Sort When Opening A Worksheet

May 10, 2007

how does one run code, particularly to rearange some columns upon opening a worksheet?

If A > D Then

{A=D
B = E
C=F}

and

{D=A
E = B
F=C}

End If

View 9 Replies


ADVERTISEMENT

Automatically Sort A Workbook On Opening And Delete Blank Rows?

Jul 4, 2013

I am trying to educate myself in the wonders of Excel (2003) and an struggling somewhat.I have a small project loosely based on a shops stock control and have attached a copy of the workbook -

The user normally only has access to columns B, C and E due to the others being locked and the sheet protected.I would like the sheet to be automatically sorted based on column E each time the workbook is opened.I then need to automatically delete a row once an item in column B has been removed (made blank)

View 3 Replies View Related

Always Opening On The Same Worksheet

Jul 8, 2006

I have a workbook with loads of various worksheets,, which is shared between a group of us.

What i want is that each time the workbook is opened it always starts on the same worksheet called 'main'.

View 5 Replies View Related

Message Box Upon Opening Worksheet

Nov 17, 2009

get a message box pop up upon opening of workbook no matter that tab its saved at.

View 3 Replies View Related

Opening A Folder From Worksheet

Jul 13, 2006

Is it possible to have a text box and a macro button that when a user enters a name of a folder (or part of the name) on say the c: drive it takes you there? Example being i have a folder called Alcan Inc on my c: drive, so i type in the text box alcan and click the macro. it then opens a windows explorer screen with the folder open.

View 2 Replies View Related

Opening Worksheet-nothing Shows

Mar 4, 2007

I'm having an issue with a worksheet that I created. Apparently, every time that I go to open it, it gives me a Grey blank screen. Yet, I know the worksheet is behind this Grey screen. I went to full screen and I can see the work sheet in full view, but it always opens in this Grey screen. I'm not sure why its doing this, no other worksheets open in this matter. I have tried reinstalling excel and it still didn't fix this problem. But it is only happening with one particular worksheet. I'm sure it is just a setting that I might have changed, but I can't figure it out. The file isn't corrupt because the macros still work, I tested them.

View 7 Replies View Related

Opening Specific Worksheet Using Macro

Mar 6, 2014

I'm having a problem to use the macro for opening a specific worksheet in a workbook. My plan to setup the workbook to open the first worksheet no matter which worksheet that was last saved and close.

What i have in mind is like below macros but it is not working.

Private Sub Workbook_Open()
Worksheets("Main").Activate
End Sub

Attached is the sample for the workbook. Test file.xlsm‎

View 3 Replies View Related

Customization Of Cell Value By Worksheet Opening

Jul 22, 2008

Anyone who opens my sheet, has to feed his/her name which will be appeared in a particular cell.I am using the below code.

View 12 Replies View Related

Update A Function When Opening Worksheet

Jul 20, 2009

how to update a function when opening worksheet. I made

View 4 Replies View Related

Copy Data From Another Worksheet Without Opening?

Jun 26, 2013

I have this VBA work fine for me but I want to chage this to when it copy then it select active sheet and active cell.

Sub test()
Dim wb As Workbook, wb2 As Workbook
Dim ws As Worksheet

[Code]....

View 3 Replies View Related

Send Message On Worksheet Opening

Dec 12, 2007

I wish to send a message when a worksheet is manually opened, but not when it is activated from within VBA.

The following code does not work, and I am open to suggestions

Private Sub Worksheet_Open() ....

View 9 Replies View Related

Rename Worksheet With Opening The File

Dec 12, 2008

I have the following code, which I use to open up a .xls file generated from Crystal Reports:

Application.ScreenUpdating = False
Application.DisplayAlerts = False

Dim fexport1 As String ' variables for the exported file
Dim fexport2 As String
Dim wb1 As String 'variables to change between the opened workbooks
Dim wb2 As String
strTemp = "Please Choose The Exported File"
MsgBox strTemp
fexport1 = Application.GetOpenFilename("Excel Files (*.xls), *.xls)")
If InStr(fexport1, "False") = 0 Then
Workbooks.Open fexport1
wb1 = ActiveWorkbook.Name

Else
strTemp = "Operation Canceled"
End If

The problem is that Crystal Reports generates the file with an invalid worksheet name (it contains a backslash) and I do not have access to modify the Crystal Report. Althought the file can be automatically repaired by Excel when manually opened, the macro chokes and the "Application.DisplayAlerts = False" does not fix it. The only solution I can think of is renaming the worksheet without opening the file.

