This link worked perfect for my needs: Create a List of Hyperlinked Files: But is there any easy way to only show the filename insted of the full path for the name of the hyperlink? Now it shows it like :C:MyDocumentsTestings est1.xls I only want it to show as: test1. I still want the hyperlink to work
How can i get excel to create a custom unique number using the first three (or two) characters from another field and then adding four unique numbers to the characters.
basically heres the info
Field H2 contains the characters "ACS" so i would want another field to create a unique code to include something like "ACS1234" and to continue to the next row would be the first three characters of field H3 then 1235.
I have a master sheet with allot of columns. I want to be able to cut the data in seperate tabs.
I would like to have a formula to create a unique IDs to easily pull the information I need. If column Type and Vendor are the same I want the number in the Unique ID to repeat. The info on the master sheet can be sorted at any time.
Unique Id Type Vendor Commission-1 Commission Microsoft Commission-2 Commission Google Commission-1 Commission Microsoft Commission-3 Commission Netflix Commission-2 Commission Google
I need to create 50-60 bingo cards for my sister's bridal shower. I wanted to create these using excel. I need to create unique cards so that not everyone bingos at the same time (I only have so many door prizes to give away!)
The basic setup is this: under "B" there are 5 spaces, and each space must have a unique number between 1 and 15 (no repeats). Under "I" there are 5 spaces, and must use a unique number between 16 and 30, "N" has 5 spaces using a unique number between 31 and 45, "G" has 5 spaces using a unique number between 46 and 60, and "O" has 5 spaces using a unique number between 61 and 75. A sample card is below:
I have a number of text columns, side by side in a worksheet, containing names. I wish to combine these columns into one new column, removing any duplicates, to create a single list of names. Is there a simple way to do this?
I have 12 Cells, years 1 to 12. I want to create a random number for each cell, which then depending on what the number is, either 1-75 being 8,000,000 or 76-100 being 10,500,000, place it in the cell and be able copy it down. What i have done already you can see on the attached workbook, or the table i used:
I used this table to generate the random number to give either 8m or 10.5m, except i put the VLOOKUP in the year 1 cell, added some dollars signs and copied down but that only makes them all the same, so i want a way to make each year have its own random number preferably without making 10 tables.
So far I created code that creates a Distinct Unique item's list for one column. It works as it should but I want to modify the code to create a Distinct Unique item's list for two columns that are related to another i.e. a person's name to their license #.
Here is the code below that works for one column only:
I have a list of project numbers that is over 7000 rows long [example attached]. Many numbers are repeated. This list comes out of a financial reporting system. I need to extract a list of unique numbers in numerical order. I have two solutions working, one with SUMPRODUCT formulas and one with MACRO. Here's the MACRO solution. But it takes about 20 seconds to execute. I am just looking to cut down on execution time. I am using this macro a few times on different lists in the same program. Is there a better [faster] way to do this?
I am trying to create a macro that will create a unique list of the values in the same column across 5 worksheets, "Question1", "Question2", etc, and place the list in a new worksheet, "Summary".
The values are in column A in all of the worksheets, and the number of rows in each worksheet will change each day. I need the unique list to be added to the sixth worksheet, "Summary".
Also, after the list is created on the Summary worksheet, I need a count of each field by worksheet and a total. This is how I currently have the Summary set up:
Part Type|Total|Question1|Question2|Question3|Question4|Question5 Name|=SUM(C2:F2)|=COUNTIF(Question1!$A:$A,A2)| =COUNTIF(Question2!$A:$A,A2)|=COUNTIF(Question3!$A:$A,A2)| =COUNTIF(Question4!$A:$A,A2)|=COUNTIF(Question5!$A:$A,A2)
I'm needing to generate a unique random value for a database with 3546 cases. The unique random values cannot be duplicates of each other. I tried the =RANDLOTTO function that I learned of in an old post on this board, but that results in "#NAME?" appearing in the first cell. I tried to install the Add-Ins (both the Analysis ToolPak and the Analysis ToolPak - VBA, but nothing seems to happen. Is there another way to generate these numbers?
Any way in ms excel to create unlimited unique validation list. i am working on a small data where one colums data(Validation list) changes on the selection of previous column data filed. i am using indirect function with defined name range. but ms-excel is not accepting new names now and still i have 75 datagrops left to define and validate.
is there any formula or vba code to fix this problem.
I have a list of sales events that ran at various venues, together with how many people attended and how much revenue was brought in by sales. This data is arranged by week. One venue will never have more than one event per week, but different venues may have sales events on the same week.
My table looks like:
In reality this list could be thousands of rows long.
“Event week” is the calendar week of the event. “Weeks open” shows for each event how many weeks that venue has been open (may or may not be useful!).
What I need to do is to be able to pick a number of weeks (preferably changeable by entering into a cell) and have a list produced of each venue that has run for at least that many weeks, and the sum of people and sales in those first X weeks. My idea of output, if the user input “2” as the number of weeks would therefore look something like:
Note that 1)only venues that have run at least 2 meetings are shown in the output 2)even if venue has run over 2 meetings, only people and sales figures from the first 2 are summed up and displayed.
