are Name, Nationality, DOB, ID#)
row 1 = name: Steven Martin, DOB: 27-may-1993, Nationality: Trinidad & Tobago, ID #: 1234567
row 2 = name: Gary Richards, DOB: 2-FEB-1993, Nationality: British, ID #: 456789
row 3 = name: David Cohen, DOB: 27-May 1993, Nationality: American, ID #: 98765
row 4 = name: Roberto McDonalds, DOB 21-Jul-1962, Nationality: British, ID # 654321
row 5= name: Gary Richards, DOB: 01-Dec-1978, Nationality: Australian, ID # 1234567
Now if the user enters only name as "Gary Richards" and search then row 2 and 5 should be displayed in a temp worksheet. if user enters name Roberto McDonald and ID# 1234567 then it should not display anything. if user enters DOB 27-may-1993 and nationality British and ID # 1234567 then as well shouldn't display anything and should a msgbox "no data found".
View 4 Replies
View Related
Apr 13, 2009
look for a certain value in worksheet A and copy that row of data to Worksheet B.
However, it seems to be only copying the row in worksheet A and pasting it. Is there something that a noob VBA scripter has missed out?
PHP Private Sub GetInfo_Click()
Dim r As Long, LastRow As Long, Status As Integer
Dim Message As String, Title As String, Default As String, MyValue As String
Application.ScreenUpdating = False
MyValue = Range("A4").Value
Workbooks("invoice.xls").Worksheets("A").Activate
LastRow = Range("C65536").End(xlUp).Row
For r = LastRow To 1 Step -1
If Cells(r, 1).Value = MyValue Then
Rows(r).EntireRow.Copy
Workbooks("invoice.xls").Worksheets("B").Activate
Rows("8").Select
Selection.PasteSpecial Paste:=xlPasteValues, Operation:=xlNone, SkipBlanks _
:=False, Transpose:=False
Status = 1
Workbooks("invoice.xls").Worksheets("A").Activate
Rows(r).EntireRow.Delete
Exit For
End If
Next r
Application.ScreenUpdating = True
View 2 Replies
View Related
Jun 19, 2013
I would like to copy the data from one worksheet to the alternate row in another worksheet as follows. I've attached a file showing the source file and the desired output.
1. Copy column B's data in worksheet "Working" to worksheet "Upload file" Column V. B2's data goes to V1, B3's data goes to V3, B3's data goes to V5, so on and so forth.
2. Copy column H's data in worksheet "Working" to worksheet "Upload file" Column F. H2's data goes to F1, H3's data goes to F3, H3's data goes to F5, so on and so forth.
The number of rows with data in worksheet "Working" varies. It could be 30 lines one time and over 100 lines another time.
View 2 Replies
View Related
May 14, 2014
I want activation of userform to hide worksheet, but as soon as the Userform is closed, the worksheet should show.
I have attached file to aid.
View 1 Replies
View Related
Apr 21, 2012
I have a workbook that contains 50 worksheets named 1-50. I need to add more worksheets. all the formulas in the worksheets always refers to the previous worksheet.
How can i make a copy of the worksheet named 50, name it 51 and have all the formulas in worksheet 51 refer back to worksheet 50?
View 1 Replies
View Related
Jan 16, 2008
As I am managing a few projects at once, I would like to create a To Dos List for each project (seperated by different worksheets). To make my life a bit easier, I hope to show all the To Dos which is due on a particular day on a separate worksheet. In other words, I am hoping to write a macro which allows me to copy all the relevant To Dos (of that day) from different worksheets and compiled it into a single list on a new worksheet.
Note:
1) Each row of To Do contains 3 columns, Date, Priority and Descriptions.
2) The To Dos for each project are NOT arrange in sequence by dates.
3) Number of project will increase over time, therefore the number of worksheets will also increase.
View 3 Replies
View Related
May 4, 2009
I have a workbook with 3 worksheets, 2 containing data and 1 used as a search and display sheet. I enter information into a cell, press enter and the relevant data is displayed in various cells.
