I have a data set with rows of data, with a header row along the top. I want to sort my rows of data by column when the cell above the appropriate column is pressed. I know this seems cumbersome - but it fits in with the sheet. The sheet is protected, and we only want the user to be able to sort in this fashion. My problem is, with my code, I get an error when you select a range of two of the header cells. The case selection on the target.column gets confused. How can I check to see if it's just one cell? Is there a property of a range that reflects how many rows or columns it contains? I tried the following (marked with the ' )just from picking out of the pop-up list of properties of the Target range in SelectionChange, but obviously it doesn't work. My original code is the un-'-ed code.
Private Sub Worksheet_SelectionChange(ByVal Target As Range)
' If Target.Rows = 1 And Target.Columns = 1 Then
If Target.Row = SortRow Then
Select Case Target.Column
Case PriorityColumn
SortData PriorityColumn
Case JobColumn
SortData JobColumn
Case NotesColumn
SortData NotesColumn
Case SupervisorColumn
SortData SupervisorColumn
Case ShutdownColumn
SortData ShutdownColumn............................
I have a table of data (say Column1 to Column 5) with multiple rows.
Column 1 to 4 will have the lookup values in multiple rows and Column 5 data should be picked up using vlookup or other lookup function.
I managed to somehow bring all these lookup values in (Column 1 to 4) in a single column in another sheet. I am now trying to use some lookup or other functions to match this single column and pick column 5 data in original sheet. Result i am expecting is lookup value in first column and next to it column 5 value.
It is basically a lookup wherein lookup value is spread over multiple rows and columns and result column is fixed. I tried using vlookup, but lookup value column and column number had to change every time when i moved from column1 to 4.
I am trying to look through a multiple selection of cells (in Target range) and compare to see if these are Integer. I am failing to be able to cylce through the selected cells and check their value. I am sure it is VB 101 issue... but I am lost at cracking it.
Below is an example from the ozgrid forum illustrating the worksheet change event. Not sure of the meaning of 'Do nothing if more than one cell is changed" on the 2nd row of the code. Does it means that if a value is entered in other cells, the code will not fire?
Private Sub Worksheet_Change(ByVal Target As Range) 'Do nothing if more than one cell is changed or content deleted If Target.Cells.Count > 1 Or IsEmpty(Target) Then Exit Sub If Target.Address = "$A$1" Then 'Ensure target is a number before multiplying by 2 If IsNumeric(Target) Then 'Stop any possible runtime errors and halting code On Error Resume Next 'Turn off ALL events so the Target * 2 does not _ put the code into a loop. Application.EnableEvents = False Target = Target * 2 'Turn events back on Application.EnableEvents = True 'Allow run time errors again On Error Goto 0 End If End If End Sub
One of the fields I want them to enter is a library branch and I have used a data vaslidation list to provide a dropdown box.
To make it act more like a windows drop down box I have hidden 7 cells above this box with the 7 possible entries. This means that with autocomplete, if they start typing in the cell it will autocomplete the entry for them.
This work fine, but if someone presses enter from the cell above my hidden rows, one of the hiddenn cells is selected! WHY!
I have no explanation for this behaviour, nothing like it has ever happened before, and I have no idea how to get rid of it.
In my Macro , i add a worksheet and depending on certain conditions i decide whether to populate it or not.
At a later point of time i am checking if the newly created worksheet is empty or not using the following check :
If ActiveWorkbook.Worksheets(ISheet).UsedRange.Rows.count <> 0 Then
Now what i have noticed is that even in cases where the "ISheet" is empty the above condition evaluates to true for the first attempt. I cannot understand why ?
let me know if the query is ambiguous and i will post the code snippet
I have several columns in an excel sheet which contain values (eg. Names). The entered names can be unique or already exist in the column. I need to find out (using a function or macro) how many different names were entered. Duplicates shshould be ignored in the count.
Private Sub Worksheet_Change(ByVal Target As Range) If Not Application.Intersect(Target, Me.Range("R1C1")) Is Nothing Then 'do something End If End Sub
Now, that Private Sub works fine if you change the value of R1C1 manually or from another macro.
But if R1C1 is the cell linked to a list box, nothing will happen if you change its value by selecting different items in the list box.
I have a range of data and need to summarize some of the data. In the table below is an example of the data. I would like to have a single formula where I can count the number of rows where the end date - start date is < 14 days. I would prefer not to add an additional column for the datediff value. Is there a way to do this with either arrays or named ranges?
Name Start End Other data Verizon 1/10/2010 1/25/2010 AT&T 3/2/2010 4/14/2010
i am needing to issue a dos command in excel? basically i need to send a target link to a file. i cant use a hyper link for several reasons, and this is the only way i know how to go about this.
I'm trying to find a way to take a data set and write an excel equation/s to find out how many times in that column of data a certain result (number or letter) occurs consecutively for more than 5 (hoping that this is also customizable) times. For example....
DATE USER A 1/1/2013 NO
[Code]....
Above are two columns, one with the date and another with the data I'd like to search through. So I'm hoping that I can write an equation/s that tells me how many times a certain value, in this case I'm looking for "No" occurs more than 5 times consecutively in the line of data. For example, for this particular data set, the final answer would be 2. There are only two instances where 5 or more cells with a "No" value follow each other.
On double clicking a cell, I want to unhide the 10 rows below the target.
VB: Private Sub Worksheet_BeforeDoubleClick(ByVal Target As Range, Cancel As Boolean) Cancel = True Range(Target, Target.Offset(10, 0)).EntireRow.Hidden = False End Sub
I thought this could should do it. But it only seems to want to unhide the target row (obviously unhidden anyway as i'm double-clicking a cell in it).
