Find Specific Cell, Copy Row And Paste Into New Sheet
Nov 15, 2006
I have a excel file with two worksheets. I need to find a specific row in column g, cut the entire row, and paste it into sheet2. I have started off by using this code, that I got off of some site. It works wonderfully in finding the specific cell, but just copys and moves the specific cell into sheet2. Whereas I need it to cut and paste the entire row where it finds the cell that begins with a 3 in column G.
Sub Copy_To_Another_Sheet_1()
Dim FirstAddress As String
Dim myArr As Variant
Dim Rng As Range
Dim Rcount As Long
Dim i As Long
View 9 Replies
ADVERTISEMENT
Mar 31, 2008
I would like a macro that will go to a fixed sheet, copy the format, go back to the previous sheet and paste the format. My problems arise going back to the previously activated sheet rather than just a fixed sheet.
View 2 Replies
View Related
Nov 4, 2009
I want to copy some data from internet and paste it in to worksheet location Range A1:A30. the data look like following information.
LocationKuwaitP.O.Box:4819 SafatAddress:ShuwaikhTel:-22253580Fax:-24343645Category:CONSTRUCTION COMPANIES
the above information have following header ie. Location, P.O.Box, Address, Tel, Fax and Category.
every time one of the header inforamtion is missing ie. Address or P.O.Box, Or Fax, due to this problem every time cell address of information aganist header is change. supose in first copy/paste Tel inforamtion is in A15, but second time it may be on A13, and 3rd time it may be on A17 and so on.
I want to make a macro which search header ("Location", "P.O.Box", "Address", "Tel", "Fax", "Category" ) from a Range A1:A30. than down two steps to copy header information (75325412) and paste in fixed cell location C1:C5 (C1=Name, C2=Location, C3: P.O.Box, C4=Address, C5=Tel, C6=Fax, C7=Category) in same sheet. and repeat the steps to copy information aganist header from all header in Range A1:A30.
View 9 Replies
View Related
Jan 20, 2009
I would appreciate if someone can help me figure out a macro that will copy range (A3:T112) from "Step 1" sheet to next available row in "Step 2" sheet.
View 8 Replies
View Related
Sep 27, 2009
Yeah it is 1:33 am where I am.
I'd like to filter a column and paste only 2 columns to another sheet in the first available row.
I found a code that was posted by Tom Ogilvy and made a few adjustments: ....
View 14 Replies
View Related
Mar 24, 2009
There's one sheet that has a list of customers (this is updated very frequently). These customers are either ‘New’ or ‘Existing (as listed in a corresponding column) - would it be possible to have a macro that, when run, will place a copy of existing customers into a second worksheet (“view list – new”), and a copy of new customers into a third worksheet (“view list – existing”), with the main worksheet still listing both existing and new customers.
As the main sheet that lists all customers is updated very frequently (with customers being added and removed throughout the day), would it be possible to clear all contents of the other two sheets that each list of 'existing' and 'new' customers will be copied into, before the two lists are copied into each of the two sheets (just to ensure there isn’t any data in there from the previous time each list was copied in).
I’ve given this a go via the ‘record macro’ function - some users of this WB use excel 2000, and others use excel 2007, but it only seems to work on excel 2007 (which is what it was recorded on)…
View 3 Replies
View Related
Oct 16, 2013
I have a value in sheet3 cell "C9". (the value is stewart)
I am tring to have the macro go down column "C" in sheet1 and the value is the same as "C9"s value in sheet3 then copy the 7 cells to the right and paste them in the 7 cells right of "C9" in sheet3.
Example: If the value in cell "C9" in sheet3 = "stewart" and the value in "C109" in sheet1 is "stewart" the copy C110:C116 in sheet1 and paste those values in C10:C16 in sheet3.
I guess you wouldn't have to offset, you could copy C109:C116 and paste it to C9:C16 since its the same value.
View 9 Replies
View Related
Nov 7, 2012
Basically, I need to copy and paste upon certain condition (references) and paste related-datas in another sheet corresponding with these references. Every references are organized by lines with indicators on columns.
In attached file, see:
- worksheet ANALYSIS:
* datas in E2, G2, D18, D19, D20, D21, D22 that needs to be copy based on reference in C2,
* then need to find this reference in worksheet called GROUP SAVE,
* and based on this reference, paste above cells value in corresponding "Indicators" column number
THEN, I will have to do pretty much the same with subgroup data. But I can figure out for this second step that request same manipulation.