I would like to create a userform to do the job of the search/display sheet, this is mainly to make it look more professional!
What do I need to add to the userform? Textboxes, Labels, Command Buttons etc, etc.
How would I go about transferring/copying the following data into a userform? ....
View 9 Replies
View Related
Feb 20, 2014
When I enter values in the userform textbox and press update button i need to copy whole row of data which is next to the textbox from userform to database sheet. (Copy only if data entered in the textbox).
Basically if textbox has a value in userform row 1 and it has a value copy it to database sheet if not skip and if value is in other texbox copy other rows.
The worksheet sample attached : example.xlsm
[URL] .....
View 9 Replies
View Related
Jul 16, 2014
How to copy a label caption (from userform) then paste it in a worksheet.
View 2 Replies
View Related
Jul 15, 2012
I have a Userform which has 3 'CONFIRM' buttons to pass the data from userform textbox 'ActDate1' (and 2 &3) to the worksheet 'Mod Schedule'.
In Column B from Row 7 onwards is a list of Names - one of these names will have been in the userform combobox 'SlctStu'.
I need vba such that when I click CONFIRM, on ActDate1, this value passes to:
The cell which is offset from the cell which has the matching name from combobox 'SlctStu' in the userform by the following formula:
((ModSend - 1) * 3) + 1
where ModSend is a variable set by my userform Me.Modsend.Value (a combobox).
So, for example, if the ModSend value is 3 and the name "Chuck Norris" is in the combobox 'SlctStu' in my UserForm, when I hit CONFIRM for ActDate1, I want ActDate 1 to go to the same row on sheet 'Mod Schedule' in column B from row 7 onwards where this name "Chuck Norris" also appears (a dynamic named range called 'StuModList' contains all the names that can appear here) and then offset across the worksheet by ((3 - 1) * 3) + 1 = 7 cells
View 2 Replies
View Related
Nov 4, 2009
I am trying to create a User Form to make data input easer for the users.
At this point, I am having trouble figuring out how to “place the data”.
My workbook has categories in which data is organized. For instance A10 might say “Toyota” and B11 would be Corolla than all of row 11 will have data supporting the Corolla.
Same for the “Dodge” category, only it starts at A60 and B61 would be something like Challenger, etc.
I have a code to place the data in the first empty row but this doesn’t work very well for me.
{ iRow = ws. Cells(Rows.Count, 1).End(xlUp).Offset(1, 0).Row}
I will have a drop down list of all the categories in the User Form which the user will select. From this is there a way to search for that category and then find the first empty row or insert a row within that category and then the rest of the data can follow?
View 9 Replies
View Related
Jan 17, 2008
In the code below, all I'm trying to do is get the next record from the userform to go to the next row in the worksheet and so on. I looked through some of the threads and even tried (as underlined) but I just can't seem to get it to work.
Private Sub TEST_Click()
Dim lRow As Long
Dim ws As Worksheet
Set ws = Worksheets("Sheet1")
'Prompt user before adding record
MsgBox "Are you sure you want to Add record?", vbOKOnly, Verify
'Add data to worksheet
ActiveCell. Offset(0, 0) = txtFruit.Value
ActiveCell.Offset(0, 1) = txtFruit_Number.Value
ActiveCell.Offset(0, 2) = txtFruit_Color.Value
'Clear userform
txtFruit.Value = vbNullString
txtFruit_Number.Value = vbNullString
txtFruit_Color.Value = vbNullString
txtFruit.SetFocus
' Find emtpy row
lRow = ws.Cells(Rows.Count, 2) _
.End(xlUp).Offset(1, 0).Row
End Sub
View 3 Replies
View Related
Oct 29, 2011
I have a userform that has 1 combobox and 2 text boxes. i need the two text boxes to go to specific row and a specific column based on the entry placed in the combobox.
I can move data from a userform to a database if i am adding it to the next row, but here, there already is data and i want to add to existing data.
I tried application.match, to find the text in the combobox, but i can't seem to figure out the syntax to add it to column 13 on the same row.
