Counting Rows Based On 2 Columns (Distinct)
Mar 19, 2007
From a base table, I need to create a new table listing only the unique combination of 2 columns and their individual sum. Example:
Base Table:
ITEM-----Loc-----QTY
Pen------School----5
Pencil----Office-----9
Binder---Office-----9
Pen------Office-----6
Pen------School---15
Binder---School---12
Pencil----Office----10
Binder---School----6
Pen------Office----11
I need to have a table resulting to the following:
Item-----Loc------Qty
Pen------School----20
Pencil----Office-----19
Binder---Office------9
Pen------Office-----17
Binder---School----18
View 9 Replies
ADVERTISEMENT
Apr 18, 2013
I am trying to count multiple occurences.
Instrument Name
Times Traded
AEON CO LTD
6
ASICS CORP
3
ELECTRIC POWER DEVELOPMENT C
10
In column C (Times Traded) I have used a simple countif formula: =COUNTIF($B$2:$B$8068, C2)
Now I have to check for how many times this instrument was bought or sold. This is in column A .... How will I count the Buy values ... cause this formula I devised doesnt work =COUNTIF($B$2:$B$8068, and(C2, A2:A8068="Buy")
View 4 Replies
View Related
Aug 5, 2014
I'm working with a set of text values. The sets of text can be either 2 or 3 chars long (in this example 2), and are separated with a pipe. The end char for each set of chars in fixed. In this case a Z.
I'm looking for a formula which counts the unique / distict number of sets of chars. I have been trying to use COUNTIF with a wildcard (?Z), but unfortunately I haven't been able to find the correct formula yet.
For example.
|AZ|AZ|AZ|BZ|AZ|AZ|BZ|AZ|BZ|AZ| -> 2 (AZ, BZ)
|AZ|AZ|AZ|BZ|CZ|AZ|CZ|AZ|BZ|AZ| -> 3 (AZ, BZ, CZ)
|CZ|BZ|AZ|BZ|CZ|AZ|EZ|AZ|FZ|AZ| -> 5 (AZ, BZ, CZ, EZ, FZ)
|BZ|BZ|AZ|BZ|CZ|AZ|EZ|AZ|GZ|AZ| -> 5 (AZ, BZ, CZ, EZ, GZ)
View 9 Replies
View Related
Sep 28, 2011
How to calculate a count of unique records across two columns (customer number and acct number) with out much luck. For example, a customer number may appear 3 times but be associated with 3 separate acct numbers.
I've found a lot of in-depth formulas online but I'm not sure if they're what I need. I think I need some sort of array formula but I'm a little stuck.
View 9 Replies
View Related
Aug 5, 2009
I am using ADO to select data from a CSV file, column 1 has some duplicate Incident numbers, but the rest of the columns the data may be different but not interested in that so I cannot use SELECT DISTINCT incident, desciption as this applies to all columns
so I tried the following
StrSQL = "SELECT DT.IncidentNumber, ST.Description -
FROM (SELECT DISTINCT IncidentNumber FROM " & StrFile & " ) DT -
INNER JOIN " & StrFile & " ST ON DT.IncidentNumber = ST.IncidentNumber"
however it returns ALL rows, if I use just
SELECT DISTINCT IncidentNumber FROM " & StrFile
I get the rows I am interested in but not the extra data I require
View 9 Replies
View Related
Sep 12, 2006
I have a data set with rows of data, with a header row along the top. I want to sort my rows of data by column when the cell above the appropriate column is pressed. I know this seems cumbersome - but it fits in with the sheet. The sheet is protected, and we only want the user to be able to sort in this fashion. My problem is, with my code, I get an error when you select a range of two of the header cells. The case selection on the target.column gets confused. How can I check to see if it's just one cell? Is there a property of a range that reflects how many rows or columns it contains? I tried the following (marked with the ' )just from picking out of the pop-up list of properties of the Target range in SelectionChange, but obviously it doesn't work. My original code is the un-'-ed code.
Private Sub Worksheet_SelectionChange(ByVal Target As Range)
' If Target.Rows = 1 And Target.Columns = 1 Then
If Target.Row = SortRow Then
Select Case Target.Column
Case PriorityColumn
SortData PriorityColumn
Case JobColumn
SortData JobColumn
Case NotesColumn
SortData NotesColumn
Case SupervisorColumn
SortData SupervisorColumn
Case ShutdownColumn
SortData ShutdownColumn............................
View 2 Replies
View Related
Mar 3, 2007
In my Macro , i add a worksheet and depending on certain conditions i decide whether to populate it or not.
