Create Matrix Of Data Automatically

Jan 30, 2013

I have 2 types of data: Product & Store

And the data would go like this:

A
Corn Flakes
Frosted Flakes
Froot Loops

B
Store 1
Store 2
Store 3
Store 4

The number of entries of course is a lot bigger, that's why I'm trying to make it auto.

So what I need is to have a table created that would mix both data type in 2 columns, like this:

Product
Store

Corn Flakes
Store 1

[Code]...

How would this be done automatically by a formula?

View 9 Replies

Create New Table (or Matrix) From Exported Set Of Data From Website

Jun 19, 2014

I have a set of exported data from a Project Management SW (activecollab). The result is an excel .xslx file with a table inside with a lot of cells I am not going to use. Additionally, what I would like to do is creating new tables on other sheets that use only the data I want from the export. For example, I have two projects and three employees. I want to create three tables with the names of the three employees. In each table I want the tasks done by them and the time they will spend on them in order to create a Gantt chart. I need a solution that allows me to create new tables with selected data from a bigger cluster (the export). you do not need to give me the exact solution, I only need to know whether it is possible or not and where could I get the info to do what I want.

View 1 Replies View Related

Create Matrix From A Matrix

Apr 29, 2013

Below there are all the information needed to understand my problem.

M(1 to R,1 to C): matrix with R rows and C columns [element known]

M(i,j): elements of the matrix M in position i(row)-j(column) [element known]n

View 3 Replies View Related

How To Create A Risk Matrix

May 1, 2014

I'm trying to create a risk matrix like the attached example. I want to be able to enter a value and to have it to appear in the right quadrant.

View 2 Replies View Related

How To Create Block Matrix

Feb 12, 2013

I'm struggling to find the right Excel functions to fill up a block matrix. Here are all the details of my problem.

I have a list of firms and relative products. Each firm can produce either 1, or 2 or 3 different products, for instance

firm A produces product x
firm B produces products y and z
firm C produces product j
firm D produces products k, h and q

Suppose the data appear on a sheet in column order, that is, one column for the firms and one for the products with a space between A, B, C and D when one firm is a multi-product producer. I need to create a 0-1 block matrix in Excel setting 1 when the product is produced by the same firm and 0 otherwise, i.e. for the above example

x y z j k h q
------------
1 0 0 0 0 0 0
0 1 1 0 0 0 0
0 1 1 0 0 0 0
0 0 0 1 0 0 0
0 0 0 0 1 1 1
0 0 0 0 1 1 1
0 0 0 0 1 1 1

I can do this in VBA but not in Excel, and unfortunately I need to provide an Excel solution.

View 3 Replies View Related

Create Matrix From Another Table Of Values

Dec 26, 2013

I have a Table of multiple values. From this table, I need to lookup and match the corresponding value in another table, and return a "X" if the looked up values match.

For example: The table with the data in it is:

Apple
Bob

Candy
Bob

Cookie
Bob

Donut
Bob

Figs
Bob

The Table I need to create is: As follows: It will have Bob in the Top column, and the rows to the left of Bob will say, Apple, Asparagus, Candy, Cookie, Dancing, Donut, Fame, Figs, Zebra. I need to read the top table and populate with an "X" the values which have Bob.

View 9 Replies View Related

Automatically Create List / Table From Data That Changes Often

May 30, 2013

I have a client list/table that gets new data each day. (ALL) - see file

I need to create separate lists/tables on new sheets from the main data sheet (ALL) base on certain conditions/criteria...

On the (ID) sheet I need all the clients that have ID numbers to display, on the (Reg no) sheet I need all the clients with Reg numbers to display... etc.

Like I said that the main data sheet grows each day and the lists/tables on the other sheets needs to automatically include all the new clients that's entered.

Is there a way to do this using formulas or do I need code to do this?

View 2 Replies View Related

Automatically Create Set Of Charts From Block Of Data

Jul 12, 2012

I have a quite big database as a result of a study in Excel 2010. There is a special block of data for every participant in the study, including 16 data series in 16 lines. I have to make a unique chart for every line.

One block is bulid up in a way, that every row is the input for a chart, with the exception of one "spacer" row, which is empty.

Name
1 2 3 4 ...
A
B
C

D
E
F

For example in the sample above, there should be 6 line-charts (A, B, C, D, E, F) next to the block.