View 5 Replies
View Related
Aug 30, 2012
I have a macro that is starting to get pretty intensive and beyond my knowledge base. Currently is takes the needed data from sheet(1) and copies it to a newly created "Sheet2" in a specific format. Once the macro is done formatting "Sheet2", it shows both userforms for the next part of this macro.
One userform (UserForm1) is for inputting barcode data into rows on "Sheet2" (this is where I am running into problems). I cannot get the userform to capture the captions to the needed cells in "Sheet2".
The other userform (UserForm2) is for a visual representation of the error check. This will check for differences in Sheet2's column data. If a row's data in Sheet2 doesn't duplicate as expected it will flag RED and an image to show in the associated frame in UseForm2.
UserForm1:
Plate ID (PlateIDLabel goes to "PCR Plate ID" header column in Sheet2)
Plate Location (PlateLocationLabel goes to "PCRLocation" header column in Sheet2)
Currently the userform is coded to recognize prefixes for correct input into label textboxes.
Attached it the workbook with macro/userforms.
VB:
Option Explicit
Private Sub CommandButton1_Click()
Sheets.Add.Name = "Sheet2"
ActiveSheet.Move _
[Code]....
View 6 Replies
View Related
Jul 1, 2009
Depending on the attached workbook,
How can I edit the employee's Name and badge number thru a userform?
What should we depend on to save the employee's name before changing it, in order to use it as a find key?
View 14 Replies
View Related
Sep 10, 2009
I have setup a userform to record fuel issued to vehicles. I have a text box which I would like to use to display the last meter reading from my fuel pump. This data is stored in the last cell in column F of "Sheet1" workbook. Is it possible to read this data into my userform so when it starts it displays the last pump reading?
View 2 Replies
View Related
Dec 29, 2013
I have two userforms (for simplicity we'll call them UserForm1 and UserForm2). When pulling up data on UserForm1 and selecting CommandButton1 is Unloads the current form and passes the ComboBox1 on the form to a public variable called lSection_Choice. When CommandButton1 on UserForm2 is selected, it uses the public variable lSection_Choice to determine the ListObject on a worksheet and then locate the last row in the first column of the listobject and input the value of the TextBox1 on UserForm2. It runs through without any errors but the worksheets do not update? I am guessing it's because the modal UserForm2 is set and not focused on the worksheet.
Here is the code to pass the public variable
Code:
Private Sub AddTeam_Click()
lSection_Choice = Me.ComboBox1.Value
Unload Me
[Code]....
View 7 Replies
View Related
Dec 1, 2009
I have two userforms. The 1st is called “add a facility” and the second is called “Edit Facility”.
The first userform works pretty well. It places all the data in the right columns in the first empty row at the end of the table. Then the “sort” procedure places the “new” facility data in the right category. Everything is good there. Here's the code.
Private Sub CmndInput_Click()
Dim iRow As Long
Dim ws As Worksheet
Set ws = Worksheets("Facilities")
' find first empty row in database
iRow = ws. Cells(Rows.Count, 2).End(xlUp).Offset(1, 0).Row
'check for a Facility
If Trim(Me.TextFacility.Value) = "" Then
Me.TextFacility.SetFocus
MsgBox "Please enter a Facility"
Exit Sub
End If
'copy the data to the database
ws.Cells(iRow, 1).Value = Me.ListBox1.Value
ws.Cells(iRow, 5).Value = Me.TextFacility.Value
ws.Cells(iRow, 4).Value = Me.ListBox2.Value
ws.Cells(iRow, 6).Value = Me.TextType.Value
ws.Cells(iRow, 7).Value = Me.ListBox3.Value
ws.Cells(iRow, 12).Value = Me.TextConstneed.Value
ws.Cells(iRow, 16).Value = Me.TextPREAPP.Value
ws.Cells(iRow, 17).Value = Me.TextPreapsub.Value
ws.Cells(iRow, 3).Value = Me.TextDescription.Value
ws.Cells(iRow, 8).Value = Me.ListBox4.Value
ws.Cells(iRow, 9).Value = Me.ListBox5.Value
ws.Cells(iRow, 2).Value = Me.txtRefnum.Value
ws.Cells(iRow, 21).Value = Me.txtappdate.Value
ws.Cells(iRow, 24).Value = Me.ListBox6.Value
ws.Cells(iRow, 20).Value = Me.txtsubdate.Value
ws.Cells(iRow, 10).Value = Me.ListBox7.Value
' SORT Macro...
