grouping the protected/locked data.I am using excel 2010.I have data in sheet and have inserted group. I have protected this sheet and hence not able to use data group in this sheet.Is there a way i can operate data group option even if the sheet is protected.
View 1 RepliesI have some cost data for 5 different technologies that I would like to plot in a graph. the technologies belong to 3 unique categories and I want to group them on the chart so that there is no gap between technologies in a same category.
I have a graph where they are grouped by title of the category but how I may remove the gaps between the individual bars in the same category?
I have a given set of data. Each row of data fits into one of 7 different categories. Besides doing a simple filter to be able to pull out a certain "category", how can I do this differently? Is there a code/macro process I need to go through? Basically what I need to do is find a way to group these categories together, so that someone searching for a certain category can easily pull it from the data.
View 8 Replies View RelatedI recieve an error :
Run-time error '50289':
Can't perform operation since the project is protected.
When i try and run my code.
The code does add parts to modules and workbook events, but I need the code to be protected.
I've about 30,000 recordes in Column A of numbers between 1 and 100. In Column B I'm looking for a formula to return "Less than 10", "10-20" etc up to "90-100".
I think I need to use excel vba If...Then...Else
from the Forum on building a macro and was kindly told that a Pivot Table would do the job better, which it does. However, my table has a column of several dates, I was wondering the best way to group the dates into months rather than showing the full date, eg, September instead of 16/09/08 or August instead of 01/08/08.
View 4 Replies View RelatedI'm looking for a quick way of counting the proportion of records in certain number ranges e.g.
Number of records in range 1 to 50, 51-100, 101-500 etc.
i have a pivot table but I'm just not sure how to create these groupings. Is a pivot the right way to do it - or should I be doing something else with the source data.
I'm trying to sort a selection of data into groups (2 cols, 1st is P-No, 2nd is Qty) based on the first four digits of the P-No and then tally the groups Qty (so I have the total Qty for any given product group) but short of sorting the data by P-No then manually separating it into groups where the first four digits are the same and then applying a SUM calc to the separated groups Qty column I can't think of a function/sum that would speed this process up!
Any way to speed this process up/automate it?
The Data Worksheet in the file attached lists information on various software packages a company sells. Each product has an associated category listed in column B. Write a sub that creates a worksheet for each category represented in the list, with the name of the worksheet being the category, such as Business. For each category worksheet, it should enter the product names and their prices in columns A and B, starting in row 4. Each category worksheet should have an appropriate label, such as “Products in the Business category”, in cell A1; it should have labels “Product” and “Price” in cells A3 and B3; and the column width for its column A should be the same as the column width of Column A in the Data worksheet. ( Note that there are only three categories represented in the current data. However, the program should be written so that it Works for any number of categories – and any number of products- that might be present.)
I have the following code, it works properly when I run it for the first time but fails to re-run for the other coming runs.
This is what the data sheet looks like: [URL] .......
Code:
Sub Business()
Dim Data() As String
Dim blnCheck As Boolean
Dim intProdCnt As Integer
Dim i As Integer
Dim wksC As Excel.Worksheet
[Code] ......
I have a set of data that looks like this:
A | B | C | D
---------------
100 | 2 | 0 | 0
100 | 0 | 0 | 7
100 | 6 | 0 | 0
101 | 8 | 0 | 0
101 | 0 | 5 | 0
101 | 0 | 0 | 1
Column A is a 'User Number' and columns B-D contain values.
I was hoping to use this data to create a new range where each 'User Number' only has one row, and the values in the other columns are summed for each user.
This would ideally look like this:
A | B | C | D
---------------
100 | 8 | 0 | 7
101 | 8 | 5 | 1
I have around 30k data. which is in invalid format.
Ex: 12987654321vinay kk 876543219
32567456789 kkccjhg fo 345678921
I want to convert this into correct format as below with start letter from MOD, 987654321,, vinay, kk,87654219
MOD,567456789, , kkccjhg, fo,345678921
I want to know which are formulas I have to use to get this info in correct format.
I have a data file saved as csv like this:
Risk Postcode,Effective Year Month,Written Premium,Written Units,Earned Premium,Earned Units,Claim Cost,Claim Count,Glass Manufacture Decade,
2600,200507,0,0,5.7354,0.0765,0,0,1920,
2600,200508,0,0,5.7354,0.0765,0,0,1920,
2600,200509,0,0,7.1693,0.09563,0,0,1920,
2700,200510,0,0,5.7354,0.0765,0,0,1920,
2700,200507,0,0,5.7756,0.0885,0,0,1930
what i want to do is to group the record with the same postcode together and just return one record for each postcode in excel.
so the output will have the postcode, the sum of written premium, written units.
I understand i can use Access to do it, but I want just to use excel for this task.
Having the cell protected after entering the data. From the below table, i need when a date is entered and moved to next cell, the cell which contains the data should be protected. I need to this for the comments column as well.
Number
DateStart timeEnd TimeActual Time takenComments
123459132546132156135469654814846543
I am trying to import data from a website protected by ID and password. I do have the login ID and Password to login to the website.
I am importing data from the website to my excel sheet to track some shipping informations. I do have the 'Import to Excel' option but I would rather open the
spreadsheet and click Refresh Data and have all the Data imported with click of a button.
