I use this code in Column M to convert Column N
Code:
=IF(LEN(N2)>
I am looking to loop down Column N & O and replace , insert colon for both column N and O I started with is code
Code:
Sub FixTimeFormat()
Dim TimeNumcol As Integer
Dim ConvertedTimeCol As Integer
[Code]....
In A1, I've got a time for an event expressed in military time without colons, like 1130.
In B1, I've got two more times expressed the same way, like 1230-1300. These are the time the event was actually began and ended.
I've separated these two times into four different columns, the first two (C1 and D1) containing the raw numbers 1230 and 1330, and the second two (E1 and F1) containing those numbers formatted as times (12:30 and 13:00) via the TEXT function =TEXT(C1,"00:00")
Getting the difference between these two times (expressed in minutes) is not difficult. What is proving to be difficult (however simple it seems) is checking to see if C1 (time event began) is within an hour of A1 (time event was scheduled.) I was able to get this to work with times not involving 0000 or having, say, 0130 as an event time and 2300 as the time the event was started, but those two cases (switching 0000 to 2400, and moving between "days") is causing a hangup. Checking if A1
20081110120000[0:GMT]
is there a way to convert many entries of dates and time entered in the above way into actual dates and times? is it as simple as making a custom format? if so, whats the syntax?
the entries appear to be the year(4 characters), the month (2 characters), the day of month (2 characters), and the time of day (6 characters, AM/PM)
i dont need the time, so the last part ("120000[0:GMT]") isn't necessary.
I have two Columns of 4 digit numbers (24 hour clock format). I need these numbers to be in Time Format. Formatting the Columns or even individual cells seems to do nothing.
1238 as 12:38 etc.
These numbers are acquired using VLOOKUP
I have attached a copy of my file, The numbers in question are on sheet "iCalender" 8th sheet accross.
Columns "start Time" and "End Time"
Time Format is Compulsory so that I can upload to a .ics Web Converter. Of which is currently failing for this reason.
5th January 2014 - Copy.xlsm
Is it possible to enter a 4-digit number (i.e. 1400) into a textbox and have it display 14:00 and have the time entered into a cell?
View 3 Replies View RelatedIs there any way that I can have a column of cells change the entered 4 digit to a time format? E.g. when somebody enters 1212 in a cell it will automatically convert the entered numbers to 12:12
View 9 Replies View RelatedI know you can take a number from one cell and combine it with number from another cell and make it one number. What I need to do is the reverse. Take a two digit number in a cell and separate it into single digits in two cells. If you have the number 50 in a cell, then is there a formula that will take the 5 and put it in cell and take the 0 and put it in the cell beside it?
View 4 Replies View Related="autECLSession.autECLPS.SendKeys """&B4*100&""""
B4 is 3.00% and I need it to be 03 no %, 3.00%*100= 3 but I need anything less then 10 to be two digits still (1-9)
This would be the perfect end result:
autECLSession.autECLPS.SendKeys "03"
and for over 10
autECLSession.autECLPS.SendKeys "10"
How to calculate a check digit in excel. The details to calculate this are as follows:
All variables in the calculation are positive integers.
We take each integer of the pro number and multiply it by a value and sum them to get a total.
An Example: 8 Digit Pro Number: 66988757
Pro Number: 6 6 9 8 8 7 5 7
Position in the Pro Number: 1 2 3 4 5 6 7 8
Multiply each digit in the pro number by (10-position) in the number, to achieve a sum.
Using our example pro again:
6*(10-1) + 6*(10-2) + 9*(10-3) + 8*(10-4) + 8*(10-5) + 7*(10-6) + 5*(10-7) + 7*(10-8)
6*9 + 6*8 + 9*7 + 8*6 + 8*5 + 7*4 + 5*3 + 7*2
54+ 48+ 63+48+40+28+15+14 = 310
Take the Sum of the previous calculation and divide it by 11
310/11 = 28
(Actually, it's 28.181818, but since we're working with integers, we truncate everything behind the decimal).
Figure a remainder by multiplying the quotient by 11 and subtracting from the sum.
Remainder = 310 - (28*11) ---> Remainder = 310 - 308 ----> Remainder = 2
Check Digit = 11- Remainder
Check Digit = 11 - 2 ---> Check Digit = 9
Note: if the check digit is 10 or 11, need to subtract 10 from the Check Digit.
