I have the following code that works well on a single worksheet
Sub hide()
For Each rw In ActiveSheet.UsedRange.Rows
If rw. Cells(3) = 0 And rw.Cells(5) = 0 And rw.Cells(6) = 0 Then rw.Hidden = True
Next rw
End Sub
However I want it to run on each worksheet in the workbook when I run the macro. I tried this but it seems to loop continuously on the first worksheet. When I press escape the line "next row" is highlighted in yellow by the debug in the VBA Editor.
Sub hide()
Dim ws As Worksheet
Dim rw
For Each ws In ThisWorkbook.Worksheets
For Each rw In ActiveSheet.UsedRange.Rows
If rw.Cells(3) = 0 And rw.Cells(5) = 0 And rw.Cells(6) = 0 Then rw.Hidden = True
Next rw
Searching through hide/unhide topics seem to yield more complicated codes then my meager needs. Within my worksheet I have a column BD which contains a list of values,
ie:
BD 1 2 3 6 3 2 1 etc..
I've created a toggle button "HideRow", which I would like to use to hide/unide only the rows containing value "2" within column BD.
I have a macro that hides rows in my workbook if certain criterias are met. I'd like to add a criteria to the logic that only hides rows if the date in cell 17 is less than 3 months from today's date. The date in cell 17 is shown in this format: 25-03-2008.
Sub ForceHide() Dim ws As Worksheet Dim line As Integer Dim Endline As Long For Each ws In Worksheets If ws.Name <> " Total" And ws.Name <> "Batch" And ws.Name <> "Summary" And ws.Name <> "PivotTable" And ws.Name <> "Fields" And ws.Name <> "RTP" Then With ws........................
I have a worksheet that contains 2 Rn managers per 3 Site and 2 TSR managers per 3 Site. I want to be able to sort these managers by Site into 6 tabs: 3 RN tabs and 3 TSR tabs. I want to keep the original worksheet as is and copy the appropriate rows to the designated worksheets labeled SACRN SACTSR VALRN VALTSR and so on. The data range is A:M
The columns of value is A (JOB) and B (SITE) and here is the sample of the data
JOB SITE TEAM RN SITE SAC GASTON SUSAN TEAM SAC BERNAL RN SITE SAC GASTON SUSAN TEAM SAC CASTILLO RN SITE SAC GASTON SUSAN TEAM SAC CASTILLO RN SITE VAL RANADA TERESA TEAM VAL RINCON RN SITE VAL RANADA TERESA TEAM VAL RINCON RN SITE VAL RANADA TERESA TEAM VAL RINCON RN SITE SAC MCINNIS JOHN TEAM SAC SMITH RN SITE SAC MCINNIS JOHN TEAM SAC LEMON RN SITE SAC MCINNIS JOHN TEAM SAC JACK TSR SITE SAC GRECO DAVE M TEAM SAC KEN TSR SITE SAC GRECO DAVE M TEAM SAC ROGERS TSR SITE SAC GRECO DAVE M TEAM SAC LOPEZ TSR SITE SAC SHAVER KELLY TEAM SAC JONES TSR SITE VAL FRANCIS TEAM SAC YANG
In the included sheet I have 5 groups of data with five categories in column A. Current, Plan, Plan Var, Prior, Prior Var. I have included the button “Show Options” that opens the userform I created and gives 5 options. What I want is the user to be able to select any number of these options and then upon “ok” the rows in the sheet that weren’t selected are automatically hidden. If the procedure is completed again and a differen set of options is selected I want it to unhide any hidden ones that were selected and hide any that werent selected.
So if just current is selected the sheet will show 5 rows of current and nothing else. If current and prior are selected it will show current prior current prior current prior... etc.
I have some hide code that I created in the file as well.
I would like to setup a macro that brings up a dialog box asking for a date in a specific column. Once that date is entered in the dialog box, the macro would then find all rows before that date (in that specfic column) and delete them.
I am trying to delete rows - based on 1 field in each row not being equal to ANY of the values stored in an Array. e.g. my array has 3 values, CAT,DOG,MOUSE
cells are: A1 = CAT A2 = HORSE A3 = DOG A4 = DOG A5 = BIRD
i want to delete rows not containing CAT,DOG,MOUSE. I think the autofilter could be the trick but cant quite get my head around it.
