I am trying to delete rows - based on 1 field in each row not being equal to ANY of the values stored in an Array. e.g. my array has 3 values, CAT,DOG,MOUSE
cells are:
A1 = CAT
A2 = HORSE
A3 = DOG
A4 = DOG
A5 = BIRD
i want to delete rows not containing CAT,DOG,MOUSE. I think the autofilter could be the trick but cant quite get my head around it.
Searching through hide/unhide topics seem to yield more complicated codes then my meager needs. Within my worksheet I have a column BD which contains a list of values,
ie:
BD
1
2
3
6
3
2
1 etc..
I've created a toggle button "HideRow", which I would like to use to hide/unide only the rows containing value "2" within column BD.
I have a worksheet that contains 2 Rn managers per 3 Site and 2 TSR managers per 3 Site.
I want to be able to sort these managers by Site into 6 tabs: 3 RN tabs and 3 TSR tabs.
I want to keep the original worksheet as is and copy the appropriate rows to the designated worksheets labeled SACRN SACTSR VALRN VALTSR and so on. The data range is A:M
The columns of value is A (JOB) and B (SITE) and here is the sample of the data
JOB SITE TEAM
RN SITE SAC GASTON SUSAN TEAM SAC BERNAL
RN SITE SAC GASTON SUSAN TEAM SAC CASTILLO
RN SITE SAC GASTON SUSAN TEAM SAC CASTILLO
RN SITE VAL RANADA TERESA TEAM VAL RINCON
RN SITE VAL RANADA TERESA TEAM VAL RINCON
RN SITE VAL RANADA TERESA TEAM VAL RINCON
RN SITE SAC MCINNIS JOHN TEAM SAC SMITH
RN SITE SAC MCINNIS JOHN TEAM SAC LEMON
RN SITE SAC MCINNIS JOHN TEAM SAC JACK
TSR SITE SAC GRECO DAVE M TEAM SAC KEN
TSR SITE SAC GRECO DAVE M TEAM SAC ROGERS
TSR SITE SAC GRECO DAVE M TEAM SAC LOPEZ
TSR SITE SAC SHAVER KELLY TEAM SAC JONES
TSR SITE VAL FRANCIS TEAM SAC YANG
I have a large number of user inputs which is linked to a data sheet. In this sheet are rows to be kept and rows to be deleted. See attached example...
I need code to delete all other similar rows than the one with a number (1) in the field Complete. There can only be a number (1) in the field Complete in one of the rows.
But if there is no number (1) in the field Complete in any of the rows, no rows should be deleted.
The data sheet is to be transferred to Access afterwards.
Broken off from:Delete Rows Meeting Criteria
Thats for that, the sheet in the workbook is called Ticket Handling and if i try to change the name in the VBA code it will not accept this.
It Displays the following error:
Compile Error:
Expected: End of Statment
In my code I am searching a spreadsheet for certain states and deleting rows that have states I want to exclude. Is there a way to do this with a list of states, instead of having to make many for loops?
For i = lastrow To 2 Step -1
Cells(i, 4).Select
If Cells(i, 4).Value = "PA" Then
Rows(i).Select
Selection.ClearContents
End If
On Error Resume Next
Next
For i = lastrow To 2 Step -1
Cells(i, 4).Select
If Cells(i, 4).Value = "TX" Then
Rows(i).Select
Selection.ClearContents
End If
On Error Resume Next
Next
I have the following code that works well on a single worksheet
Sub hide()
For Each rw In ActiveSheet.UsedRange.Rows
If rw. Cells(3) = 0 And rw.Cells(5) = 0 And rw.Cells(6) = 0 Then rw.Hidden = True
Next rw
End Sub
However I want it to run on each worksheet in the workbook when I run the macro. I tried this but it seems to loop continuously on the first worksheet. When I press escape the line "next row" is highlighted in yellow by the debug in the VBA Editor.
