What I would like to do is for each worksheet run "descriptive statistics" in data analysis on the data in column Q, which varies in length, and then copy the "mean, median, SD, and skewness" in the results down columns T:W to the last row based off of a count in Column Q. Finally, calculate the "zscore" in column S based off of the formula in cell S2 in the attached workbook.
View 8 Replies
want to make a macro to do a 'descriptive statistics data analysis' of column b and put the results in m1 to n18.
basically doing this but in a macro.
add in= tools /data analysis/ descriptive stats
I have recorded it doing this, but it for some reason can't do what it wrote.
I am captain of a Dart Team in 2 different leagues. I have a excel spreadsheet that does some calculation for me (Wins, Losses, Percentage) when I manually enter the numbers. I have just created a workbook with multiple worksheets for each week of the season, including playoffs, and a sheet for overall and print. I want to be able to input the data for each week and have it auto calculate on the overall page and auto populate the print page. The overall page will have all the stats, wins singles games, wins doubles games and wins 3 man games, along with percentage in each category. I am pretty sure I can accomplish this task. The problems I am having is:
1. Adding wins and losses based on player number, I have one cell with a players number and I will put a 1 or 0 in that cell based on a win or loss. Off to the side I have the player roster with card numbers and a win column and loss column. I would like excel to see the 1 or 0 in the main column and add the appropriate to the roster column, calculating total for the night. Then adding that to the overall page.
2. The print page, I want a easy to read page that displays each players, wins and losses for each category described earlier and averages through each week displayed nicely to distribute each week. Would I have to export that page to word? I want to display wins and losses as 14-7 without it calculating it.
If someone can point me in the right direction that would be awesome. I can do simple stuff in excel, never had to do anything like this before, wanted to do it for a while and just didn't know where to start. What formulas to look up, not familiar enough with the nomenclature to look for the correct functions to accomplish this task, or if it's even possible.
I have many spreadsheets with sports stats. I pulled the information from the web. So on one page I have the stats. The next page I want to be able to type the teams name and have excel pull out all the stats I want. Makes it easy to compare teams stats that are playing each other. Is this possible I tried to use most of the lookup functions but I just cant figure this out.
I will attach the sheets.
I seem to find myself stuff on this project yet again, JBeaucaire was able to help me to get this far im hoping you will be able to help me with the next step of this project
The doc iv attached is able to give me the differnece between low and high numbers with this example low numbers being between 1-18 and 19 – 36 high numbers and 0 being a break if u test the project u will understand im now trying to create a pattern of 3s were im abe to get stat hits on for example the patterns of 3s are the following(numbers) low,low,low-low,low,high-low,high,high-low,high,low every time I type in the numbers 3 times in a row on the 3rd one I want it to show as a hit(success) if the 3 numbers I type in are not a hit like high,high,high I want it to show me a miss if it is a pattern I want it to show a if theres a 0 it must rest like from 0miss,4hits,o breaks to 0miss,0hits,1break and so forth im also wondering if at another part of the form it can keep the total stats like iv added In the doc
Is there a way to automatically update football stats from a website. I want to update many different stats each week of player and team performances. Can I specify a website to go to update the info and prefer to do it each Tuesday. Let me know if more details are needed.
View 1 Replies View RelatedI have a spreadsheet full to the gills of patient information. I have a separate sheet with information from the first spreadsheet like counts of a certain type of tests or diagnosis codes using a 'countif' function. This is based on all the info in that first sheet. I want to make a second sheet with the same basic setup, but only from the patients who visited during this fiscal year. Is there a code I can use to make this happen?
Let's say the date of the visit is in column A and the test type is in column N. The code I'm already using is =COUNTIF(Info!N:N,"*TestName*") How do I get this to return results only if the date of visit was within the fiscal year?
I am new to pivot tables and charts and to build.... I heard that the best is to use pivot tables but no clue how to do it I have tried but no luck....
How can I see the following information in chart?
-Non con close out time by person- so who is failing to close out on time in this case is completion date
-Frequency of reports by area/ shift
-Number of reports by month, split into critical/major/minor
-Main reasons for reports so trend of type of record
I use a workbook that records data centered around course referrals.
The workbook also has a stats page. It records Instructor stats but needs to be in the form mostly of percentages.
In Column D within the page Stats I need the cells to show the total number of "YES" that each Instructor has achieved from their number of pupils in the Sheet Data.
Column E and F in Stats need to show the percentage of Yes and No of each Instructor from Column D in the Sheet Data.
Column G In Stats needs to show the number in total of Referrals made by Indivisual Instructors taken from Sheet Data.
Columns H,I and J in Stats need to show the percentage of referrals to OBT,Kaya and HWal made by the Individual Instructors taken from Sheet Data.
