Copy Paste From One Sheet To Other In Particular Cell
Nov 21, 2012
I have data in Excel like below in excel sheet Need To copy and Paste each ROW
Need to Paste Each ROW in new sheet1,sheet2,sheet3. one by one.
A B C D E
1 Sri 89 H6 YES No
2 Pri 90 K1 No Yes
3 Lio 87 G5 No Yes
Need to copy above data In new file new Sheet need to paste in Particular Cell like below.
A1 Data in C2
B1 Data in D2
C1 Data in E2
D1 Data in F2
E1 Data in C4
View 1 Replies
ADVERTISEMENT
Mar 31, 2008
I would like a macro that will go to a fixed sheet, copy the format, go back to the previous sheet and paste the format. My problems arise going back to the previously activated sheet rather than just a fixed sheet.
View 2 Replies
View Related
Mar 18, 2014
I am very new to VBA and am trying to make a spreadsheet that has a data page and page 1. I would like the row from the data page to copy and paste into page 1 if column A=07-01 Carbonated Soft Drinks . Here is an example of the sheet. I usually use formulas for my spreadsheets and just could not find one for this.
View 2 Replies
View Related
Jun 6, 2014
I have a line of code that returns a run-time error 1004 whenever it is passed through. All I am trying to do is copy and paste. I am missing some glaring error? (It is only a selection of the code to highlight the part I am having issues with. "maxdate" and "d" have been set)
VB:
Dim ws, ws1 As WorkSheets
Set ws = ThisWorkbook.Sheets("Data")
Set ws1 = ThisWorkbook.Sheets("Target")
[Code].....
View 5 Replies
View Related
Nov 27, 2012
using VBA and most of what i know has come from reading through blogs. I'm trying to copy 5 separate pieces of data from one row on our Payroll sheet and paste this in to another sheet call master dump.
The issue that i am having is that the code i have written keeps coming up with a run time error 1004 at the line "a.Select"
What i need the code to do is this: Copy the data from cell A4 and paste this on to another worksheet in to row cell b2, date worked in to d2, pay code in ot f2, hours in to h2 and the cost centre in to ad. all on the same row. i then need it to move on to the next team member (in this case A5) and repeat until there is no emp#. once the monday is done it will need to move onto Tuesday.
Code below.
Sub payroll_data()
'
' Payroll_data_MON Macro
Dim a As Range, b As Range, c As Range, d As Range, e As Range, i As Range, j As Range, k As Range, l As Range, m As Range
Set a = Range("A4")
Set b = Range("I4")
Set c = Range("G4")
Set d = Range("H4")
[code]....
View 9 Replies
View Related
May 31, 2012
I have a workbook with two sheets. The idea behind the workbook is an Interview Guide to be used just before an Interview. For now my problem is this.
Sheet 2 "Competencies" is just data. It stores competencies with their associated definitions and questions.
Sheet 1 "Control Page" is the sheet where the questions will eventually go. The user (Interviewer) will input data on the first two pages which will include name of candidate, date of interview etc. but they will also select 5 Competencies from the already existing drop down menus on page two. From there as the selections are made I wish for a code to copy the corresponding definition on sheet 'Competencies" to cells lower down in sheet "Control page".
I don't see a place to upload a file as I have a sample of the sheet ready to go.
View 2 Replies
View Related
May 14, 2009
I have the following code in another workbook that is used to populate a cell on the same sheet based on input to cells in column 'A'.
Is it possible to modify this for the attached workbook to select a cell with data (numbers) on the Input Data sheet in column 'E', add text to the beginning, ('CG' in this case), and paste the result to the Import Template in the corresponding cell of column 'A'? I currently have a formula copied to dozens of cells in 'A' but since the number of rows for the Input Template is variable, there are usually cells in 'A' that contain CG but no corresponding data in the rest of the row.
View 8 Replies
View Related
Apr 10, 2014
I use an excel time sheet for my employees and I am wanting to use a command button to copy data in a cell from worksheet1 to worksheet2. The cell that will be copied from worksheet1 will always be "S14". I want to copy that data to another worksheet and have it paste the data in the correct cell. The code needs to find the employees name in worksheet2 and paste the data in the next blank cell. Currently the command button I have works perfectly but I have to use the specific range, I would rather have the code seek out the employees name on worksheet2 so that I don't have to worry about specific row/column ranges. Is it possible? I'm sure it is. I have attached what worksheet2 looks like.
Rather than having to use .Range("A4:AA4") I would prefer to have the code find the employees name.
Attached file: Book1.xlsx‎
View 14 Replies
View Related
May 12, 2014
I need to copy a couple cells from sheet2,3 and 4 to sheet1 depending on value of cell a2 of respective sheets.
I have the basic code here, and what I think I'm missing is the adding row in sheet1.
The below codes can be all wrong by the way, YES, I do not have much knowledge in Macro.