I have a cell with 10-digit number. The sixth and seven digit gives me information that I want.
I want to be able to somehow use a formula to get the sixth and seventh digit for about 300 cells...rather than doing it manually.
I have a long list (+1000 entries) of numbers (that actually represent dates) in cells one under neath another.I need to get them into date form so i can arrange them from earliest to latest.
Kind of looks like the following:
Cell1 - 1122005 (which i supposed to represent 1/12/2005)
Cell2 - 10192005 (.......................................10/19/2005)
Cell3 - 9282005 (.........................................9/28/2005)
Right now Excel just sees a bunch of numbers and does not know what to do with them.
I need creating a tool for numerology.
Every alphabet from a to z has a number associated with it.
A = 1, b 2 , c = 3 etc
Numeric Values for Each Numeral
A1N5
B2O7
C3P8
D4Q1
E5R2
F8S3
G3T4
H5U6
I1V6
J1W6
K2X5
L3Y1
M4Z7
I can either use excel or access or write this.
Example 1 , r = 2 , I = 1, L = 3. .
If I write RIL in column 1 , column 2 should say 213 and column 3 should add 2+1+3 and display 7.
Example 2:
Col 1 = Infosys Ltd
Col 2 should say 1587313 344
Col 3 = 1 + 5 + 8+ 7+ 3+1+3 3+4+4 = 39 , 3+ 9 = 12 , add 1+2 = 3
I am trying to insert a macro to send myself an email when ever someone uses my spreadsheet (I'll embed the code in an existing macro).
The reason for this is to not only gauge who/how many people are using it but also make sure no one is using it externally (I suspect people are passing it on to people outside the company which they are not supposed to). I need it to be covert so I don't tip them off and they don't start circumventing this check.
I have found the below which works well, but I wanted to see if there could be some additional checks to better conceal the sending of an email.
Can I also somehow check the Outlook status to make sure it is working "online" so the email doesn't sit in their Outbox if they are not connected to the network/LAN?
Code:
Private Sub Workbook_Open()
Application.DisplayAlerts = False
Dim oApp As Object 'Outlook.Application 'Object
Dim ns As Object 'Namespace
Dim fldr As Object 'MAPIFolder
Dim mItem As Object 'Outlook.MailItem
Dim sendTo As Object 'Outlook.Recipient
Dim bOutlookFound As Boolean
[code]....
I need to covert a word document to excel.
View 9 Replies View RelatedWill some one guide me, How can i covert my currency (Rupee) in to Million?
(2700000 Rs Into Million with formula/automatically)
Secondly,
Can i make in a specific cell 4 colums & 2 rows ? Is it possible. ?
I have searched all through the threads but I can't find anything similar to my problem. I am trying to create a checkbox that when the excel file would be saved as a *.csv file, the value for the checkbox would be saved as an boolean value 0/1. I created a macro that would populate the cells with the form control checkbox and linked it to the respective cell, I just need to change the value.
View 9 Replies View RelatedI've tried searching the forum here, but have not seen anything like my problem as follows:
I would like to convert the numeric value in a cell to a coded alpha
the numbers 1,2,3,4,5,6,7,8,9,and 0 would be coded as B,L,A,C,K,H,O,R,S,E respectively.
For example, if cell A1, held the value of 5750, the formula in cell A2 would result in KLOE.
The figures in Col A would be no smaller than 3 digits nor larger than 5 digits.
I would like to convert a number to minutes. For example .48 or 48 as a formula result to 48 minutes. The reason for doing this is I will add the result to a time.
Forumula result = 48 -> convert to {48 minutes + 12:00 = 12:48}
I've tried using just formating but no luck.
I have a 22x22 matrix with correlations; I want to extract the lower traingle as a single row; so my matrix is
# r1 r2 r3 r4 r5 etc
r1 1 0.5 0.3 0.7 etc
r2 0.5 1.0 0.5 etc
r3 0.3 0.5 1.0 etc
r4
r5
etc
I want my row to be
r11 r12 r13 r14...r1-22 r21 r23 r24 etc..
I have two columns of data, one for Position, and one for description.
