Copy Rows Into Appropriate Worksheets Meeting Criteria

Mar 12, 2009

I have a worksheet that contains 2 Rn managers per 3 Site and 2 TSR managers per 3 Site.
I want to be able to sort these managers by Site into 6 tabs: 3 RN tabs and 3 TSR tabs.
I want to keep the original worksheet as is and copy the appropriate rows to the designated worksheets labeled SACRN SACTSR VALRN VALTSR and so on. The data range is A:M

The columns of value is A (JOB) and B (SITE) and here is the sample of the data

JOB SITE TEAM
RN SITE SAC GASTON SUSAN TEAM SAC BERNAL
RN SITE SAC GASTON SUSAN TEAM SAC CASTILLO
RN SITE SAC GASTON SUSAN TEAM SAC CASTILLO
RN SITE VAL RANADA TERESA TEAM VAL RINCON
RN SITE VAL RANADA TERESA TEAM VAL RINCON
RN SITE VAL RANADA TERESA TEAM VAL RINCON
RN SITE SAC MCINNIS JOHN TEAM SAC SMITH
RN SITE SAC MCINNIS JOHN TEAM SAC LEMON
RN SITE SAC MCINNIS JOHN TEAM SAC JACK
TSR SITE SAC GRECO DAVE M TEAM SAC KEN
TSR SITE SAC GRECO DAVE M TEAM SAC ROGERS
TSR SITE SAC GRECO DAVE M TEAM SAC LOPEZ
TSR SITE SAC SHAVER KELLY TEAM SAC JONES
TSR SITE VAL FRANCIS TEAM SAC YANG

View 9 Replies


ADVERTISEMENT

Hide Rows On All Worksheets Meeting Criteria

Aug 7, 2007

I have the following code that works well on a single worksheet

Sub hide()
For Each rw In ActiveSheet.UsedRange.Rows
If rw. Cells(3) = 0 And rw.Cells(5) = 0 And rw.Cells(6) = 0 Then rw.Hidden = True
Next rw
End Sub

However I want it to run on each worksheet in the workbook when I run the macro. I tried this but it seems to loop continuously on the first worksheet. When I press escape the line "next row" is highlighted in yellow by the debug in the VBA Editor.

Sub hide()
Dim ws As Worksheet
Dim rw
For Each ws In ThisWorkbook.Worksheets

For Each rw In ActiveSheet.UsedRange.Rows

If rw.Cells(3) = 0 And rw.Cells(5) = 0 And rw.Cells(6) = 0 Then rw.Hidden = True
Next rw

'Next ws
End Sub

View 6 Replies View Related

Copy/Paste Rows Into New Sheet Meeting Criteria

Jun 19, 2008

1) I have a original worhsheet_A which with header rows(1~6) and many columns.
2) In the sheet_A, there are 2 columns (ColumnN & S) which I need to set criteria (value>5).
3) If any row's data which meet the criteria (value >5) with either column N or S, copy all the entired rows to sheet_B following sheet_A sequence.
4) The sheet_B should have the same header row with sheet_A(row1~6).

Btw, is possible create a corn job trigger this macro to run daily 9am to send out the worksheet_B as email, so that the command button can be disregarded.

View 4 Replies View Related

Copy Rows Meeting Multiple Criteria On Multiple Columns

Dec 18, 2006

1. Copy data from original file (I do not want to do anything in the original file) into the spreadsheet (Target worksheet)where the code should run.
2. In sheet 1 of Target Worksheet, there are 2 columns which I need to set criterias on namely Column D and Column L
3. In Column D, I want to specify 3 criterias namely A, B and C
4. In Column L, I want to specify 5 criterias namely London, Frankfurt, New York, Sydney and Tokyo
5. If Criterias in 3 and 4 are met, copy all rows into Sheet 2 of Target Worksheet

View 9 Replies View Related

Copy Rows From All Worksheets In Workbook That Meet 2 Criteria

Jun 28, 2014

I have a workbook with many (25) worksheets which all have the same structure, column headings, etc. but vary as to the number of rows. I would like to search all worksheets in workbook and copy to worksheet "120" only those rows where column C is "120" and column E is "1-00053-".

Ideally, input boxes would be used to enter these criteria so that it can be used for different scenarios in which these values will vary.

View 1 Replies View Related

Copy Rows From Multiple Worksheets To New Condition Based On Criteria

Nov 20, 2012

I have multiple sheets with the same format.(all columns have same format) in column "A" i have a value lets say "B1-1".

What I need to do is to copy from all sheets the rows containing in column "A" the same criteria("B1-1") to a new sheet and skip the rows that have a blank cell in Column "A".

