Count Macro :: Rows That Have An Inclusion Date, But Not An Exclusion Date
Apr 26, 2007
I have data in 3 columns: Name, Inclusion Date, Exclusion Date. In some instances, the inclusion date and exclusion date will be zeroed out - I do not wish to count those. What I would like to count is the rows that have an inclusion date, but not an exclusion date. Ideally, I would like to have a code so that when I run a macro a msgbox appears that indicates how many members there are.
I have a spreadsheet with rows and rows of data by date. The far left column houses the date and then each row is another occurrence for that date. Basically I need to count how many rows have the same date. Here is what the basic sheet looks like:
So the formula I am looking for would return, 6/15/13 =5, 6/16/13 = 2, 6/17/13 =3. Or something along those lines. I have a ton of data and using pivot table info to filter by each day will take FOREVER.
I have rows of data in excel that update automatically and i want to check in column B how many times there are simultaneous occurrences of a cell value and then if those occurences have been there for a time specified time duration using column C which has a time and date stamp. The time and date stamp is when the price is saved down.
A Simplified Example: Item Action Date & Time
Red Buy 09/05/2014 09:00
[Code] .....
What I would like the formula to is to count the occurrences of cell B that have been avilable for longer than say 30 minutes.
Formula that worked out the occurrences of cell B with this formula
So if i wanted to count the simultaneous occurrences of "Buy" then the formula would result 1 and the same for sell if i changed the formula would be 2.
Now i want to try and get a way of using the time those occurrences were available for by using Column C
The simultaneous "Buy" was available from 09/05/2014 09:00 to 09/05/2014 11:01 which is longer than 30 minutes so i want to count that as a occurrence.
Then both the "Sell" were only available for 14 minutes the first time and then only for 20 minutes the second time so none of those would count.
I have a list of ID# (Col A) and dates (Col B). The ID # of reference is Col (F) and today's date (Col G). I need to count how many future dates there are in the list (Col B) that are unique and in the future from today's date.
I'm still fairly new to all these formulas and functions which is why I'm not attempting this in VBA.
I've attached an example work book and I would like the result in H2.
I'm trying to use countif or similar to show how many times a given date is between 2 dates (inclusive). Each row of the spreadsheet contains amongst other info, a Start Date and an End Date. If i've got 2 rows like this:
I'd want to lookup 02/01/2009 and have it return 2 (02/01/09 falls between the dates on row 1 and the dates on row 2). To give some context, this is an export from a database containing staff holiday dates, and I'd like to be able to see how many people will be on holiday on any given date, given the start and end date of all holiday occurances throughout the year.
I have a spreadsheet which I use to track when a work request is recieved, when we confirm the request and when we action the request. I have been trying to write some code to count the amount of requests, receipts and actions we have processed in the last month.
My first column shows who the request is from The second shows date recieved The third shows date we send receipt The fourth shows the date actioned.
I need to build a macro which copies 3 rows every day and pastes the row data into an identical sheet. The three rows will have column "D" as =today(). As the days progress the three rows will change accordingly ( tag to the today's date)
e.g. 28/1/2014 28/1/2014 28/1/2014
I need the macro to recognize the date when pressed and copy the corresponding rows of data and paste them into an identical sheet with the same date. The second sheet is an archive sheet. The date will tick over as per the calendar.
I wondering if it's possible to create a code to have a popup where the user can enter a date in mm/dd/yyyy format and then all rows containing that date will be deleted.
I am developing a macro that will copy over the row from one workbook to another based on today's date. I have looked but having some trouble finding a solid way of doing this.
Starting at E8 and going down the E column there is a list of non sequential dates that could potentially be very small or extremely large. These dates must be sorted in ascending order together with all the data in their respective rows so for example
John Ball 20/2/07 Mark Dunn 19/2/07 Tim Jones 18/2/07
should be sorted as
Tim Jones 18/2/07 Mark Dunn 19/2/07 John Ball 20/2/07
If anyone can write such a piece of code it'd be very time saving.
I have tracker, where Cells in Column F have dates or are blank.
I am trying to run a macro to delete all rows when the following criteria apply:
for all cells in column F, if date < 1-Oct-2013 then entire row should be deleted if cell is blank - nothing should happen This is what I got so far - but it is not working...I have entred the date "10/1/2013" in cell AA2 but macro should always check against that date (not variable) so it might not be needed.
Sub PART3_Delete_old_team_members() Columns("F:F").Select Selection.NumberFormat = "m/d/yy;@" Dim endrow As Integer On Error Resume Next endrow = Sheets("Global Team List").Range("F900").End(xlUp).Row Searchdate = "AA2"
I have a worksheet that has a sent date and expected delivery date I need create a macro that will alert me if today's date is within 5 days of expected delivery date.
I have an excel sheet wherin there is a column that has the data where in the dates are displayed and many other columns.
I get this excel every Thursday so i want to filter this date column in such a way that it give me the data related to the date of the previous week only yet there is a catch here. When i say previous week i mean.
Suppose today is 03/14/14 then i want the data from 03/07/14 till today ie Last week friday to this week full( so cant use Current week option) and then paste it in a new sheet.
I tried the Record part but in that it is taking a hard coded value as i am selecting the date myself. I dont want to change the date manually every time.