I have a large number of user inputs which is linked to a data sheet. In this sheet are rows to be kept and rows to be deleted. See attached example...
I need code to delete all other similar rows than the one with a number (1) in the field Complete. There can only be a number (1) in the field Complete in one of the rows.
But if there is no number (1) in the field Complete in any of the rows, no rows should be deleted.
The data sheet is to be transferred to Access afterwards.
In my code I am searching a spreadsheet for certain states and deleting rows that have states I want to exclude. Is there a way to do this with a list of states, instead of having to make many for loops?
For i = lastrow To 2 Step -1 Cells(i, 4).Select If Cells(i, 4).Value = "PA" Then Rows(i).Select Selection.ClearContents End If On Error Resume Next Next For i = lastrow To 2 Step -1 Cells(i, 4).Select If Cells(i, 4).Value = "TX" Then Rows(i).Select Selection.ClearContents End If On Error Resume Next Next
I need a macro to sort through a large table of data entries and remove all repetitive entries (entires are based on a number in column A with data entries in B through EY) so i need to locate repetive numbers select entire row and paste them in a new location.
But i cant sort the data as it will change the entire order and i need the data intact. the user will specify which entry number to search for.
I know some sort of search and loop function would work but i just cant seem to make them work.
I'm trying to make my spreadsheet to show next hidden row by entering a text or number on the cells in the range of my code. It works from rows 67 to 135 but I canot make it work with an additional ranges on it. if i insert the same instruction 'Private Sub Worksheet_SelectionChange(ByVal Target As Range)' it shows an error that said ambiguos name detected.?
Private Sub Worksheet_SelectionChange(ByVal Target As Range) If RenglonAnt > 67 And RenglonAnt < 135 Then If Range("C" & RenglonAnt).Value <> "" Then Sheet1.Rows(RenglonAnt + 1).Hidden = False
End If End If If Target.Row > 67 And Target.Row < 135 Then RenglonAnt = Target.Row
Excel Range A1 - D500. Data located in column C. I would like to delete the rows in this spread sheet that do not contain any of the following 3 prefixes of part numbers from column C: X-SXP, X-SCM and X-SBP. There are many part numbers but only parts with these 3 prefixes are needed. Part numbers are 10 characters long after the prefix. If any additional information is needed, let me know.
I viewed the Delete Rows Meeting Conditions thread, but the input value in that code is for what you want to delete, and I need to delete everything not meeting the data I want to keep, which is about 30 different part numbers. Also, that appeared to only offer one input and not 3.
I have an extremely large CSV file that I am opening via Excel. Can anyone tell me how to delete a row using multiple criteria. For Example, i want to delete the whole row if a certain cell doesnt equal GA SC or NC. I have seen how it can be done using one criteria but not multiple ones.
I have searched for this topic, and I have read http://www.ozgrid.com/VBA/row-delete-criteria.htm, I don't really understand it though. I think what I want is simple, I want to search column A for cells containing the word " Total" - if any are found I then want to delete the corresponding rows.
I have a large file of invoices, and some have been paid. The problem is, sometimes it is not paid against the correct invoice, so I have a lot of credit and debit that should offset each other. I want to go through the sheet and highlight all the rows that has a matching ID and an a 0 value when total amount column was added up to another row. I would like it so that it highlights a different color for every pair of offsetting amount, but the same color highlight is fine too.
1) I have a original worhsheet_A which with header rows(1~6) and many columns. 2) In the sheet_A, there are 2 columns (ColumnN & S) which I need to set criteria (value>5). 3) If any row's data which meet the criteria (value >5) with either column N or S, copy all the entired rows to sheet_B following sheet_A sequence. 4) The sheet_B should have the same header row with sheet_A(row1~6).
Btw, is possible create a corn job trigger this macro to run daily 9am to send out the worksheet_B as email, so that the command button can be disregarded.
I am trying to find a formula to count rows that meet multiple criteria, but one of the criteria can be multiple values. I have a list of people with a list of clients that they are responsible for. Each person is responsible for 10-20 clients. Every day I run a report that shows the project worksheets submitted for each client and if money has been awarded or not.
I'm wondering if there is a way to count, for each person, the number of project worksheets that show "awarded" in column K. That would mean that I would have to look for, for each person, any of their multiple clients in column B and "awarded" in column K.
