Use Range Variable To Copy Formula
Jul 6, 2007
I have below code (option 1) I was hoping would do what I need except instead of copying formula from A1 it copies values... (option 2) copies formula but does not preserve references...any ideas how to copy exact formula so that references are not changed?
Assumptions:
A1 formula = SUM(B2:E2)
in A5 I would like to copy exact formula to keep references to row 2...
I agree I could use $ in original formula but that would complicate other requirements.
OPTION1:________________
Sub test_var_object()
Dim vRange1 As Range
Set vRange1 = Range("A1")
Range("A5") = vRange1
End Sub
OPTION2:________________
Sub test_var_object()
Dim vRange1 As Range
Set vRange1 = Range("A1")
vRange1.Copy
Range("A5").PasteSpecial
End Sub
View 9 Replies
ADVERTISEMENT
Mar 2, 2008
I tried searching for code for each part of the task separately and trying to piece together multiple macros, that did something similar, but I’m not have a lot of luck, so I’ll break it down into two treads, I hope this will follow the rule of one question per post, but if I should have separated this request even farther as two treads, please let me know and I’ll be happy to comply.
I was given a spread sheet with a macro that loads data from a SQL Data base (not mine), it returns anywhere from one row to 100’s of rows data. Since it’s not my spread sheet and macro, I copied this sheet to my destination workbook. The Data loads in 7 columns starting in B4:H4, with the column headings titles: Acct#, Id#, Name, Qtr1 Totals, Qtr2 Totals, Qtr3 Totals, and Qtr4 Totals. Data cells in spreadsheet not formatted (general)
What I’m trying to do:
part 1:
I need a macro to copy the data only for columns Id# thru Qtr4 Totals (C5:H5 down thru the last row with data) to another sheet. The destination sheet range starts with rows B13:G13, with formulas below and to the right in columns H13, and J13:N13
(column I is blank).
The formulas below the range are a subtotal of the copied columns (D:G). They could be remove and totaled after they’re copied, so there's nothing below the copied range? Since I need the column totals as a subtotals, my thought was to have the row heading and formulas already on the destinations sheet and just insert a blank rows between as each row was copied?
part 2:
As each row of data is copied from the source sheet, I need the macro to copy the formulas to the right of the copied range (H13, and J13:N13) on the destination sheet down for each new row of data copied from the source sheet
View 10 Replies
View Related
Jul 16, 2009
I am using the code below to copy a range and paste it over a variable range.
View 4 Replies
View Related
Aug 8, 2006
A text file is imported to Excel Worksheet. I use this code to Select/Copy a section of that import;
Selection. Offset(4, 0).Resize(15, 9).Select
Selection.Copy
'The number 15 would mean there are 15 rows of items.
But there are not always 15 rows. There might be 18 rows, but because the code is set to 15 it will miss selecting 3 rows preceding, or if the code is set to 12 it will not select the full item list. However, whatever the amount of rows of items, be it 15,2 18 or 100 for example, directly under the item amounts is a "marker" purposely put in the file before the import for other search functions.
Above that marker is the total Item count! So I need a code to search for that marker, then move up 1 cell and whatever that number is, if "15" would then determine the correct row count to Resize
The "marker" is : ^3^
So the full code is:
Macro1 ()........................
View 8 Replies
View Related
May 13, 2008
I want to be able to add new accounts in the New Account Input sheet (consistent of names and number) and then push a button to paste them in the next free row on Account master.
I do know how to assign a macro to a button - its just the actual vb coding Im struggling with.
View 6 Replies
View Related
Jun 18, 2014
I would like to do the following in a copied down row where n5 is a cell that contains a number that is added to a row number in order for the range to maintain n5 rows when copied down.
=average(b1:b1+n5)
View 11 Replies
View Related
Oct 12, 2011
I wish to copy a range which has the variable adderss in a cell.
Example the address is located in D2 and the address in that cell is B4:R113
I want to select the information in D2 for copying.
