trying to update pie charts via vba. This is working fine, but I have a problem with the data labels. The number of categories can change each time the macro / data is run. This is as it will be for different customers that takle different products.
When the data labels are remapped, those with a small percentage end up placed untop of one another. I have already played with grouping these small percentage together into an 'Other' Category which works fine, but I know I will be asked to split this out.
Is it possible to add a condition that states 'DATA LABELS MUST NOT OVERLAP' - or is there some way of working around this to the same effect...
I have a Column Graph that will be changing automatically as the data is changed. My problem is that for one set of data the chart looks fine....but if a number becomes negative the bar will overlap with the data labels at the bottom and cause it to be unreadable. I am not able to resize the x axis area or move the labels down any. Is there anyway to make the labels adjust automatically?
Column A is a list of Sales Reps over 100 of them with different names. Column B is a list of Products attached to the Sales Rep. For each Sales Rep, it can vary from 5 - 10 different products
I want to find out whether any products are assigned to the same Sales Rep. How do I do so?
I am trying to figure out a formula in L3 which is the calculation of overlap of region1 and region2. The top row is the number of days. What formula can I use to calculate the percent overlap? The numbers in column L show the expected result.
I have two userforms with a label which displays CompetitorID. I want to transfer content (displayvalue) from UF1.label to UF2.Label. I know labels don't have a value property but want to simply know if it can be done as presently I'm getting run time error 380, can't set property value.
VB : HeadEntryForm.lbCompID = Me.lbCompID ' trf selected competitor ID to ID field on HeadEntryForm
I have a spreadsheet with a customers information and various parts we make for them. I need to be able to take this information and incorporate it into a label format. I need something quick and easy as there can be 150 parts per customer
im trying to plot two series of data on the same chart, as a bar chart, say for e.g: how many people eat oranges on any given day in a month on the primary y axis and how oranges 1 person eats in day on the secondary y axis..... thats all fine but when i add the series as a bar chart is overlaps the bars.... each series is on the correct axis i just dont want them one behind the other, is there a way i can have them next to each other. edit*based upon the comment below i have attached the image*edit
I want 2 cells that are not next to each other and that contain times of day to highlight only if the times overlap, I cant figure out how to make the conditional formatting do this...
I am trying to get two shapes to butt up to each other. Unfortunately the shapes either leave a small gap or a slight overlay. I have tried using Ctrl + arrow key to move in small increments, but that didn't work. I have also tried adjusting the width of the rows, but the rows jump backwards or forwards to a number instead of staying with the number I entered. I want to create a seamless shape out of many different shapes.
I have a userform in Excel and I would like to have a label calculate from the sum of 3 different labels. I have tried a few ways of which none worked.
This is what I currently have. This returns $0.00 in the label value but does not calculate...
Code: Public Sub TotalCACost() If TextBox12.Value > "" Then Label685.Caption = ""
[Code]....
The reason that I have it as a public sub is that I am calling it to Private Sub extBox12_Change() as well as a couple of other textboxes so that when ever TextBox12 or the other textBoxes gets changed, the value will recalculate. The "other textBoxes" change the values of label443, 444, 445, 385, 386, 387 etc..
I am trying to determine the total hours of downtime accumulated when there are 2 or more machines down during the same time period. To do this, I need to be able to determine if at any point there are 2 or more pieces of equipment down at the same time, and if this is true, how many hours were overlapped. The attached spreadsheet shows how the data is presented.
I created a userform where if a value from cell x is true then the label caption changes to value in cell z. While everything works fine, the label caption does not seem to appear in my userform until i click on the label. Is there anyway that it can appear automatically once the userform opens?
Also example of my code is:
Private Sub EventDateResult_Click () If Range("A5") = "1" Then Me.EventDateResult.Caption = Range("N4") End If End Sub
I have a plot that shows the position of a drifting buoy in the ocean. I have created a second series that is just the most recent position of that buoy. Everyday, using VBA, I update the chart 2nd series to point to the location of the new lat and long. For this second series, which is only one point, I have data labels turned on. I replace the data label text with the date and time of that latest position. Here is my problem. I can not find a way to format the date. No matter what I try, it has the format mm/dd/yyyy hh:mm AM/PM. I really just want it to be a 24 hour clock (mm/dd/yy hhmm).
I have tried forcing the format of the variable date_of_latest_pos, I have tried changing the cell format that contains the actual date and time...
