Master Sheet - Trying To Create Unique ID
Mar 12, 2013
I have a master sheet with allot of columns. I want to be able to cut the data in seperate tabs.
I would like to have a formula to create a unique IDs to easily pull the information I need. If column Type and Vendor are the same I want the number in the Unique ID to repeat. The info on the master sheet can be sorted at any time.
Unique Id Type Vendor
Commission-1 Commission Microsoft
Commission-2 Commission Google
Commission-1 Commission Microsoft
Commission-3 Commission Netflix
Commission-2 Commission Google
View 5 Replies
ADVERTISEMENT
Dec 4, 2006
[data] ....
With the above data, I'd like put all of the data for each respective dept on it's own sheet. Obviously I have many rows of data and departments so manually would be almost impossible.
View 9 Replies
View Related
May 24, 2013
This code does creates a Master Sheet for all the worksheets in the workbook.
VB:
Sub CreateMaster()
Dim wrk As Workbook 'Workbook object - Always good to work with object variables
Dim sht As Worksheet 'Object for handling worksheets in loop
[Code].....
I will run this code monthly thru a button to be created on the 1st worksheet.
VBA for the Master worksheet to be created in another workbook? So One code for the Master to be created on the active workbook and another to a different workbook.
View 9 Replies
View Related
Dec 20, 2012
I gather two lists of serial numbers (i.e.) from two different sources; one populated in sheet1, A:A (with variable row numbers) and the other in sheet2 B:B (again with varying number of rows)
I am trying to gather a master list of unique serial numbers in sheet3, C:C.
So far I have tried advanced filter, union.range, etc. but couldn't figure work it. I guess some of these columns need to have names assigned to it and have a header.
View 9 Replies
View Related
Jun 20, 2008
I have the following spreadsheet Columns on master sorted by Column J:
A--------------E-------------J
SUPPLIER----CARRIER------LOC CODE
BELGIUM-----HAM-----------BP
HYDRO-------MSC-----------BP
DAINIPPON---NNR-----------BP
BELGIUM------YM-----------BR
BELGIUM------YM-----------BR
HYDRO-------MSC----------CA
BELGIUM-----HAM-----------CA
HYDRO-------MSC-----------CA
HYDRO-------MSC-----------DE
DAINIPPON---NNR-----------DE
BELGIUM------YM-----------DE
BELGIUM------YM-----------DE
What I need too do based on the Codes in Column J is create a separate workbook for each different code.
View 9 Replies
View Related
Jul 3, 2013
I need to consolidate a lot of information from multiple workbooks all the workbooks are located in a folder, i am not bothered about running each one separately or a group at a time, each work book has ten sheets with each sheet in the workbook being different, it needs to add to the next blank row on each sheet.
View 1 Replies
View Related
Apr 16, 2014
I am trying to find a code that will allow me to generate multiple sheets depending on what is selected in one specific column. I have found a code that is perfect for this however I can't seem to set the range. For example instead of copying all of column headings I only need to copy up to column AN2.
View 1 Replies
View Related
May 11, 2009
I am making planning & status board for each project(yard). But in my 1st Stage I am having a problem for creation of Userform & List Box for my Display Sheet.
Problem-1) I want to create userform which can Add or Delete my MasterData.
Problem-2) I want to display & change Block Status of Yard in List View. Yard No will be selected using combo box.
List View Should allow addition & Deletion of record.
Note: I am a bit new user for VBA but can copy codes from sample file to use in the files.
View 8 Replies
View Related
Feb 6, 2008
I have a master spreadsheet that list several columns about employees(name, date, event name, etc.). Then I have an indivdual sheet for each employee. I am trying to import the column information for each employee onto their individual sheet based on their name. It is possible to import the individuals data from the master sheet to the individual sheet based on the employee name?
View 9 Replies
View Related
May 26, 2013
I am trying to put togther a VBA form button click to do the following: I have several customer names all in master sheet A1 - A300. I want the code to notice that there is a new customer and generate a new sheet, naming the sheet the customers name and copying and paste the entire sheet named 'worksheet' to this newly generated sheet.
