Force Multipage Control Update
Jan 9, 2008
I have a userform with a multipage issue. On page1 I have a command button that formats cells. On page2 I have textbox1 with a fixed number, textbox2 that counts the number of formatted cells (from the command button on page 1) and textbox3 that's going to sum textbox1 and 2. So here's the issue. Lets say I'm on page2 viewing the textboxes, if I switch back to page1 and format additional cells and then switch back to page2, textbox2 does not update with the additional cells formatted. I always need to close the userform and reopen it for the changes to take place.
View 2 Replies
ADVERTISEMENT
Oct 4, 2007
How do I determine which control the user is currently modifying on a multipage form (either changing, enterying or exiting the specific control). when I use "userform1.activecontrol" i get "multipage1" as the control name but I need the actual control on the specific active multipage. (also the .TABINDEX is for the multipage regardless of the on-page control) I use a generic data-field change SUBroutine so need the control name (and the TABINDEX) to provide my SELECT CASE. (so every fieldname_CHANGE calls the same SUB [with no parameters])
View 3 Replies
View Related
Aug 23, 2007
I am creating a bar inventory/"numbers" sheet for a corporation. I have been searching on and off for a week or so to find an answer or a tutorial on what I am looking to implement into this worksheet. I want to take a userform, with a multipage control, and have the control for each tab, show me a different part of the worksheets. For instance, the first tab would be inventory, the second tab would be ordering, the third tab would be weekly numbers, etc ... I am wondering how to "add ranges to the multipage control in order to make it a "viewer". I have found tutorials on how to print, enter info into the form and save it to the sheets using a button, but I can't find a tutorial on how to implement the control on how to make tabs show the ranges. Can someone point me in the right direction on a tutorial, or maybe if willing a small spreadsheet with a mulitpage control on it, showing how to add the ranges from different worksheets?
View 14 Replies
View Related
Feb 15, 2014
UserForm1, page5. From Combobox1 I choose a city and the textboxes give me the values from Sheet3. I'd like to color in green the smallest value. for example, if for LHR I find for A-4214, B-4420, C-3127 => value 3127 to be green. The problem is I have more textboxes in other pages and some of them are colored in green also. Is possible to reffer to these textboxes from page5 only?
View 8 Replies
View Related
May 28, 2012
I'm using a multipage control on a form that has the style set to fmTabStyleButtons. So it uses buttons instead of tabs. I named one of my buttons (tabs) to Close. Can I set this up to where just pressing the Close button will cause it to exit the app not just go to that page?
View 9 Replies
View Related
Apr 22, 2007
i am trying to make the multipage form so that page 2 ,3 is password protected intially the form will open read only, with access to subsequent pages through a password.
View 9 Replies
View Related
Jun 1, 2012
I'm trying to use the Transition property for the multipage control without much luck. So far I have a userform with a multipage control on it.
Code:
Private Sub UserForm_Initialize()
With MultiPage1
.TabOrientation = fmTabOrientationLeft
.MultiRow = True
.TabFixedHeight = 30
.TabFixedWidth = 80
.Style = fmTabStyleButtons
.Value = 0
.TransitionEffect = 2 ' error here "object doesn't support prop"
End With
or...
Code:
UserForm1.MultiPage1.TransitionEffect = 2 ' same error
View 2 Replies
View Related
Oct 6, 2006
Last weeks I've had too few spare moments to answer questions, hope to pick that up soon. I have a strange problem now with some checkboxes on a multipage control.
Please see the attachment.
I want to check all the 5 boxes on a page if the box above is checked, and vice versa, uncheck them all if the box above is unchecked. I use code of Dave Hawley to loop through the checkboxes.
This doesn't work, but oddly enough, it works if I insert a MsgBox in the code.
View 6 Replies
View Related
Sep 22, 2007
I have a DTPicker on a multipage form on a userform with the following codes:
sheet1. range("Ac2").value=DTPicker1.value
DTPicker1.value=sheet1.range("AC2").value
The first line of code is in the DTPicker1_change event.
The second line of code is in the userform_initialize event.
This works fine if I move the DTPicker control onto the userform itself, but if I put the control on the multipage form it fails with the following message:
Run Time Error 35788
An error occurred in a call to the Windows date & time picker control.