View 4 Replies
View Related
Aug 15, 2007
I am trying to write a very basic macro to copy and paste, but when I record the keystrokes, step 4 (see below) seems to be recording absolute cells and not relative (?). At any rate, I can't seem to figure out how to get it to select the text the way I want it to. These are the keystrokes I want:
1. Ctrl-c in the current cell <copy the current cell>
2. DownArrow <move down one cell>
3. Shift(hold)-End-Down <select the blank spaces from here down until the next occupied
cell>
4. Shift(hold)-Up <move the selection up one from the bottom to exclude the occupied cell>
5. Ctrl-v <paste>
6. End-Down <move down to the last occupied cell>
I have set the record tool to record "relative" references.
Below is the code that was recorded. It's line 5 that's not working - how do I fix it? What is the command to tell the program to press the shift key and an up arrow?? Such a simple thing, and yet I can't find the answer anywhere! Things sure have gotten complicated since the old Lotus 1-2-3 macro language...
Sub Fill()
Selection.Copy
ActiveCell.Offset(1, 0).Range("A1").Select
Range(Selection, Selection.End(xlDown)).Select
ActiveCell.Range("A1:A17").Select
ActiveSheet.Paste
Selection.End(xlDown).Select
End Sub
View 8 Replies
View Related
Apr 13, 2013
Here is my problem. I have a a workbook with 2 sheets.
Sheet 1= Data sheet; Sheet 2 = Table
On sheet 2 I want to copy down an entire row (A8:AH8) but the problem is that the number of copied rows depends on the number of rows contained in sheet 1 column A (-1 row)
So if i have 101 records (100 +label) in column A sheet 1, in my sheet 2, it must copy down the formulas from (A8:AH8) until (A107:AH107)
View 2 Replies
View Related
Oct 8, 2013
A
B
1
AAPL
MSFT
2
='C:Documents and SettingsSASTCMy DocumentsStock Data[AAPL.csv]AAPL'!E2
='C:Documents and SettingsSASTCMy DocumentsStock Data[MSFT.csv]MSFT'!E2
How should i COPY automatically "XYL" written as in formula (XYL.csv and XYL') comprehending with the top bar?
Tried "&C1&" but it`s not working.
View 9 Replies
View Related
Dec 3, 2013
I would like to copy a cell in v2 to from v3 to end of column v where there are values in column u.
View 4 Replies
View Related
Mar 5, 2008
I have the following code which Clears the content of a cell. The next thing I want to have happen is to have another cell equal a formula but make that formula relative to its place. The formula is the following =IF(ISERROR(VLOOKUP(F56,Routes_All,2,0)),0,VLOOKUP(F56,Routes_All,2,0))
I am not sure how to paste it where the row changes depending on where it is pasted. Here is the code that does not work...
Private Sub CommandButton1_Click()
Worksheets("2008 Log").Select
Dim cRow
cRow = ActiveCell.Row '
Cells(cRow, Range("Column_Type_Of_Ride").Column).ClearContents
Cells(cRow, Range("column_duration").Column).value = "=IF(ISERROR(VLOOKUP(F56,Routes_All,2,0)),0,VLOOKUP(F56,Routes_All,2,0))"
End Sub
As you can see, no matter where I paste it it will always refer to row "F". How can I have it refer to row "cRow"?
View 2 Replies
View Related
Jan 17, 2012
I am trying place the "sum" formula into multiple cells, changing with "i" (itteration process).
Something like:
.Range(17,counter).formula = "=Sum(B2:B20)"
when the couter itterates, the same line of code should give:
.Range(17,counter).formula = "=Sum(F2:F20)"
My actual code looks like: ... which doesnt work.
.Offset(17, " & ColumnHeadCout & " + 1).FormulaR18C" & ColumnHeadCout + 1 & " = ""=SUM(R[20]C[" & ColumnHeadCout + 1 & "]:R[" & NumberStreamElem + 20 & "]C[" & ColumnHeadCout + 1 & "])"
View 9 Replies
View Related
Aug 9, 2007
I've developed a code to load csv files in excel and do some formatting on it. In addition I want to add a few cells which calculate making use of the data in the file. The data tabel (resulting after the csv import) always has the same number of columns, but the number of rows varies depending on the imported file.
