I have a simple line chart but I want to add an text description to each of the points. The data is driven by a pivot table so the text needed may change based on the drop down options.
If I was using the below data I would want the line graph drawn using the date and value, but the data label at each point to state the description.
Date Value Description
01/01/2010 90% Text A
01/02/2010 80% Text B
How do I name my data series in a chart so that the name consist of both a cellreference and my own text?
Example: "Name" & Sheet1!A1. If the value in A1 is 2 then the series name shold be Name2
I make a bar chart from series of data from cells.
The data consist of values that regarding of students achievment in a test. On the cell if the value is 56.67 and on the data label is shown 56.67.
When the cell value is 50.00, which then I've change the format of the cell to custom format to 0.00;; so it only show 50 but on the data label of the chart it will show 50.
Even after I change the format of the data label it will still show '.' At the of the value.
How to hide the '.' On the data label if the decimals value is .00?
I'm using MS Excel 2010
I think that this is probably rather simple, but the answer is eluding me, I cannot find anything that helps online either. I have a set of data that looks similar to the sample below, however it is quite a bit longer. I would like the 'Effect' as the X axis, with the 'Score' as Y. This basically shows three columns, which is fine. However I would also like to use the 'ID' as the label against each plot point and I'd like each plot point to look the same.
The problem I am having is that to get the labels to show, I am having to add each series manually, which is rather time-consuming. Is there a correct (faster) way of doing this as I think I'm missing something obvious!
IDScoreEffect
12.11
21.92
31.33
41.81
51.53
61.72
72.33
81.42
92.21
102.13
112.12.................
I have 6 pivot charts within a document. I use a macro associated with a button to refresh the tables and therefore the data displayed on the charts.
However, each time I refresh the data, the 'data label' font size also refreshes. What is particularly odd is that 5 of the charts are pie-graphs, of those 5 graphs, the font size only resets on 4 of them (with the data labels in a single chart staying at my desired font size).
I can manually put the font size back to that which I desire but I'd rather it just didn't change in the first place.
I've had a look to see if there's any noticeable differences between the 5 charts but there's nothing which I can find.
I'd be happy to run a bit of VBA to set the font size as I want it, if there isn't a better solution.
I'm working for a local authority who have been given a mass of survey data. In this particular task, residents of each small district within our area have been asked their levels of satisfaction with a service, and how important they think that service is. I want to plot these two values against each other using a scatterplot, and label each service.
Excel does not automatically allow this so I used a very good sheet from the forums here: Attach labels with names to the points in a scatter plot. It's the top file, and works well. However, I can't seem to customise it for my own data.
Problems include:
- Excel often freezing when I try to run it
- Not all the data being picked up for the chart
- Incorrect labels being picked up..........
I'm using the code below to create a pie chart and the code works fine.
[Code] .....
However, I now would like to change this so that I can add the word "FTE" at end of this part of code which creates the 'Value' data label.
[Code] ....
I've used Rob Bovey's Chart Labeller a lot recently, but this morning when trying to add some labels, I get the error message
"Unable to get the Name property of the Series class (bGetSelectionIndexes())"
Is there a limit to the number of series it will work with?
I have a number of charts (mostly pie) I don't have a legend, but I do have "Show label and percent" selected.
When I add in new data the actual chart updates to show the right sized pie slices... but the values on the labels don't update as well. I can't figure out how to make that happen?
I have a workbook, which I use for different departments that displays a number of different pie charts and I have found that a particular pie chart omits a specific label repeatedly. The pie chart displays the wedge within the chart itself, but does not display the label. At the moment I have data labels with percentages. All other labels display, of which there are 7. I found a solution that fixes the problem each time it arises and that is to select Chart Tools/Format/Series 1 data labels and then Format Selection. When I then select any data label, I click on "Clone Current Label" and the missing label appears with the correct percentage amount. I use the workbook for multiple uses and rather than have it present as a template (*.xltm), it is a macro-enabled spreadsheet (*.xlsm). Could this be related to the problem?
View 2 Replies View RelatedWhen you hold your mouse over a bubble on a bubble chart, it typically displays the x value, y value and size value. Is there any way to add other captions to display? For example, if my chart is based on sales data and I'm plotting a point based on ease of probability (x axis) and dollar value (y value)....I'd also like to see the initials of the salesperson assigned to that prospect when I hover over the bubble?
View 2 Replies View RelatedIn the attached spread sheet I have created a scatter plot. How can I label each of the markers with its appropriate label from Column A - the Company Ticker. When I right click to show data labels it brings back the incorrect column. Also is there a way once the labels are brought in to put them in the circle and so that the chart doesn't look too clumped together.
View 2 Replies View RelatedI have created a population pyramid and want to add another chart on the secondary axis which I can do. The part which I seem not to be able to complete is getting the line chart secondary axis to read from the primary y axis. It seems to add a new axis, even when I delete this the line chart does not read correctly.
View 1 Replies View RelatedI want to automate the Display labels in my Charts using VBA Coding…
I would need to use this small code in Charts with different Scales as some of the Scales in my Data are in a very large Range close to Trillions so its not possible to have these as the Primary-Y-Axis Scale and therefore I would need to use the in-built Display label option which Excel provides..
However, I always prefer to have the scale in the Range of Thousands so the Max I can have in the Scale can be 10,000 so if there is any Number more than that or the Scale is going above than I would prefer that this gets auto-calculated to Multiply with the remainder and show appropriate Scaling.
For Ex:In this example My largest Number is 4500000000 which is 100 M..So I would want the scale to show 4500 and the Display label as X Millions..