View 4 Replies
View Related
Feb 5, 2009
How can I tell (in code) which is the current tab selected on a MultiPage?
View 6 Replies
View Related
May 9, 2009
I've started experiencing a strange problem. The control toolbox keeps appearing when the first page on a multipage userform is activated. I can't figure out what's causing this, and after searching the forum, with no luck, I thought I would see if anybody else is experiencing the same problem, and how to fix it.
View 2 Replies
View Related
Feb 4, 2014
I have a userform which has a number of multipage controls nested inside each. So, the parent is Multipage1 with 2 pages. Page 1 of Multipage1 has a second multipage control (Multipage2 which has 4 pages). In Multipage2, page1 there is a 3rd Multipage control (Multipage3 which has 2 pages). In Multipage2, page 2 there is another multipage control (Multipage4 which has 3 pages)...and so on! I know this sounds complicated, but I am trying to get the caption of the selected multipage.
There are commandbuttons in all of the pages, which when clicked need to return the caption name of the multipage where they sit.
I have started the following code, but suspect there must be a better solution:
VB:
With Sales
If .MultiPage1.Value = 0 Then
Hardware_Purchases_Input.TextBox6.Value = .MultiPage1.SelectedItem.Caption & " - " & .MultiPage2.SelectedItem.Caption & " - " & .MultiPage3.SelectedItem.Caption
End If
End With
View 3 Replies
View Related
Jan 30, 2009
I want to access the Properties of a number of controls in a running form, and these controls may or may not be contained in a Frame or a MultiPage.
In particular I want the Top and Left for these controls, which means I have to first find out if the control is contained in a Frame or MultiPage so I can get the reference for Top and Left. I'm ok with doing this for controls inside a Frame, but the MultiPage is eluding me. I get an error when I try to access these controls and it looks like they are actually owned by the individual Pages of the MultiPage.
how do I find out if a given control is contained in a given MultiPage?
Validate UserForm MultiPage and Frame Controls
View 3 Replies
View Related
Sep 14, 2006
i have a textbox on top of a picture box but i cannot replicate it with a new textbox or combobox.
when i place the control on the picture box it disapears?
View 9 Replies
View Related
Aug 14, 2008
Is there a way to renew / update the formula =NOW() without closing & reopening the file??
View 2 Replies
View Related
Nov 10, 2006
I want a control to be updated when I scroll a scrollbar. The scrollbar is linked to "B25" and the control, tboYYWW2, is then updated via a HLookup of the "B25" value. By the code below I just get the control updated when the worksheet is activated and not when the "B25" value is updated by the scrollbar. How to make this work ? I also attach the workbook file I'm doing the tests in.
Private Sub Worksheet_Activate()
Dim varYYWW2 As String
Dim varWeekNr2 As Integer
varWeekNr2 = Range("B25")
varYYWW2 = WorksheetFunction.HLookup(varWeekNr2, Worksheets("EDUtest").Range("WeekNrWeek2"), 3)
tboYYWW2 = varYYWW2
End Sub
View 2 Replies
View Related
Feb 4, 2008
I'm trying to set the focus back to the field that triggers an AfterUpdate event.
Private Sub myField_AfterUpdate()
myfield.SetFocus
End Sub
Code above sets the focus to the next field in the taborder instead of keeping the focus on the field (that didn't pass the validation) that triggered the AfterUpdate event.
View 3 Replies
View Related
Oct 12, 2006
Excel – Forms – Combo Box, cell updating.
I have a form (the main one) which accesses a second form, which accesses a third form. All forms have a combo box, control button and a text box.
The items selected in the control boxes are entered into cells (the base cells) in the spreadsheet, via “Control Source”. The text boxes access these cells and show the selected items, which are then copied to other cells via a macro on activating the control button in the main form.
The main form stays open while other items are selected and transferred. Some of the items may not be changed (reselected) as they may be common. The problem is that after a number of items have been selected and transferred, the base cells for the second and third text boxes do not update after a selection from the combo boxes, and they continue to show a previously selected item.
The problem can be solved by closing the 2nd and 3rd forms and starting again. What can I do keep the cells updating without closing the form down?