View 2 Replies
View Related
Aug 28, 2013
I want vba code to pull data from two sheet in workbook, code has to pull all data from first sheet , then pull data from second sheet and paste some particular column only below first column sheet
e.g i pull data from two sheet(ONSITE&CCI)
SHEET-1ONSITE CONTAINS HAVE 57 COLUMN
SHEET-2 CCI CONTAINS ONLY 19 COLUMN
FIRST I PULL 57 COLUMN DATA ONCE FINISH MOVE TO SECOND SHEET CCI CONTAINS 19 COLUMN BUT ITS HAS TO PASTE DATA BELOW DATA OF ONSITE TO PARTICULAR ASSIGNED COLUMN'S ONLY BUT COLUMN NAMES IN BOTH SHEET IS TOTALLY DIFFERENT
View 1 Replies
View Related
Mar 1, 2014
In this attached example, this is a portion of a actual work procedure. The yellow highlighted cells are the same work element within the master procedure but one is for one type of machine while the other is for same model but added options. This is a pattern throughout the entire worksheet. Basically 1 model with several different types of options. I don't want to have unnecessary elements in a work procedure.
So what I am trying to accomplish, I want to create a userform or dashboard which will allow selection of model #, model type #, then based off those selections have excel populate a worksheet with all correct procedures based off model type choice.
In this example there is 6 model variations, all share same basic procedure, but all have their own work procedure based on options, so my above approach will allow me to make changes to the master procedure only instead of changing 6 procedures.
View 6 Replies
View Related
Feb 7, 2014
I am trying to create a master file, with a macro built in, that will allow multiple users to use it at once. The macro is to open a dilouge(sp sorry) box showing the contents of a specific folder, allow the user to selct one of the sheets, then copy and paste the set details from the hidden tab on this sheet (All sheets will be the same barring title), append the details to the master list in the first empty row.
I've got this far thus
Sub Macro1()
'
' Macro1 Macro
'
'
' Modify this folder path to point to the files you want to use.
FolderPath = "My Folder name here"
' Set the current directory to the the folder path.
ChDrive FolderPath
[Code] .....
So I can copy the row, but I can't get the first part to open .
View 3 Replies
View Related
Nov 3, 2009
I'm trying to create a function in a template invioce that will look up a value in another spread sheet (fees).The data will be based off three values entered in the invioce from drop down boxes. I've attached the workbook with the master sheet and the invioce (sheet 5) The three criteria that can be selected is the project, month and name and I want the amount of hours to be returned based on that information in column e. The projects are seperated and billed by month.
View 3 Replies
View Related
Jun 13, 2013
I am trying to make my macro more dynamic for a spreadsheet I am working on. I have this code which splits out worksheets (using the specific names of the worksheets-not dynamic) from a main workbook into template workbooks (which are basically just an empty workbook because I didn't know how else to do it) and then saves them using the paths below. I would like to make this more dynamic by splitting the different worksheets into new workbooks based on a key column in the hierarchy worksheet.
Basically I have a list of accounts in column B with the file name they should be exported to in column A. There are about 30 accounts being split into 6 different region files. Also note that the same account might be listed multiple times in column A (needed to add multiple numbers for other lookup formulas in the worksheets) but that account worksheet will still only be going to one of the six region files and not to multiple regions. After these are copied to an individual file I would like to save it to a location on my computer. All files will go to this location.
VB:
Sub Create_Subfiles()
Dim FDMName As String
Dim FBName As String
Dim DIYName As String
Dim WMName As String
[Code] .....
View 3 Replies
View Related
Jun 27, 2013
VBA Macro to work through a worksheet that consist of static data (tab 4) cost centres and to populate a new work book per cost centre consisting of three tabs for every cost centre found in the static data.
The master Workbook has the following tabs:
Tab 1 is called travel and consist of column a which is the cost centre number (plus 14 other columns)
Tab 2 is called Mobile and consist of column a which is the cost centre number (plus 14 other columns)
Tab 3 is called Expenses. and consist of column a which is the cost centre number (plus 14 other columns)
Tab 4 Static Date column 1 cost centre number and consist of column 1 which is the cost centre number (plus 14 other columns).
If no information found on a specific cost centre, the tab will include the headers and return the words "No transactions for this period"
Whilst splitting data into Tabs the workbooks should check against the Static Data table and include cost center description in Column B of each tab in the new workbook.
If master workbook consist of the following....
