I'm using the code below to create a pie chart and the code works fine.
[Code] .....
However, I now would like to change this so that I can add the word "FTE" at end of this part of code which creates the 'Value' data label.
[Code] ....
I have a simple line chart but I want to add an text description to each of the points. The data is driven by a pivot table so the text needed may change based on the drop down options.
If I was using the below data I would want the line graph drawn using the date and value, but the data label at each point to state the description.
Date Value Description
01/01/2010 90% Text A
01/02/2010 80% Text B
I have a textbox with a label & he will type in his name in the textbox & it appears on the label. Is there any way to put the word "Hi" on the label & then have his name appear after "Hi" on the label. I can do it using 2 labels side by side but I would like to have it all on 1 label
View 3 Replies View RelatedI have two userforms with a label which displays CompetitorID. I want to transfer content (displayvalue) from UF1.label to UF2.Label. I know labels don't have a value property but want to simply know if it can be done as presently I'm getting run time error 380, can't set property value.
VB : HeadEntryForm.lbCompID = Me.lbCompID ' trf selected competitor ID to ID field on HeadEntryForm
I have a spreadsheet with a customers information and various parts we make for them. I need to be able to take this information and incorporate it into a label format. I need something quick and easy as there can be 150 parts per customer
Customer: ABCD
Customer PO: 12345
Part Number Quantity
AB 1
** 15
EF 22
GH 14
and I need it to output:
CUST: ABCD PART: AB
PO: 12345 QTY: 1
CUST: ABCD PART: **
PO: 12345 QTY: 15
CUST: ABCD PART: EF
PO: 12345 QTY: 22
CUST: ABCD PART: GH
PO: 12345 QTY: 14
I want to extract particular label from the text file named 'Branch : xxx" i what to extract the xxx from the text file and save it as worksheet name, is that possible through a macro? Then if required i will import the text file through the recorded macro.
View 1 Replies View RelatedIs there a way to change the text on a label in a form with macros. Im going to be updating some values (Years) and want these to change automatically.
View 2 Replies View RelatedI have a label in a userform which is picking up data from sheet1.range("a1") and i would like it to show along the left side of the userform so rotated at 90 degrees.
I do not have to use a label but I do need the data to be shown at 90 degrees.
I have an excel application that I'm developing that is going to be used by two different departments. On one side everything will pretty much be userforms. The sheets they the data I need to pull in for them is on sheets that I have such that their visibilty is equal too xlveryhidden. I'm trying to change the captions on labels using the data on the veryhidden sheets. Something like this.
'frmCurrentProposal is a userform
'lbGroupName and lbGroupNum are both labels that should vary
frmCurrentProposal.Show
frmCurrentProposal.lbGroupName.Caption = Sheet2. Range("B2").Value
frmCurrentProposal.lbGroupNum.Caption = "Group # " & Sheet2.Range("B3").Value
The labels are not changing their values.
I used a label from the forms toolbar and can't seem to change the color of the text.
View 5 Replies View RelatedIs it possible to vertically center the text in a userform label? For example: I have a label that's 22px high, but the text is only 10pt -- at the moment it just hangs out at the top of label looking bad.... I'd like to place it the middle if possible.
View 2 Replies View RelatedHow do I name my data series in a chart so that the name consist of both a cellreference and my own text?
Example: "Name" & Sheet1!A1. If the value in A1 is 2 then the series name shold be Name2
I have a userform in Excel and I would like to have a label calculate from the sum of 3 different labels. I have tried a few ways of which none worked.
This is what I currently have. This returns $0.00 in the label value but does not calculate...
Code:
Public Sub TotalCACost()
If TextBox12.Value > "" Then
Label685.Caption = ""
[Code]....
The reason that I have it as a public sub is that I am calling it to Private Sub extBox12_Change() as well as a couple of other textboxes so that when ever TextBox12 or the other textBoxes gets changed, the value will recalculate. The "other textBoxes" change the values of label443, 444, 445, 385, 386, 387 etc..
I have a label control whose caption is set from text from a work sheet
How can I set the text of the caption to bold
I created a userform where if a value from cell x is true then the label caption changes to value in cell z. While everything works fine, the label caption does not seem to appear in my userform until i click on the label. Is there anyway that it can appear automatically once the userform opens?
Also example of my code is:
Private Sub EventDateResult_Click ()
If Range("A5") = "1" Then
Me.EventDateResult.Caption = Range("N4")
End If
End Sub
I have a plot that shows the position of a drifting buoy in the ocean. I have created a second series that is just the most recent position of that buoy. Everyday, using VBA, I update the chart 2nd series to point to the location of the new lat and long. For this second series, which is only one point, I have data labels turned on. I replace the data label text with the date and time of that latest position. Here is my problem. I can not find a way to format the date. No matter what I try, it has the format mm/dd/yyyy hh:mm AM/PM. I really just want it to be a 24 hour clock (mm/dd/yy hhmm).
I have tried forcing the format of the variable date_of_latest_pos, I have tried changing the cell format that contains the actual date and time...
