I need to copy a couple cells from sheet2,3 and 4 to sheet1 depending on value of cell a2 of respective sheets.
I have the basic code here, and what I think I'm missing is the adding row in sheet1.
The below codes can be all wrong by the way, YES, I do not have much knowledge in Macro.
[Code] .....
I have tried to these through formulas without success but i think i need VBA also which i am not very experienced.
I want to paste a list in the "InsertList" sheet. This list will only contain the word "Correct" or "False". From then on i need a way to search for the word "Correct" or "False" in the columnS P,Q,R,S,T,U,V.
e.g. If in the column "P" on the "InsertList" sheet the word "Correct" is found, i need that entire row from A to V to be copied onto it's destination, in this case "sheet1".
If the word "Correct" is found on the column "Q" on the "InsertList" sheet, the rows from A to V need to be copied in the Sheet2. And so on..
sheet1.png
Attachment: dropbox.com/s/vgs4kzhoa1pip0a/CopyRows.xltm
I would like a macro that will go to a fixed sheet, copy the format, go back to the previous sheet and paste the format. My problems arise going back to the previously activated sheet rather than just a fixed sheet.
View 2 Replies View RelatedI am very new to VBA and am trying to make a spreadsheet that has a data page and page 1. I would like the row from the data page to copy and paste into page 1 if column A=07-01 Carbonated Soft Drinks . Here is an example of the sheet. I usually use formulas for my spreadsheets and just could not find one for this.
View 2 Replies View RelatedI have data in Excel like below in excel sheet Need To copy and Paste each ROW
Need to Paste Each ROW in new sheet1,sheet2,sheet3. one by one.
A B C D E
1 Sri 89 H6 YES No
2 Pri 90 K1 No Yes
3 Lio 87 G5 No Yes
Need to copy above data In new file new Sheet need to paste in Particular Cell like below.
A1 Data in C2
B1 Data in D2
C1 Data in E2
D1 Data in F2
E1 Data in C4
I have a line of code that returns a run-time error 1004 whenever it is passed through. All I am trying to do is copy and paste. I am missing some glaring error? (It is only a selection of the code to highlight the part I am having issues with. "maxdate" and "d" have been set)
VB:
Dim ws, ws1 As WorkSheets
Set ws = ThisWorkbook.Sheets("Data")
Set ws1 = ThisWorkbook.Sheets("Target")
[Code].....
using VBA and most of what i know has come from reading through blogs. I'm trying to copy 5 separate pieces of data from one row on our Payroll sheet and paste this in to another sheet call master dump.
The issue that i am having is that the code i have written keeps coming up with a run time error 1004 at the line "a.Select"
What i need the code to do is this: Copy the data from cell A4 and paste this on to another worksheet in to row cell b2, date worked in to d2, pay code in ot f2, hours in to h2 and the cost centre in to ad. all on the same row. i then need it to move on to the next team member (in this case A5) and repeat until there is no emp#. once the monday is done it will need to move onto Tuesday.
Code below.
Sub payroll_data()
'
' Payroll_data_MON Macro
Dim a As Range, b As Range, c As Range, d As Range, e As Range, i As Range, j As Range, k As Range, l As Range, m As Range
Set a = Range("A4")
Set b = Range("I4")
Set c = Range("G4")
Set d = Range("H4")
[code]....
I have written a code for reading the excel and capturing the content as an image but now i want to paste the captured content into another sheet of the same excel and want to add new column in the same captured image?
Is it possible to add a column in the captured image?
I have a workbook with two sheets. The idea behind the workbook is an Interview Guide to be used just before an Interview. For now my problem is this.
Sheet 2 "Competencies" is just data. It stores competencies with their associated definitions and questions.
Sheet 1 "Control Page" is the sheet where the questions will eventually go. The user (Interviewer) will input data on the first two pages which will include name of candidate, date of interview etc. but they will also select 5 Competencies from the already existing drop down menus on page two. From there as the selections are made I wish for a code to copy the corresponding definition on sheet 'Competencies" to cells lower down in sheet "Control page".
I don't see a place to upload a file as I have a sample of the sheet ready to go.
I have the following code in another workbook that is used to populate a cell on the same sheet based on input to cells in column 'A'.
Is it possible to modify this for the attached workbook to select a cell with data (numbers) on the Input Data sheet in column 'E', add text to the beginning, ('CG' in this case), and paste the result to the Import Template in the corresponding cell of column 'A'? I currently have a formula copied to dozens of cells in 'A' but since the number of rows for the Input Template is variable, there are usually cells in 'A' that contain CG but no corresponding data in the rest of the row.
