Autofill: Macro That Merges A1 Vertically As Shown In My Spread Sheet To The End Of Column B And C
Apr 5, 2007
Each sheet has the same basic formatting. A1 contains a name. B1, C1, D1 are column headers. B2:B is data. C2:C is data and always stops at the same row B2:B range does. The only differences between the sheets is that they might not stop at the same row. I want a macro that merges A1 vertically as shown in my spread sheet to the end of column B and C. I want a border around the merged data, as well as around the B data and the C data individually.
Basically I want to see more dates, as you can see I've dropped down Cell B1 (31-Mar) to the B28 (27-Apr) Obviously if I wanted to see past 27-Apr I would just continue the drop down but I want to keep it within 28 rows and carry the dates onto cell C1-C28, D1-D28 etc, is there any way to do this using the drop down function or will I have to drop down each column individually then look date in the last row of that column and type the next date myself on the next column and drop it down?
I have 2 columns on sheet 1 as below. I need a code to put all the data in column B vertically on sheet 2 as the result shows. Please note all cells data will be off various lengths all seperated by a comma.
I am making a spreadsheet that sorts and pastes, but I need to know if I can add a code to the Sort and Paste Macro that will open the second spread sheet needed without just already having it open and using the
I am trying to work on Sheet 2(Details per person). I want to be able to display all items in a row that matches the 2 criteria (Skype ID and Date) and the items are based from Master Raw file which is in another sheet. I would like to just use index and match.
I am looking for code to put in a macro that will go through a tab of data and delete the rows that have merged cells in them. The number of rows that there will be will never be a constant because the people using it will be pasted in information from another source, deleting the lines that have merged cells then run a macro with stuff that needs to be done to the info, but I would like to save them the step of delete the rows that have cells.I think it is Office 2013 I am using. I am not at that machine right now so I can't check.
I am fairly new to macros and I am currently working on a project where I would like to create a 2 buttons which will filter by date and by owner. The spread sheet I have is fairly large and is added to weekly.
I have two objectives that I am trying to reach:
First I need to filter for all past due task items from the Thursday of the week I am working in back and for a specific person (owner) by the finish date
Second I need to filter for upcoming tasks one week out for a specific person (owner). The objective of this is so that on any given day a user can find any upcoming tasks that are due one week out.
If this is not an option. My thought was to create an input box where the user can input the date and the information on the spread sheet will pull all past due items or upcoming tasks. These two items need to pull seperatly not together.
I know I can create a macro by autofiltering by columns however I am trying to avoid having to go in and change the date each week.
Start date is column E Finish date is column F Owner is column L
I have a large amount of data in a single spread sheet. Each row has a branch number on it, there are multiple branch numbers. Each branch number is located in Column A. I want to separate this sheet and put all of the branch numbers into their own sheet. how to do this without manually copying and pasting?
I have a spreadsheet that lists employees and their certifications. If an employee has multiple, then they will show up on as many rows as they have certifications.
The macro I have merges them into one row with a line break, but only the first column's unique value has been merged while the other columns containing their own unique values are duplicated when I want them to show up only once. Example: Jane Doe shows up 2 times on the report. Her name should only show up once on the row, not 2 times with a line break.
Here is the code. I have also attached an example of what I need. Because the attachment is a simpler version of the actual report, is it possible to specify which rows have the unique values and which ones don't?
I'm trying to autofill data in a column from one sheet to another in the same workbook. My goal is to be able to paste data in one sheet and have it appear in another sheet.
Above is a table we have for high level tracking on specific tasks due for projects.
What I want to do is: If the last cell in a column = Jan then it will automatically copy the whole column and insert it into a Sheet named January and have it automatically update. Below is the end result.
1. I need a macro to find a unique number, say a 10 digit number starting with 4100.. and move it 1 row down and 3 rows to the left. It needs to look only in one column (E) for this number. This row contains several unique numbers, variable number of blank cells between them, all having 10 digits and starting with 4100.. - So the macro needs to repeat this for every unique number.
2)Once it does this, I need it to autofill the unique number in all the cells in column A until the next unique number is reached.
I am copying a large sheet into a spread sheet. The problem is one of the columns contain numbers with some cells having an asterisk at the end of the number. This causes problems with the formulas on other sheets that use this data. Can I use a formula or what is the best way to eliminate the "*".
I have included the table. What I want to do is in a user form pick a county ie Devon, Then by clicking "go" all entries that contain "Devon" are then copied to a " sheet 2" I don't want to use the Ctrl-F
I have many excel sheets with 1000 columns and 100,000 rows. I have to import these sheets into SAS system which wont let me import more than 250 columns per sheet (it misses the remaining columns, though rows it can import all of them). So, one solution is break each such sheets into 4 individual sheets. Ofcourse I can manually take the cursor to 250th column and copy/paste that data into another sheet and so on. But this is cumbersome and also means there is chance of mistake.