Tab 1 is called travel and consist of column 1 which is the cost centre number (plus 14 other columns), cost centres, 555,557,
Tab 2 is called Mobile column 1 cost centre number and consist of column 1 which is the cost centre number (plus 14 other columns) cost centres, 555, 78689,
Tab 3 is called Expenses. column 1 cost centre number and consist of column 1 which is the cost centre number (plus 14 other columns), cost centres, 555,
tab 4 Static Date - column 1 cost centre number and consist of column 1 which is the cost centre number (plus 14 other columns). cost centres, 555, 557,78689
It should output 3 workbooks by cost centre number.
One for 555, which consists of 3 tabs, travel, mobile and expenses.
A second for 557 which has 3 tabs travel, mobile and expenses, but only with data in the travel tab.
A third for 78689 which has 3 tabs travel, mobile and expenses, but only with data for mobile data.
The workbooks will be replicates of the contents within the tabs where column a wil be the cost centre plus 14 additional columns.
View 5 Replies
View Related
Jun 6, 2013
I'm using Excel 2010. I have a workbook that has six or seven worksheets in it. Each worksheet has a header row, and then lists of clients at the clinic where I work. The columns are last name, first name, medicaid #, social security #, DOB. We use these lists every month to verify that each client has Medicaid for the month. Therefore, there are also columns with names like April, May, June where we mark yes or no for each client. Some of the worksheets also have information about the clients' guardian, phone number, etc., but not every worksheet has those. (I can't show you the worksheets b/c of federal privacy laws, of course.)
I really, really want a worksheet that's a master list of the data from each of the existing worksheets, and I'd like to keep it synced to the source worksheets. I'd love it if I could also add a column telling me which of the source worksheets the data originally came from.
I've tried a few things to make it happen, but nothing has worked.
I've tried using the Consolidate function built into Excel as well, but that only works with numbers, not text, and it wants to manipulate the numbers instead of just copying them over.
I've found several macros online that should have worked (including one from this site) but that I wasn't able to install to my worksheet. I followed all the steps for installation, and throught it worked, but when I went back to the Excel file to run the macro, the list of available macros remained emptpy.
Is it possible that corporate IT has disabled the ability to install macros? Is there somewhere in Options were I need to go to turn Macros on?
View 5 Replies
View Related
Jun 7, 2014
I am trying to auto populate one spreadsheet from a master sheet
What I am trying to do: I have a master sheet where information on 25 countries is entered. Sheet has multiple columns for data entry I have 25 additional identical spreadsheets that correspond to one of the 25 countries so can drill down to country specifics
From the master - is it possible to select a country from a drop down menu so when I start entering data on the master it auto populates the corresponding sheet by the country selected.
View 8 Replies
View Related
Jul 22, 2014
I have a master sheet that contains all data relating to a particular Agent like Agent Code(Primary Key), Name, Bank details etc so on and so forth. Every month I have to make a new sheet which contains only a few of the columns from the master sheet. I have to manually select and copy each column for the specific agents to whom I have to make the payments. Now, I wanted to know..if there is any way in which I can enter only the Agent Code in the new sheet and it will look the code up in the master and copy the values of the relevant fields from the master to the new sheet.
View 1 Replies
View Related
Jun 1, 2012
I have a query on array formula
Am using this formula to get the details from master sheet to template sheet
=IFERROR(INDEX('P O Detail'!$D:$D, SMALL(IF('P O Template'!$C$4='P O Detail'!$B:$B, ROW('P O Detail'!$A:$A)-ROW('P O Detail'!$A$2)+2), ROW(1:1))),"")
with Ctrl+Shift+Enter
This is working fine based on the input cell $C$4
What am looking for is ... how to add two more input data $D$4 & $E$4 so that based on these three values I should get the required output.
