Basically, all I need to do is have a cumulative total in one cell that adds the same figure each fortnight. ie, adding 100 each fortnight would give me 500 after five fortnights.
Im assuming it needs to run off the date on my pc, and I've managed to figure that out with =TODAY(). What I cant figure out is how I would set a start date and then set my fortnightly figure to be added. Presumably then the formula would state "if today is 14 days (or divisibly by 14 days) greater than start date, add an extra increment".
After about 3 hours of online research, and maybe an hour or so of experimenting with the IF command, my mind is blown and I, essentially, have given up!
I have a spreasheet with each column representing a month, then four more colums to represent quarterly values, and one other for a summary of the entire year.
I don't want a cumulative running total. For example, if I enter a value for January, that value should appear in the 1st quarter column, and yearly summary colum.
Now, if I enter in a February value, the 1st quarter column should display the February value. I need the 1st quarter column to "update" for each of the three months within the quarter. Likewise for the yearly column except, obviously, I need it to update for each of the 12 months.
I started toying with the IF function, with limited success, but there MUST be an easier way?
D17 is a cumulative dollar total (year-to-date) of the monthly changing dollar amount in D5. Each month I manually add the D5 figure to D17. Is there a formula that will automatically update the D17 cumulative total with the everchanging D5 monthly figure?
in my worksheet i have different kind of items with its cost. in my case which is not in order, that is, the order of items can be AABAACCBA. I want to calculate Cumulated Total on each row. but i am not sure how to achieve this by conditional formula? the values in my sheet looks like the following,
Date ITEM TYPE AMOUNT Cumulated Total 10-Jan-07 BookA1010 -value(Book) 11-Jan-07PenA515 -value(Book+Pen) 12-Jan-07TableB1515 -value(Table) 13-Jan-07PencilA2035 -value(Book+Pen+Pencil) 14-Jan-07ChairB2540 -value(Table+Chair) 15-Jan-07SofaB3575 : 16-Jan-07RoseC2020 : 17-Jan-07Calc...A3065 : 18-Jan-07JasminC1030 -value(Rose+Jasmin)
find the attachment for reference. How to achieve this using conditional statement or lookups or someother? and i try to avoid macro.
I have a list of daily sales which I would like to have a cumulative total by month. Once the next month is encountered, the cumulative total will reset for that month again.
E.g. (please see attached file) Column C is my cumulative total. The cumulative sum will reset when the month changes from Jan to Feb.
I can achieve the results using VBA but I need to distribute my report to parties whose VBA environment is disabled. So, I need to work around this with a formula.
I have a table representing the usage of several thousand product in a market. Each row represents a product and one column indicates the frequency of use. I'd like to find out how many products represent the Nth percentage of the whole, when ranked from most used to least.
Shorter, if I want to know the Top 25%, how many products equate to the top 25% of all product frequency? ....
I would like to be able to enter a number in a single column, and then Excel adds this number to a total column each time it is updated.
This is for entering via a PDA, so I need a simple entry method, ie to enter a figure, and then keep a running total every time a new figure is entered. This would only use the one column and overwrite the number each time, rather than adding up individual columns.
The attachment shows the items listed in column A, column C3 - C10 would be where I would like the number of items entered, and as I go round, I would just update the last figure. I would like the figures from C3 - C10 to be added to the Total column D3 - D10 for each item.
i am trying to create a spreadsheet that will automatically plan a days work in manufacturing based on the items the factory is making, the different items obviously have different hourly production targets and id lke to create a spread sheet that knows how many we want to create what the targets are and how long it will take. i also want it to be able to know when it has reached the needed total and automatically plot the targets for the next product, so what i need is a way to change part of the formula when the column reaches a set culmative total
I have a sheet that contains a reference number in Col A and an associated number of days in Col B. I wanted to put a third column in that cumulatively totals the number of days based on reference number.
See the attached excel table. I need the cell E4 to keep adding the values typed in the cell D4 on daily basis.The cumulative shouldn't be changed if there is no value in the cell D4. E4 should accumulate and keep the totals typed in D4...
I need a cell that holds a cumulative sum , but i get stuck into cell self reference.
Let me explain . Imagine i have cell A1 which holds a formula : =B1 + C1
If i keep changing the values of B1 and C1 the value in A1 will be changing as well . I need to the sum up of A1 values at any given moment. I practically want
I would like to work out the cumalative value ffor each row on a sheet I have.