I have a workbook, wich copies content from an overview sheet to different other sheets. that works fine, but if I try to hide the content-placeholder sheets, I can't copy my content anymore.
here the part where I get the error;
'OldValue contains the name of the "copy to" sheet as a string
Sheets(OldValue).Select
I use an excel time sheet for my employees and I am wanting to use a command button to copy data in a cell from worksheet1 to worksheet2. The cell that will be copied from worksheet1 will always be "S14". I want to copy that data to another worksheet and have it paste the data in the correct cell. The code needs to find the employees name in worksheet2 and paste the data in the next blank cell. Currently the command button I have works perfectly but I have to use the specific range, I would rather have the code seek out the employees name on worksheet2 so that I don't have to worry about specific row/column ranges. Is it possible? I'm sure it is. I have attached what worksheet2 looks like.
Rather than having to use .Range("A4:AA4") I would prefer to have the code find the employees name.
Attached file: Book1.xlsx‎
creating a VBA that will scan my entire sheet and any cell with a date before todays date, the entire row will be copied and pasted to another sheet. and it should search every cell in sheet 1 and paste all rows with dates in the past. if there is more then one cell in a row with the date in the past, that row will copied only once.
View 14 Replies View RelatedI want to copy the data in "Sheet1" without the header and paste it in "Sheet2" but only paste it in the first blank cells because i sometimes have data in "Sheet2". i would also like to paste it as paste special method when pasting. See attached for details.
View 7 Replies View RelatedI have a sheet that gets updated from external source. For e.g. the B2 cell of sheet updates the date and C2 cell updates the value as on that date from the external link. Since, the value of the cells gets updated every time I open the sheet, I want to copy the value of cells to another sheet in chronological order ,when the file gets opened in different dates, so that I can present data in dynamic pie chart.
View 1 Replies View RelatedI have a excel file with two worksheets. I need to find a specific row in column g, cut the entire row, and paste it into sheet2. I have started off by using this code, that I got off of some site. It works wonderfully in finding the specific cell, but just copys and moves the specific cell into sheet2. Whereas I need it to cut and paste the entire row where it finds the cell that begins with a 3 in column G.
Sub Copy_To_Another_Sheet_1()
Dim FirstAddress As String
Dim myArr As Variant
Dim Rng As Range
Dim Rcount As Long
Dim i As Long
This is also in sheet1 module ( It cuts the respected row and pastes in sheet2 when date/time is populated in column 14 by double clicking).
[Code]....
I have 11 worksheets in one workbook, the last worksheet is a total page.
I'd like to run a macro that copies the information from each sheet and pastes it into the total sheet. My range on every sheet begins at A2, but the end of the range is unknown.
All I have so far is trying to loop to a new empty cell on the total page (coded in a module - is that right?):
I would Need a macro which would Search a Keyword in the excel sheet and copies and pates the data in Cell "A2". for Example "Market" and then after the search it copies 12 rows upwards and 10 columns from the Cell that the word "Market" is placed. And then it copies 12 rows downwards and 10 columns from the Cell that the word "Market" is placed.
I have tried recording the same but it does not work if the Word "Market" is placed in different cell value.
I am trying to write a simple macro to copy a drop down list I created in cell O2 and then paste in the same sheet. I need it to paste starting in cell A2 and then move to A4 and so on for every even row cell through A9778. I would also like it to keep a border around the cell. I can't find direction on how to tell it every even cell or defining x and then doing x + 1...
View 3 Replies View RelatedWhat I am trying to do here is to compare 2 lists in 2 different files, and when there is a match, then copy and paste the related cells of the matching name. Sorry if this sounds messy, perhaps the sample file I have attached can explain better.
Every month I get a new file in the format of “Data Source” sheet where the list of banks in column A and the figures in column M, AA and AB might change from month to month. For the sake of convenience, I put the source data as a different sheet instead of different file here.
I have an existing report template in the format of “Final report” sheet where basically I copy and paste the relevant cells according to the name of the banks.
I don’t think I can use Vlookup because the cells that I want to extract are not right beside the search criteria. If I’m wrong please correct me.
Anyway, assuming a macro is needed for this, I am wondering if I can create a macro, where it can search the list of banks in column A in “Data Source” sheet based on the list in column A in “Final Report” sheet, then copy the correct cells from column M, AA and AB and then paste them into the correct cells in columns B, E and H in “Final Report” worksheet?