VB: Private Sub Worksheet_BeforeDoubleClick(ByVal Target As Range, Cancel As Boolean) Cancel = True Target.Offset(10, 0).EntireRow.Hidden = False End Sub
This code unhides only the 10th row below the target.
I Have a sheet called "Main" in Which I use a Doubleclick Private function. When the user Double clicks on a row, I want excel to take note of the row number that was clicked, then move to a different sheet and copy the row in the new sheet (Called "Data") with the same row number as the Target row that was Double Clicked.
Private Sub Worksheet_BeforeDoubleClick(ByVal Target As Range, Cancel As Boolean) If Target.Column = 4 Then Sheets("Data").Select Sheets("Data").Rows(Target).Copy Sheets(" Chart Data").Select Sheets("Chart Data").Rows("2:2").Paste End If End Sub
I know The (Target).Copy line is incorrect but I dont know what the correction is.
I'm trying to compare values in 2 separate columns to see how many times the same value appears in both columns. Ideally I would be able to insert a range function to compare the values in the column "ID 1" against the values in column "ID 2" and return the count of times that a value appears in both columns. For example 2122, 1112 and 1718 appear in both columns and I would like the formula to return a count of 3.
In my actual project I'm comparing 2 columns in the same worksheet. The column are column B with data in cells B2:B10266 against column C with data in cells C2:C18560.
I have main worksheet (target a) that I am trying to populate data from target(worksheet) b. The data I am trying to get from target b changes every month,(declining balance) based on a new month. So how can I get financial data from different cell each month from "b" into same cell in "a"? (so "A" # would be overwritten in same cell based on new # from "B". I have tried VLookup but can't be doing something correct.
I am using a piece of track changes VBA code mentioned on this site, which among other things creates a new column that reports the number of any cell that has been changed (e.g., $K$32). What I would like to do is, next to that cell, report the title of the row in which that cell appears. In other words, if someone changes cell $K$32, for easier reference I'd like others to be able to see that this cell appears in a row titled "New Sales". I'll be happy to clarify with more specifics if need be.
I have two strings in two cells, both are dynamic values. I need to plot the values of any of the column that changed in the third cell either the two cells change its values.
I have a spreadsheet with 3 sheets, the first sheet is to be an overview of the entire workbook used to keep track of training,
The last sheet (Called Raw_Data) contains various coloumns, the two I am interested in is the training course and the name, as someone completes a course I record what the course was, who did it and date/time of start/finish,
What I would like to do it to count on the front sheet how many times someone has completed a course
Operational Overview Joe Blogs
Work Pratices Joe Blogs
Incident Handling Processes Joe Blogs
Training Paul Smith
Incident Handling Processes Joe Blogs
From the above table Job blogs should flag in a cell for Incident Handling Processes twice, Is this something that can be done via a formula as I am trying to avoid VBA.
This is a very simple thing that i can't seem to figure out or find the right code in search.
How do i count the number of columns in an excel worksheet? - No selection should be made - If it helps, the worksheet only shows the columns and rows with data, if there are no data there are no columns, something about the Page break view...
I am trying to count how many times a certain value appears in a column. For example how mnay times A81001 appears in column A and compare with column B. I suppose it's Count function?
column A column B A81001A81001 A81001A81001 A81002A81002 A81002A81002 A81002A81002 A81002A81002 A81002A81002 A81003A81003 A81003A81003 A81003A81004 A81004A81004 A81004A81004 A81004A81004 A81004A81005
In my table I have a column called Series and Column called Games.
Now when a user makes an entry the do the following
Enter the Date of a game then a Series # (I wish I could make this auto increment because a series number can never be used more than once.)
then a game number starting with 1 and never going past 3.
Then Bet Team, Home or Away and Vs Team.
Now let it be know if the column called w/L = Win then that Series is over for ever and there will be no more games played.
If there W/L = Loss then I must create a new row for that SERIES with the next game number.
What I was hoping to do is
If I write in the following going in order Date ---4-11-09 Series # ---- 6 It should auto populate Game to the next game # Bet Team H/A Vs Team
I also want it to update my record
C3 is my series Wins D3 is my series Losses
I do not know how to populate that.
A Series Win = during a series game 1-3 where W/L = Win A Series Loss = a series 1-3 where there are no wins. A series does not count as a loss until you loose game #3.
I need to get the count of a string from multiple columns. The problem is that string1 exists in column A and String2 can exist in one of eight columns. See the example below.
What I want to do is use two search criteria. I want to find the number of times I have Type=A and if the row has a case Beta. In the example above I should get an answer of 2. (From rows 3 and 9)
I tried countifs but I cant seem to get it working properly.
I have two columns that represent constituents from a stock indices from two different years. I would like to find out what stocks appear in both years.
I want to have the number of used columns in a worksheet. The information will be used to understand what range the data is in. So for the rows I am using nRows = Application.WorksheetFunction.CountA(myRange). I am hoping to have something similar for the columns.
How can I count all the cell text from different columns?
I have a sheet..that has the well known columns from A to EM, but let's say A to Z (A,B,C,etc).
I want to count all the cells that have text inside from columns: A,C,E,G,I (so, from 2 to 2). But the counting to be for all these A,C,E,G,I, etc columns, and to be put in a cell which gives this total number as info for user.
Hi I have a process in which I have to create a selection without bias. There are 9 categories in this selection process. The 1st and 2nd category already have code and they work differently from the rest. For the 3rd through the 8th categories I have to choose one from the 3rd category, then one from the 4th, etc. After the 8th category I start back at the 3rd and go to the 4th, ect. It ends when cell A1 reaches 30%.
Its a little difficult to explain but the process is simple enough to understand once you see it. I have attached an example of the process. I have also started the code and left explanations within the code.