Basically it just needs to start from column 4 each time and then go across and take first value and then add that to the second one, take that answer and add to third one and so on. Basiaclly I need to get an end result on clolumn 25 each time. The code has to be able to count down the rows too.
This problem has come at the end of a big exercise whereby I've managed to construct a spreadsheet that automates three payment processes based on various VLookups to another file. However, I've come to a stage where I need to pre-empt a payment allocation based on cumulative totals.
I'll try and explain clearly below but I've also attached a spreadsheet showing the intended result (along with a copy without the output so that someone can add in the formula - again, if it exists.
So, this all centres around a code allocated to our clients and a declaration that they complete. Say client code "Apple1" (col E) sends in instructions to pay on a position of "650,000" (col F). Within our existing spreadsheet we have an available position of "800,000" which can be seen by totalling column G for client code "Apple 1".
So that's the first requirement - for all rows on my existing spreadsheet for client code "Apple1", I want to add the cumulative total of column G ("800,000") I'd like this captured in column H, as per my example.
We can then make payment based on their declaration, up to their total available amount. However, we need to pay them in stages according to our existing allocations (col G). Therefore, taking the first example, their declaration show's an available position of 650,000, their total position is 800,000 and the available nominal amount for that row (col G) is 200,000 - so they can be paid on that full amount therefore, 200,000 should be shown in cell I3.
So now, they've got 450,000 left to be paid and cell G4 again shows a position of 200,000, so once again, cell I4 should show 200,000.
The client "Apple1" now has a payment amount remaining of 250,000 remaining but in this instance, cell G5 is for 300,000 - so because the remainder of their available payment is less than the amount in cell G5, we should post the available payment amount in that field - 250000.
Therefore, if you add up all of column I for client "Apple1" it comes to 650,000 - the amount we have on our declaration - even though the total of their available position is 800,000.
I've included another client in the mix "Sauce2" who should show 200,000 and 0 respectively in cells I6 and I7.
Is it possible to arrive at the formula result in cell (C9) using only the cells in column A and bypassing the need to have a column B?
I originally tried =MIN(A1:A9)-MAX(A1:A9) as a way to bypass column B and have a single formula but it did not give me the same result. I was thinkging I might need to have a (UDF) but not sure. Thanks Again.
Need to insert two rows, then sum column C and E based on cell value change on Column A.
...then also would like to get the summed value of each total eg,. (starting total should be where last cell should always equal the sum of first calculated cell. D6 = C6, then =C10+D6, and C16+D10, etc...) to be summed with next total down, and so forth to end (See attached)
I have a person who was paid £1000 pension pa for ten years. I've found out that the pension should have been split 50/50 with half increasing by 5% pa. Thus in year 1 total pension would be £1000. In year 2 the total pension would be £1025 ((£500 x 1.05) plus £500)
I know that in year 10 the total pension should be £500 (non increasing) plus £814 (£500 x 1.05 to the power of ten). My problem is how do I work out a formula which calculates the total arrears due in year ten? I'm thinking the arrears due after the ten years is £314 but something is telling me it's a lot more.
Microsoft Excel - Book1___Running: 12.0 : OS = Windows XP (F)ile (E)dit (V)iew (I)nsert (O)ptions (T)ools (D)ata (W)indow (H)elp (A)boutB5= BCDEFGH5JanFebMarAprMayJunTotal6-3%-2%5%8%5%5%???Sheet1
I have this example above which i want to know what is the total % change from Jan to Jun. In the total column, the result i got is 19% using formula =1*(1+B6)*(1+C6)*(1+D6)*(1+E6)*(1+F6)*(1+G6)-1.
Is there any other more simplified or better formula that can be used actually?
Cells D 5 to D 36 are representing day 1 to day 31 of the month. clocked working hours of the employees will be entered to these cells. they are supposed to meet the target of 8 hours clocked at the end of each working day. that means on day 1 the target is 8 hours, day 2 it is 16 hours, day 3, it is 24 hours. i want to see the cumulative progress in ( percentage) on any give day. That means on each day the clocked hours should be compared with the actual cumulative target until that day.