Can a macro be written, so I can automatically create the chart-set by selecting the block's upper left cell and running the macro? Or is there any easier method?

View 5 Replies View Related

Create Matrix Of Pricing By Conditions From Tables

Aug 21, 2008

i have many tables for many carriers with the same format, and i need to create a unified table of them, the tables look like this

-------A---------------------B-----------------------C---------
----Destination----------Country_Code-----------Price_Per_Minute
1------UK-------------------4479-------------------0.256-----
2------USA------------------1148------------------0.300------
3------Jordan----------------9626------------------0.899------
4------India------------------9198------------------0.345------

so let us consider that these are the prices for X company and i have another ten tables for other 10 companies, what i need to do is to create a unified table that includes all the companies prices for all the destination depending on the Country_Code as it could be considered as a primary Key and without any duplications and to include the all the data in all the tables as some destinations and prices are not available in all the tables, so the tables contains different data, the unified table should look something like this

-------A----------------B----------------C------------D---------E------
----Destination-------Country_Code-----X Price-----Y Price----Z Price----
1------UK-----------------4479-----------0.256-----0.254------0.356----
2------USA---------------1148------------0.300-----0.876------ ---
3------Jordan-------------9626-----------0.899------0.987------0.324---
4------India---------------9198-----------0.345----- -------0.564--

View 6 Replies View Related

Automatically Create Monthly Totals From Daily Data

May 20, 2014

I am trying to do an automatic input with my daily total sales.. i did it in total but my problem is i don't know how to make the date change.

View 2 Replies View Related

Automatically Create Monthly Totals From Daily Data

Jan 2, 2009

In column A I have dates, in column B I have data.

What I am trying to do is get the monthly totals from the data so instead of:

01/02/08 - 52
06/02/08 - 87
14/03/08 - 23
12/13/08 - 12

I would get:

Feb 08 - 129
Mar 08 - 33

View 6 Replies View Related

Create Single Input Sheet That Automatically Feeds Data?

Jul 9, 2012

I am trying to create a single input sheet that automatically feeds data into several other worksheets within the same workbook. Some of the sheets use the same data, some are completely independent of each other. The point of having this is so that users can go in, fill in the input sheet, and the other sheets will automatically be filled with data from the input sheet.

View 1 Replies View Related

Userform To Automatically Create A Graph From The Data That Is Shown In The Worksheet

Jul 4, 2006

I want to do is use a userform to automatically create a graph from the data that is shown in the worksheet. The data in the work sheet will grow and shrink all the time. Am i right in thinking I am meant to create a dynamic range? I know how to do it but am not too sure what I am meant to be naming. And secondly I am not too sure how I set up the button to produce the graph.

View 4 Replies View Related

Creating Adjacent Matrix From Incidence Matrix

Aug 26, 2007

I have a data chart on 200 people with overlapping membership in 20+ groups, represeted as binary (1=member, 0=notmember), for example: ...

View 9 Replies View Related

Return Inverse Matrix Of Large Matrix

Aug 22, 2008

Using VBA, I wish to work out the inverse matrix of a large matrix (100*100), but keep getting the # Num! Error. I am using the minverse function. I have defined variable as "variant", does this give me the same possiblities in terms of number size as the variable "Double"?

View 9 Replies View Related

Create Unique List From Matrix & List Frequency Of Each Occurrence

May 23, 2009

I've searched the forum and believe this thread to be the closest to what im looking for, but its doesnt completely apply: matrix to list conversion. I have an attachment to support my questions (see attached). I have a matrix of words (strings) that contain repeating and non-repeating contents. The matrix also has spaces which are of no value. Essentially, the VBA needs to ' analyze' this matrix and create a consolidated frequency list (as shown in the file).

The matrices are HUGE and therefore some of the clumsy VBA i am using is turning out to be a bit inefficient. The file also contains formulas and such that I cannot use AutoFilter nor can I use Insert or Delete rows...so the VBA shouldnt use those either.

View 6 Replies View Related

Making Report And Show Data From Matrix With Header And Data?

Jul 4, 2014

I added an attachment with an example. You will see a matrix, with in the most left column an ID, then the headers of the matrix has different numbers that mean something.

What I want to do is, you fill in a number in the combobox, then press on a button and a report will be made on a new worksheet. With a list of the numbers and dates in the matrix that the ID has. Like shown in the example sheet in the workbook.

View 1 Replies View Related

Convert Raw Data Matrix To Multiple Column Data?