Sub hide()
Dim ws As Worksheet
Dim rw
For Each ws In ThisWorkbook.Worksheets
For Each rw In ActiveSheet.UsedRange.Rows
If rw.Cells(3) = 0 And rw.Cells(5) = 0 And rw.Cells(6) = 0 Then rw.Hidden = True
Next rw
'Next ws
End Sub
I need a macro to sort through a large table of data entries and remove all repetitive entries (entires are based on a number in column A with data entries in B through EY) so i need to locate repetive numbers select entire row and paste them in a new location.
But i cant sort the data as it will change the entire order and i need the data intact.
the user will specify which entry number to search for.
I know some sort of search and loop function would work but i just cant seem to make them work.
I'm trying to make my spreadsheet to show next hidden row by entering a text or number on the cells in the range of my code. It works from rows 67 to 135 but I canot make it work with an additional ranges on it. if i insert the same instruction 'Private Sub Worksheet_SelectionChange(ByVal Target As Range)' it shows an error that said ambiguos name detected.?
Private Sub Worksheet_SelectionChange(ByVal Target As Range)
If RenglonAnt > 67 And RenglonAnt < 135 Then
If Range("C" & RenglonAnt).Value <> "" Then
Sheet1.Rows(RenglonAnt + 1).Hidden = False
End If
End If
If Target.Row > 67 And Target.Row < 135 Then
RenglonAnt = Target.Row
Else......................
Excel Range A1 - D500. Data located in column C. I would like to delete the rows in this spread sheet that do not contain any of the following 3 prefixes of part numbers from column C: X-SXP, X-SCM and X-SBP. There are many part numbers but only parts with these 3 prefixes are needed. Part numbers are 10 characters long after the prefix. If any additional information is needed, let me know.
I viewed the Delete Rows Meeting Conditions thread, but the input value in that code is for what you want to delete, and I need to delete everything not meeting the data I want to keep, which is about 30 different part numbers. Also, that appeared to only offer one input and not 3.
I have an extremely large CSV file that I am opening via Excel. Can anyone tell me how to delete a row using multiple criteria. For Example, i want to delete the whole row if a certain cell doesnt equal GA SC or NC. I have seen how it can be done using one criteria but not multiple ones.
View 8 Replies View RelatedI have a macro that hides rows in my workbook if certain criterias are met. I'd like to add a criteria to the logic that only hides rows if the date in cell 17 is less than 3 months from today's date. The date in cell 17 is shown in this format: 25-03-2008.
Sub ForceHide()
Dim ws As Worksheet
Dim line As Integer
Dim Endline As Long
For Each ws In Worksheets
If ws.Name <> " Total" And ws.Name <> "Batch" And ws.Name <> "Summary" And ws.Name <> "PivotTable" And ws.Name <> "Fields" And ws.Name <> "RTP" Then
With ws........................
I have searched for this topic, and I have read http://www.ozgrid.com/VBA/row-delete-criteria.htm, I don't really understand it though. I think what I want is simple, I want to search column A for cells containing the word " Total" - if any are found I then want to delete the corresponding rows.
View 2 Replies View RelatedI have a large file of invoices, and some have been paid. The problem is, sometimes it is not paid against the correct invoice, so I have a lot of credit and debit that should offset each other. I want to go through the sheet and highlight all the rows that has a matching ID and an a 0 value when total amount column was added up to another row. I would like it so that it highlights a different color for every pair of offsetting amount, but the same color highlight is fine too.
View 2 Replies View Related1) I have a original worhsheet_A which with header rows(1~6) and many columns.
2) In the sheet_A, there are 2 columns (ColumnN & S) which I need to set criteria (value>5).
3) If any row's data which meet the criteria (value >5) with either column N or S, copy all the entired rows to sheet_B following sheet_A sequence.
4) The sheet_B should have the same header row with sheet_A(row1~6).
Btw, is possible create a corn job trigger this macro to run daily 9am to send out the worksheet_B as email, so that the command button can be disregarded.