At a later point of time i am checking if the newly created worksheet is empty or not using the following check :
If ActiveWorkbook.Worksheets(ISheet).UsedRange.Rows.count <> 0 Then
Now what i have noticed is that even in cases where the "ISheet" is empty the above condition evaluates to true for the first attempt. I cannot understand why ?
let me know if the query is ambiguous and i will post the code snippet
View 3 Replies
View Related
Aug 6, 2014
So far I created code that creates a Distinct Unique item's list for one column. It works as it should but I want to modify the code to create a Distinct Unique item's list for two columns that are related to another i.e. a person's name to their license #.
Here is the code below that works for one column only:
[Code] ......
View 9 Replies
View Related
Mar 6, 2003
I have several columns in an excel sheet which contain values (eg. Names). The entered names can be unique or already exist in the column. I need to find out (using a function or macro) how many different names were entered. Duplicates shshould be ignored in the count.
View 9 Replies
View Related
Aug 21, 2013
I have a range of data and need to summarize some of the data. In the table below is an example of the data. I would like to have a single formula where I can count the number of rows where the end date - start date is < 14 days. I would prefer not to add an additional column for the datediff value. Is there a way to do this with either arrays or named ranges?
Name
Start
End
Other data
Verizon
1/10/2010
1/25/2010
AT&T
3/2/2010
4/14/2010
View 1 Replies
View Related
Oct 28, 2008
I've got two worksheets. One contains data from a query, the other worksheet should count rows in the queryresults based on two criteria. See example.
I tried doing it with sumproduct in the normal variant and the array-variant...
View 8 Replies
View Related
May 30, 2014
I have two lists in different columns, which are defined ranges. I want to extract them to a unique list with an array formula and at the same time sort albafetically, without duplicates, like this:
List1
List2
Final List
Audi
Ford
[Code] ....
So far, I have this formula which is working in what concerns removing duplicates and exctract a unique list. But it is not ordering alfabeticaly.
{=IFERROR(IFERROR(INDEX(List1, MATCH(0, COUNTIF($D$1:D1, List1), 0)), INDEX(List2, MATCH(0, COUNTIF($D$1:D1, List2), 0))), "")}
View 2 Replies
View Related
Apr 2, 2007
I wish to count the number of entries in a workbook based on the entries in two columns. The columns are for example H1:H100 ( date) and L1:L100 (status). I want to the number of times the date in H1:H100 is over 30 days old, as well as L1:L100 = 'Started' for example.
View 2 Replies
View Related
Oct 24, 2012
Using the following code to remove empty rows based on whether a specific range of columns is empty. The code works if the cell has a zero, but not when the cell is blank. An example of the data is attached.
VB:
Public Sub DelRows2()
Dim Cel As Range, searchStr, FirstCell As String
Dim searchRange As Range, DeleteRange As Range
[Code].....
View 1 Replies
View Related
Apr 11, 2009
I need to filter out rows, based on a specific value in column A, (documents on file for the clients), then check column C (last name) and D (client first name), which can have the same client listed multiple times, based on how many different documents are on file ......
View 12 Replies
View Related
Apr 28, 2009
I'm sure this is simple code, but...
I have a data table with over 20,000 rows that refreshes each day. I need to run a bit of code when it refreshes that says if the value in column R is 2, then delete that row.
View 14 Replies
View Related
Apr 28, 2009
I have attached a sample spreadsheet where I now want to move date from multiple rows to one row and multiple columns where data in A is common, hopefully spreadsheet shows this more clearly. I have shown sample on two sheets, before and after. I want to have all data in a single row for instances where A the same.
View 2 Replies
View Related
Jan 20, 2009
I have a worksheet with columns of Unique Words and corresponding Frequency of Occurrence for several years. I would like to sort the data so the rows match up on same Unique Words across years.
I am using Excel 2007.
View 9 Replies
View Related
Oct 9, 2011
I need to delete rows that are blank, 0, or contain errors (#REF, #N/A, etc). My problem is that once in a while, an error will show up in a singe cell of a row that I need to keep so a simple deletion of only errors/blanks/0 will not work for me.
The two cells I need to check for errors, blanks, and 0's are D and E. There can be an #N/A in col D and a 0 in col E or both D and E can have errors. Blanks will occur in all cells of the row.
I have tried to use the code below but it doesn't do anything, but it also doesn't give me an error.
Code:
Sub DeleteAll()
Windows("Template.xls").Activate
Dim r As Long
For r = 2 To 36500
If Range("D" & r).Value = "#N/A" And Range("E" & r).Value = "#N/A" Then
Range("D" & r).EntireRow.Delete = True
[code].....