View 3 Replies
View Related
May 28, 2013
Essentially I need to copy the first 8 cells in a row in one sheet (for example: A3:I3) when the word "Actuals" is entered into A3 from a drop down list. Then the copied data needs to be pasted to a another existing worksheet in the same workbook in the next available row. The data includes mostly values, but there is a formula in column H that creates a hyperlink out of the content in column G, friendly name in column I.
I am not stuck on the idea of having "Actuals" entered in column A as the trigger or change event and there will be times when a new copy/paste of the same data will need to be done more than once at a later date.
For further information, column B contains a serial number/productID number.
View 9 Replies
View Related
Jul 9, 2009
Thank you all so much for this wonderful forum. Today has been a day of going through post after post. I am usually able to solve my problems through reading similar issues. However, just can quite get this one and I think it is rather simple, but frustrating none the less.
Attached is a spreadsheet with a list names in column B. The codes I have tried to write or have copied find one name and paste it to sheet 1. However, I need to find several names and then copy each row to sheet 1.
View 14 Replies
View Related
Feb 21, 2012
I need to firstly find data in the main sheet which relates to the activecell and then I want to copy and paste that data into another worksheet.
The simplest of ways I guess would be the .xldown function however this seems to copy the blank cells as well as the cells with data, which is no good. I have therefore written code as below which finds the first cell with data, copies and pastes, then loops.
How do I set the loop to look at the next cell down from the initial copied cell and if there is data in it to paste it into the cell underneath the one I have just pasted into?
Range("D3") = ActiveCell.Offset(0, 1)
SheetName = Range("D3")
ActiveCell.Offset(0, 2).Select
[Code]....
View 7 Replies
View Related
Apr 9, 2006
Looking for days and I have tried all kinds of things but nothing works. The lates was the Kickbutt find function. Let me explain what I am tring to do. I have an estimate work book with 11 diffrent sheets of material. When I create an estimate I go thru the sheets and select the quanitity of each material needed. What I would like to do is search thru all the sheets and find all the quanititys in column A greater than 0, the copy the complete row A to F to a sheet named FoxOrd.
Trying AronBloods "Kickbutt find function" seemed to be the code to use but I could not get x = " >0 " to work. So I got rid of all the default 0 in the qty column and just left it blank and changed the code to x = "*" which searched and found all the numbered rows but this included the header row when pasted to the order sheet
View 5 Replies
View Related
Oct 9, 2009
Essentially, I have 2 Sheets:
"SheetWSS" = data to be copied
"SheetWSD" = destination of copied data.
Below is a sample of the data in "SheetWSS"
----------A------------------------B-------------------------C
1------Trade ID -------Description---------System no.
2--------579----------------Loan ---------------------- 7
3--------580----------------Deposit---------------------22
4--------702----------------Deposit--------------------- 11
5--------703----------------Loan ----------------------- 58
6--------732 ---------------Loan------------------------66
7--------733----------------Deposit-------------------- 99
etc...(no more than 10000)
Now, an explanation of the data:
1) I work for a small bank (CORP) that takes deposits and gives loan.
2) CORP books these trades using only system no. 7 and 11; other system nos. belong to customers.
3) When a single trade is booked, the 2 sides of the transaction is recorded (by Trade IDs) . E.g rows 2 and 3 relates to one trade. So if CORP loans money with system no.7 to CUSTB, who uses system no.22, it shows for CORP a loan and for CUSTB, a deposit.
4) Everyday, the data in "SheetWSS" is updated with a different number of rows from previous, but the number of columns remain the same.
So, here's what i'ld like the macro to do:
1) Go into Column C, find system no.7 and 11.
2) For each 7 and 11 found, Copy the next row . So if for e.g, system no.11 was found in C4, i want the ENTIRE ROW 5 to be copied.
3) Paste the entire next row in "SheetWSD" until we have a list of all opposing sides of the same transactions initiated by CORP.