My problem now is that I need to change the formula for my calculation depending on this number of rows.
This is what I got so far (not including the csv import):
Option Explicit
Dim varRow As Double
Function fctCountNrRows() As Double
Range("A1").End(xlDown).Select
varRow = Selection.Row
End Function
Sub subAddTotals()
fctCountNrRows
Cells(varRow + 2, 1).Select ..............
View 9 Replies
View Related
Oct 3, 2007
I have an excel based report where I drop data into a blank spreadsheet each month and my formula (in a second worksheet) finds the relevant information. I do this by using the Match function on the first row of my source data. This finds the column numbers to the data I am interested in. (This is handy as additional columns of data appear almost every month). Most of my formula (in the second worksheet) works on vlookups using the column number from the match function.
However, I need to do a sumif. Sumif requires cell references rather than a column number. How can I get around this? Due to the nature of the report, VBA isn't appropriate in this instance. I'm only producing the initial report; someone else will be updating it each month.
View 2 Replies
View Related
Nov 27, 2007
It is useful to use lookup function to find the student name. However, if the table array size is variable
(say, a new student enrolled and the table array will be $A$2:$B$7), the table array size will be changed
and we need to change the vlookup function. How to avoid it? Can we use some kind of variable for the
See attached file( book1)
View 9 Replies
View Related
Mar 12, 2008
How do I pass MATCH or COUNTIF the current dynamic row instead of hardcoding $3? The column is fine hardcoded. Column F has data validation allow List with source equal to dynamic range "userlocation". Column H has data validation allow List with source =OFFSET(userlocation,MATCH($F$3,userlocation,0)-1,1,COUNTIF(userlocation,$F$3),1)
In Column H, this will in effect provide me with a list of values based upon the value of cell F3. Problem is I can't seem to figure out how to reference ROW as a dynamic reference in my MATCH and COUNTIF function.
EX
Column F Column H
Screen1 (if Screen1 = value in my dynamic range pass me back value in a list)
Screen2 (if Screen2 etc.
Screen3
View 3 Replies
View Related
Aug 3, 2006
The problem lies in the following line
Range(Cells(1, a), Cells(b, a)).Formula = _
"=(rc[-1]-" & min & ")/(" & max & "-" & min & ") "
When it is executed i get the 1004 error ("application-defined or object-defined error)...
min and max are defined (as worksheetfunction.min and max of a selection), and their values are correct. The problem seems to lie in the max variable, namely if i simplify the formula to just
Range(Cells(1, a), Cells(b, a)).Formula = "=(rc[-1]-" & min & ")"
it works ok, but if it is
Range(Cells(1, a), Cells(b, a)).Formula = "=(rc[-1]-" & max & ")"
I get the error.
I am completely baffled considering both variables are defined in the same way i.e.
min = Application.WorksheetFunction.min(Selection)
max = Application.WorksheetFunction.max(Selection)
View 9 Replies
View Related
Oct 8, 2007
Here is what I would like to do: Have a formula like Max(B12:B14) change to Max(B12:B18) when I change the value in different cell from 3 to 7. I would like to stay away from the macro world and keep in formula world if that is possible.
View 6 Replies
View Related
Dec 3, 2013
Code:
=SUMPRODUCT(--(_NamedRng1=NamedRng2),$B$49:$F$49)
I am using the above formula in my code with two Named Ranges
Code:
Set Rng3 = Range("_NamedRng1").Offset(1, 0)
=SUMPRODUCT(--(_NamedRng1=NamedRng2),rng3)
[/CODE]
I want to set the range $B$49:$F$49 in my code and I have tried the above, but it does not work.
I want to allow for the fact my end user may insert rows so do not want to use $B$49:$F$49
View 2 Replies
View Related
Apr 2, 2014
Basically, i have a common workbook template that is used by multiple users across the business to request a cost for numerous new products.
Within the template, there is a common section at the top, where specific project information is entered. There is also a table beneath where 1 or many products can be entered, with specific information relating to that product in the same row.
All the submitted requests are uploaded via an email attachment, to a particular sharepoint directory.