View 8 Replies
View Related
Sep 14, 2006
I have sheet (say Sheet3) that is in essence a Database. I need to create a Userform to insert a row above the highlighted cell and insert the data on the Userform in that row.
Userform would have 3 textboxes to enter data, a submit button and a cancel button. (the 3 boxes titled Part, Price,Vendor)
In the Worksheet the 3 Columns are
A C E
Part Price Vendor
View 6 Replies
View Related
Nov 23, 2007
I m trying to sort this out myself before posting but its driving me crazy! I have the following userform :-
I would like all that data entered into a worksheet called "Purchase Record" into the following cells:-
View 4 Replies
View Related
Nov 22, 2006
I have written code that allows a user to copy, via a button, a certain sheet any number of times. They can choose to copy that sheet 5 times and then 10 times, etc.
When the sheet tries to be copied for the 17th time, it fails with the following message: "Run-time error '1004':
Method 'Copy' of object '_Worksheet' failed"
Here is the code that I have. The second line is the line that is failing.
Worksheets("RoedForm").Select
Worksheets("RoedForm").Copy After:=Worksheets(iCount)
This always fails on the 17th copy regardless of how many different combinations of copy sheets the user tries. There are several sheets before the sheet that is to be copied and I have deleted several of those to see what happens and it still fails on the 17th copy. I also have 1GB of memory, so I don't believe that memory is an issue.
View 3 Replies
View Related
Jan 30, 2014
I have a UserForm with two ComboBox's (name ComboBox1 and ComboBox2) and a ListBox (name ListBox1).
In UserFrom "ComboBox1" shows two options of months "January" and "February".
And ComboBox2 shows options "Advertising", "Bills", "Daily Expenses"
I have some Data on my Excel Sheet. I want to pull that Data and show it in UserForm according to their Month in which they are incurred. For Example If from Userform "January" month is selected and "Advertising" is selected then it should show data in the ListBox1 as follow.
1-Jan-14JanuaryAdvertising TV 100
5-Jan-14JanuaryAdvertising Newspaper 30
5-Feb-14JanuaryAdvertising Internet 30
I have attached UserForm and Excel Sheet.
View 8 Replies
View Related
Jan 26, 2012
Code:
Dim c_data As Worksheet
Dim usrfrm1 As UserForm
Set c_data = Workbooks(txtdbname2).Worksheets("CONTROL_1")
[Code]....
I have a userform in a workbook (part2.xls). Data from a second open workbook (defined as c_data) is tallied (countifs) and then dropped in the respective textboxes on the userform (cnthpdia, cnthfld, cnhpcrt). These textboxes have their visibility properties set to FALSE.
I need to turn them on to have the data displayed.
I am receiving a "Variable not defined." error in the line highlighted above.
View 3 Replies
View Related
May 28, 2009
I have a spreadsheet that summarizes variations on a project. On the "Variations" tab a userform pops up that asks the user to select from 3 options:
1. Create new variation
This launches another userform that allows the user to enter the necessary information and create a variation sheet. This userform updates "VarSummary" and also creates a new sheet for each variation created. I have been able to do all of this so far. The summary sheet "Variations" tab uses the data on the "VarSummary" tab. This is the code I used to add variation
Private Sub cmdadd_Click()
Dim iRow As Long
Dim ws As Worksheet
Set ws = Worksheets("VarSummary")
With ws
iRow = . Cells(.Rows.Count, 2).End(xlUp).Offset(1, 0).Row
'Copy the data to the database
.Cells(iRow, 1).Value = Me.txtVarRecNo.Value
.Cells(iRow, 2).Value = Me.txtDate.Value
.Cells(iRow, 3).Value = Me.txtChg.Value
.Cells(iRow, 4).Value = Me.txtSrcRef.Value
.Cells(iRow, 5).Value = Me.cbstatus.Value
.Cells(iRow, 6).Value = Me.DirQty.Value
.Cells(iRow, 7).Value = Me.DirVal.Value............................
