I have a spreadsheet with rows and rows of data by date. The far left column houses the date and then each row is another occurrence for that date. Basically I need to count how many rows have the same date. Here is what the basic sheet looks like:
So the formula I am looking for would return, 6/15/13 =5, 6/16/13 = 2, 6/17/13 =3. Or something along those lines. I have a ton of data and using pivot table info to filter by each day will take FOREVER.
I have data in 3 columns: Name, Inclusion Date, Exclusion Date. In some instances, the inclusion date and exclusion date will be zeroed out - I do not wish to count those. What I would like to count is the rows that have an inclusion date, but not an exclusion date. Ideally, I would like to have a code so that when I run a macro a msgbox appears that indicates how many members there are.
I have rows of data in excel that update automatically and i want to check in column B how many times there are simultaneous occurrences of a cell value and then if those occurences have been there for a time specified time duration using column C which has a time and date stamp. The time and date stamp is when the price is saved down.
A Simplified Example: Item Action Date & Time
Red Buy 09/05/2014 09:00
[Code] .....
What I would like the formula to is to count the occurrences of cell B that have been avilable for longer than say 30 minutes.
Formula that worked out the occurrences of cell B with this formula
So if i wanted to count the simultaneous occurrences of "Buy" then the formula would result 1 and the same for sell if i changed the formula would be 2.
Now i want to try and get a way of using the time those occurrences were available for by using Column C
The simultaneous "Buy" was available from 09/05/2014 09:00 to 09/05/2014 11:01 which is longer than 30 minutes so i want to count that as a occurrence.
Then both the "Sell" were only available for 14 minutes the first time and then only for 20 minutes the second time so none of those would count.
I used Sheets(1).Cells(1, 1).Rows.End(xlUp).Count instead of UsedRange.Rows.Count in this code , but it didn't succed with me. Why and how to do that
Dim i As Long, j As Long j = 1 For i = 1 To UsedRange.Rows.Count Sheets(2).Cells(j, "a").Value = Sheets(1).Cells(i, "a").Value Sheets(2).Cells(j, "b").Value = Sheets(1).Cells(i, "b").Value Sheets(2).Cells(j, "c").Value = Sheets(1).Cells(i, "c").Value j = j + 1 Next i End Sub
see my attached sheet cotaining the following questions. in a day report sheet how should i count request matching the crateria of date and other conditions. in a monthly report a heavy conditional sum calculation which make slower sheets how can i make it faster.
I have a spreadsheet of over 15,000 lines of student information, sorted by student number. I want to count the number of rows which have a duplicate student number, up to 15 duplicates in a row, and show the total number of duplicates in a Separate Column. I.e.
I've been trying to use a Countif formula, but I found I had to use so many ANDs and ORs that the formula became too long. I don't know how to use programming code, only formulas in Excel. Is there an easier solution using some type of SUMPRODUCT code?
I have a list of ID# (Col A) and dates (Col B). The ID # of reference is Col (F) and today's date (Col G). I need to count how many future dates there are in the list (Col B) that are unique and in the future from today's date.
I'm still fairly new to all these formulas and functions which is why I'm not attempting this in VBA.
I've attached an example work book and I would like the result in H2.
I have data in B4:B55 and need a formula to return a count of rows, including rows that are blank. However, there are hidden rows that need to be omitted from the count.
I'm trying to use countif or similar to show how many times a given date is between 2 dates (inclusive). Each row of the spreadsheet contains amongst other info, a Start Date and an End Date. If i've got 2 rows like this:
I'd want to lookup 02/01/2009 and have it return 2 (02/01/09 falls between the dates on row 1 and the dates on row 2). To give some context, this is an export from a database containing staff holiday dates, and I'd like to be able to see how many people will be on holiday on any given date, given the start and end date of all holiday occurances throughout the year.
I have a spreadsheet which I use to track when a work request is recieved, when we confirm the request and when we action the request. I have been trying to write some code to count the amount of requests, receipts and actions we have processed in the last month.
My first column shows who the request is from The second shows date recieved The third shows date we send receipt The fourth shows the date actioned.
I need to build a macro which copies 3 rows every day and pastes the row data into an identical sheet. The three rows will have column "D" as =today(). As the days progress the three rows will change accordingly ( tag to the today's date)
e.g. 28/1/2014 28/1/2014 28/1/2014
I need the macro to recognize the date when pressed and copy the corresponding rows of data and paste them into an identical sheet with the same date. The second sheet is an archive sheet. The date will tick over as per the calendar.
I wondering if it's possible to create a code to have a popup where the user can enter a date in mm/dd/yyyy format and then all rows containing that date will be deleted.
The first one (Top Ten Auto Generator.xls) ( Sheet is Summary) has 1 row (13) with 4 cells that have data. A13 with date (today formula), B13, D13, and E13 are numbers. The cell range will be the same each time the data is copied (the workbook has a marco to generate the numbers each day already).
The date doesn't need to be copied, just the other 3 cells data (in the same order) using paste special.
The workbook that needs the cell data is a report ( Dashboard.xls) that has lots of different departments each using 3 columns for their specific data. The left most column A is the date listing to match.
