I need a formula to figure the 5 lowest of last 6 sores, since everyone doesn't play every week there would be blank spaces and it needs to just give me the average if they have less than 6 scores!
I have manipulated the formulas until I am blue in the face and cannot get it to work;
I would like to set up a Excel spreadsheet for golf handicaps where it will use the 4 lowest scores of the last 5 entries. It must be able to work even if there are missed entries (someone didn't show up/blanks ignored). I would like it to work if there are only three scores used at the beginning of the season, but when there are 5 or more scores, use only the 4 lowest scores out of the last 5. I want it to average these scores. The scores would start in column d. The following is an example of scores with an underscore being a blank:
Golfer 1 45,50,42,43,46,37,45,45,46,44
Golfer 2 41,43,42,_,41,_,_,47,42,39
Golfer 3 44,43,45,54,_,45,43,40,42,_
I am creating a workbook to manage golfer scores, teams, winnings, handicap, ect. I am having trouble with the statistics sheet. I Need A Sub To:
1. Column "B" , take the average of the lowest 5 numbers in columns "AB" though "AU"
2. Column "C" , take the average of the lowest 10 numbers in columns "G" through "Z" divided by 0.96
3. Column "D" , take the average of the lowest 10 numbers in columns "AW" through "BP"
this needs to happen for each row where there is a name. (names added daily)
I have included a similar sheet as the one i am working with along with some command buttons typically not included. Should show some of the problems I am having.
I am attempting to put together a golf tournament spreadsheet. I have figured out how to review a list of numbers, find the lowest ten scores and make a list of those scores. Next to that I want to have excel input the name of the player that shot that score. The problem is, a couple of scores match so excel is only returning one of the golfers names. I am trying to have it return the other golfer who scored the same score.
Here is the formula I am using in Column N:
=SMALL($L$2:$L$21,1) This runs from 1 thru 10 for the 10 lowest scores.
Here is the formula I am using in Column O:
=INDEX($A$2:$A$21,MATCH(1,INDEX(($L$2:$L$21=$N2)*ISNA(MATCH($A$2:$A$21,N$2:N2,0)),0),0))
Here is the formula I am using in Column P: (gives same info as column O formula)
=INDEX($A$2:$A$21,MATCH(SMALL($L$2:$L$21,ROW(N1)),$L$2:$L$21,0))
Column A = golfers names
Column L = list of all golfers scores
Column N = lowest ten scores in order
Spreadsheet Attached : Golf Excel Score.xls
I am attempting to put together a golf tournament spreadsheet. I have figured out how to review a list of numbers, find the lowest ten scores and make a list of those scores. Next to that I want to have excel input the name of the player that shot that score. The problem is, a couple of scores match so excel is only returning one of the golfers names. I am trying to have it return the other golfer who scored the same score.
Here is the formula I am using in Column N:
=SMALL($L$2:$L$21,1) This runs from 1 thru 10 for the 10 lowest scores.
Here is the formula I am using in Column O:
=INDEX($A$2:$A$21,MATCH(1,INDEX(($L$2:$L$21=$N2)*ISNA(MATCH($A$2:$A$21,N$2:N2,0)),0),0))
Here is the formula I am using in Column P: (gives same info as column O formula)
=INDEX($A$2:$A$21,MATCH(SMALL($L$2:$L$21,ROW(N1)),$L$2:$L$21,0))
Column A = golfers names
Column L = list of all golfers scores
Column N = lowest ten scores in order
Needed for a golf league where the average of the best three of five games is needed - so, low score is better but score must be greater than zero. Each row is a player, column A is the players name, B-F 5 different games and the average will be in column G. I tried this formula but if someone didn't play at least 3 games SMALL returns the #NUM! error value. If I enter 0 for games not played then SMALL picks up the 0 as the lowest score. =(SMALL(B3:F3,1)+SMALL(B3:F3,2)+SMALL(B3:F3,3))/3. How to nest the different functions (if>0, small, and avg would be good too)
View 2 Replies View RelatedI am doing a Golf scorecard but I have been having trouble figuring out how to calculate the last 6 lowest scores in a series of about 30 scores. What formula to use? Series looks like this
43 52 52 51 44 44 60 54 40 50 53 = 272
I run a golf society and need to set up a golf aggregate sheet that will allow me to enter the players weekly scores and the sheet will then look for the lowest score entered for each player and replace it with their score of this week.