View 3 Replies
View Related
Jan 7, 2013
Purpose:
Build a roster from:
Sheets(Settings).Range("A21").Value (this value is variable)
Problem:
Find that A21 value in Range T2:T100 (each value in the range is unique)
Copy that value to Sheets("Roster") E8
and the next 9 values to
E14
E20
E26
E32
G2
G14
G20
G26
G32
Reason for posting: I've been trying to do this with vba but sheet formula will probably work, I can always Copy/Paste Special/Values to clear the formula. Keyword searching has resulted in no progress.
View 2 Replies
View Related
Dec 30, 2011
how to work macros or VBA
I have a workbook with multiple sheets named by month and year that I use to keep track of loans I work with at a bank. In these sheets I have info such as:
Column B = due date
Column D = loan# A
Column E = loan# B
Column F = status
Column H = followup needed
(Columns A,C, and G aren't important for the current need)
What I am trying to do is create a main sheet (TRACKER) that all I will have to do is press a macro button and it will pull info for each loan that is in a pending status.
I need a macro that will search column F (Status) on all sheets and find each instance of "Pending" and once that is done, copy rows B,D,E, and H in each "Pending" instance and copy them to their designated area on my TRACKER sheet. After that is done I need it to continue to the next "pending" instance and do the same on the next available line on my TRACKER sheet.
The overall goal would be that everyday I can press the macro and it will repopulate the sheet with the current pending items (as each day I will change pending status' to complete and no longer need to track it the next day).
I already have the tracker sheet set up and ready to go with the spaces as follows:
Column G&H = Merged cells where due date will need to go
Column I&J = Merged cells where loan# A will need to go
Column K&L = Merged cells where loan# B will need to go
Column M thru S = Merged cells where followup needed will need to go
View 9 Replies
View Related
Jun 19, 2014
I have data that is on a separate .txt file (the source file) that resembles this;
A
B
C
D
E
F
1
Case
District
Pct
Division
Level1
Level2
2
305035
0
20
72
[Code] ..........
Using VBA from within the destination workbook, I would like to use an input box that allows the user to request/specify what numerical number (0 through 55) in Column B of the txt file (the source file) will be used to determine what data to copy to the destination file. The cells to copy to the destination file would be from Column A through Column G of the source file onto Sheet1, E2 of the destination file.
Column B of the Source file will only contain numbers. However there will be numerous identical numbers in Column B. All of which will need to be copied onto the destination workbook.
From the sample above, if the user were to enter '15' in the input box, the desired result on the destination sheet beginning at E2 would look like this;
E
F
G
H
I
J
1
Case
District
Pct
Division
Level1
Level2
2
502046
15
1
3
[Code] ............
View 9 Replies
View Related
Sep 21, 2013
I have a file that has simple stats for multiple days. At the end of each day is a "Summary" line. I can't figure out how to find the lines that have the word Summary in them and copy all the values in that line to another sheet. I've made a mock up of my data. I have minimal experience with Macros, but am learning quickly.
Period Start
Calls
AHT
Sch
Net
SL Calc
12:00 AM
15
299
5.5
1.24
93.33
[Code] .....
View 4 Replies
View Related
Dec 19, 2011
I need to find the last instance of "IO" in column E and copy cells in columns B to E for the row below to another tab called "OP" cell O9.
I need the VBA code for Excel 2003.
View 1 Replies
View Related
Aug 29, 2007
I have a cell that contains various data but in the cell there will be a string of characters that will begin with either ON or TN followed by numbers. What I would like to do is have the sheet look at that cell and if there's a TN12345 (or any combination of numbers) or an ON123456 (same idea as the TN) I would like the sheet to pull just the ON or TN number out and paste it in a specific cell. The ON would have it's own cell to be placed in as would the TN.
Here's an example. C5 contains various data, a mix of text and numbers but it will have either an ON or a TN or both. I would like the sheet to automatically pull the TN number out and place it in A5 and the ON in B5. I would like this process to repeat all the way through the sheet to the max amount of rows since I have no way of knowing how many rows I'll need. Can this be done with a simple IF formula or does it have to be done in VBA or is it not possible at all.
View 7 Replies
View Related
Aug 11, 2013
I use the following codes to copy a cell which contains a picture and paste it to another worksheet. I think these codes copy more than just the picture.
Since pictures in Excel are not associated with cells, how do I copy just the picture in a particular cell and how to determine the size of the picture?
These codes are in a for loop.