View 3 Replies
View Related
Aug 24, 2009
I am tracking my sales interactions and am trying to link cells so when I update on one sheet it updates my last "customer touch" on a master sheet. Current formula-
On "sheet1" I selected a cell and used this formula... =sheet2!$b$7
The problem is that I want to keep a history of what was in that sheet 2 B7 cell so i insert a row (making B7 move down and become B8) and enter new info into the new b7. if I go back to sheet1 the formula in the selected cell becomes =sheet2!$b$8 I want it to stay to =sheet2!$b$7 no matter what I do... insert rows, delete rows etc...
in short what i am trying to do is have a cell in sheet1 show my last interaction with the customer and keep a history of in sheet2-infiniti.... with the caveat that my last interaction on sheet 2 etc... is listed first (thus the insert row)
View 2 Replies
View Related
Dec 11, 2009
The code below pops up two input boxes asking the user to enter the location number and the vendor number, and then saves the worksheet as a text file to the desktop based on their input:
View 5 Replies
View Related
May 7, 2008
Using a formula,
How can i get excel to create a custom unique number using the first three (or two) characters from another field and then adding four unique numbers to the characters.
basically heres the info
Field H2 contains the characters "ACS" so i would want another field to create a unique code to include something like "ACS1234" and to continue to the next row would be the first three characters of field H3 then 1235.
View 9 Replies
View Related
Jun 20, 2008
I have a list of references and I need to pull from a database. The database contains more than one row with my reference, so I try doing something like this:
Sub ()
Range("B11").Select
Do Until IsEmpty(ActiveCell())
If ActiveCell = _
"7501" Or _
"7507" Or _
"7508" Or _
"7509" Or _
"7618" Then
But it does not work, besides I need to add more references. Could some one know a better way to do this?
View 3 Replies
View Related
Sep 17, 2008
I have a file with 10 tabs (worksheets) and i would like all the information on each sheet (it's all in exactly he same format, same headings, etc) to automatically feed itself onto a "MASTER" tab. sure i could cut and paste it, but here's the tricky part. as the separate tabs are changed (deletions, additions, edits), i want the MASTER sheet to automatically update with newest information. am i asking for too much from Excel? (I think not, as I've become a firm believer that Excel can do anything - except the laundry!)...
View 9 Replies
View Related
Jan 2, 2007
The title says it all - every month i have 60 or so workbooks i would like to add to a master worksheet for that month - each tab name being the name of the worksheet. I also have 60 or so mht copies of the same workbooks i would like to add to a different workbook.
The workbooks are titled K11_120106, K11_120206, K11_120306 ....
View 2 Replies
View Related
Feb 11, 2014
I have some raw data of employment records on one workbook and from this i need to autopopulate there information into another workbook.
I need to split the records up by the different departments they work . I.e so what i am after if possible is -
If The department name in the raw data matches column A1 for example then it auto populates down in B2 all the names of people who work in that department .
View 9 Replies
View Related
Mar 17, 2012
I have a Column, say column A, setup with a lot of repeated data. Now what I want is to pick only a single value from each set of data and put them into a separate column. for example:
Col A
1
2
3
2
4
1
5
4
1s
a2
1s
a2
a2
6
What I want the excel to do is to pick from the above data only a unique value and put them into a separate col, like this:
Col C
1
2
3
4
5
1s
a2
6
View 5 Replies
View Related
Jul 23, 2007
In column A I have values starting at row 4, ranging up to row 1004.
in coulumn Q (starting at row 3) I'd like a list of unique entries from column A
I know this line is my problem
If Range("A" & I) Range("Q4:Q30") Then
but i'm not sure how to compare against all values in a range
Sub FilterSymbol()
Dim I As Integer
Dim X As Integer
X = Range("O2")
I = 4
Do
If Range("A" & I) Range("Q4:Q30") Then
Range("Q" & I) = Range("A" & I)
I = I + 1
Else: I = I + 1
End If
Loop Until I >= X
End Sub
View 9 Replies
View Related
Mar 6, 2008
I need to create 50-60 bingo cards for my sister's bridal shower. I wanted to create these using excel. I need to create unique cards so that not everyone bingos at the same time (I only have so many door prizes to give away!)
The basic setup is this: under "B" there are 5 spaces, and each space must have a unique number between 1 and 15 (no repeats). Under "I" there are 5 spaces, and must use a unique number between 16 and 30, "N" has 5 spaces using a unique number between 31 and 45, "G" has 5 spaces using a unique number between 46 and 60, and "O" has 5 spaces using a unique number between 61 and 75. A sample card is below:
BINGO
1416375862
217455773
830366066
1122394761
1223435668
I have tried to use the "randbetween" function, but this creates repeats and I would have to go in and manually change the numbers that repeat.
View 9 Replies
View Related