I have already tried to use Import External Data but it is not working.
I making a data entry form that sereval employees will be using. But what I need is data quality protection. My idea is to have a userform with a combo box. The employees would select there name from the combo box and then enter there personal password to get access to the data entry information, which will appear if the password is correct but kept hidden if password is incorrect. I have a example.xls without any code contain in it.
View 2 Replies View RelatedI need a VBA macro code to get the output like in the excel file which I have attached with this thread. Which means, I need to group the data for every two hours. in the output I need all 4 cols namely A, B, C, D along with extra col namely, interval based on which I need these groupings to be done..
The code has to be really flexible so that it works for all dates and times in the files. Because like this I have to do for 2000 files.....
Original link: [URL] .....
plant area.xlsx
The attached file shows what I'm trying to do - I'd like to fill in the data in the top left corner table (blue-shaded) with the data combined from the two other tables. Think of the Greek letters as names that are grouped into the groups named {A,B,C,D,E} (the names have no significance, it's just an example).
I was able to do so using an array formula and an extra column (yellow shaded) as you can see in B2 - however, this solution doesn't suite my case because the actual tables will be coming from automated processes and cannot be easily manually altered.
I tried inserting the array formula into the sumproduct formula - see B3 - but for some reason this doesn't behave the same as when the array is outside the formula. I should also mention that I came across a user defined function solution - this too is not so suitable for me right now.
is it possible to restrict a cell in such a way that it is impossible to type data into it, but rather select data from a drop down, through validation?
View 9 Replies View Relatedhow to protect a worksheet from editing and at the same time allow all data source links within the sheet to be refreshed? I need my users to be able to refresh all data links as required but not be able to change the worksheet in any other way.
View 2 Replies View RelatedI have a pivot table and and struggling to group these by month as well as to sort thee in escending order.
Pivot Table ABC3Row LabelsSum of DebitSum of Credit
413/02/201334367.1822844.19513/03/201326475.492219.66613/08/201230307.613541.2713/09/2012
18898.0318065.4813/10/2012 7210.52913/11/201241969.041767.821013/12/201232844.7724041.26
I need grouping and then summing in either msquery or back in excel after the data has been extracted from msquery.
I have external data that i have interogated in msquery, and I would like to to sum the amount column if possible.
I have two fields, first field = account number
2nd field = amount due
the first field could contain 5 sets of the same account number, but with different amounts in the Amount Due column. I would like to sum the amounts due for each of the account numbers in one column.
If i cannot do this in msquery, how do i then go about doing it back in excel. I know i can use subtotals, but then when the data updates from the external data source.
Sheet1 presents my "achievement".
Sheet2 shows what I'm after.
Can this be done WITHOUT any help columns/tables - just by using worksheet formulas?
How do I sum only the total in various groups? I can highlight the cells to get the total but when using the sum function I get the hidden rows too.
View 5 Replies View RelatedIs there a way to group tabs? For instance, I have 3 tabs that go with one section and 3 with another and so forth. Is there a way to group them? Also, can you change their color?
View 3 Replies View RelatedI have a table in excel that contains many rows, each row being a product. Each row has a product ID, and should be unique, but there are multiple instances of products in the table, some that are duplicate and some that contain different info (product notes, description, etc).
What I would like to do is group the products by product ID, so that I can show the different occurances of the product within each product ID, so that we can weed out the unique values within the duplicate products by ID. Is there any easy way to do that?
excelexample.jpg
I would like to create a graph where the numbers are grouped in such a way as all numbers between 0 and -1 are shown in one column, all numbers between -1.1 and -2 are shown in the next column, all numbers between -2.1 and 3 are shown in another column etc
The numbers are shown below
11/03/09
-2.5
-3.8
-3.9
-4
-4.1
-4.5
-4.6
-4.9
-5.2
-5.4
-5.4
-5.5.......
See attached spreadsheet. I would like to take all the departments (column a) and all the dates (column b) and group them. Then add up the sums for columns (e and f) respectively. See desired result in spreadsheet for entire range. How do I do that?
This is in excel 2003. So cant use sumifs.
Create an =IF() statement that divides the infants into four - lb. age groups (beginning at 10 lbs.) and assign a 1 to the lowest group, a 2 to the second, and so on.
10-14
14.1-18
18.1-22
for the three groups
I have grouping setup in my excel spread sheet.
1. I added pictures(print screen-->mspaint-->cut existing part of the image-->paste into excel. In excel they are called "Pictures 01 thru Picture X" with the pull points all around.
2. I located them in specific cells of the grouped type with the (-) sign appears so the group of cells are in use
3. When I close the Group(+) of cells all the pictures are jumbled above the closed cells.
Question: Is there away to keep these pictures within those cells when closing the group, so they will not been see as well?
I have a workbook that calculates the total sales per agent but looking a datasheet. At the bottom of the sheet I have 4 team managers who look after a group of agents. I need their totals to me calculated by summing each of the agents in the teams.
I have tried to create groups per team_manager using my team_ref_sheet. On this sheet I have Defined Names / Named Ranges which I thought would work for doing these calculations, but this does not seem to have worked.