View 9 Replies View Related

Enabling Macros Without Re-opening Worksheet

Aug 25, 2006

if you open a workbook & choose not to enable macros, is there any way to later change your mind & set macros to enabled without having to close & reopen the workbook?

View 9 Replies View Related

Default To Specific Worksheet Upon Opening Workbook?

Nov 22, 2008

I would like the workbook to open to a specific worksheet everytime it is opened regardless of what worksheet it was in when file was saved. Can someone point me in the right direction?

View 2 Replies View Related

How To Apply Formatting / Macro To A Worksheet Before Opening

Mar 11, 2014

I have software that exports to an excel file. The files are one or two page reports. The way the software dumps the reports into excel, it comes out looking pretty rough. The rows and columns aren't spaced very well, the fonts look like garbage, and nobody likes them.

I would like to apply formatting changes to these reports automatically without the end user having to do anything. So as soon as the document is opened up it bolds the column headers, adjusts column widths etc. The reports are auto generated so no formatting can be done when the reports are made.

There may also be different formatting done to different reports. The files will come out named something like, "Report_A_DDMMYYY.xls, Report_B_DDMMYYY.xls," etc. Report A, and Report B will likely need different formatting.

I'm not opposed to using VBA or whatever might be necessary to make this happen. I can learn anything I need to pretty quickly, I just don't know where to start with this.

View 4 Replies View Related

Opening Worksheet Based On Specific Date

Jan 25, 2007

I have a workbook that contains worksheets whose sheetnames are specific to each day of the month ie: 1st 2nd 3rd 4th 5th, and so on up to 31st. I am trying to write an workbook open procedure to check the day of the month and match it to the relevant worksheet so it will open to that day. for example if opened today being the 25th, i want the code to unhide sheet named 25th and select it, whilst all other sheets bar one is hidden.

View 5 Replies View Related

Prompting User To Delete Worksheet When Opening Workbook

Jul 13, 2012

I am trying to have an operation run when opening the Workbook. The UserForm opens fine, but I get an error when the GoButton_Click sub runs. The error file is not very comprehensive.

The user is promoted to 'Delete' or 'Cancel' before the sheet is deleted. I do want to select 'Delete' for the user, but I'm not sure how to do this.

The error mentioned occurs after the user selects 'Delete'. The error is:

Run-time error '-2147417848 (80010108)':
Automation error

The object envoked has disconnected from its clients.

VB:

Option Explicit
Private Sub UserForm_Initialize()
Me.Choices.List = Array("Choice 1", "Choice 2")
End Sub
Private Sub GoButton_Click()
If Templates = "Choice 1" Then

[Code]....

View 5 Replies View Related

Excel 2007 :: ActiveX Controls Command Button Opening Worksheet In Same Workbook

Feb 6, 2014

I have a workbook with two worksheets, "Main" and "Control".

Both of them are with hidden tabs (unchecked "show sheet tabs").

On worksheet "Main" I have command button which opens worksheet "Control".

The assigned makro is: Sheets("Control").Select

The problem is: when I open "Control" and close after that the workbook, the next time when I open the workbook "Control" pops-up instead of "Main" even though I do not save it.

1. I need macro on "Main" which will allow me to open "Control".

2. Regardless I "Save" or "Don't Save" "Control" when selected and workbook is closed, to open the workbook always displaying worksheet "Main".

I use Excel 2007 (at home) & 2010 (at office).

View 1 Replies View Related

Sort The Worksheet

Feb 23, 2007

I've attched my sample file.
The question is how to sort worksheet (VB) - see file for details

View 13 Replies View Related

Sort 2D Array Not Via Worksheet?

Mar 1, 2014

I'm trying to sort 2D array not via worksheet, using VBA array. But I failed. excel file enclosed (Sorting by Return and xlAscending).

View 2 Replies View Related

Sort All Data In EACH Worksheet At Once

Nov 7, 2006

I have a workbook with about 30 worksheets (I know not that many, but enough to make me want to automate the following)

They all have the same columns and headers.

I want to sort them ALL based on Column E for example. Is there a way to do this easily, with out having to "manually" sort each worksheet?