The positions are concatenated and separated by spaces. E.g. C1 C2 C3 for each Description. I need to create a separate row for each position
So I need to convert:
Pos Decscription
C1 C2 C3 Cap 100n 10% X7R 0805
to:
Pos Decscription
C1 Cap 100n 10% X7R 0805
C2 Cap 100n 10% X7R 0805
C3 Cap 100n 10% X7R 0805
Or in other words split a space delimited string into an array, so that I can loop through the array, and add new rows
I need to formula to covert duration between start date and end date to units below.
Start Date
End Date
Number of Month
Number of Years
Number of Days
6/1/13
8/31/13
[Code] .........
Covert number to Date 20131126 to 11/26/2013
View 7 Replies View RelatedHere is the image 1 after selecting one of element in listbox and then if I click delete material (commandbutton).
It has to delete the select material in sheet 2 and has to cut the element below and move to 1 row above as shown in figure 2.
At the same time it has to delete the entire respective column and remaining column has to be cut and place in column before in sheet 3 as shown in figure 3
For that I had wrote the program which is below
Private Sub CommandButton5_Click()
Dim i, j, k, m, n As Integer
i = ListBox1.ListIndex
j = Sheet2.Cells(1, 39).Value
k = j - i
[Code] ....
When I click the delete commandbutton5 the result is as shown in figure below
In sheet2
In sheet 3
For loop is running only one time after that it got terminated. If I split the 1st for loop and execute it.it is running nice what I meant to do. If I combine another for loop or If I add msgbox at top it misbehaving. I tried with do while loop also it also doing same thing.
I have created a macro to calculate data and add it to sheets over sheet 3. It has to do this for any number of sheets above sheet 3.
Below is the code i have created i am just getting an error at runtime which i dont know how to resolve or what i have done wrong
So say you have a loop running a large number (on the order of 1 to 10 billion loops) and you want to exit after some amount of time x, what is the most efficient way to do this?
doing something like:
Code:
stTime=timer
do while timer-stTime < x
*do stuff*
loop
is slow...
i also could approximate the time per loop and only check when the counter passes that general area...but i dont want to use a counter either
I am running regression statistics for several different columns of data. In order to help me analyze the data, I am organizing the output on a specified worksheet called "Best Subset." I have stored the column names of the data used in different regression calls in a range array called Reg_Labels. The Reg_Labels array may contain one, two, or sixteen column labels in one specific location (where each column label is stored in a separate cell). All possible column names are stored in the Labels array (each name is stored in a separate location). I basically need to check to see which column names were present in a particular array location in Reg_Labels. When a column name from a cell in Reg_Labels(I-1) matches a column name from Labels(K), I am placing an "X" on the designated spreadsheet to indicate which variable(s) has been used.
My For..Each Loop will not work for some odd reason, and I need to figure out why. I keep getting an error that an object is required. I need each cell in Reg_Labels(I-1) compared with Labels(K), and I thought the For..each loop would be the easiest way to do it.
I just don't understand what's going on if C is a range object and Reg_Labels(I-1) is a range object. Wouldn't this loop supposedly cycle through every cell in Reg_Labels(I-1)?
Have I messed up some sort of object reference? ....
I have a column of 6 digit numbers in excel, and I need to remove the last digit from each number, turning it into a 5 digit number. No rounding, just simply remove the last digit. Each number is different. Does anyone know how to quickly and efficiently remove the last digit from each number? I can convert to alphanumeric string if need be...
View 4 Replies View RelatedI need a macro where I can highlight a column and change all of the 2 digit years to a 4 digit year (actually, some of the 2 digit years are only 1 digit, e.g. "9" instead of "09").
I have an if then statement that I can use in the column after it, but I'd rather change the actual numbers in the original column, rather than adding another column (and having to keep the original, too).
The statement I had was:
=if(A1>=50,1900+A1,2000+A1)
I just copy dragged down to get the cell numbers for the rest of the column... but using A1 was just for an example, here, it's not necessarily going to be in that column. It needs to be just whichever cells I select.
It seems like it should be pretty simple, but I don't know how to word it in a macro.
Starting Column Example:
12
13
14
99
11
[Code] ......
For some reason I can't get rid of the borders...
compare two lists of data in order to identify the possible matches considering date&time and the location stored in different columns as shown in the example file attached. The range of date and time for the comparison is one hour, but it can be changed...
View 4 Replies View RelatedFormula to calculate time allotted minus time used and show the difference in hour and minute.
View 1 Replies View Related