View 5 Replies View Related

Remove Rows Not Meeting Criteria

Nov 30, 2006

I am trying to delete rows - based on 1 field in each row not being equal to ANY of the values stored in an Array. e.g. my array has 3 values, CAT,DOG,MOUSE

cells are:
A1 = CAT
A2 = HORSE
A3 = DOG
A4 = DOG
A5 = BIRD

i want to delete rows not containing CAT,DOG,MOUSE. I think the autofilter could be the trick but cant quite get my head around it.

View 5 Replies View Related

Hide Rows Meeting Criteria

Sep 3, 2007

Searching through hide/unhide topics seem to yield more complicated codes then my meager needs. Within my worksheet I have a column BD which contains a list of values,

ie:

BD
1
2
3
6
3
2
1 etc..

I've created a toggle button "HideRow", which I would like to use to hide/unide only the rows containing value "2" within column BD.

View 2 Replies View Related

Copy Values Meeting A Criteria

Sep 28, 2006

im trying to set my workbook up so that it is updating itself daily. Currently it has about 4000 rows of invoices from multiple departments. What I want is a formula that when an invoice reaches 31 days that it goes to a separate worksheet. I don't want it deleted, I just want it to be moved in to a worksheet called 'WatchList'.

Any body know how this can be done. What Ive done right now only puts the row in the same row from the main sheet. So if row 2000 reaches 31, it shows up on row 2000 in 'WatchList'. Im wondering how I can move row 2000 to the top and whatever other row to the top once it reaches 31.

View 4 Replies View Related

Delete Rows Meeting Criteria In One Column

Jun 4, 2009

I have a large number of user inputs which is linked to a data sheet. In this sheet are rows to be kept and rows to be deleted. See attached example...

I need code to delete all other similar rows than the one with a number (1) in the field Complete. There can only be a number (1) in the field Complete in one of the rows.

But if there is no number (1) in the field Complete in any of the rows, no rows should be deleted.

The data sheet is to be transferred to Access afterwards.

View 3 Replies View Related

Delete Rows Meeting Criteria In Different Workbook

Feb 2, 2010

Broken off from:Delete Rows Meeting Criteria

Thats for that, the sheet in the workbook is called Ticket Handling and if i try to change the name in the VBA code it will not accept this.

It Displays the following error:

Compile Error:

Expected: End of Statment

View 8 Replies View Related

Clear Rows Meeting Multiple Criteria

Dec 13, 2006

In my code I am searching a spreadsheet for certain states and deleting rows that have states I want to exclude. Is there a way to do this with a list of states, instead of having to make many for loops?

For i = lastrow To 2 Step -1
Cells(i, 4).Select
If Cells(i, 4).Value = "PA" Then
Rows(i).Select
Selection.ClearContents
End If
On Error Resume Next
Next
For i = lastrow To 2 Step -1
Cells(i, 4).Select
If Cells(i, 4).Value = "TX" Then
Rows(i).Select
Selection.ClearContents
End If
On Error Resume Next
Next

View 5 Replies View Related

Delete Rows Meeting User Criteria

Aug 20, 2007

I need a macro to sort through a large table of data entries and remove all repetitive entries (entires are based on a number in column A with data entries in B through EY) so i need to locate repetive numbers select entire row and paste them in a new location.

But i cant sort the data as it will change the entire order and i need the data intact.
the user will specify which entry number to search for.

I know some sort of search and loop function would work but i just cant seem to make them work.

View 9 Replies View Related

Automatically Unhide Rows Meeting Criteria

Sep 29, 2007

I'm trying to make my spreadsheet to show next hidden row by entering a text or number on the cells in the range of my code. It works from rows 67 to 135 but I canot make it work with an additional ranges on it. if i insert the same instruction 'Private Sub Worksheet_SelectionChange(ByVal Target As Range)' it shows an error that said ambiguos name detected.?

Private Sub Worksheet_SelectionChange(ByVal Target As Range)
If RenglonAnt > 67 And RenglonAnt < 135 Then
If Range("C" & RenglonAnt).Value <> "" Then
Sheet1.Rows(RenglonAnt + 1).Hidden = False

End If
End If
If Target.Row > 67 And Target.Row < 135 Then
RenglonAnt = Target.Row

Else......................

View 2 Replies View Related

Delete Entire Rows Not Meeting Criteria

Nov 21, 2007

Excel Range A1 - D500. Data located in column C. I would like to delete the rows in this spread sheet that do not contain any of the following 3 prefixes of part numbers from column C: X-SXP, X-SCM and X-SBP. There are many part numbers but only parts with these 3 prefixes are needed. Part numbers are 10 characters long after the prefix. If any additional information is needed, let me know.