Sep 6, 2012

Here's a sample of the document I have, the original has several thousand entries, so figured for the sample I'd limit it. The raw data is on sheet 1, and sheet 2 is what I want to have to more easily manipulate the data. I started doing it manually, but I'm sure there's a far better method that I just don't know about yet. sample.xlsx

For those that don't want to download the document:

My data is like this:

ID1 Field1
ID1 Field2
ID1 Field3
ID2 Field1
ID2 Field2
ID2 Field3
ID3 Field1
etc.

What I want is this:

ID1 ID2
Field1 Field1
Field2 Field2
Field3 Field3
etc.

View 2 Replies View Related

Extract Data From Matrix

Jun 22, 2008

I'm running a small messenger company and I've got a geographic area divided into five zones: 1,2,3E,3W,& 4

Deliveries within 1 zone will be charged for one zone.
Deliveries from Zone 1 to Zone 2 will be charged for 2 zones. Etc.

I've got a list of zones in my From column and also in my To column.

I need to write a formula that will give my customers the Zones Charged in a seperate cell.

I learned how to do something like this back in school, but don't even know what to call it anymore. Maybe it's some kind of comples IF function.

FREE Deliveries to anyone in Long Beach, CA to the winner!!!

View 12 Replies View Related

Finding Data From A Matrix

Feb 17, 2009

On my example sheet it shows how many cables and how the cable length per job. What i need is for the hour/job column to be populated from the Hours sheet by matching the column and row. e.g 4 cables at 40 metres would give me cell D7 (27.89), as 25 metres would be no good - so rounding up would be required.

View 2 Replies View Related

Turning Data Into Matrix?

Oct 18, 2011

I have 2 lines with pairs and 3rd with corresponding values, nee to construct a matrix out of it with formulas

Example
Need to turn

AAABBDBCDCDC0.30.20.130.550.840.43

into

ABCDA11-0.31-0.21-0.13B0.311-0.551-0.84C0.20.5510.43D0.130.841-0.431

So the one that stands above in the initial file goes to the top line in the matrix. 2 line -> column in matrix. In case there is no match need to seek reverse in 1,2 and reflect as 1-VALUE in the matrix

View 3 Replies View Related

Plot Data To Matrix

Aug 17, 2008

I have an Excel file with a sheet that has the following columns: Name, Activity, Start Date,
End Date. What I would like to do: I would like to create summary sheet with a calendar-like
matrix, with the names as rows, and dates as columns. I would then like to plot the activity in
the corresponding dates (based on the start and end date). Note: If there are schedule
conflicts, the conflict should show up in another row

- Is this even possible to do in Excel?

Source:
Name Activity StartDate EndDate
PersonA Vacation Jan1 Jan3
PersonA Office Jan4 Jan5
PersonA Field Jan6 Jan7
PersonB Vacation Jan1 Jan3
PersonB Field Jan4 Jan7
PersonB Office Jan5 Jan5
Summary:
Name Jan1 Jan2 Jan3 Jan4 Jan5 Jan6 Jan7
PersonA Vacation Vacation Vacation Office Office Field Field
PersonB Vacation Vacation Vacation Field Field Field Field
PersonB Office

View 9 Replies View Related

Matrix - Identify Cell Content In Column For Row If Matrix Content True?

Mar 21, 2014

For a table like the one below produced for the sake of example (actual is much much bigger) I want to make it list rows that are true for a certain column for a certain variable in the matrix. So for say water terrain, which types of activity can I do i.e. swimming. Or for Offroad the activites which I can't do i.e. Run and Swim.

ActivityWaterRoadOffroad
Jog nym
Run nyn
Walk nyy
Swim ynn
y=yes
n=no
m=maybe

View 10 Replies View Related

Pulling Data From Cells Into A Matrix?

Jun 22, 2013

In VBA I'm trying to grab numbers from a cell range (ie: A1:A10), and save them to a matrix or variable. I will later need to grab additional numbers and add it to that matrix. I have experimented several different ways, but belows demonstrates what I'm trying to do:

VB:
my_data = Range("A1:A10").Value
my_data = my_data&Range("B1:B10").Value

View 2 Replies View Related

Formula For Pulling Data From A Matrix

Nov 21, 2006

Im currently working to speed up my monthly reporting process. Each month I pull data from the ledger by account & office. Below is an example of what the format of the ledger looks like.