Code:
tempCell.Offset(0, -1).Copy
Workbooks(fileName & ".xlsx").Activate
Workbooks(fileName & ".xlsx").Sheets(1).Cells(cell.Row, cell.Column - 1).Select
Sheets(1).Pictures.Paste
Workbooks(fileName & ".xlsx").Sheets(1).Cells(cell.Row, cell.Column - 1).RowHeight = tempCell.RowHeight
View 3 Replies
View Related
May 20, 2008
I've searched for a solution on the board and the internet too but to no avail; I am trying to create a macro that will select the entire column based on a cell reference G1 which is infact a Date.
Column G to Column S are pre-defined with a specific Date in row 8. If the Date in one of these columns (G8 to S8) match with the Date in cell G1, say it finds a match with H8, then I want to copy the range F14:F2000 and paste as values in range H14:H2000. The possibility of a match found is limited to a single columns from G to S.
View 9 Replies
View Related
May 31, 2007
From mySQL database, i am getting a ton of data that is all being inputted into a single excel cell. Within this cell, there are certain data points that i wish to obtain (Bank #, SSN #, Routing #). There are multiple difficulties in obtaining this information.
1. these cells contain the same fields, but different number of total characters (differing in names, addresses, etc.)
2. some of the data points (like SSN) are inputted incorrectly, so even though a SSN is only 9 digits/characters, I may have to output all 11 that the SQL database placed within the cell.
Can I get some help? I'm thinking of a search function/macro within excel, because all of the fields show up correctly.
something like (i know this doesn't work)
= or("cellA1" contains/finds/function SSN,return the 9 characters after "SSN ")
um...yeah. difficult to explain, i'm sorry!
edit: not sure what is wrong the file. I have attached a new one.
View 9 Replies
View Related
Jul 26, 2013
I want to find data from a certain point and paste this to a cell. My objective is to get all the data on too one row. This row is always 1 in col M called Run#. The find locations never change, just the data being copied always changes . Heres example,
In col K find FHBASC and look across to the right 3 cells in col N and copy.
Look in col M and find 1, paste above copied data into col GI.
Then move down rows to next FHBASC and repeat process until end of sheet.
If I can get a very basic simple macro to do this, then hopefully I can just re write to suit my other data.
View 9 Replies
View Related
Mar 20, 2005
I am using MS Excel 2000. Sheet1 is my working sheet. Cell A17 displays the current date (dd/mm/yyyy). Cells B17:K17 display my summary figures for that day. What I would like is a macro button that would look at the date in Cell A17, and if it is the first of the month …. eg 01/03/2005 it should insert a new sheet into the workbook and put the name Mar05in this case or what ever month it is on the tab. It then copies Cell A17:K17 and pastes the data in to the corresponding monthly sheet starting in A3 to K3. Because my working sheet (Sheet1) is updated with different data daily the new summary data (always in A17:K17) needs to be copied and pasted under the previous days entry in the corresponding monthly sheet. For the month of March I should end up with 31 entries giving me a summary for that month.
View 7 Replies
View Related
Jun 23, 2014
I am using the code below in Excel 2013.
Sub Test()
For Each Cell In Sheets(1).Range("J:J")
If Cell.Value = "131125" Then
[Code]....
This works great except that it pastes formulas. I would like to paste values only. I've tried
" PasteSpecial Paste:=xlPasteValues, Operation:=xlNone, SkipBlanks _ :=False, Transpose:=False" and it gives me an error.
View 3 Replies
View Related
Apr 27, 2009
I have rather large Excel file that spans around 245 columns & has multiple users responsible for certain columns. Columns are chunked to provide data about a specific group. Every 72 hours, I need to provide to managers what’s currently on this file in a specific summary format.
I’ve recorded a macro that gets me half way there. Here’s where I’m clueless. After my macro deletes unnecessary columns, what remains are the columns for “Main Data” group + each of the 5 “Business” groups (Investors, Lawyers, Credit, Finance, and Support) which would have identical column headings.
(1) Name (2) Address (3) ID# (4) Control#
Furthermore, for each of the 5 “Business” groups, there are 9 slots (ie- a user can enter up to 9 unique entries for a particular group.)
Example- The Investor group contains 9 slots. Each slot will contain the 4 columns mentioned above. So there are 46 slots in total – 1 for Main Data, 45 (5 groups x 9 slots) for Business groups.