I viewed the Delete Rows Meeting Conditions thread, but the input value in that code is for what you want to delete, and I need to delete everything not meeting the data I want to keep, which is about 30 different part numbers. Also, that appeared to only offer one input and not 3.

View 3 Replies View Related

Delete Rows Not Meeting Multiple Criteria

Feb 29, 2008

I have an extremely large CSV file that I am opening via Excel. Can anyone tell me how to delete a row using multiple criteria. For Example, i want to delete the whole row if a certain cell doesnt equal GA SC or NC. I have seen how it can be done using one criteria but not multiple ones.

View 8 Replies View Related

Hide Rows Meeting Date Criteria

Apr 4, 2008

I have a macro that hides rows in my workbook if certain criterias are met. I'd like to add a criteria to the logic that only hides rows if the date in cell 17 is less than 3 months from today's date. The date in cell 17 is shown in this format: 25-03-2008.

Sub ForceHide()
Dim ws As Worksheet
Dim line As Integer
Dim Endline As Long
For Each ws In Worksheets
If ws.Name <> " Total" And ws.Name <> "Batch" And ws.Name <> "Summary" And ws.Name <> "PivotTable" And ws.Name <> "Fields" And ws.Name <> "RTP" Then
With ws........................

View 3 Replies View Related

Delete Rows Meeting Criteria In A Column

Aug 11, 2008

I have searched for this topic, and I have read http://www.ozgrid.com/VBA/row-delete-criteria.htm, I don't really understand it though. I think what I want is simple, I want to search column A for cells containing the word " Total" - if any are found I then want to delete the corresponding rows.

View 2 Replies View Related

Copy Cells Meeting Conditions Or Criteria

May 7, 2007

We are trying to list only certain cells that have a specific conditional format- this is so we can copy them to another sheet
A filter does not really work for us since we have over 5 columns to search on and over 800 records

This is how excel says to find cells that have a conditional formatting (for example the scores are red because the student scored between 350 and 370: I tried it and it doesn't work--but maybe that is not how it is suppose to work?


To find cells that have conditional formatting settings identical to the settings of a specific cell, click the specific cell.
On the Edit menu, click Go To.
Click Special.
Click Conditional formats.
Do one of the following:
To find cells with any conditional formatting, click All below Data validation.
To find cells with identical conditional formats, click Same below Data validation.

View 4 Replies View Related

Copy Data Meeting Criteria To Another Worksheet

Sep 26, 2007

I have eight locations that appear on a single spreadsheet/Text file. I need to separate based on the Property ID for each location and then paste the result into a separate sheet for each one. I have arrange the code to look for each property ID and then copy the found data, but I am having a problem. The first find and Copy drops the first row but adds two to the end, so I am getting data for the next company. The second problem is that the second set of found data is appended to the size of the first found set. ( The first set is 3,570 rows, the second set is 2,646 rows. When Resized 6,216 rows are copied ) I can't seem to figure out how to reset the found range.

Sub Test()
Dim RngSize As Long
Dim srtHere As Long
Dim endHere As Long
'Find The First company
RngSize = Cells.Find("337x2", [B1], , , xlByRows, xlPrevious).Row
'Select columns to copy by resizing the found area to include additional Columns
Set b = Range("Test").Find(what:="337X2").Resize(RngSize, 9)
'Copy Found area to the destination........................

View 6 Replies View Related

Copy Cells Meeting Criteria To Another Sheet

Dec 21, 2007

i want to copy one coulmn from one sheet to another if cells in another column satisfy a criteria.

View 3 Replies View Related

Highlight Rows Meeting Multiple Column Criteria

Apr 17, 2008

I have a large file of invoices, and some have been paid. The problem is, sometimes it is not paid against the correct invoice, so I have a lot of credit and debit that should offset each other. I want to go through the sheet and highlight all the rows that has a matching ID and an a 0 value when total amount column was added up to another row. I would like it so that it highlights a different color for every pair of offsetting amount, but the same color highlight is fine too.

View 2 Replies View Related

Copy Rows Meeting A Condition But Not Duplicate

Jan 16, 2009

I got this code form Ozgrid that works great other than everytime I run the macro it copies everything over again.