My next step is to report the amounts by account number for each office. At the moment I do this manually, which takes a very long time. My goal is to be able to paste the ledger data on a worksheet and have my report populate automatically.

In regards to the account numbers from the ledger, we summarize the accounts using the first 3 digits of the account. For example, account number "1113454" would be considered a "111" account. Account number 3335454 would be considered a "333" account.

************************************************************************>Microsoft Excel - 3Q Global Variance Analysis.xls___Running: xl2000 : OS = Windows XP (F)ile (E)dit (V)iew (I)nsert (O)ptions (T)ools (D)ata (W)indow (H)elp (A)boutB16C16D16E16F16B22E22B23E23B24E24B25E25B26E26=
ABCDEF1Ledger2******3*Office*1Office*2Office*3Office*4Office*54*SEP-06SEP-06SEP-06SEP-06SEP-065Account*Number*****6111234127.00766.004,446.007,865.005,509.00711135433,000.0034,566.0099,433.00100.00471,612.76811167645,677.009,898.002,212.0034.00877.00911190932,445.00466.0043,435.00343.005,665.00101118881,876.00433.006,566.00900.0020,398.4411113454121.0032.00900.0075,329.3222.001211345517,678.005,443.00434.00233.0064,556.00133331115,658.00875.00222.0032.00654.001433350090,932.007,634.00122,246.002,134.0055.0015333009123.00543.00990.009,005.00888.0016Sum227,637.0060,656.00280,884.0095,975.32570,237.2017******18My*Report*19******20111*Balance*113*Balance*21OfficeBalance*OfficeBalance*22Office*1113,125.00*Office*117,799.00*23Office*246,129.00*Office*25,475.00*24Office*3156,092.00*Office*31,334.00*25Office*49,242.00*Office*475,562.32*26Office*5504,062.20*Office*564,578.00*27******Ledger*
[HtmlMaker 2.42] To see the formula in the cells just click on the cells hyperlink or click the Name box
PLEASE DO NOT QUOTE THIS TABLE IMAGE ON SAME PAGE! OTHEWISE, ERROR OF JavaScript OCCUR.

View 9 Replies View Related

Matrix - Need Data Sorted Into Lists

Mar 9, 2008

I have a matrix of mixed numbers (going across many columns and rows) in Sheet1. They are a mix of positive and negative numbers, In Sheet2 I need 2 lists to be automatically displayed, taken from the data in Sheet1.

The first list (column) is for positive numbers only, the second is for negative numbers.

There is one filter: only numbers over a specified value (for the positive list) must be used from the data, and only numbers under a specified value (for the negative list) must be used from the data. The 2 filters can be stored in any cells in Sheet2 (the worksheet where the lists will be), lets say, for ease of use, A1 and B1.

But here's the tricky part: I need the location reference of each number in the matrix displayed next to the number in the list!!! Eg: in the matrix, I have names running down the left (A2 to A25) and the same names in the same order running across the top (B1 to Y1) - just like any basic matrix! If A6 is called "John" and L1 is called "Pete" and their value (at cell L6) is 10, then I need them to be displayed in the "positive list" amongst the others (sorted automatically into numerical order) with the words "John" in the cell to the right of the score, and "Pete" in the one after that to the right: so it will look like:

A2 B2 C2
10 John Pete

(remember that these 2 lists are on Sheet2, not on the matrix worsheet! A1 and B1 contain the 2 filters for the positive and negative lists).

Of course, this must only happen if the filter in A1 (the positive filter) is 10 or under. If it was anything above 10, then this one would not make the list.

As for duplicates in the matrix coming up twice in the lists, that's not a problem this wont matter! It's ok for the lists to have constant duplicates displayed eg: 10 John Pete will also have next to it 10 Pete John.

View 9 Replies View Related

Distance Matrix For Multivariate Data

Aug 7, 2006

I have a multivariate dataset with a large number of cases. eg. 50.000 cases (data points) and 40 variables. I need to calculate the distances between each pair of data points in this 40-dimensional space. Obviously i cannot produce a whole data matrix, which would have to be 50.000 x 50.000 big. but i need at least the average distance - if N is the number of cases there are (N*N-N)/2 possible pairs of points. Idealy, the (N*N-N)/2 distances could be placed in a column so i could make a histogram of the values. Still this doesn't seem like a very good solution as the (N*N-N)/2 distances if N=50.000 would fill about 75 worksheets!