I am trying to find a formula to count rows that meet multiple criteria, but one of the criteria can be multiple values. I have a list of people with a list of clients that they are responsible for. Each person is responsible for 10-20 clients. Every day I run a report that shows the project worksheets submitted for each client and if money has been awarded or not.
I'm wondering if there is a way to count, for each person, the number of project worksheets that show "awarded" in column K. That would mean that I would have to look for, for each person, any of their multiple clients in column B and "awarded" in column K.
I am trying to put the formula in D2:D9, as I use A2:D9 for a chart. O1:P79 contain the names of the people and the applicants that they are responsible for. A17:D158 contains the list of project worksheets (updated daily). I used =SUMPRODUCT(COUNTIF(B17:B999,P1:P14)) to count the actual number of project worksheets for each person, but I can't figure out a way to modify that to add in the "awarded" criteria also.
1. Copy data from original file (I do not want to do anything in the original file) into the spreadsheet (Target worksheet)where the code should run.
2. In sheet 1 of Target Worksheet, there are 2 columns which I need to set criterias on namely Column D and Column L
3. In Column D, I want to specify 3 criterias namely A, B and C
4. In Column L, I want to specify 5 criterias namely London, Frankfurt, New York, Sydney and Tokyo
5. If Criterias in 3 and 4 are met, copy all rows into Sheet 2 of Target Worksheet
I'm working on a spreadsheet at work and I'm trying to sum only the values in a column that meet criteria in the column next to it. For example, in the attached spreadsheet, I would like to have a totals line at the bottom of the spreadsheet for all three Facilities and the total next to them. I know I could do a pivot table but I know this approach would be more aesthetic and easier for my supervisor.
View 3 Replies View RelatedI'm doing an assignment. This would be very simple w/ filters but I have to do it thru formulas.
I have a bunch of rows w/ various hotels. Row 14 is Rolling Meadows, Row 15 is Lakeview Apartments etc.
Near the top I have to add the number of times Rolling Meadows is mentioned, in the cell below Lakeview apartments, etc.
I tried a sumif formula but that doesnt work. How would you do this? This is what I wrote, I got 0
=SUMIF(B14:B26,"Rolling Meadows")
That's part 1. In part 2 I have to calculate the number of units in that building that are occupied.
we would like to get results from a formula that looks at several cells and provides the cost for a product.
Example
If we choose
Cell A3=Transport (from drop down list)
Cell A4=Entrance Facility (from drop down list)
Cell A5=Bandwidth (from another drop down list)
returns the cost for this product in cell A6
We would also like to restrict the lists to the different catergories: if transport is selected you only have the option of 2 of 5 facility types that will work with transport products. Do I need to separate my lists?
I need to get the sum of a column where two conditions have to be met. I have tried doing something like: Sum(Sum(AND(V1:V1500="BEBLT", H1:H1500=17) +-Sum(AND(V514:V1512= "NVLIV", H514:H1512=17)))
In a nutshell I want to find the difference between the sum of a column whose criteria is 17 and BEBLT and the sum of another column whose criteria is 17 and NVLIV. This has been extremely frustrating since I am using SQL commands to pull the info from the workbook. Typically I would use
"Select SUM(Z) from Sheet1$ WHERE (H1:H1500=17 AND V1:V1500);"
Unfortunately for me my SQL command brings back an error so I must resort to finding the total in excel and then using the command to bring it into my VBA.
I'm trying to use the SUmif with Offset, but the width argument of offset doesn't
seem to work within the SumIf function. I have 14 columns
A Employee
B department
C-N jan through dec salaries per employee per month
41 rows
1 titles
2-41 names of employees
now in May I want to know the salaries per department for the month may only, but also cummulative from jan up to may. Getting may per department works fine, but getting the cummulative doesn't seem to be working
=SumIf(B2:B40;"account";offset(C2;;4)) gives me the sum of department
Account in the month of May
=SumIf(B2:B40;"account";offset(C2;;;;4)) starting point zero (= january) plus 4
columns width, just gives me January.