View 13 Replies View RelatedI am copying a large sheet into a spread sheet. The problem is one of the columns contain numbers with some cells having an asterisk at the end of the number. This causes problems with the formulas on other sheets that use this data. Can I use a formula or what is the best way to eliminate the "*".
View 4 Replies View RelatedI have included the table. What I want to do is in a user form pick a county ie Devon, Then by clicking "go" all entries that contain "Devon" are then copied to a " sheet 2" I don't want to use the Ctrl-F
View 2 Replies View Related I have a spreadsheet with names on and I need to check to see if the surname in column C, also appears in column A&B.
I would like to list, in another sheet, the names that are in Column C that are NOT in A&B. Then I can see what data is missing.
I have a spread sheet (sheet2) that runs an add-in and does some calculations and arrives at a result which is a number in cell P6. All I have to do is type in a Stock Symbol in cell A1, and the sheet runs the add-in, calculation automatically. If I change the symbol in A1, the sheet re-runs the add-in/calculation and gives me the result for the new stock in cell P6.
Sheet 1, has a list of stocks, indexed in Column A.
Rather than me changing the symbol manually in sheet 2 cell A1, how can I automate it such that it will run the functionality automatically for each symbol in Sheet1 column A sequentially and then tabulate the results for each stock/symbol in Sheet 1 column B.
I tried to attach the sheet/book herewith, but could not. It is less than 100KB in size
I run a small town pool league and use excell to track player handicaps, ect. we use a simple system for handicapping. Players can be from 2- to 7+ (2- 2 2+ 3- 3 3+ 4- 4 4+) and so on. if a player is a 2+ and wins they go to a 3- and so on. I want to be able to just type a W or an L and have it look up the players previous handicap and return a new handicap in the next field. I've allready figured out how to count the W's and L's and return the total for a teams weekly wins on another page, and give stats on a players wins and losses. I then print each sheet out weekly. Teams have 8 players but only play 5 each week so some players might not play for 2,3 or more weeks. I also use access to keep track of all the people that have played in the league. some players play a few sessions then quit for a few. this way i can keep track of their handicaps when not playing and havew a list of all the people that have played in the league. Can i get excel to transfer a players handicap to access each time it changes?
View 9 Replies View RelatedI was trying to compare string from excel spread sheet to a value I am not getting any output. It is not working
View 4 Replies View RelatedIs there a way to lock out a spread sheet if it is sent to an unauthorized e-mail address or forwarded to another e-mail address?
View 9 Replies View RelatedI have a few hundred work orders done in Excel. Each spread sheet is a seperate file but all are identical in structure (basic order form). I need to change the value in the same cell on all the forms (manager's name needs to be changed on all our forms).
Question: How do I do this without having to open and edit all five thousand forms?
I have two spreadsheets. One is a listing of football scores from the previous week. The other is the schedule for that week. I would like to be able to populate one from the other.
Even if someone could point me in the direction of which functions to use that would be helpful.
Based on the data in the results spreadsheet in columns M, N and P ... I need to look in the scores spreadsheet and compare to columns A, F, H and I. I would need to retrieve columns G and J for their scores.
I've been looking at SEARCH, LEFT AND VLOOKUP so far!
formular to show a coinage total in a spread sheet im sure its to do with < > but new to this and dont have a clue any help apreciated. This is what i am trying to achieve.
excel formula If A1= 10 Then B2= 0
If A1 =7 Then B2 = -3
If A1=13 Then B2= 3
I am working towards creating a spreadsheet for making a budget for a film + a system to monitor the expenses vs budget allocated on a day to day basis (to ensure the budget is not being crossed).
View 3 Replies View RelatedI would like to calculate the average number of hours worked per day in a particular week from my time sheet (in "Google spread sheets"). Daily hours are calculated in hr:min:sec format. Days not worked display 0:00:00. The formula I use to calculate total hours worked that weeK is for row 9 as follows: =INT( SUM(G9,K9,O9,S9,W9) )*24+LEFT(TEXT( SUM(G9,K9,O9,S9,W9) ,"HH:mm"),2)&TEXT( SUM(G9,K9,O9,S9,W9) , ":mm:ss")
How do I calculate the average number of hrs and minutes worked per day (excluding days not worked, cells containing 0:00:00)
I need to create a spread sheet that in Col A has 3 variables, each of which I need to triger 1)fill of that row, 2)different formula's in different columns within that row. Is this possible in excel?