Finally in Stats, Columns K,L and M need to show the percentages for each Instructor of their Leave Reason again Taken from Sheet Data.
Usually there are several hundred entries and at the moment I do this manually with a calculator.
i made another thread about this but this one is more detailed.
all my questions are in the attachment excel thing, on the main page.
I having trouble trying to find the right formula to display statistics onto a 'Stats' page for my horse racing results from each month.
On the Stats page I have a summary of each month where I can view winners loosers, profit and loss, and the different types of racing (eg Flat and Jumps,Sprint, Non-Sprint).
For January I have two rows on a column for Sprints and Non-Sprints here I want to diplays the results (selections,won,lost) for each. The infomation on the January is all in date order and sprint races and non-sprints are all mingled in together. How do I display the infomation for sprints and non-sprints seperately on my stats page??
layout so far: (how it should be)
Stats page
racetype|selections|won|lost|placed
Sprints | 2 | 1 | 0 | 1
Non-Sprints | 3 | 1 | 2 | 0
Jumps | 1 | 0 | 1 | 0
January Page
RaceType|Result
Sprint |placed
NoneSprt |won
Jumps |lost
NoneSprt |lost
NoneSprt |lost
Sprint |won
I have used the "sort" function on many occasion, and I am now stumped as to why it wont work
I have a table with 9 columns: Team, Games played, Games won, Games tied, games lost, goas for, goals against, diff and points.
Each of the collums and rows have different calculators in them.
I want to sort each time the stats are modified, to show who is is first place, second etc. Thus the sort is by Points first, then Diff.
I'm struggling to find a way to index data in an array that meets certain matching criteria. I am looking for an employee's rate on a given day by searching a database that lists the dates that an employee's rate was changed. I was hoping to solve it with a crafty index and match array formula but have been unable to find something that works so far. I have attached a simplified example of what I am trying to do.
View 2 Replies View Relatedbuilding a spreadsheet to track instructors' classes' test scores. I have 3 basic variables: 1.) The instructor's name 2.) The course taught, and 3.) The classes' scores for that particular course. The 3 courses each have 3 different variations of the end-of-course test (9- total tests.) On the last page of the excel spreadsheet, I have a block for each of the instructors. I've been trying (with no success) to keep a running average of each instructor's class test average for the 3 courses. The part that is stumping me is associating the instructor's name with their class average, and then averaging all of their grades on that page together; the main reason being that this document is living, and new grades are entered almost daily. I tried using variations of the count function with no luck, other than to tell me how many times a particular instructor has tested in a particular test. Please help, I have the feeling that the function I am looking for is way-above my skill-level in Excel.
View 9 Replies View RelatedI have a data table with all my data in it. I want to be able to filter the data, and have a column automatically calculate a running (or aggregate) sum of the filtered (visible) information in a particular column of the table.
If you glance at the attached sample spreadsheet (in 2nd post!), you will quickly see what I mean. I am searching for a formula for column L that will caculate a running sum for column K. In column T, you can see the results that I'm looking to reproduce in column L. Each cell in column T simply adds the K column value for that row to the previous value in column T (the cell above). However -- to my knowledge, and as in this case -- the formula for column T can only be copied down the column AFTER the table has been filtered.
1- Open enclosed file.
2- Run Macro1.
3- Wait some time completing running Macro1.
4- Run Macro2.
5- Wait some time completing running Macro2.
6- Look MessageBox to see that what is Macro2 running time. (Note: My Macro2 running time is 06 minutes and 49 seconds)
My question is how can I decrease Macro2 running time ?
I am open all ideas like copy data to NotePad and paste again excel etc.
I want to zero out or blank out my running balance in the columns where I do not have an amount entered. So instead of having my running balance total run all the way down the spreadsheet, I want it to be blank at the first cell where I have not entered in a new bill. I have attached an example of what I am trying to do.
View 2 Replies View RelatedI have these values in one column
706
706
706
512
512
12
12
12
12
In an another column I have same values and in the next column some more values that correspond to the previous values
12 red
512 blue
706 orange
I need a formula that can automatically copy those text values according to number values.
706 orange
706 orange
706 orange
512 blue
512 blue
12 red
12 red
12 red
12 red
I have tried =lookup and some variations of =if, but no good result so far.
I have a command button. When the user clicks it, it needs to dynamically refresh the data in Excel.
I have a SQL server running on the backend. I have been successful in establishing a connection between the Server and Excel and am able to query the data required for me.
FyweekProductRegionHandledAbandonTransferred
These are the columns in Excel. Now i need to start copying from SQL to these fields row by row till the end of the record set
I need VBA Code that will copy numerical values (including formulas) i.e excluding text in column J and to paste these as values in column F.
I'm trying to work out to most efficient way of making a quality monitoring system which uses traffic lights to show problem products.