Note that not all the banks in the “Final Report” sheet are in the “Data Source”, so for this example, row 4 for ABN Bank should remain blank after the search because it is not listed in the “Data Source”. The Data Source List might also change over time.
There is also this problem of the bank names from the “Data Source” sheet not being exactly the same as the existing list in “Final Report”. For example in this file, ANZ Bank in the other sheet have all the extra stuff behind, but we know it is the same bank.
I am trying to format cells based on what is in them across the board. Is there a way to conditional format based on what is in certain cells? I have 5 columns. I need to color in every NA only in the rows that have 1 or less cells with a number in there. So if there is 2 cells in that one row that have a number in them then leave the whole row white. If there is only 1 number in that row and the rest are NA then color all the NA's in red......
View 4 Replies View RelatedI am looking for a macro that will copy the text-based contents of a random cell in the range B100:B135 to a callout text box. The name of the callout is Autoshape 13. The callout should be cleared before pasting the contents of the next random cell into it. This macro will be assigned to a button.
View 5 Replies View RelatedI am using excel 2000. I want to apply conditional formatting to a range of cells if they contain (V) as part of the cell contents. The cells will generally look like this : 09.00-6 (V) or 9-5.30 (V). I want to shade any cell if part of the contents of that cell is (V).
View 2 Replies View RelatedI would like to implement specific cell ranges from two specific worksheets each within 33 workbooks (which all have several tabs) into a summary page in a separate workbook.
The cell ranges are going across my spreadsheet in rows and I would like for them to transpose into a columns depending on the data which I have separated by catergory on the summary page. They are all on the same location in each workbook which is separated by country. The cell ranges are E26:P37 and I would like to transpose them and have them put below eachother without overwriting for my format on the summary page, how I can put this together in a macro?
Attached is my code, pay attention to the bold part. I want the sourceSheet to be copied as a sheet and pasted in the targetSheet (the Sheet2 of "NewBook") but I want it pasted asvalues. Here is the specific part which needs to be looked at...and below is the full code.
VB:
Set sourceBook = Application.Workbooks.Open(sourceFilename)
Set sourceSheet = sourceBook.Sheets("Current")
Set targetSheet = NewBook.Sheets("Sheet2")
[Code].....
copy/paste Every Sheet Single ( P Column ) and Paste to Notepad and take P1 As file name for note pad.
View 1 Replies View RelatedI am having some trouble with a piece of code that is part of a larger macro. I have a list of data and I need to copy and paste the rows of data in which the values in column B are the same and then delete these rows from the original sheet. The code that i have come up with so far is as follows:
Sub Retreive_Particular_Rep_Invoices()
Dim RepInvoices As Long
Sheets("All Invoices").Activate
Worksheets("Current AM Invoices"). Range("A2:T65536").ClearContents
With ActiveSheet
For RepInvoices = 1 To .Range("B1").End(xlDown).Row
If .Cells(RepInvoices, 2).Value = .Cells(RepInvoices + 1, 2).Value Then
.Cells(RepInvoices, 2).EntireRow.Copy Destination:=Worksheets("Current AM Invoices").Range("A65536").End(xlUp).Offset(1, 0)
End If
Next RepInvoices
End With
End Sub
I know that this is not correct, but it's the best i have been able to come up with so far and thought that i would try and speed it up. I have also attached a spreadsheet with some basic data that i have been playing with as well.
List Sheet Names From Opened Workbooks
View 7 Replies View RelatedI am trying to figure out how to copy and paste conditional formatting.
1371908# on hand 16458
ACNF18051 208
ACNF18061 104
ACNF30081 208
1371908 Total416104
1371911# on hand 7053
ACNF18051 208
ACNF18061 104
ACNF30081 208
1371911 Total416104
for instance in the above.. I want to black out any number in the "total" (bold) row that is less than the On Hand Qty (bold and underlined number) and I want to use a running total. For instance for part 1371911 with an On Hand Qty of 7053, the on hand is larger than the the first total of 416 so 416 should be blacked out, it is also larger than 416+104 so 104 should be blacked out as well.
This will continue until the on hand qty is less than the running total. I can conditionally format this one at a time and it could take forever as there are 3000+ lines of spreadsheet. If there is any way that you can tell me how to set the condtional format for one row and then cpy and paste it thoughout the sheet where needed.