Formula to calculate a daily compound interest based on the higher rate of the two rates for the first 5 years, then after 5 years the calculation would only be based solely on the blocked rate.
View 4 RepliesI am trying to work out a formula to calculate compounded interest rates.
I have a table that is 24 columns wide (months).
1 row that will have amounts input in to the columns (these will be different amounts)
I want to have a row along the bottom that calulates the compounded interest at a fixed interest rate on the total amount that is in the first row.
I have managed to do this using a table but surely there is a formula for this as the table can become very troublesome if the input amounts change.
Ive added an image (attached) : excel.jpg‎
I am trying to set up my excel to calculate daily compound interest.
The amount is 10,000 at 0.75% per day for 6 months.
I have tried several different things with no success -
What I am trying to do is to create a formula for the attached spreadsheet - that calculates the daily compounding interest based on the higher rate of the two rates for the first five years then after 5 years the calculation should only be based solely on the blocked rate.
View 5 Replies View RelatedI have a problem calculating a total interest for an input period that has different interest rates. You can see the attached file: INTEREST.xls
I have used a function but the result comes out wrong. Can I fine tune it or do I have to change my method of calculating.
I have a column of years and a column of numbers representing annual
amounts placed in a savings account for the year. I would like to calculate
the balance of interest earned added to the balance of the account and then
calculate the interest earned on the accumulating amounts each year. The
results would be the account balance displayed in an adjoining column. So
far, I have not found a worksheet function for that. Could someone point me
in the right direction? Perhaps there should be several columns of data?
I am trying to create a calculator based on a worksheet I have. I do not know how to write a formula for simple interest calculations and for compound interest calculations.
View 4 Replies View RelatedI am trying to calculate the effective annual interest rate earned on an investment and find the results are close but not really accurate. I suspect because I have not included the frequency of interest in my existing formula
r = n * nt root (A/P-1)
where;
r = the effective interest rate
n = the number of times interest is added per year
t = the total number of years
A = the current value
P = the original value
The 2 problems I face are;
1. Confirming this formula would provide the correct answer (need maths expert here) &
2. How would "nt root" (as in sqr root, but using the product of the years and frequency) be used in Excel
I am looking for a formula which will compute interest earned (not ending account balance) for the following scenario:
1) Set $ amount (say 19250) is deposited on January 1.
2) Annual interest rate is .95%
3) Interest is compounded daily
4) Fixed withdrawals of $1750 are taken each and every month on the first day of each month
What is the total interest earned on the account? Basically, it is a issue where each month diminishes the "pool" of money earning interest. I get what's going on conceptually, but can't figure out which Excel function to use.
I would like to have an excel table that has 240 usable lines going horizontal (to the right) and vertical (down) from the starting number.
I need it to compound interest in both directions
240 is the total number of days per year I am trying to track
There should be adjustable starting amounts and compound interest
Be able to adjust the entered amount anywhere along the time line and it recalculate the amount from there on...
I am looking to calculate compound interest over a period of 10 years.
I am looking at putting a lump sum in at the beginning and contribute in monthly installments for the entire 10 years. How would I go about this.. I know there are formulas there, however I'm not a financial person at all..
I'm trying to come up with a way of calculating Money earned over time by compounding interest, but with a twist. After reaching a set amount of money, all money above and beyond does not gain interest. example:
Principal: $120 (user input value)
Duration: 9 (user input value in days, compounding daily)
%Intertest: 4% (user selected value, either 2% or 4%)
Max interest you can earn: $6 (fixed)
Max interest generating money: $150 (variable dependant on %interest, = $150 or $300)
Response/Answer is final value. I don't need the daily results like the example.
Result would be: $170.84
$124.80 (4.80 interest)
$129.79 (4.99)
$134.98 (5.19)
$140.38 (5.40)
$146.00 (5.62)
$151.84 (5.84)
$157.84 (6.00 reached the max interest level)
$163.84 (6.00)
$170.84 (6.00)
my equations I have so far only do one (below 150 total) or the other (above) but not both. and its just a regular formula: =IF(P<M,IF(P*I^D<M+1,P*I^D,"over limit"),P+6*D)........................