The column Range for my department on that "Raw Data" sheet is "H", "I", & "J" where the "H" would get the data in "B13", "I" would get "D13", "J" would get "E13" for the date that matches the other workbook.
So the way it would work, is that once the vba is run the 3 cells from the auto generator are copied, then the vba opens the dashboard.xls and looks for the date in column A which matches the other workbooks A13 date value, and then the cells are pasted into that row, but in column H, I, & J.
Here's sort of some code that I put together to see if that would be easier to understand. I'm new at doing the vba so I don't have better code.
Private Sub CommandButtonpaste2dash_Click()
'get our data from generator
Windows("Top Ten Auto Generator.xls").Activate Sheets("Summary").Select Range("B13,D13,E13").Select Range("E13").Activate Selection.Copy Workbooks.Open "Dashboard.xls" Sheets("Raw Data").Activate
'look for the date in column A which matches A13 in the Auto generator Some Code For finding the right date
'once found, paste special to the same row, but in column H (the 3 cells should paste together ok) some code For pasting into H In the same row As the found date
Selection.PasteSpecial Paste:=xlPasteValuesAndNumberFormats ActiveWorkbook.Save MsgBox "Done!!!" End Sub
I have tracker, where Cells in Column F have dates or are blank.
I am trying to run a macro to delete all rows when the following criteria apply:
for all cells in column F, if date < 1-Oct-2013 then entire row should be deleted if cell is blank - nothing should happen This is what I got so far - but it is not working...I have entred the date "10/1/2013" in cell AA2 but macro should always check against that date (not variable) so it might not be needed.
Sub PART3_Delete_old_team_members() Columns("F:F").Select Selection.NumberFormat = "m/d/yy;@" Dim endrow As Integer On Error Resume Next endrow = Sheets("Global Team List").Range("F900").End(xlUp).Row Searchdate = "AA2"
From within a column in a separate worksheet I am trying to determine how to sum or count the number of dates listed within that column that fall within a certain date range. For instance, April 1 through April 30, 2009; if there are 10 dates in that column that fall within that date range I want the formula to return the sum of 10.
I have a membership list that has a column with the data that membership will expire. I want to create a formula that will allow me to count the number of members who membership will have expired by the end of the year. Some memberships have already expired, so it isn't just 12/31/2013, but everything before 12/31/2013.
Count all the true statements in column A (Work) of sheet1 (Checklist), once counted insert that many rows on sheet2 in a specific location, I found a count formula just don't know how to do the insert rows part
Code: Sub CountRows() Dim Rng As Range, CountTrue As Long Set Rng = Sheets("Checklist").Range("Work") CountTrue = Application.WorksheetFunction.CountIf(Rng, "True") End Sub
I have a problem if column A has 10 dates (some the same) i need to count the seperate dates ie if A1;A10 has 4 dates of 24-09-09 i need to total that many dates which is 4 to go into a cell named Thursday 23-09-09 will add up and go in wed and so on sorry no example no winzip in work.
i'm having trouble with a counting formula that involves two columns. i need to count the number of times that a unique value from one column occurs/appears in another column (which i'm narrowing down to each month).
The union has instated a new policy here and new hires now have a 120 working day probationary period. That comes out to about 6 months. ( 168 days minus the 48 days off) . what I’m looking for is a formula that will calculate each date that has passed as one starting at a –48 … also adding in to the equation that every day sick counts against that 120 and everyday of OT counts as positive brining them closer to the 120 they need.
I can figure out the math part of adding and subtracting the days. But what I can’t figure out is how do I get it to read each date as one starting from the date in cell b3
Example cell b3 has 9/25/06 cell b4 has 3/12/07 all the days that have passed count as one.
The total starts as a –48( due to the days off) with the verabial, d8 is a negative and d9 is a positive. To be added in to the total.
I thought my formula would return the number sold (SLD) from column A, but it returns 0. Any idea where I'm messing up? {= SUMPRODUCT(--(A2:A30="sld"),IF(B2:B30>=D3,IF(B2:B30<=D4,A2:A30)))}
CREATE TABLES LIKE BELOW? --A--- ----B----- -------C-------- ---D---- 1 Status Close Date 2 SLD 04/26/07 Full Year Stats 3 SLD 04/27/07 From Date 04/20/07 4 SLD 05/02/07 To Date 04/20/08 5 SLD 05/03/07
I have 2 sheets in my workbook. On the first sheet (KPI) I have a cell with a date in, this is always the first date of a month. On the second sheet (MCR) I have all my data.
I am trying to write a formula (which is loacted on the front sheet [KPI]) to count the number of cells that contain a date that falls on or after the date on the front page, as such I have the following:
=COUNTIF(MCR!S2:S200,>= F8)
Where F8 is the cell with the date i.e 01/05/2008
When i run this I get an error, it appears that the formula is trying to look for cells that contain the date "F8" instead of the date,
Col A Col B 163401 1 163401 1 163401 0 163402 1 163402 0 163402 0
GOAL -I want to be able to count Col B only once for the same set of records in COL A.
Based on Distinct criteria on COL A, I need to be able to count COL B. The count should be 1 for 163401 and not 2. Similarly for 163402 the count should be 1