Here is a simplified exaple of what i want to do, but with N=4 and only 3 variables:
original data:
IDv1v2v3
1103010
2202510
3202020
4402015
Distance matrix:
1234
10 11,1803398917,3205080832,01562119
211,18011,1803398921,21320344
317,32 11,18033989020,61552813
432,01 21,2132034420,615528130

View 2 Replies View Related

Compare Blocks Matrix Of Data

Aug 29, 2006

I have the follwing data in A1:T17

3,4,7,9,10,11,21,32,33,35,37,41,47,57,60,64,69,72,74,75
4,6,9,10,12,13,15,21,22,31,35,47,49,52,56,63,64,72,74,75
4,6,9,10,15,21,31,33,34,41,42,45,46,47,57,60,68,72,74,78
3,4,6,10,11,13,18,21,30,32,33,35,46,53,60,67,69,74,77,78
6,9,13,16,21,22,31,46,48,49,52,61,63,64,69,70,71,75,78,79
3,4,7,10,14,17,18,21,28,31,33,36,37,43,47,57,65,69,75,80
4,7,13,15,17,25,29,32,37,42,45,47,50,57,60,64,68,71,72,74
3,7,10,11,16,18,28,34,35,43,47,51,52,55,56,57,60,64,71,72
8,9,10,12,16,21,22,28,38,47,49,51,52,53,54,55,64,66,71,72
4,5,6,9,12,15,19,20,30,34,35,38,45,47,54,56,63,65,72,78
5,6,9,12,15,21,26,31,32,43,44,47,64,66,67,68,69,74,75,80
..................

I want to compare the first set of 20 numbers (A1:T1) with the second set (A2:T2) and check how many numbers match. ** If the matched numbers
are >=10 ** then list them to the right of cell W1. In this example, 10 numbers matched are 4,9,10,21,35,47,64,72,74,75. List them in W1:AF1.

Now compare (A1:T1) with (A3:T3). In this example, 11 numbers matched 4,9,10,21,33,41,47,57,6,72,74 list them in W2:AG2.

Now compare (A1:T1) with (A4:T4). 10 numbers matched 3,4,10,11,21,32,33,35,60,69 list them in W3:AF3.

Compare (A1:T1) with (A5:T5). Here only 5 numbers matched 9,21,64,69,75 (Which is ** less than 10 ** - does not match the criteria) DO NOT LIST
this.

Compare (A1:T1) with (A6:T6). 11 numbers matched, 3,4,7,10,21,33,37,47,57,69,75 list them in cell W4:AG4.

.................

Sub Compare()

Dim r As Integer, rr As Integer, c As Integer, cc As Integer, opc As
Integer, opr As Long

opr = 1
For r = 1 To 16
For rr = r + 1 To 17
opc = 23
For c = 1 To 20
For cc = 1 To 20
If Cells(r, c) = Cells(rr, cc) Then
Cells(opr, opc) = Cells(r, c)
opc = opc + 1
End If
Next cc
...............................
Next r

End Sub
The above code runs fine but If I increase my rows from 17 to 1200 it takes 3 1/2 hours to complete. Can it be reduced?

View 9 Replies View Related

Merging Columns And Rows Of Data Into A Matrix

Aug 3, 2014

I've been trying unsuccessfully to find a way to merge data into a matrix, but can't quite figure out a way to manage it. I have a list of employees in column A, in the list there are employees, many with multiple instances, and in columns C onwards there are dates in dd/mm/yyyy format.

Each line represents the number of nights in a trip, from 1 to 35 nights and the start to finish dates. Where as some employees may only have one row with one date others may have 20 rows with between 2 to 35 dates.

I'd like to merge this into a matrix with one line for each employee showing which nights in the year they were away (tab matrix) which has a day of the year to illustrate which employees were away on which nights of the year.

I've uploaded an example to highlight what I mean.

I've tried a pivot and an index match formula but couldn't get either to work.

View 7 Replies View Related

Pick Up The Data From The Highlighted Matrix In The Frame Tab?

Dec 7, 2013

In the attached on the quote tab in cells G5 & H5 i have two formulas both trying to pick up the data from the highlighted matrix in the frame tab.(i only need one)

From the dropdowns in cells F1, F3 & F5 in the quote tab I wish to get the data from the matrix in the frame tab cell range C3 - F20

View 5 Replies View Related