View 8 Replies
View Related
Sep 27, 2006
I have a userform that stores data (1 row record with 20 columns) to a worksheet.Is there a way to grab the data back in (other or the same)userform, ambent(correct) data and store them back in the same row in the worksheet?
View 2 Replies
View Related
Sep 1, 2007
I have a database in Sheet1, and need to make a drop-down list for each column title, so that it would filter out the necessary letters or words. E.g. I type "au" and see the words starting "au" in one single list (like aura, aubergine, etc..)
View 5 Replies
View Related
Sep 24, 2012
I've been tackling this data capture/paste issue for a week or so. I found the string below which does provide a good foundation for my challenge. But, my basic level of understanding macros limits my modifications to meet my needs.
[URL] ......
I have 20 worksheets in my master file corresponding to Excel files individual associates will update weekly. After the associates have updated their individual files for the week, I want to capture the data entered and paste values into a master file containing a worksheet for each associate (sharing the same name as the individual associate file). All of these files are housed on team SharePoint sites.
I need a macro to perform several steps after clicking a "Run Update" macro button in the master file:
Open individual associate fileIn master file, search for each Initiative listed in column B (starting cell B3) in the individual associate file (in column B starting at cell B11)If Initiative is found in individual associate file, copy adjacent data in columns D:J for the respective rowIn master file, paste values to the corresponding Initiative row for the corresponding week's worth of dataIf Initiative is not found in the individual associate file, move to the next Initiative listed in the master fileRepeat these steps for each individual associate file
Linking would be the easiest way to accomplish this if I wanted to have a multitude of weekly individual files for the associates. However, I'd rather each associate have one file for them to update (basically overwriting their previous week's entries).
I need to ensure the paste values corresponds to the appropriate day of the week. In simpler terms, if the date in the individual associate file in cell D9 reads Oct 1, 2012, the data captured from that row needs to be pasted to the corresponding row/column in the master file that reads the same date.
View 2 Replies
View Related
Dec 15, 2009
I'm a novice Excel 2007 user and appreciate all the help I can get. I have a workbook with monthly worksheets in it. When a certain data Type is selected from a drop down menu in that monthly worksheet than I would like to have it automatically enter specific data (Name, Date, Eval, Type) copied to another worksheet (CC) in the same workbook. I have been manually entering the data so far. Another thing, some of the data will be entered into the Monthly worksheets and some will only be manually entered into the CC worksheet so it would need to accomodate both methods of data entry. Please let me know if I need to clarify. I have attached the workbood, too.
View 11 Replies
View Related
Apr 14, 2013
I'm trying to set up a relatively simple UserForm, which will collect the name of a project from a ListBox, a project update which will simply be text entered into a TextBox, and a estimated completion percentage (factor of 10, 10/20/30% and so on) which will come from another ListBox.
I've managed to get many of the basics working, for example an OK button and a CANCEL button, but there are a few bits that I'm still finding rather tricky.
I have the selected date in the percentage listbox going back into my chosen place in the spreadsheet quite happily, but I can't get it to work for the project name listbox (I think it's because the options come from rowsource and weren't entered manually like the other one). I'll paste my code at the end so you can all see how I've done it (and have a laugh)!
I have also just about managed to get the data to go to the right place in the spreadsheet. I want the data to appear in columns, column 1 for the project name, project update in 2 and percentage complete in 3. I have this working, but it for any reason one cell becomes blank, my code uses that cell, and that could cause entries to become mixed up. I want the UserForm to enter data on the first entirely empty row.
Here's my code:
VB:
Private Sub Cancel_Click()
Unload ProjectUpdate
End Sub
Private Sub Clear_Click()
Call UserForm_Initialize
End Sub
[Code] .....
View 7 Replies
View Related