I have a spreadsheet with rows of data. Presently, there are three pairs of columns. The first column in each pair has a label (E, F, R). The second column represents the number assigned to the label (e.g. 30, 40, 60, 70). The labels may appear in the first column of any of the three pairs. I would like to reorganize the data in three columns, which are headed, E, F, R, with the associated number underneath the heading. I have attached a sample spreadsheet showing the desired results.
anyone know how to display data using label on userform? I tried using offset but it doesnt work. The data I want to display is in column G. How do i go about that?
I have a spreadsheet that has about 40 pivot tables that use label filters for filtering HH:MM and "greater than" selection. When I do a refresh, I have to go back and reset the label filters. Is there any way to not have to re-do every label filter after refresh? I have looked at all the settings and didn't see anything in there that looked like it would work. Maybe VBA?
I have one series on my chart set as column type with data value labels. I have another series as line type to create a benchmark line across the chart. The chart is interactive where user can select 1 of 20 units. On some of the units, the labels are overlapping the line type chart and causing a poor display
I'm working for a local authority who have been given a mass of survey data. In this particular task, residents of each small district within our area have been asked their levels of satisfaction with a service, and how important they think that service is. I want to plot these two values against each other using a scatterplot, and label each service.
Excel does not automatically allow this so I used a very good sheet from the forums here: Attach labels with names to the points in a scatter plot. It's the top file, and works well. However, I can't seem to customise it for my own data.
Problems include:
- Excel often freezing when I try to run it - Not all the data being picked up for the chart - Incorrect labels being picked up..........
I am new in Excel. Recently I have to copy a cell data from Pivot table (example value in B1 cell) to new sheet by this week. My problem is this value could move to C1 by next week & so on. I try to use the column label instead of hard coding like cell column name (B1).
I have a bunch of raw sales data, by individual, which I would like to quartile to determine who is performing at which level.
Not all of this data should factor into the Quartile - a T/F "Exclude?" column flags the individuals who should not count in the quartile for any given month.
I then built a pivot like this with the Row Labels nest like such:
Exclude Year Month Agent
What I would like to do is define a formula that will quartile all of the agents where Exlude is False, Year is 2011, and the Month is January. And I would like this work going forward, so manually defining the range each month would not be a fix.
What do you all think? Is there a way to do this? To tell it to only quartile the individuals for each month?
I have a simple line chart but I want to add an text description to each of the points. The data is driven by a pivot table so the text needed may change based on the drop down options.
If I was using the below data I would want the line graph drawn using the date and value, but the data label at each point to state the description.
Date Value Description 01/01/2010 90% Text A 01/02/2010 80% Text B
I have plotted a chart through VBA and I am appending some information to certain data labels. This appended part is being turned a different color depending on if a corresponding value is less than or greater than 0.
Code: For i = 1 To cht.SeriesCollection(1).DataLabels.Count If ws.Range("C" & i + 1).Value < 0 Then[code]....
In stepping through the code, I notice that it works until the color switches twice. So for instance, if the first 3 points are below 0, it turns the appended part of the data label red. Then the next point is above 0 and it turns it green. Then the next point is below 0, and at this point it turns the appended part of EVERY data label red (overwriting the previous green one). It keeps going like this until all of the data labels are either red or green, depending on whatever the last value is as it just keeps overwriting.
I make a bar chart from series of data from cells.
The data consist of values that regarding of students achievment in a test. On the cell if the value is 56.67 and on the data label is shown 56.67.
When the cell value is 50.00, which then I've change the format of the cell to custom format to 0.00;; so it only show 50 but on the data label of the chart it will show 50.
Even after I change the format of the data label it will still show '.' At the of the value.
How to hide the '.' On the data label if the decimals value is .00?
I would like to display the latest data label value for a data series So if I update my table for period 2 the chart should update to display only this value. Then period 3 and so on Workbook attached
I am applying for a job as an executive assistant and before the interview I have to complete a "test." I am having trouble with one direction. Here is the question:
"10.Apply series name and legend key in data labels to the Star data series. "
I have included what I think is the correct answer, but I am not sure. It is under the column chart sheet.
I think that this is probably rather simple, but the answer is eluding me, I cannot find anything that helps online either. I have a set of data that looks similar to the sample below, however it is quite a bit longer. I would like the 'Effect' as the X axis, with the 'Score' as Y. This basically shows three columns, which is fine. However I would also like to use the 'ID' as the label against each plot point and I'd like each plot point to look the same.
The problem I am having is that to get the labels to show, I am having to add each series manually, which is rather time-consuming. Is there a correct (faster) way of doing this as I think I'm missing something obvious!