In this case. Later on I need to produce a frequency chart/histogram grouping the results into categories, but I know how to do this as long as I can get to the step before – but wanted to mention it in case there are shortcuts.
Have been battling with this with pivots, database functions, array formulae etc. for a long time.
Attached is the spreadsheet with sample data. The red table is the part I am stuck on. The solution has to work in Excel 2003.
In D2:D11, I want a non-duplicate list of all the "1" names, i.e., Bob and Josh. In E2:E11, a list of all the "2" names (Sally, Bill & Jacob), and so on. Sorted would be nice, but not necessary. When new names and their numbers are added to A1:B200, they need to automatically show up in D2:G:201 as appropriate. I've looked over VLOOKUP, INDEX, MATCH, etc., but all seem to simply return the first and not every match. Maybe I'm just missing it.
Is this possible without VBA? Not that I have any objection to it, but delving into and learning it is a little outside the available time I have now. If it takes VBA I'll address it when I can free up some time.
I have to copy and paste each group of "Control Accounts" from column A into a separate workbook. I want to create a macro that can open as many new workbooks as there are unique records in column A and copy paste each group of unique records into those different workbooks.
In Excel I recorded a macro by carrying out some operations and then copied the code into VBA code window to the click event of a button expecting the code would operate well but in vain. What is wrong with my operations? By cliking command button placed on a userform I want to copy the date of one column to another and the data thus copied into another column should contain only unique value.
Our reservation system exports a spreasheet daily which contains hundreds of records relating to bookings. The worksheet has an ID column which is not unique, but is sorted alphabetically. I need to write some code to delete all records below the first 'set' of records relating to the first ID value found. i.e. i want to end up with only the set of records relating to the first ID found. So the basic logic would be to look at the value of the field in the ID column of the first record and then iterate down the rows until it came to a different value and then delete all rows below that. Its simple in concept, but im stuck on how to write this.
I have values in Worksheet 1, spread over A1:D25 and A200: D250.
In worksheet2 I have values again from A1:D25 and A200:D250.
Is is possible to only get the unique values of those 4 ranges with the advanced filter? They all need to be shown in eg worksheet 3 starting in A1, (so kinda merged in a sense)?
Is that a thing more for a UDF, or is there a excel function/option that does exactly that?
I have been looking for ages for that kind of function/option, since I thought it must be possible. But this sure does not look to be a standard functionality, or is it? Is there a (free) add-in that might do this kind of thing?
I found this code on some office help page:
Sub SortAllRangeData() ' Place column header for temporary sort area. Range("IV1").Value = "Numbers"
It kinda does what I needed, but it lists the actual data in the same spot it used to be. I want to be able to list the sorting in a different column on a different sheet and in 1 column only. Is this difficult to modify so it becomes a UDF or is this something totally different?
this code "Creates a New Workbook" for each item listed in an excel table, then, copy all unique values in their respective Workbook and save it. So, the problem is this. instead of creating a "New Workbook", i want to open a previously created Workbook (template) and do the procedures listed above. Is this posible?
Sub Copy_To_Workbooks() Dim CalcMode As Long Dim ws1 As Worksheet Dim ws2 As Worksheet Dim WSNew As Worksheet Dim rng As Range Dim cell As Range Dim Lrow As Long Dim foldername As String Dim MyPath As String Dim FieldNum As Integer Dim FileExtStr As String Dim FileFormatNum As Long Set ws1 = Sheets("Sheet1") '<<< Change If Val(Application.Version) < 12 Then 'You use Excel 97-2003 FileExtStr = ".xls": FileFormatNum = -4143 Else If ws1.Parent.FileFormat = 56 Then FileExtStr = ".xls": FileFormatNum = 56 Else FileExtStr = ".xlsx": FileFormatNum = 51 End If End If..............
I need to be able to pull information from 5 columns on 5 different pages, and pull all of the unique names out of it. From there, I need to create a list of all of these names. More often than not, this could only be three names, but I still would like this to be automatic because eventually it could be 50 or 60, and manually editing this list would get tedious. Lastly, is it possible to have a list create cells? For example: I have information on row 4, this one will start on row 6. My next group of information starts on row 14. That leaves 7 rows for information. I don't want to leave a large gap at the top of the page, so I'd like to be able to create cells if the list I'm trying to create has more information on it. Seems plausible in my mind, but I'm still new to excel.
In that file, you can see there is a list of somewhat similar data across 5 columns. Some of the entries are duplicates, some are different by only one character. What I want to be able to do is generate a list of all the unique rows of data, taking into account the data from ALL 5 columns. The list can be on another sheet or simply just further down on the same sheet, that doesn't matter too much.
I could do it if it were just one column of data, but struggling trying to do it with several columns.