View 9 Replies
View Related
Mar 4, 2014
Is there any way in VBA to refer to a control in its own event procedure without referring to it by name/hard-coding?
It might be clearer to explain by a dummy code example:
[Code] ......
I'm seeking what I would need to replace Line1 with.
View 11 Replies
View Related
Jan 9, 2008
Within the ComboBox properties, is there anyway to control after "enter" his hit, you move to the right instead of down (similar to the edit under Tools/Options)?
View 9 Replies
View Related
Jan 12, 2007
I have created a userform within VBA which has a TreeView Control and a Spreadsheet control on it.
I have populated the TreeView control with data and what I want to be able to do is to drag the nodes off the TreeView control to the spreadsheet control.
I can drag onto a normal worksheet but not onto the spreadsheet control (the no drop mouse pointer keeps showing).
View 4 Replies
View Related
Sep 5, 2008
I have used the function = now() to have the most updated time but it updates a workbook when I open it in the first place. How I can avoid this?
View 9 Replies
View Related
Apr 24, 2007
I'm having a problem setting the multipage tab on a userform in VB. It's kinda weird because the code was working fine until recently, where it's suddenly stopped working properly! The only thing I can think of is that I changed versions of Excel to v2003 recently.
I want to not let the user change tabs unless the inputs entered have been error checked. My code is:
Private Sub MultiPage1_Change()
If Me.MultiPage1.Value > 1 Then
If Range("inputs!dob") = "" Then
Me.MultiPage1.Value = 1
MsgBox ("Please enter your date of birth before continuing.")
End If
End If
End Sub
The tab itself changes fine (ie. shows the tab 1 header), but the contents of the tab are actually the contents of tab 2!
View 9 Replies
View Related
Jun 24, 2008
I have had some succcess with Userforms, but I have now tried creating multipage ones.
I assumed that when I clicked on page 2 or page 3 of the multipage control, it would take me to a blank canvas, but instead it just replicates what is on Page 1. If I put textboxes and labels on page one, it repeats them on pages 2 and 3. If I delete boxes fropm page 3, they also disapear from 1 and 2!
So im unsure how to put different labels etc onto different pages.
View 9 Replies
View Related
May 22, 2009
I have a multipage (say "Multipage1") in a userform. It has five different pages in it starting from page1 to page5.
When the userform is opened, I want to have a control as to which page is being displayed first.
eg: I want the page2 to be displayed when the userform is being opened.
View 25 Replies
View Related
May 9, 2006
I am looking for a way to make a UserForm MultiPage control show no tabs.
Is this even possible?
Or is there another way to get this same result?
View 9 Replies
View Related
May 13, 2006
When I drop a multipage control onto a worksheet, the control defaults to showing/having 2 pages. I looked at the various properties and there doesn't seem to be a way to change/add to that number of pages. I know I can add pages to the control programmatically. But what if I don't want to do it that way? What if I want to set the control to show 3 pages instead of 2 at design time? Is there a way to do that?
View 3 Replies
View Related
May 15, 2006
Can you run a procedure when a particular page in a multipgae control is clicked rather than use the Multipage change control.
View 5 Replies
View Related
Feb 1, 2007
I'm trying to create a next button from one user form to another. But I can't reach there. I know that I have to use, multi page, but I don't know how!
View 4 Replies
View Related
Mar 7, 2007
In a Multipage form, the first page contains 2 DTPickers. These show the date value from the specified excel worksheet cells and update the cells accordingly if the user changes the dates with the TDPicker. These work perfectly.
If I place another DTPicker control on another page of the Multipage though, it leads to a run-time error.
As an example, the code for 1 of the successful DTPickers on the first page:
Private Sub DTPickerAccountsStartDate_CallbackKeyDown(ByVal KeyCode As Integer, ByVal Shift As Integer, ByVal CallbackField As String, CallbackDate As Date)
End Sub
Private Sub UserForm_Initialize()
Application. ScreenUpdating = False
ActiveWorkbook.Sheets("Cover").Activate
DTPickerAccountsStartDate.Value = Format(Range("B6").Value, "dd/MM/yyyy")
End Sub
There are no errors in any of the cell references etc and the formatting of the DTPicker controls is exactly the same in all cases.
View 6 Replies
View Related