View 9 Replies View RelatedIm trying to import data from a plumbing supply website to an excel spread sheet.
On the supply house web site, for each part catgory there are corresponding pages containing a price list data table.
there are from 1 to 3 pages (price list data tables) for each part category.
i can import data from page 1 and page 3 fine. When i try to import data form page 2, it returns no data, or imports page 3 (instead of 2)
I spoke to the person who designed the website and he said that it was a problem within excel and not a problem with his program. (said it was a problem with excel not being able to recognize the page)
Public Sub ListMyFiles()
Dim fso As New FileSystemObject
Dim fso_Folder As Folder
Dim fso_File As File
Dim file_count As Long
Set fso_Folder = fso.GetFolder("S:SHARED All of TransportationTraffic AssessmentMultiway Warrants")
file_count = 1
For Each fso_File In fso_Folder.Files
file_count = file_count + 1
Cells(file_count, 1).Value = fso_File.Name
Next fso_File
Set fso = Nothing
End Sub
This works great, but is there a way for the macro to recognize the file names that have already been added to the spread sheet and only return new ones that have been added to the folder?
I want to concatenate two columns in a separate tab but when I do, the values appear as ....
View 9 Replies View RelatedI am currently working on a very large spreadsheet with a current size of 94mb. So obviously I have problems running and using it.
My question is a general one, I need to understand better why a spreadsheet gets so large. It has 55 tabs with the largest having 1000 rows. It also links in a number of places between sheets but also to external locations. I have moved all files that it is linked to in to the same file.
I am at the point where I am thinking about starting again! And I was wanting some tips or even a recommendation of a book that could help me optimize my spreadsheet going forward so to increase the speed but also reduce the size.
I am trying to put together a projection spread sheet for a client for cash flow purposes. I have it laid out but I cannot wrap my head around the formula and I've tried a few. Here it is.
A1: Client Name B1: Invoice Date C1: Projected Due Date ( I have 45 days added to B1) D1: Invoice Amount E1: Jan F1: Feb G1: March H1: April I1: May J1: Juneetc...
I am trying to forcast out the invoice collection date (C1). So basically in the month of June column I am trying to say if C1 falls between June 1 & June 30th then it should equal D1 (the amount due in that month). So if the invoice has a due date (C1) that falls in that particular month than I am forecasting the cash flow in the month it's collected.
On the attached spread sheet here is what I am trying to do. In B2 I will either enter D (digital label) or F (Flexo label). With that than if a D is entered nothing else will happen with in spread sheet but if F is entered D23:Q40 will need to be cleared out and blank.
View 5 Replies View RelatedI am fairly new to macros and I am currently working on a project where I would like to create a 2 buttons which will filter by date and by owner. The spread sheet I have is fairly large and is added to weekly.
I have two objectives that I am trying to reach:
First I need to filter for all past due task items from the Thursday of the week I am working in back and for a specific person (owner) by the finish date
Second I need to filter for upcoming tasks one week out for a specific person (owner). The objective of this is so that on any given day a user can find any upcoming tasks that are due one week out.
If this is not an option. My thought was to create an input box where the user can input the date and the information on the spread sheet will pull all past due items or upcoming tasks. These two items need to pull seperatly not together.
I know I can create a macro by autofiltering by columns however I am trying to avoid having to go in and change the date each week.
Start date is column E
Finish date is column F
Owner is column L
I am setting up a spread sheet to calculate call duration it would be a great help if data could be entered using one hand IE use decimal point on the number pad instead of the colon is this possible. I will need to subtact start time from end time to get the duration
View 9 Replies View RelatedI have a large amount of data in a single spread sheet. Each row has a branch number on it, there are multiple branch numbers. Each branch number is located in Column A. I want to separate this sheet and put all of the branch numbers into their own sheet. how to do this without manually copying and pasting?
View 9 Replies View Related