I am trying to put the formula in D2:D9, as I use A2:D9 for a chart. O1:P79 contain the names of the people and the applicants that they are responsible for. A17:D158 contains the list of project worksheets (updated daily). I used =SUMPRODUCT(COUNTIF(B17:B999,P1:P14)) to count the actual number of project worksheets for each person, but I can't figure out a way to modify that to add in the "awarded" criteria also.
1. Copy data from original file (I do not want to do anything in the original file) into the spreadsheet (Target worksheet)where the code should run. 2. In sheet 1 of Target Worksheet, there are 2 columns which I need to set criterias on namely Column D and Column L 3. In Column D, I want to specify 3 criterias namely A, B and C 4. In Column L, I want to specify 5 criterias namely London, Frankfurt, New York, Sydney and Tokyo 5. If Criterias in 3 and 4 are met, copy all rows into Sheet 2 of Target Worksheet
When I call a series of subroutines from different worksheets, ScreenUpdating = False is not working.Here is my
Private Sub Worksheet_Change(ByVal Target As Range) With Application .Calculation = xlManual .EnableEvents = False End With If ActiveCell = "No" Then Call Sheet3.DisableTBs Call Sheet4.DisableTBs Call Sheet5.DisableTBs Call Sheet6.DisableTBs Call Sheet8.DisableTBs Call Sheet9.DisableTBs Call Sheet10.DisableTBs......................
My company has a canned template for some of the work we do and to avoid wasting too much paper I wanted to insert some extra code into an already programmed macro button (which sets the page breaks) to hide forms (both as individual worksheets and rows within separate worksheets) if the field that ought to auto-fill them is left empty.
I have a workbook with over 70 tabs whose position shouldn't be changed. Some of these tabs are colored in yellow (sorting by tab color is not allowed). I need to select these yellow tabs first and loop through them (only yellow tabs) and hide empty rows in the range of A1: G 50 on each of them. Grouping sheets wwon't work because each tab has different last row with data within that range.
I have a code and it doesn't error out, but it won't hide the rows either. I'm pretty sure the red is what needs to be altered. I've tried adding "Selection.", "Rows." and "Cells." and none of them are working.
I would like to hide rows for data that does not meet specific criteria. For example: If a user selects room number 101 from a drop down in B1, I want to filter data in range A3:F1000 to show me only room 101 rows (A column) where C column contains a value larger than zero OR D column contains a value larger than zero OR E column contains a value larger than zero. I do not want it to return rows where 101 may be in other columns beside A.
Sample:
A B C D E F __________________________________ 1 ROOM: 101 2 3 4 101 XX 1.2 0 0 P 16 101 YA 0 0 1.1 L 23 101 JJ 3.2 2.1 0 L 55 101 JJ 0 0 1 P
So, if a row contains 101 in column A and all three values in columns C, D, and E equal 0, then those rows will be hidden.
I have a workbook with many (25) worksheets which all have the same structure, column headings, etc. but vary as to the number of rows. I would like to search all worksheets in workbook and copy to worksheet "120" only those rows where column C is "120" and column E is "1-00053-".
Ideally, input boxes would be used to enter these criteria so that it can be used for different scenarios in which these values will vary.
I have multiple sheets with the same format.(all columns have same format) in column "A" i have a value lets say "B1-1".
What I need to do is to copy from all sheets the rows containing in column "A" the same criteria("B1-1") to a new sheet and skip the rows that have a blank cell in Column "A".
I'm working on a spreadsheet at work and I'm trying to sum only the values in a column that meet criteria in the column next to it. For example, in the attached spreadsheet, I would like to have a totals line at the bottom of the spreadsheet for all three Facilities and the total next to them. I know I could do a pivot table but I know this approach would be more aesthetic and easier for my supervisor.
we would like to get results from a formula that looks at several cells and provides the cost for a product.
Example
If we choose Cell A3=Transport (from drop down list) Cell A4=Entrance Facility (from drop down list) Cell A5=Bandwidth (from another drop down list) returns the cost for this product in cell A6
We would also like to restrict the lists to the different catergories: if transport is selected you only have the option of 2 of 5 facility types that will work with transport products. Do I need to separate my lists?