[Code] .....
View 1 Replies
View Related
Jan 16, 2014
creating a VBA that will scan my entire sheet and any cell with a date before todays date, the entire row will be copied and pasted to another sheet. and it should search every cell in sheet 1 and paste all rows with dates in the past. if there is more then one cell in a row with the date in the past, that row will copied only once.
View 14 Replies
View Related
Feb 9, 2009
I want to copy the data in "Sheet1" without the header and paste it in "Sheet2" but only paste it in the first blank cells because i sometimes have data in "Sheet2". i would also like to paste it as paste special method when pasting. See attached for details.
View 7 Replies
View Related
May 4, 2014
I have a sheet that gets updated from external source. For e.g. the B2 cell of sheet updates the date and C2 cell updates the value as on that date from the external link. Since, the value of the cells gets updated every time I open the sheet, I want to copy the value of cells to another sheet in chronological order ,when the file gets opened in different dates, so that I can present data in dynamic pie chart.
View 1 Replies
View Related
Nov 15, 2006
I have a excel file with two worksheets. I need to find a specific row in column g, cut the entire row, and paste it into sheet2. I have started off by using this code, that I got off of some site. It works wonderfully in finding the specific cell, but just copys and moves the specific cell into sheet2. Whereas I need it to cut and paste the entire row where it finds the cell that begins with a 3 in column G.
Sub Copy_To_Another_Sheet_1()
Dim FirstAddress As String
Dim myArr As Variant
Dim Rng As Range
Dim Rcount As Long
Dim i As Long
View 9 Replies
View Related
Apr 26, 2013
I would Need a macro which would Search a Keyword in the excel sheet and copies and pates the data in Cell "A2". for Example "Market" and then after the search it copies 12 rows upwards and 10 columns from the Cell that the word "Market" is placed. And then it copies 12 rows downwards and 10 columns from the Cell that the word "Market" is placed.
I have tried recording the same but it does not work if the Word "Market" is placed in different cell value.
View 2 Replies
View Related
Feb 12, 2014
I am trying to write a simple macro to copy a drop down list I created in cell O2 and then paste in the same sheet. I need it to paste starting in cell A2 and then move to A4 and so on for every even row cell through A9778. I would also like it to keep a border around the cell. I can't find direction on how to tell it every even cell or defining x and then doing x + 1...
View 3 Replies
View Related
May 4, 2006
What I am trying to do here is to compare 2 lists in 2 different files, and when there is a match, then copy and paste the related cells of the matching name. Sorry if this sounds messy, perhaps the sample file I have attached can explain better.
Every month I get a new file in the format of “Data Source” sheet where the list of banks in column A and the figures in column M, AA and AB might change from month to month. For the sake of convenience, I put the source data as a different sheet instead of different file here.
I have an existing report template in the format of “Final report” sheet where basically I copy and paste the relevant cells according to the name of the banks.
I don’t think I can use Vlookup because the cells that I want to extract are not right beside the search criteria. If I’m wrong please correct me.
Anyway, assuming a macro is needed for this, I am wondering if I can create a macro, where it can search the list of banks in column A in “Data Source” sheet based on the list in column A in “Final Report” sheet, then copy the correct cells from column M, AA and AB and then paste them into the correct cells in columns B, E and H in “Final Report” worksheet?
Note that not all the banks in the “Final Report” sheet are in the “Data Source”, so for this example, row 4 for ABN Bank should remain blank after the search because it is not listed in the “Data Source”. The Data Source List might also change over time.
There is also this problem of the bank names from the “Data Source” sheet not being exactly the same as the existing list in “Final Report”. For example in this file, ANZ Bank in the other sheet have all the extra stuff behind, but we know it is the same bank.
View 9 Replies
View Related
Jan 29, 2014
I would like to implement specific cell ranges from two specific worksheets each within 33 workbooks (which all have several tabs) into a summary page in a separate workbook.
The cell ranges are going across my spreadsheet in rows and I would like for them to transpose into a columns depending on the data which I have separated by catergory on the summary page. They are all on the same location in each workbook which is separated by country. The cell ranges are E26:P37 and I would like to transpose them and have them put below eachother without overwriting for my format on the summary page, how I can put this together in a macro?
View 1 Replies
View Related
Jun 20, 2013
Attached is my code, pay attention to the bold part. I want the sourceSheet to be copied as a sheet and pasted in the targetSheet (the Sheet2 of "NewBook") but I want it pasted asvalues. Here is the specific part which needs to be looked at...and below is the full code.
VB:
Set sourceBook = Application.Workbooks.Open(sourceFilename)
Set sourceSheet = sourceBook.Sheets("Current")
Set targetSheet = NewBook.Sheets("Sheet2")
[Code].....
View 9 Replies
View Related
Sep 6, 2012
copy/paste Every Sheet Single ( P Column ) and Paste to Notepad and take P1 As file name for note pad.