MAIN DATA (columns A-D)
Investor1 (columns E-H)… Investor2 (columns I-L)… Investor9 (columns AK-AN)
Lawyer1… Lawyer9
Compliance1… Compliance9
Finance1… Finance9
Support1… Support9
MY PROBLEM: I need a macro to now cut & paste all data from each of the 45 Business groups slots & then paste at the bottom of the MAIN DATA slot.
The final file would be 4 columns (as listed above) wide. Data from each of the 45 business group slots would be one below the other- all of it underneath the data in the Main Data group.
I attempted to record a macro where I’m copying a section’s data range starting from row2 to row4000 (I know there will never be 4000 entries. I did this just to ensure that all future data would be captured) then pasting that after the last entry in the Main Data.
Example- I’d copy data from Investor1 slot(starting at column E2-H2) & go about 4000 rows down. Then I’d press CTRL+Down Arrow key in column A & then click the down arrow one time to take me into 1st empty cell where I would paste my copied data. I was going to repeat this process for the remaining 44 slots.
I’ve added some extra entries to test the macro & the problem is that the recorded macro is pasting data in specific cell location in column A instead for looking for the 1st empty cell in column A & then pasting the copied data.
So far I've gone thought the net & tried to paste in a few VBA posts/tips that I thought would work. Here's what I have so far from tinkering around. I need someone to tell me what to replace the xxxxxxx line with. This would be the language to tell Excel to paste copied data range into the first blank cell in column A. I've gone thought the net & tried to paste in a few VBA posts/tips that I thought would work.
Here's what I have so far from tinkering around. I need someone to tell me what to replace the xxxxxxx line with. This would be the language to tell Excel to paste copied data range into the first blank cell in column A.
Sub transposedata()
Sheets("ConsolidatedYTDReport").Select
Range("E2:H4202").Select
Selection.Copy
XXXXXXXXXXXX
ActiveSheet.Paste
End Sub
View 10 Replies
View Related
Feb 1, 2009
I have a data sheet with employee information. Only one column. It prefixes information with codes, but keeps it in the same cell. I want to move data of certain types into their own columns, but the amount of data is variable, so I cannot simply move every Nth cell, etc.
i.e.
Employee#1
200 Firstname Lastname
204 99999999 (Employee ID)
G38 00005000 (i.e. Pension Deduction)
H38 00007580 (i.e. Benefits Deduction)
X96 00012099 (i.e. Staff Club Deduction)
Employee#2
200 Firstname Lastname
204 99999998
G38 00000775
X96 00001000
So you see some employees may have different codes altogether. But I know that I want all the cells that start with 200 to be offset (-1,1), and all the cells that start with 204 to be offset (-1,2), and so on so that basically I end up with columns of info instead of a one column list.
I have been reading and studying other peoples' macros, and am just starting to grasp the basic. When I wrote my own to accomplish this, I put this together, which doesn't work. But I don't know enough to know what I don't know.
View 7 Replies
View Related
Jan 8, 2014
first need to look for "PR" in column G, if found need to cut the entire row and insert at the top of the same worksheet.
View 1 Replies
View Related
Apr 5, 2008
I have found many posts similar to what I am trying to accomplish, but nothing that I have been able to modify and make work. I need a VBA script that will find a cell with the text data "Difference" and copy the adjacent (to the right) cell's data. I then need to find a cell with text data "Ops" and paste the previous data to it's adjacent cell.
View 3 Replies
View Related
Nov 5, 2013
Let's say sheet - "delivery" - has a row1 that includes all possible delivery days. So A1 is 1.9.2013, B1 is 15.9.2013, C1 is 1.10.2013 and so on.
I want to make a macro, that will gradually go through whole row 3 in sheet "delivery" and look for "A1" date in sheet "Orders". Sheet "orders" have for example in column B the date of delivery, and in column C product of the delivery.
I want the macro to find all deliveries with "A1" date, and paste all products that will be delivered on this day under cell A1 (sheet delivery). then move on to the cell B1 (sheet delivery) - find all orders in sheet orders, that will be delivered on B1 date, and list all products with this delivery date under cell B1 (sheet delivery).
Example:
Sheet order
A
B
C
Date of delivery
Product
1.9.2013
orange
[Code] ........
Unfortunately simple Pivot table is not able to do this simple list.
View 3 Replies
View Related