Is there a way I can divide the sheets into 4 sheets separately with each sheet having equal number of columns? Another thing I need to do is that on the top row there are company codes -most of them start with a letter which is fine. There are few which start with a number and I have to add a dummy letter x before the number. Now since there are 1000 columns, I have to scan the top row of all 1000 columns to find number codes which are scattered unevenly. So I was wondering if there is a way to tell excel to change all such number codes with extra x behind each number?
I have a spread sheet (sheet2) that runs an add-in and does some calculations and arrives at a result which is a number in cell P6. All I have to do is type in a Stock Symbol in cell A1, and the sheet runs the add-in, calculation automatically. If I change the symbol in A1, the sheet re-runs the add-in/calculation and gives me the result for the new stock in cell P6.
Sheet 1, has a list of stocks, indexed in Column A.
Rather than me changing the symbol manually in sheet 2 cell A1, how can I automate it such that it will run the functionality automatically for each symbol in Sheet1 column A sequentially and then tabulate the results for each stock/symbol in Sheet 1 column B.
I tried to attach the sheet/book herewith, but could not. It is less than 100KB in size
I have a few hundred work orders done in Excel. Each spread sheet is a seperate file but all are identical in structure (basic order form). I need to change the value in the same cell on all the forms (manager's name needs to be changed on all our forms).
Question: How do I do this without having to open and edit all five thousand forms?
Sheet 1 has last name, first name, sales, and region in columns A through D, respectively.
Sheet 2 is a rankings sheet of sheet 1. Sheet 2 contains 2 headings: Top salespersons for region A, and top salespersons for region B. I'd like for the top 2 salespersons' (in each region) names & sales amounts to appear under their appropriate region in sheet 2. I just don't know which formula to start with that would be able to look at sheet 1, sort the top salespeople in each region, then display those in the right order on sheet 2.
formular to show a coinage total in a spread sheet im sure its to do with < > but new to this and dont have a clue any help apreciated. This is what i am trying to achieve.
excel formula If A1= 10 Then B2= 0 If A1 =7 Then B2 = -3 If A1=13 Then B2= 3
I am working towards creating a spreadsheet for making a budget for a film + a system to monitor the expenses vs budget allocated on a day to day basis (to ensure the budget is not being crossed).
I would like to calculate the average number of hours worked per day in a particular week from my time sheet (in "Google spread sheets"). Daily hours are calculated in hr:min:sec format. Days not worked display 0:00:00. The formula I use to calculate total hours worked that weeK is for row 9 as follows: =INT( SUM(G9,K9,O9,S9,W9) )*24+LEFT(TEXT( SUM(G9,K9,O9,S9,W9) ,"HH:mm"),2)&TEXT( SUM(G9,K9,O9,S9,W9) , ":mm:ss")
How do I calculate the average number of hrs and minutes worked per day (excluding days not worked, cells containing 0:00:00)
I need to create a spread sheet that in Col A has 3 variables, each of which I need to triger 1)fill of that row, 2)different formula's in different columns within that row. Is this possible in excel?
Im trying to import data from a plumbing supply website to an excel spread sheet.
On the supply house web site, for each part catgory there are corresponding pages containing a price list data table.
there are from 1 to 3 pages (price list data tables) for each part category.
i can import data from page 1 and page 3 fine. When i try to import data form page 2, it returns no data, or imports page 3 (instead of 2)
I spoke to the person who designed the website and he said that it was a problem within excel and not a problem with his program. (said it was a problem with excel not being able to recognize the page)
Public Sub ListMyFiles() Dim fso As New FileSystemObject Dim fso_Folder As Folder Dim fso_File As File Dim file_count As Long
Set fso_Folder = fso.GetFolder("S:SHARED All of TransportationTraffic AssessmentMultiway Warrants") file_count = 1 For Each fso_File In fso_Folder.Files file_count = file_count + 1 Cells(file_count, 1).Value = fso_File.Name Next fso_File Set fso = Nothing End Sub This works great, but is there a way for the macro to recognize the file names that have already been added to the spread sheet and only return new ones that have been added to the folder?
I am currently working on a very large spreadsheet with a current size of 94mb. So obviously I have problems running and using it. My question is a general one, I need to understand better why a spreadsheet gets so large. It has 55 tabs with the largest having 1000 rows. It also links in a number of places between sheets but also to external locations. I have moved all files that it is linked to in to the same file. I am at the point where I am thinking about starting again! And I was wanting some tips or even a recommendation of a book that could help me optimize my spreadsheet going forward so to increase the speed but also reduce the size.