View 1 Replies
View Related
Mar 3, 2014
Can I paste text inside a box on sheet 1 that automatically paste into a cell in sheet 2? I'm trying to make sheet one look more like a web page. I want to be able to create text boxes on sheet one that will automatically copy the text into a certain cell in sheet 2. Seems like I seen something a long time ago where you go to sheet2 and in the cell you want the text to show up, you type in something like =sheet1 box1 .
View 1 Replies
View Related
Jan 22, 2007
I want to copy and paste from one sheet to another based on column a using a macro copy button.
E.g. if column a value = apple then copy that row into the apple sheet.
View 9 Replies
View Related
May 26, 2013
I am trying to put togther a VBA form button click to do the following: I have several customer names all in master sheet A1 - A300. I want the code to notice that there is a new customer and generate a new sheet, naming the sheet the customers name and copying and paste the entire sheet named 'worksheet' to this newly generated sheet.
View 2 Replies
View Related
Aug 21, 2014
I'm trying to create a command button on my sheet that when clicked will find all rows in column u that read Engineering Evaluation and then copy certain cells from that row to another sheet. The kicker is that this button will be used over and over again as more entries are entered into the log. I only want each row counted once.
Right now I get a run time error for the "For Each Cell In Application.Intersect(Range("u:u"), target)" line.
View 6 Replies
View Related
Apr 3, 2007
Everything seemed to be working until i tried to copy and paste something on my spreadsheet (sheet titled Input Sheet). When I paste anything onto this sheet I see the Paste happen and then Excel just hangs (no errors?). I just left it for over 5 minutes and nothing happened (still hanging). I had to close it down using X
I have LOTS of different codes and different sheets in my spreadsheet. I was wondering if anyone knows how I can go about Pinpointing the problem. Chances are no one will be cutting and pasting but I would like to know why this is happening but have no idea how to go about investigating?
View 9 Replies
View Related
Jul 29, 2014
How to create macros. I need to copy a certain group of cells from one sheet to another, and then do it for x number of times. I'm just using the record function and now i'm lost. Here is the code i currently have:
Sheets("Mapping QTR2").Select
Range("B137:D230").Select
Selection.Copy
Sheets("ExpDB_Q1").Select
[Code] ....
Also, column C is blank. i would like to get the values from another list in the same workbook, say "branch list". I would like to populate Column C with one specific branch for each "batch", if that makes any sense...
View 3 Replies
View Related
Mar 11, 2014
I have a sheet named "Fittings Summary" with an export button. I need some code that will copy range A1:G38 of the fitting summary sheet then open a dialogue box asking for the following "Please Enter Tag No" once a tag number is entered I would like a new sheet to be created in the same workbook named with the tag no entered previously then the copied cells pasted into it. I would like to keep the formatting of the cells but not the formulas within.
View 10 Replies
View Related
Jan 20, 2009
I would appreciate if someone can help me figure out a macro that will copy range (A3:T112) from "Step 1" sheet to next available row in "Step 2" sheet.
View 8 Replies
View Related
Mar 5, 2009
i want to copy a row from one sheet and paste it in another sheet based on a condition.
View 5 Replies
View Related
Jul 26, 2012
I have set up a workbook with sheets named for each month.
I have 70+ separate excel files (one for each month) that each have a single sheet I want to copy into the new workbook's corresponding month sheet.
Each file is named different but the name of the sheet in those files that I need will all be the same.
Is there a way I could sit in the sheet I want it pasted to, run a macro that I can point to the correct file/workbook -- preferably without opening -- and then have it copy the contents of the sheet I want (again, will always have the same sheet name).
I want the sheet copied with formatting and all, an exact copy.
This link seemed useful - if i could control which sheet it copies more easily since for me the source data always has a different file name. [URL] ........
I thought I lost that original message so I rewrote everything - differently - then I saw the restore button so I'm leaving both phrasings.
I would like to know if there is a Macro that could ask me which workbook to copy from, select the sheet in that workbook called CAP (sheet will always have the same name but I need to copy the sheet from 70 different files/workbooks) copy the whole sheet with formatting and all, and then paste it in my active sheet on the new workbook I am in.
I want to take data about a particular partner we have (CAP) out of the monthly summaries for the last ~72 months (which each have their own file/workbook) and put them all in one workbook just for this partner, on each sheet by month still.
I am only interested in automating everything I have to do for 1 month, but in a way that would easily let me do it again for the next month, and the next and the next, 70 times.
But a Macro would still be easier than opening each file, going to the sheet I want, copying everything, going back to my new workbook, pasting everything, closing the extra workbook, then doing that ALL again 70 times.
View 1 Replies
View Related
Mar 27, 2014
Is there a vba codes to copy all data from sheet 1 to 5 in workbook to sheet 6 same workbook? and paste it as value.
View 5 Replies
View Related