I've found this calc but it doesn't compare to my particular scenario/goals: http://dinkytown.net/java/InvestmentDebt.html. The major difference is that this dinkytown calc requires a new loan to be put in place and I am not in a position to refinance my current mortgage. My plan is to pay an extra $267 (b3) to the mtg (b4). It will take 128 months (b6) to pay off the mortgage. After that point, I need to calculate what the newly freed capital (b5) would do if I put in an account (i.e. a CD or a simple US savings account) that had an Annual Percentage Yield (APY) of 1, 2, and 3% for 20, 15, 10 and 5 years. I thought that I had the right formula in place for cells b7:b8 should the account earn a 0% rate of return, but I think it's faulty since it gives me a negative number for 10 and 5 year accumulation periods.
View 2 Replies View RelatedI have a grid to determine interest rates. The are add ons to the rate that are dependent on two factors - the credit score and the Loan to Value percent or LTV, both of which are shown in terms of ranges (720-739, etc). See the screen shot below.
I have already written formulas for converting the score and LTV to the ranges as they appear on the sheet (ie, if you type in a score of 722, the formula converts it to the range of 720-739.
What I need to do is this - when the score and LTV are input and determine which set of add ons come into play, I need the sheet to take those add-ons, identified by an x next to it at the top of the page, and add them to the base interest rate, giving me the final rate. Again, see below to make this more clear.
I've thought of using VLookup, but I don' think that would be applicable here.
What's the best method, and can you give me an example of what a formula might look like?
Loan Level Pricing Adjustments
Base Rate 6.25 6.25
Credit Score 741 >740
LTV 60 740 Cash Out 0 0 0 0.25 0.375 0.375 n/a >740 Investment 1.5 1.5 1.5 2 2.5 2.5 n/a >740 2-unit 0.5 0.5 0.5 0.5 0.5 0.5 0.5 >740 3-4 unit 1 1 1 1 n/a n/a n/a
720-739 all -0.25 0 0 0 0 0 0 720-739 Cash Out 0 0.125 0.125 0.375 0.5 0.5 n/a 720-739 Investment 1.5 1.5 1.5 2 2.25 2.5 n/a 720-739 2-unit 0.5 0.5 0.5 0.5 0.5 0.5 0.5 720-739 3-4 unit 1 1 1 1 n/a n/a n/a
I have a column of 30 cells, each showing retirement dollars earned based on years of service (cell 1 = year 1, etc) and salary. Here is the predicament: A new hire is brought in with 10 years service, stays 5 and then quits. How do I change only cells 10-14 reflecting his/her salary and retirement dollars? Remember, cell 10 is the first year for the compound interest, cell 11 the second year, etc. I currently use the following formula for cell 10 (compounded salary from cell 9 * (1+.05)^1). Cell 11 is (compounded salary from cell 10 * (1.05)^1.
View 5 Replies View Relateddoes anyone know how to calculate the interest so it matches this? .......
View 13 Replies View RelatedSome years ago I came across a formulae to calculate Daily Interest on a Building Society Savings account in the UK. I have used this since but find my calculations never work out the same as my BS, although to my advantage! It is =B3*B4/360*DAYS360(B5,B6,TRUE) Where:
B3=Capital
B4=Interest Rate
B5=Starting Date
B6=Finishing Date
For some reason the formulae uses 360/year and not 365/year. Using both still gives wrong answer.
I create this spreadsheet as a loan schedule using average daily balance method. (1/payment is constant, fortnightly 2/interest is 5.5% per annum)
In the interest column, at the beginning of each month ( when the day is 1) the interest will be added up from calculation of previous month daily balance.
My idea is that at interest column(let start at 1/08/2013) if (day(A49)=1, average the 30 or 31 cells above E49, 0).
I will manually make adjustment for February where 28 or 29 days applicable.
formula is needed to get excel to calculate all A rates seperate from B rates and C rates example 10 A rates @ 50.00 9 B rates @ 40.00 and 6 C rates @ 30.00 so although the rates could be mixed up (not following in any particular order the result which I would like to appear on a separate spreadsheet would be A = 500.00 B = 405.00 C = 180.00 then to get them to total up = £1085.00
A 50.00
B 40.00 then separate sheet with answer a 100.00 b 40.00 c 60.00
A 50.00
C 30.00
C 30.00
I have the following scenario:
Cell A1 shows a specific value (pivot table value), but same A1 cell value might change if pivot table is refreshed.
So I am trying to automatically copy A1 value to another cell but I need to keep track of each value when pivot table is refreshed.
I have been researching about =Value formula, but it does not work properly since A1 cell reference will change each time pivot table is refreshed.