I am trying to adapt a macro which deletes all rows in Worksheet 1 where the date in column K differs from a date in Worksheet 2. The date in Worksheet 2 will change each day.
I think the macro below could be used, but don't understand how to replace the "Value = ":70:" with a reference to the master date in Worksheet 2.
Sub test() Dim lr As Long, i As Long lr = Range("A1").End(xlDown).Row For i = lr To 1 Step -1 If Cells(lr, 1).Value = ":70:" Then Cells(lr, 1).EntireRow.Delete End If lr = lr - 1 Next i End Sub
Aim: To create a Macro to hide all rows where the date in column D is before today. Column D has about 600 rows.
Current solution:
Code: Sub Hide_Old2()
'Worksheet name With Worksheets("Schedule") 'set start of date range Set rngStart = .Range("D2") 'find end of date range
[Code] .....
The problem with this solution is its speed, or lack thereof. It causes the screen to hang and flicker while it cylces through. Is there some way to create a range based on the date and hide the range? or another solution?
Note: Autofilter is not an option, as the spreadsheet with the dates needs to be kept simple for other stakholders and the macro is being run from another sheet.
see my attached sheet cotaining the following questions. in a day report sheet how should i count request matching the crateria of date and other conditions. in a monthly report a heavy conditional sum calculation which make slower sheets how can i make it faster.
I import data from web forms via Excel Web Query which has dates in the US format. I would like to convert them to the uk format. Unfortunately, unlike other data import functions in excel, web query doesn't seem to have an option to choose that. Also after asking the forum via this post, I figured that I cannot use a formula to do this, and need a macro. I recorded a macro which exports text to columns where I choose MDY function to convert the date.
However, the macro doesn't convert the bottom part of the blank cell for some reason. The macro did not work in either modified or untouched versions. When I actuallly do it through excel buttons, it works.
I have a table of data (total 142 rows). Column contains dates, in the format dd-mmm-yyyy.
I tried to filter using DATE FILTERS->EQUALS and in the custom filter window, I chose EQUALS then picked a date from the date picker icon. The date I picked was 5/4/2009 (this is May 4, 2009, formatted automaticall by excel as m/d/yyyy).
When I clicked OK, nothing showed up despite the fact that there are 6 occurences of May 4, 2009 (formatted as dd-mmm-yyyy in the data table)
So my questions are:
1. Is this due to the formatting?
2. Is there a way to change the date format supplied by the date picker?
I am now trying to create a excel macro to auto populate all the dates with reference to a start date and end date. The catch is that only working days are required in the range. My reference cells (start and end date) are in Sheet 1 while the destination cell range are in Sheet 2. The reason for creating a macro instead of a function is that the intervals between the start date and end date changes frequently (annual, semi-annual and quarterly) Best case scenario would be a button which I can just press after i input the dates to generate the range of dates in another sheet.
I'm trying to workout how to take a known initial date a repeating frequency and work out the next due date from today.
Example
Initial Date :- 1st of January 2014
Frequency :- every 5 weeks
Current Date :- 9th of March 2014
Next Due date should be :-12th of March 2014 (if I worked it out correctly from my paper calendar)
I want to use a cell formula to do this for different initial dates and varying frequency periods (the frequency will always be whole weeks i.e. 1,2,3,4,5,6,7,8,8,10)
I need to create formulas that reference a single date and output date ranges. The objective is to have a person input a Monday date in any given month and receive a four weeks out worth of dates and ranges. For example: In a lone cell, the person inputs 10/13/08. Automatically, the sheet produces the next full week range: October 19 – October 25 in a single cell and also produces a cell for each date. Example: Sunday 19, Monday 20, Tuesday 21, etc…. It should look like:
and then repeat for three more weeks. I thought I had it figured out until the month changed. The dates continued in October instead of adding a month. This report will be ran weekly, so simply adding a +1MONTH to some cells will not benefit me as I’ll have to change the formula every week. I want the formula to compute the data without any manipulation over the next several years. The only change will be the Monday date.
I have data going in to a small table which has some empty rows as that data is not yet available... My problem is, I need to sort this table in date order but with the date nearest to today's date at the top...
The sort function puts oldest at the top or oldest at the bottom which is no good for what I need...
I am trying to create a macro to run from a form button, within a report, to save a file to a variable file path and name depending on the date value in cell B5.
The format of B5 looks like - 13/08/2014 16:39
The file path has folders for each year in format "yyyy" with each year having sub folders for each month in format "mm".
The file name is just the date only and is formatted "dd.mm.yy" e.g. 13.08.14
I have tried the code below in various permutations but always end up with an error - Method 'SaveAs' of object '_Workbook' failed.
I am trying to exclude a certain value from an array of numbers to get a percentage. I have data that populates on its own and in the same columns regularly. The data contains a country name in column A, a year in columnB and a value in column C. I am trying to exclude the value for the U.S. in the totals so that I can get a percentage of values outside of the U.S.
So that the sum of all of the rows less the value corresponding to the U.S., divided by the sum of all of the values. The problem is that the location of the U.S. value and U.S. designation varies with different inputs (this cannot be helped), so the formula must be able to follow it.
I have been able to do this but not without a lot of extra cells and rows, and I would like to have a single formula.