View 3 Replies View Related

Copy Rows Of Column Meeting Certain Condition

Jun 6, 2008

I Have workbook-1 with 5 cells and 10 rows and in 5 th (E) cell i have value of 1 or 0 .

i want to selectively copy entire rows which has value = 1 in cell(E) and paste these rows into 2 nd row(A2 cell) of workbook-2 using Macro

View 5 Replies View Related

Count Rows Meeting Multiple Criteria Of Multiple Values

Aug 10, 2009

I am trying to find a formula to count rows that meet multiple criteria, but one of the criteria can be multiple values. I have a list of people with a list of clients that they are responsible for. Each person is responsible for 10-20 clients. Every day I run a report that shows the project worksheets submitted for each client and if money has been awarded or not.

I'm wondering if there is a way to count, for each person, the number of project worksheets that show "awarded" in column K. That would mean that I would have to look for, for each person, any of their multiple clients in column B and "awarded" in column K.

I am trying to put the formula in D2:D9, as I use A2:D9 for a chart. O1:P79 contain the names of the people and the applicants that they are responsible for. A17:D158 contains the list of project worksheets (updated daily). I used =SUMPRODUCT(COUNTIF(B17:B999,P1:P14)) to count the actual number of project worksheets for each person, but I can't figure out a way to modify that to add in the "awarded" criteria also.

View 2 Replies View Related

Copy Between Worksheets Based On Criteria

Oct 26, 2006

I need to assign to variable the number of cells in axle "Y", I explain them, I have assigned to the variable "Celda" the number "4" that, celda = 4 where 4 is the number of cells where begin the information that i need to copy,at firts they were separated sheets, and the macro it was working, assigning a letter a the processed row in the column of the left, but now is a one sheet, and I need, this macro find the last cells that the contain a letter in the left and assign the number of cells to the variable "celda" dont the range for example "A33" else "33" and begin toward down, I have this

Workbooks(origen).Activate
Application.ScreenUpdating = False
celda = 4 'where the number 4 will be changed for the number of cells in axle "Y" in this case "33"
celda2 = 4
cdestino = 1
While Workbooks(origen).Worksheets(1).Cells(celda, 2).Value <> ""
dato = Cells(celda, 2).Value
Select Case dato
Case "Aplicación de material"............

View 2 Replies View Related

Copy Data Across Multiple Worksheets (based On Three Criteria)

Feb 16, 2010

I have data on a worksheet (“Interface”) that I need to copy over 7 other tabs for analysis.

("Module_1", "Module_2", "Module_3", "Module_4", "Module_5", "Module_6", "Module_7").

The linking Field on the Interface tab defines what row I need to paste the data to on Module 1-7. The column headers are the same on both the interface and other tabs (“YES, NO, N/A, BLANKS, STANDARDS MET, STANDARDS NOT MET, NOT APPLICABLE”)

The tab is selected based on the row
Module 1Medication Management
Module 2Privacy
Module 3Process
Module 4Patient Safety
Module 5Medical Records
Module 6Infection Control
Module 7Environment of Care

I’m trying to modify code written for a similar purpose with no luck. This is the code I'm trying to modify. I know I'm not on the right track yet.

View 2 Replies View Related

Sumproduct Meeting Two Criteria?

Jun 20, 2014

I'm working on a spreadsheet at work and I'm trying to sum only the values in a column that meet criteria in the column next to it. For example, in the attached spreadsheet, I would like to have a totals line at the bottom of the spreadsheet for all three Facilities and the total next to them. I know I could do a pivot table but I know this approach would be more aesthetic and easier for my supervisor.

View 3 Replies View Related

How To Add Cells Meeting A Criteria

Nov 12, 2012

I'm doing an assignment. This would be very simple w/ filters but I have to do it thru formulas.

I have a bunch of rows w/ various hotels. Row 14 is Rolling Meadows, Row 15 is Lakeview Apartments etc.

Near the top I have to add the number of times Rolling Meadows is mentioned, in the cell below Lakeview apartments, etc.

I tried a sumif formula but that doesnt work. How would you do this? This is what I wrote, I got 0

=SUMIF(B14:B26,"Rolling Meadows")

That's part 1. In part 2 I have to calculate the number of units in that building that are occupied.

View 9 Replies View Related

Return Value After Meeting Criteria

Mar 26, 2013

we would like to get results from a formula that looks at several cells and provides the cost for a product.

Example

If we choose
Cell A3=Transport (from drop down list)
Cell A4=Entrance Facility (from drop down list)
Cell A5=Bandwidth (from another drop down list)
returns the cost for this product in cell A6

We would also like to restrict the lists to the different catergories: if transport is selected you only have the option of 2 of 5 facility types that will work with transport products. Do I need to separate my lists?

View 1 Replies View Related







Copyrights 2005-15 www.BigResource.com, All rights reserved