Have a look at the attache example. I have inventory items which have a fixed value. I have several quantity columns to reflect various inventory positions. (OnOrder, WIP, ATP, ATS, OnHand, PAB as at date()...)
At the top of the sheet I need to show sum of quantities and sum of values. In order to compute the values currently I need to hide columns to the extreme right to do the math on a row by row level and then sum the rows and copy the the value to another cell. In this case the cells with yellow background.
Is there a way to be able to write a formula that would return the sum of the qty multiplied by the value without adding an additional column. I would need to function like with filters as well (like =subtotal())
See attached spread sheet as its a difficult one to describe
We are looking to apply labels to a cell depending upon criteria, the spread sheet contains the scenarios.
I have selected a custom autofilter for one column of my data. After that, I want to use the top 10 autofilter in another column, but this appears to filter the top 10 overall, not the top 10 of the custom-filtered records. My data is transformer sizes.
First I custom filter the secondary voltage column to get only distribution transformers (less than or equal to 480). Now I want to know the 10 largest distribution transformers, but the top 10 filter on the size column makes all the records disappear. I believe it is selecting the top 10 overall, and it happens that none of the top 10 have secondary voltage less than or equal to 480. (When I change the custom voltage filter, I can get anywhere between 0 and 10 records for the top 10 by size.)
This seems to be an aspect of Excel, not an error. So far the workarounds I can see are:
1. paste the custom filtered data into a new sheet and then do the top 10
2. use the custom filter, sort descending by size, and count 10--but this problem was first brought up by someone doing the top 100, so this is not preferable.
Does anyone know a better solution that will make it easier to manipulate this data frequently?
I am trying to calculate the compound annual growth and my starting point is a negative number. The example is that I have (273,000) for the YE 2003 and have Growth to the amount of +767,000 at YE 2006. The formula I have been using for other calculations where the starting point is positive is =POWER(J23/C23,1/O$1)-1. Where J23 = a positive amount and C23 = a positive number. This formula works fine, but when C23 = a negative number the formula does not work and the % does not make sense.
View 6 Replies View RelatedIm trying to work out the formulae or fuction that will work out the monthly compound rate of a loan.
The loan details are £140,000 at 7.55% APR for 20 years.
i have a bunch ofdaily rates back from 2005. sometimes ill have one or even 2 or 3 missing rates in a row. when there is a blank rate, i just want excel to calculate the average of the date below and the date after. right now, ive just been going manually to each missing date's rate and calculating the average.
View 9 Replies View RelatedI am trying to create a conditional formula. I have multiple workers that work for different $$ per hour. I am keeping the hourly rates on one page for security purposes (the person that is going to be updating the hours worked is not very computer savy and they less they have to type the better) and the hours on another... I want copy a formula down the page that will calculate the hours to the hourly rate. The issue is that i want the formula to look at all of the hourly rates (assume they get raises) for Joe and multiply the most recent hourly rate times the hours... in addition I don't want the formula to re-calculate when a new hourly rate is put into the hours sheet.
Example
Jan. 1 joe works 8hours at $10 per hour formula in A1 (or wherever) calculates $80
Jan. 2 joe gets $1 raise
Jan. 2 Joe works 8 hours at $11 per hour formual in A2 calculates $88 but formula in A1 maintains the $80 and does not calculate the $1 raise.
There is a database of rates, stored in an excel table. There are dates (in the format MMYY) and corresponding currencies (100 in total)
I would like to have a custom function where I could type
=RATELOOKUP("EUR","0911")
And the corresponding rate will appear
The excel file with the rates is stored read only in a locked folder on the network so the format and layout will not be affected
How could I macro this? - then turn the result into an addin so that everybody can take advantage of this.
I have three columns. The first column contains a certain category ( i.e. Cat 1, Cat 2, ect.), and the second and third columns contain numbers referring to that category:
Ex:
A1 B1 C1
Cat 1 6 5
I want to be able to find the success rate (C1/B1), but I want Excel to recognize what category it belongs too so I can split the success rates into categories in a different location. What function, if there is one, do I use, and what information do I need to plug in.
I know that Excel has a function to import currnecy rates from the MSN Money web site. But MSN Money doesn't support all currencies. I would like to build an excel sheet where a user can maintain the currency codes and the currency rate is being fetched from the internet. Does anybody have a suggestion from where I could get currency rates into Excel?
View 9 Replies View Related