I'm having difficulty with concatenation and the use of a string variable. On my attached spreadsheet I have a row called Must Fund Tasks. The binary variable in the cell is entered by a selection on a user form. If the value of the cell is "1" then that particular task must be funded. The code I developed forces solver to keep the binary value of 1 in that particular cell when looking for the optimal solution. This same row of binary variables is the row of values that I have solver change to find my optimal solution.
My problem is that I have another set of contraints based on mutually exclusive tasks. If there is a binary value of "1" in at least two of those cells then only one of the tasks may be funded and they are said to be mutually exclusive. In other words, if the user form indicated that tasks 1 and 5 were mutually exclusive then the binary values are Task1=1 and Task2=1 and the constraint would be Task1+Task2<=1. The code I've written looks for a value of 1 in the Mutually Exclusive row and if it finds one it adds the name of the corresponding "Must Fund" cell 4 rows above to a set called ExclusiveSet. ExclusiveSet is defined as a string and I'm having trouble with the concatenation, I keep geting a "+" out in front because of the intial loop when ExclusiveSet="" ( it returns "+$F$29+$H$29"). I'm also not sure if Range("CalcsStartcell").Offset(I + 15, 3).Formula = "=ExclusiveSet" is the appropriate way for me to return the value of the ExclusiveSet in the desired cell.
Sub constraint() Dim p As Integer, CalcsStartcell As String, I As Integer, T As Integer T = 7 I = 5 CalcsStartcell = "C16"
'setting Mutually Exclusive constraints With Worksheets("Sheet1").Range(CalcsStartcell) For p = 0 To T - 1 If .Offset(I + 12, p + 1).Formula = "1" Then..................
I'm guessing it will be some sort of nested loop but I'm just going round in circles trying to solve it. I need to calculate a cumulative value based on the following criteria:
1. Pre Qty - can be any integer value 2. Qty - can also be any integer value
Accumulate values by looking up the Pre Qty + 1 then add all quantities * values based on those provided in a table giving different to - from ranges. Attached is a spreadsheet
I'm trying to add cumulative values based on two criteria, one being a constant date, and the other being a date range.
I've attached the example where I would like to sum the highlighted values. I am trying to come up with a formula based on the criteria in cells I2:K2 but can't think of anything.
I have, for my formula, 2 constant values a and x, I then also have a variable, n. The formula I'm trying to convert into excel terms is SIGMA (with respect from 1 upto n) ((1-x)^(1-n) * x)*a. Unfortunatly thats not drastically inteligable so i've attached a picture file that should explain it in more understandable terms. Now the problem im having is, sigma is a cummulative funtion, which in this example is relative to the variable n, firstly I don't know what formulas I would have to use in order to get a sigma/summination function, and secondly I am uncertain of how to link it to a variable range.
I have one cell that brings up a random number using RANDBETWEEN and I want to keep a running total in a separate cell, but I can't figure out a formula or function to do this.
I have two rows one with the nr of weeks and another with revenues like that:....
i need to calculate the cumulative sum without inserting another row in the week that i define like an input so it could be changed.. for example the *** sum in the week 5 shloud be 900.
I would like to be able to calculate cumulative returns by selecting a starting and ending quarter from a validation list and finding the product of all the quarters between the two selected. I imagine the equation would look something like this: ...
I have a report which has a list of customers, each customer has 24 columns which represent the payment history over 24 months. If a payment has been made for that month the date and time (formatted correctly) will be populated in this cell.
Each customer has a product name attached to it so a product can appear several times. I need is a formula that shows the total payments recieved for a particular month for a particular product. For example.
I have managed to create the following flag which works a treat, it picks up a date an account was set up but looks at 1 column.
This may not be the best way to do this, but I don't know Macros or Pivot Tables.
I am looking for a way with formulas to do the following: Within a workbook the 1st sheet is the data entry. In another sheet that will total data from the data sheet is where I want to be able to total columns of data, depending on what is entered in one specific column:
Example: Data Sheet, E2:E2999 is a unit number selcted by pull down tab entry. G2:G2999 in the same sheet is where the data is.
Q: What formula would allow to total the data on the Total Sheet depending on what unit number is selected in column E on the Data Sheet and the data amount in column D from Data Sheet?
I need to set up an easy to use spread sheet for my office. It needs to be able to calculate the running total spent of fuel, as well as include any discounts we get and then calculate our total savings.So basically, total spent and total saved.