The traffic light system need to obey the following "rules".
Each product is tested once daily When a product fails once it moves to Amber, When a product Fails twice in a row it moves to RedOne pass when a product is in Amber Status, will reset it to green.If a Product is in Red status, it much have 3 consecutive passes to reset to Green.
I have tried to use array formulae to look up a column for previous values in the past for this sort of thing, but with 100000+ rows it runs far too slowly.
Banana Problem?
Product
Result
Traffic Light (0=green, 1=amber, 2=red)
[Code].....
Basically what I need is to find a row (I'm doing it by matching the row title that is 'BALANCE'), then I need to find the max value in this row (the problem I'm having is that the row number is not constant), copy that value in another cell and copy the name, that is located in the same column, next to the previous copied value.
View 2 Replies View RelatedI'd like the following code to do is to go through each worksheet in the workbook and copy the value of the formula in cell S2 down the S column to the last row based off of a count of rows in column B. It's not working quite right and was hoping someone would be willing to correct it.
View 4 Replies View RelatedI have a file where I have few sheets (link to file below). Sheet zrzut is dropdown from other system - updated daily. Sheet Productivity is filled with data supporting to group data and add conditions (for example column "I" in "zrzut" sheet). Sheet "Vena" has data from "zrzut" based on condition in column "I". Sheet "VENA_PLAN" has the same data as "Vena" but only values - I need only values for other actions. The thing is my current code replaces old data with new, but what I would like to achieve is to have new data stored below old. For now code looks like
Code:
Sub PlanVENA()
Application.ScreenUpdating = False
Worksheets("VENA_PLAN").Range("A3:H300").Value =
[Code]....
I have a cell "A1" that changes values. Every time "A1" gets a new value I want to copy it the the cell below the last value in Column "B". Assume "B1" contains a column name.
I want to copy A1 to B2, then copy A2 to B3 when A1 gets a new value.
Then I want to copy A1 to B3 when A1 gets another new value and so on.
I have a "weekly"workbook that is link to 26 workbooks the weekly sheet updates percentages from the other workbooks. What i am tring to do is I have a range "S9:S35" that pulls the percentages from the other workbooks I need it to copy the value of that range to "T9:T35" only when promted too(msgbox) in both cases. So that way if a workbook gets opened it doesnt automaticlly update "s9:s35" and "t9:t35" does'nt update when weekly workbook gets opened.
View 9 Replies View RelatedI have a large list of data including subtotals. I want to copy and paste just the values of the subtotals to another worksheet. I have tried collapsing the list to Level 2 and copying/pasting values but this still carries over the whole list.
View 3 Replies View RelatedI have a Sheet in which the data is calculated by changing the Sheet reference and also by the period..
Now I need to transfer this data as values, however there are certail cells which are merged and therefore I get a prompt as I cannot paste as values using Paste Special-> Values..
I have a pair of workbooks in which one calculates a number of values and I want to store the values only in the other.
I would expect to be able to highlight the range of the calculated cells in the source workbook, Copy and then Paste Special | Values in the other.
Both the source and the target contain some merged cells. When I try to do the paste, it complains that "this operation requires the merged cells to be identically sized".
They are identically sized.
I have even done Paste Special | Column Widths to guarantee they are identically sized. It doesn't complain about the merged cells then; in fact, it doesn't complain about the merged cells with any of the other paste operations, only with Values.
I have been able to repeat the behaviour with a very simple example. See the two attached sheets. Try pasting Values only of the range $B$2:$D$4 from either one to the other.
When I first created the samples they worked. What seemed to triggered it is I changed one of the merged column widths by one pixel, tried expecting it to fail (and it did), changed that column width back again and it hasn't worked since. As I said, I even tried pasting the Column Width to the target, which it appeared to do successfully, but it hasn't helped.
Now, the attached examples are only to show the principle of the problem. They are very simple and there would be a myriad alternative work-arounds for them. In my original case though there are many formulae over a much larger range and I want other people to be able to paste values without having to follow complicated instructions, so I am not looking for work-arounds unless someone has a mind-numbingly simple one that my numb mind has overlooked.
The only other way of solving the problem that I can think of would be to write a macro that copies cell values individually, but I'd rather not do that because I know these people: they will get narky about having to enable macros. It will be "against organisation policy" or something.
Is there any way of resetting the target workbook so that it will receive the values from the source?
I am using Excel 2007.
In cells A1 and B1 I have numerical values, e.g. 50 and 12 respectively. Cell C1 calculates the product A1*B1 (= 600). In another cell, say D1, I want to display a statement like “50 x 12 = 600” with the 50, 12, and 600 taken directly from cells A1, B1 and C1, without re-entering them. If I change the 50 to another value, say 70, then I want D1 to read “70 x 12 = 840”