What i would like to do in the master workbook is the following:-
1. Open in turn every uploaded workbook within the sharepoint directory and copy the following cells into the master workbook, each in it's own row (or next available), with the data in adjacent cells.... 1st cell to enter data is $B6.
Cells to copy from each sheet:
Common info contained within cells:
$DG$2,$N$11,$N$12,$N$19,$N$13,$AO$7,$AO$8,$AO$9,$AO$10,$AO$11,$AO$12,$AO$12,$AO$13,$AO$14,$BO$8,$BO$11,$BO$14
Product specific info: $U37, $AD37, $AH37, $DH37, $C37, $O37
Depending on the number of products requested, we need to repeat (loop?) until it finds the next blank row in the table. I have hidden a blank row in the table, so there will always be one!
All of the common information needs to be included for each product specific entry.
For each file, once the upload has been completed, i would like the file to be moved to another "archive" directory.
I have attached the template for information. The master workbook is still in development so can't share currently.
View 12 Replies
View Related
Aug 8, 2009
On the attached Excel file, I have code that will insert a variable number of rows and copy and paste from and to variable positions. That all works fine when run from a command button, but when I try to run it from the Worksheet_Calculate by entering 1 in J1 or K1 (inrange cell is J1+K1 for testing purposes) the CommandButton1_Click sub runs continously until an error occurs.
View 4 Replies
View Related
Nov 10, 2006
Say you define a public range variable called Inputworksheet and you set it to refer to the worksheet called Inputworksheet. You have a separate string variable with the value Inputworksheet. How do you get this string variable value to call/control the range variable Inputworksheet?
I am getting an excel worksheet value from a lookup function that corresponds to the name of a VBA range variable. Once I have this worksheet value, I would like to use the range variable that has the same name as the worksheet value.
View 5 Replies
View Related
Apr 4, 2008
I am trying to autofill dynamic ranges that have column variables (d) and row variables (x)... I am having a hard time with the syntax on this
View 9 Replies
View Related
Oct 3, 2008
I've been searching internet for quite a long time without luck, hope somebody can shed some light here.
I have two workbooks, let's say A and B, I need to copy a range R1 in Sheet1 of workbook A to Sheet1 of workbook B. The code I use like this:
View 6 Replies
View Related
Feb 6, 2007
I have a formula that is averaging seven (one week) consecutive cells, I want to Copy/Fill the formula down the worksheet for the entire year. Is there a way to use the fill handle to drag down and make the formulas use the next seven colums?
I have removed the $ from the row numbers in the original formula, but when I use the fill handle it fills like this:
=average(B2:B8)
=average(B3:B9)
I would like it to fill like this:
=average(B2:B8)
=average(B9:B15)
View 9 Replies
View Related
May 26, 2008
In my data validation I have the following formula as the Source: =INDIRECT(SUBSTITUTE($F$2," ","_")). I want to be able to copy the cell and paste it into another cell and have the formula update to reference the new cell. Currently the validation is for cell G2 and references F2. I want to be able to copy G2 and paste it in G3-G6 having the formula update so it refrences F3-F6.
View 3 Replies
View Related
Mar 11, 2008
I am using a variable named " Totals" as a range type to refference the range in a formula. It works the way I have it.
Dim Totals As Range
Set Totals = [U37: AE37]
Now instead of the absolute refference, I would like to change the row refference by an offset of my current row, using a formula with a varriable. The columns stay the same.
View 3 Replies
View Related
Apr 4, 2008
I have a cell B10 which contains a formula.
I would like a macro which copies this formula across the same row.
However, the macro should prompt the user to select a range.
Based on the range selected and in particular the columns in this selected range, I would like the macro to copy the formula only for the columns specified in the selected range.
View 9 Replies
View Related
Oct 27, 2008
I want to automate the following steps when cell A8:A11 changes in sheet "InfoAA":
(1) clear contents and formats of cells A1:A4 in sheet "InfoBB"
(2) copy cells A8:A11 of sheet "InfoAA" (which are formulas) and past it as text in cells A1:A4 of sheet "InfoBB".
(3) then automatically run a recorded macro named "BoldFirstName"
See attachment.
View 6 Replies
View Related