So The Display Label would be different for different Ranges but the Max Scale preffered would be 10,000.
I have a textbox with a label & he will type in his name in the textbox & it appears on the label. Is there any way to put the word "Hi" on the label & then have his name appear after "Hi" on the label. I can do it using 2 labels side by side but I would like to have it all on 1 label
View 3 Replies View RelatedI have read quite a few tutorials but none of them really reference what I am trying to achieve. Essentially I have one column with 2 options: "Compliance" and "Improvement". I am trying to make a dynamic chart based on the number of occurrences. From my understanding you need to use a "Named Range" and "Count" but I can not find any information on how you combine the two to make a chart.
View 3 Replies View RelatedI have two userforms with a label which displays CompetitorID. I want to transfer content (displayvalue) from UF1.label to UF2.Label. I know labels don't have a value property but want to simply know if it can be done as presently I'm getting run time error 380, can't set property value.
VB : HeadEntryForm.lbCompID = Me.lbCompID ' trf selected competitor ID to ID field on HeadEntryForm
I have a spreadsheet with a customers information and various parts we make for them. I need to be able to take this information and incorporate it into a label format. I need something quick and easy as there can be 150 parts per customer
Customer: ABCD
Customer PO: 12345
Part Number Quantity
AB 1
** 15
EF 22
GH 14
and I need it to output:
CUST: ABCD PART: AB
PO: 12345 QTY: 1
CUST: ABCD PART: **
PO: 12345 QTY: 15
CUST: ABCD PART: EF
PO: 12345 QTY: 22
CUST: ABCD PART: GH
PO: 12345 QTY: 14
I want to extract particular label from the text file named 'Branch : xxx" i what to extract the xxx from the text file and save it as worksheet name, is that possible through a macro? Then if required i will import the text file through the recorded macro.
View 1 Replies View RelatedIs there a way to change the text on a label in a form with macros. Im going to be updating some values (Years) and want these to change automatically.
View 2 Replies View RelatedI have a label in a userform which is picking up data from sheet1.range("a1") and i would like it to show along the left side of the userform so rotated at 90 degrees.
I do not have to use a label but I do need the data to be shown at 90 degrees.
I have an excel application that I'm developing that is going to be used by two different departments. On one side everything will pretty much be userforms. The sheets they the data I need to pull in for them is on sheets that I have such that their visibilty is equal too xlveryhidden. I'm trying to change the captions on labels using the data on the veryhidden sheets. Something like this.
'frmCurrentProposal is a userform
'lbGroupName and lbGroupNum are both labels that should vary
frmCurrentProposal.Show
frmCurrentProposal.lbGroupName.Caption = Sheet2. Range("B2").Value
frmCurrentProposal.lbGroupNum.Caption = "Group # " & Sheet2.Range("B3").Value
The labels are not changing their values.
I used a label from the forms toolbar and can't seem to change the color of the text.
View 5 Replies View RelatedIs it possible to vertically center the text in a userform label? For example: I have a label that's 22px high, but the text is only 10pt -- at the moment it just hangs out at the top of label looking bad.... I'd like to place it the middle if possible.
View 2 Replies View RelatedI have a userform in Excel and I would like to have a label calculate from the sum of 3 different labels. I have tried a few ways of which none worked.
This is what I currently have. This returns $0.00 in the label value but does not calculate...
Code:
Public Sub TotalCACost()
If TextBox12.Value > "" Then
Label685.Caption = ""
[Code]....
The reason that I have it as a public sub is that I am calling it to Private Sub extBox12_Change() as well as a couple of other textboxes so that when ever TextBox12 or the other textBoxes gets changed, the value will recalculate. The "other textBoxes" change the values of label443, 444, 445, 385, 386, 387 etc..
I have a label control whose caption is set from text from a work sheet
How can I set the text of the caption to bold
I have the following code which puts a series onto a chart
With Charts("Test Chart")
.SetSourceData Source:=Sheets("Data").Range("A1:B" & Nreadings), PlotBy:=xlColumns
.Axes(xlCategory).MinimumScale = 1
.Axes(xlCategory).MaximumScale = Nteeth
.Axes(xlValue).MinimumScale = Miny
.Axes(xlValue).MaximumScale = Maxy
End With
I would like to add a 2nd or third series onto the same chart using the same scale etc. How do I do this in VBA code? Whenever I add another line to add a series it just overwrites the first series I have shown here.
I'm trying to do something that I thought would be very simple for excel to do. All I want to do is show the average score of the data selected by the selectors in the chart. For instance, in the attached file, I have the following selection (AMER, North America, Canada & USA, Purple) and from this data selection I have 4 columns of data. I would like the chart to show somewhere on the chart the average of the total revenue (both columns) and the average of the GOP. Is there not a way of showing on the chart any data metrics?
View 3 Replies View RelatedI want to use 4 toggle buttons to be able to add and remove 4 different series to a chart. When the toggle button is clicked, a specific series is added to a chart, and when it is unclicked then the series would be removed.
The problem I am running into is that unless I add and remove each series in a specific order, I will get an error because I may be trying to remove a series whose series number is not on the series collection in the chart.
for example: if I remove series number 2 with the toggle button for that specific series, then the toggle button for series number 3 will remove the old series 4 (which is now 3), and the toggle button for series 4 won't work because series 4 will now have become series 3.
Therefore, would there be a way to remove a series based on the name of the series, rather than the series collection number?
c5 shows today() and I'd like c5.value to be the headline of a chart. Hence, in sample file the headline be changed to 05/03/2014 (and tomorrow to 06/03/2014..).
View 2 Replies View Related