View 12 Replies View Related

Auto-sort In Worksheet

Mar 12, 2007

I have a worksheet in Excel which contains scores for a quiz I am organizing. The rows contain the team names, the columns the scores per round per team.
I would like to have the worksheet automatically sort the columns in descending order (so that the winner will come out on top after the quiz has finished), everytime I change something (everytime a score is updated). I can't find anything in Excel which would allow me to do that, so I'm guessing it's only possible in VBA? Unfortunately, I don't know anything about VBA, so I'm stuck.

These are the ranges I would like to have sorted, in order of priority:

Row 1 is the row with the column titles (Round 1, Round 2,...).
C2: C26
N2:N26
M2:M26
L2:L26
K2:K26
J2:J26
I2:I26
H2:H26
G2:G26
F2:F26
E2:E26
D2:D26

View 9 Replies View Related

Sort Worksheet Tabs

Feb 16, 2007

I found the following "sort worksheet tabs" code by searching through the threads.

Sub SortSheets()
Dim lCount As Long, lCounted As Long
Dim lShtLast As Long
Dim lReply As Long

lReply = MsgBox("To sort Worksheets ascending, select 'Yes'. " _
& "To sort Worksheets descending select 'No'", vbYesNoCancel, "Ozgrid Sheet Sort")
If lReply = vbCancel Then Exit Sub

lShtLast = Sheets.Count

This code works fine but I need to adjust it a little. I have over 70 worksheets that will need to be sorted. At the same time, there are about 6 worksheets that I dont want to sort and want to keep right infront all the time.

View 6 Replies View Related

Copy To Another Worksheet & Sort

Sep 19, 2007

After copying the data from a sheet to another the sort generates an error. write the vba for sorting the copied data?

Sheets("PM").Activate
norowspm = Sheets("PM"). Range("A65536").End(xlUp).Row
Sheets("PM").Range("A6:A" & norowspm).Select
Selection.Copy
Sheets("OP Vs CL").Activate
Sheets("OP Vs CL").Range("F1").Select
ActiveSheet.Paste
Application.CutCopyMode = False

Stop

Sheets("OP Vs CL").Range("F1:F" & norowspm).Sort key1:=Range("F2"), _
Order1:=xlAscending, header:=xlYes, _
OrderCustom:=1, MatchCase:=False, Orientation:=xlTopToBottom, _
DataOption1:=xlSortNormal

View 3 Replies View Related

Macro To Sort Current Tab Worksheet

Mar 25, 2009

I basically need a macro to sort the sheet by V, U, T starting from row 3 and ending before the last vechicle. This is the problem though, the last vehicle ends everytime right before Car # in column A. So in other words in this example i would need it sorted by v u t, starting from 3 down to row 12. It ends at 12 because the next line includes car and a number.

Another sheet might have a longer list of vehicles and might end at row 100 before the next line has car number .

It always starts at 3, but the ending is dynamic where it should stop its selection before "car number ".

I would also like it to work on the current sheet im on, because i have up to 100 sheets like this and would not want it name dependant. Just want to click on a tab, and run a macro and have it sort from 3 down to the line before car in column A.............

View 3 Replies View Related

VBA: Sort And Format A Worksheet After New Row Added

Apr 29, 2009

From the sample file, I am using the data on (start) worksheet. (Sort and format sheet) . This one is way over my head. After new data is added to the sheet via another UserForm, I want to sort the list by name and have alternating backgrounds based on grouped unique names.

View 2 Replies View Related

Button/Link On Worksheet To Sort

Jul 12, 2009

I would like to have a button or a link on my spreadsheet that when it is clicked will sort my table with a pre-defined sort.

View 3 Replies View Related

Macro To Sort Info On Worksheet

Nov 4, 2009

I need a macro to clear data on 2 worksheets that i can add to a button. lets say sheet1 B55:Y55 and sheet2 b102:y102

View 3 Replies View Related

Adding Sort Button To Worksheet

Dec 24, 2008

I have data in several (50+) columns. I want to be able to sort all my data by the column I select with one click. So, I basically want a button over each column that sorts the data by that column. It would be ideal to have the same "Sort" macro that is attached to all the buttons. The macro should somehow know that the column the button is in, is the column to sort by.

View 9 Replies View Related

Automatically Sort On Worksheet Activation

Sep 6, 2007

I'm trying to auto sort a list of ranks that are linked to another sheet. My sort code works when it referers to input number values, but when it refers to cells that have formulas, it does not recognize the value from the formula, only the formula itself. Any ideas would be welcome.

View 4 Replies View Related







Copyrights 2005-15 www.BigResource.com, All rights reserved