ActiveChart.SeriesCollection("Latest Position").ApplyDataLabels AutoText:=True, LegendKey:= False, ShowSeriesName:=True, ShowCategoryName:=False, ShowValue:=False, ShowPercentage:=False, ShowBubbleSize:=False
ActiveChart.SeriesCollection("Latest Position").Points(1).DataLabel.Select
Selection.Characters.Text = date_of_latest_pos
Selection.AutoScaleFont = False
With Selection.Characters(Start:=1, Length:=23).Font
.Name = "Arial"
.FontStyle = "Regular"
.Size = 8
.Strikethrough = False
.Superscript = False
.Subscript = False
.OutlineFont = False
.Shadow = False
.Underline = xlUnderlineStyleNone
.ColorIndex = xlAutomatic
End With
I have a spreadsheet with rows of data. Presently, there are three pairs of columns. The first column in each pair has a label (E, F, R). The second column represents the number assigned to the label (e.g. 30, 40, 60, 70). The labels may appear in the first column of any of the three pairs. I would like to reorganize the data in three columns, which are headed, E, F, R, with the associated number underneath the heading. I have attached a sample spreadsheet showing the desired results.
View 2 Replies View RelatedI am experiencing a 1004 run-time error on the following code....
View 3 Replies View Relatedtrying to update pie charts via vba. This is working fine, but I have a problem with the data labels. The number of categories can change each time the macro / data is run. This is as it will be for different customers that takle different products.
When the data labels are remapped, those with a small percentage end up placed untop of one another. I have already played with grouping these small percentage together into an 'Other' Category which works fine, but I know I will be asked to split this out.
Is it possible to add a condition that states 'DATA LABELS MUST NOT OVERLAP' - or is there some way of working around this to the same effect...
anyone know how to display data using label on userform? I tried using offset but it doesnt work. The data I want to display is in column G. How do i go about that?
View 13 Replies View Relatedmove my data labels to next data point on my charts, for only those series which are already labelled.
I have a spreadsheet that has about 40 pivot tables that use label filters for filtering HH:MM and "greater than" selection. When I do a refresh, I have to go back and reset the label filters. Is there any way to not have to re-do every label filter after refresh? I have looked at all the settings and didn't see anything in there that looked like it would work. Maybe VBA?
View 4 Replies View RelatedI have one series on my chart set as column type with data value labels. I have another series as line type to create a benchmark line across the chart. The chart is interactive where user can select 1 of 20 units.
On some of the units, the labels are overlapping the line type chart and causing a poor display
I'm working for a local authority who have been given a mass of survey data. In this particular task, residents of each small district within our area have been asked their levels of satisfaction with a service, and how important they think that service is. I want to plot these two values against each other using a scatterplot, and label each service.
Excel does not automatically allow this so I used a very good sheet from the forums here: Attach labels with names to the points in a scatter plot. It's the top file, and works well. However, I can't seem to customise it for my own data.
Problems include:
- Excel often freezing when I try to run it
- Not all the data being picked up for the chart
- Incorrect labels being picked up..........
I am new in Excel. Recently I have to copy a cell data from Pivot table (example value in B1 cell) to new sheet by this week. My problem is this value could move to C1 by next week & so on. I try to use the column label instead of hard coding like cell column name (B1).
View 1 Replies View RelatedI have a bunch of raw sales data, by individual, which I would like to quartile to determine who is performing at which level.
Not all of this data should factor into the Quartile - a T/F "Exclude?" column flags the individuals who should not count in the quartile for any given month.
I then built a pivot like this with the Row Labels nest like such:
Exclude
Year
Month
Agent
What I would like to do is define a formula that will quartile all of the agents where Exlude is False, Year is 2011, and the Month is January. And I would like this work going forward, so manually defining the range each month would not be a fix.
What do you all think? Is there a way to do this? To tell it to only quartile the individuals for each month?
FALSE
..2011
.....January
.........Roseus.........5
.........Mr. Excel......6
........................3
.....February
I have plotted a chart through VBA and I am appending some information to certain data labels. This appended part is being turned a different color depending on if a corresponding value is less than or greater than 0.
Code:
For i = 1 To cht.SeriesCollection(1).DataLabels.Count
If ws.Range("C" & i + 1).Value < 0 Then[code]....
In stepping through the code, I notice that it works until the color switches twice. So for instance, if the first 3 points are below 0, it turns the appended part of the data label red. Then the next point is above 0 and it turns it green. Then the next point is below 0, and at this point it turns the appended part of EVERY data label red (overwriting the previous green one). It keeps going like this until all of the data labels are either red or green, depending on whatever the last value is as it just keeps overwriting.
I make a bar chart from series of data from cells.
The data consist of values that regarding of students achievment in a test. On the cell if the value is 56.67 and on the data label is shown 56.67.
When the cell value is 50.00, which then I've change the format of the cell to custom format to 0.00;; so it only show 50 but on the data label of the chart it will show 50.
Even after I change the format of the data label it will still show '.' At the of the value.
How to hide the '.' On the data label if the decimals value is .00?
I'm using MS Excel 2010
I would like to display the latest data label value for a data series So if I update my table for period 2 the chart should update to display only this value. Then period 3 and so on Workbook attached
View 3 Replies View RelatedI am applying for a job as an executive assistant and before the interview I have to complete a "test." I am having trouble with one direction. Here is the question:
"10.Apply series name and legend key in data labels to the Star data series. "
I have included what I think is the correct answer, but I am not sure. It is under the column chart sheet.