View 1 Replies
View Related
Dec 22, 2006
I have a spreadsheet that in column A has either the letters "C", "LP", or is blank.
In Column L it has either numbers 1 through 100, or the letter "D".
What I need it to do is to check and see if the data in column L is "D" and in the same row column A is blank, then delete that row.
Also, if the data in Column L is "D" and the Data in column A is either "C", or "LP", then I need it to change the "D" to "1".
It might be easier to do it separately because once you run the part that deletes the rows that dont have a C or LP then I could probably just do one that says if column L = D then change to 1.
Lets see if I can simplify this for you.
If Column L = D and Column A = BLANK then Delete Row
(this would delete all Ds that dont have the C or LP)
THEN
If Column L = D then change to 1
View 9 Replies
View Related
Oct 13, 2008
I'm trying to compare values in 2 separate columns to see how many times the same value appears in both columns. Ideally I would be able to insert a range function to compare the values in the column "ID 1" against the values in column "ID 2" and return the count of times that a value appears in both columns. For example 2122, 1112 and 1718 appear in both columns and I would like the formula to return a count of 3.
ID 1ID 2
12342122
45671112
89101718
11122678
13144544
15162324
17189987
19201215
21221928
1976
2576
2345
4678
In my actual project I'm comparing 2 columns in the same worksheet. The column are column B with data in cells B2:B10266 against column C with data in cells C2:C18560.
View 4 Replies
View Related
Sep 21, 2012
two things on the attached sheet.
First problem: in column B, I have a formula based on contents of column A. However, the limitations of 7 nested IFs leaves me with errors - I need 3 more IFs. Is there a way around that?
Second problem: I need to show the row of the first (earliest time in column A) and the last (latest hour in column A) record for each name. I've been sorting by name and time, then manually deleteing the rows I don't need. I know there's a better way, but I can't find it!
View 6 Replies
View Related
Feb 18, 2010
I need to filter the following file.
I need to remove all rows where COL A value and COL B value are the same. COL C does not need to be considered. However I need to retain one of the Col C values for purposes of formatting.
The end result should look similar to columns F,G and H!
View 2 Replies
View Related
Mar 18, 2014
I have a spreadsheet with hundreds of rows. Columns C and D contain either TRUE or FALSE. I want to be able to automatically delete the rows where both columns are FALSE.
View 1 Replies
View Related
Dec 5, 2008
I have a workbook in which I have two sheets. One sheet is a report and the other is a data dump. The data dump has headers in in column A starting in cell A6 and headers in row 5 starting in cell B5. There is then data going from B6:J20.
In my report I then I have same setup with headers in column A and row 5. The difference is that the headers are not in the same order as the dump. What formula could I use that would look for the two headers in my report sheet and then match it with the value in the data dump that uses the same two headers?
View 2 Replies
View Related
Jan 29, 2013
a code that will search each cell across 4 columns and hide the row only if all cells are blank. The macro should search columns "b", "c", "e", and "f" to display all rows where at least one of the cells has a value.
Ex.
Col.B Col.C Col.D Col.E Col.F
1. 123 xxxxx 150
2. 56 xxxxx 50
3. (blank) (blank) xxxxx (blank) (blank)
In this ex. row 3 would be hidden.
View 1 Replies
View Related
Feb 3, 2009
I need to insert one or two rows depending on the criteria of two different columns.
We have two shops (A and B)...and the sales are expresed like this: ....
View 9 Replies
View Related
Jan 7, 2010
How do I delete duplicate rows in a sheet using a macro. When I say duplicate row, it is not based on a particular column but all the columns, so it is a true duplicate record.
View 9 Replies
View Related
May 14, 2006
I've been looking through various forums looking for a macro for a particular task, but I have not found something that works yet. Maybe someone could help me out? It's pretty straightforward situation.
I need a macro that removes an entire row when: information in column B and column C are both found in other rows ( duplicates).
I'm dealing with a worksheet with store record information ... Store Name (column B), Street Name (column C), State/Province, etc. I import new store records all the time and many are invalid because they share the same name and street address and therefore need to be removed. The ones that Ive played with unfortunately end up deleting the cells only and not the entire row.
It's a tedious process to do manually remove entire rows (for duplicate column B&C) when dealing with thousands of rows and I would very much appreciate any assistance or insight into how simplify the process with a macro. I've attached a sample of what I'm working with.
View 9 Replies
View Related
Dec 6, 2006
I want to delete the current row if the data on row A and Row B match. Its hard to explain so I posted an example.
View 5 Replies
View Related