I've tried several options, but every time he only sums 1 column. Without the SumIf it works fine but for the whole company, not per department ofcourse.
how a SUMPRODUCT function can resolve this. In this sample I want to have 1120-32188 & 1120-32188W be treated the same for the Total sum qty. In this case =10.
This will compute but how do I include items in column A that have 'W' suffixes for computing Total Qty? Formula: =IF(A2=A1,"",SUMPRODUCT(($A$2:$A$100=A2)*($C$2:$C$100)))
I have an Excel sheet with 3 worksheets. On the first sheet I want to enter a formula that will check the third sheet. On the third sheet I need to compare all the entries in column N with a value in Cell B2 of the front sheet. If these match then I need the formula to add up the relevant values in column N. (column N has a 4 letter code, I am only interested in comparing the first letter, as such the value in cell B2 is H*, then in column U it has numbers of minutes, I want a total of the minutes of all those entries with a code that begins with H)
View 4 Replies View RelatedWhat I have is 4 columns of data broken down as follows Column A = Date Range B = Name C = City D = Amount of People.
What I want to achieve is to be able to go through my list of data and for all rows that match specifically matches A,B,C it will total column D and output to a cell. I also need for it to reflect the name somehow .. so in attached example A2-C2 matches A8-C8 so I would need the output of D8 + A8 (which should be 54) but I need for this to some how reflect a name combination City + Name. So I would know that abc & California have 54 people and that def and New York have 56.
I have attached a basic spread sheet of data; keeping in mind that in the complete data there could be hundreds of combinations for data to be matched.
On the attached file, I would like the values from the Transactions worksheet to show up in the appropriate cells in the XYZ Expenses worksheet. The catch is, I would like the XYZ Expenses worksheet to only show the values from the past week. Past week could be literally, but I'm guessing that might not be possible and it would have to use the past week from the most recent transaction date - which would be fine. So if it worked right, XYZ Expenses > F7 would show -$80, which would be from Transactions H3+H6 (and not -$130, from Transactions H3+H6+H9).
View 3 Replies View RelatedProblem:
Range A2:C10 contains the login and logout times of various ID's.
Each ID could log in and out a number of times a day.
How could we find the first time a specific ID logged in and the last time that same ID logged out?
Solution:
For each of the ID's in range A2:A10, enter two Array Formulas.
To find the first login time (Column B) enter the following formula:
{=1/MAX((A14=$A$2:$A$10)*($B$2:$B$10
To find the last logout time (Column C) enter the following formula:
{=MAX(($A$2:$A$10=A14)*($C$2:$C$10))}
ID______Login Time______Logout Time
1 ______02:40___________03:10
2 ______00:15___________03:20
1 ______06:20___________09:30
3 ______09:14___________11:05
4 ______11:00___________19:30
2 ______04:05___________06:55
3 ______12:08___________17:17
1 ______10:00___________16:20
2 ______08:12___________12:33
ID______First Login Time______Last Logout Time
1 ______2:40__________________16:20
2 ______0:15__________________12:33
3 ______9:14__________________17:17
4 ______11:00_________________19:30
I can get the result. It shows #num! in cell F2
A column W5:W9999 contains attendance from either of 0, 1, ........31 of employees.
How to count no of employees meeting certain criteria like:
Total no. of emp with values >0.
Total no. of emp with values >0 but < 16.
I have been having problems all morning and have not been able to solve it!
I am sure this is very simple....
What I would like to do is assign the result of a sum to a variable. This part is easy what I cannot fathom or find any help with is the multipule criteria bit!
Here is the detail.
Column A - Employee Number
Column C - Area
Column F - Type
Column D - Amount paid.
I would like to sum the amount paid based on the 3 criteria, Employee Number, area & type and assign this to a variable to be used later in a sub I'm playing with.