I have data as follows in Column A:
Part Number: 0000000-1 ARTEC-GH-56S 12A
SPARES in Repair: 20
On-hand: 100Location: BNCD
I need the data under different columns as follows: I also want an extra column before Column A labelled as Common number.
A B C D
Part Number SPARES ON HAND LOC
0000000 20 100 BNCD
I have a userform with two listboxes in them, i have set the columns in the listbox to 9 and would like to populate the column headers in the listboxes with the column header of one of the sheets.
View 5 Replies View RelatedI am in need of restructuring a spreadsheet of addresses for mailing purposes. (I tried to find something similar answered previously, but nothing seemed to work for me.)
I have attached a small example spreadsheet below, but our spreadsheets can be hundreds or thousands of rows in length.
I need a macro that will look for the "PO Box" addresses under the column headers named "ADDRESS2" and "ADDRESS3".
The PO Box addresses will need to be moved under the column header "ADDRESS1" within the same row.
It will need to overwrite the text that is already under "ADDRESS1" and delete the text from the "ADDRESS2" and "ADDRESS3" columns - UNLESS the text in 'ADDRESS2" is a PO Box AND "ADDRESS1" begins with "c/o".
If the data in "ADDRESS2" or "ADDRESS3" is anything other than a PO Box it will remain the same. As will "ADDRESS 1".
Basically if there is a PO Box it needs to be in the column named "ADDRESS1" and overwrite anything else that was there. The exception will be for PO Boxes that are in c/o someone else, the PO Box will then need to be listed in the column directly after the column that has c/o.
If the c/o exception will be too difficult the code could just highlight those scenarios and we could fix them manually. We usually do not have a lot of them, but enough that we need to be mindful of them.
The different scenarios are listed in my sample spreadsheet.Also, the code will have to use the column header names in row 1 because those headers are not always in the same column.
I have two columns with dates. Colum A has the date of the deadline of a document while column b has the day it was sent. Column X will display the difference if its a positive integer ( i.e. if the document has been sent after the deadline). Now i have another column Y which displays the month as an integer of when the document was actually received.
Now i need a counter which will count the number of instances a positive integer is registered in column X according to the month in column Y. I have been trying everything but cant figure a simple way to do it. Im doing this so i can be able to see how many documents are sent after the deadline per month.
I currently have a worksheet filled with data from other worksheets. I want to combine data from different columns when they share an identical row header and don't know how. For example:
1b--
1--c
1-d-
2-x-
2y--
2--z
Would go to:
1bdc
2yxz
Another specific issue is that some row headers are bold and need to be considered a separate header from the non-bold alternative.
See attached spreadsheet. I need to have all the data which is held in 1 row in column A seperated into its own column automatically. The order i need the data to be in is as follows
Date(pink), Time(red), Racecourse(green), Race Type(black), Class Of Race(purple), Going(blue), Prize Money(yellow), Distance(grey), Number Of Runners(brown). the text in bracket is a key for the info for your ease of use.
How can I delete an entire row based on seperate column data? Example: I want Excel to look at cell A2 and cell E2. If the values are the same I want Excel to delete row 2.
View 4 Replies View RelatedIn the attached file, details sheet contains multiple instances of project with associated costs for each of 2006, 2007 and 2008. What I need is a formula (preferably) or a VBA that select distinct project names and populate column B of summary sheet so I can do a sum if. The problem is the project names changes dynamically every week and they are practically in hundreds.
View 9 Replies View RelatedI need to copy all the work sheets into one single work sheet (mastersheet). The source work sheets are having same column structure. The condition which i need to take care of is that after column 3 if at all there is any data till column 10 then in the destination mastersheet these should be copied in different rows with first two columns repeated. I need to do this using VBA macro.
View 9 Replies View RelatedI have been given a spreadsheet with standard configuration with column headers etc, but when you scroll down the sheet the actual column headers change from the normal A-Z display to be the column headers that have been entered into the cells.
I know this can be achieved similarly by setting Freeze Pane but how this other option has been switched on. I have attached the spreadsheet (which has totally fictitious content).
I have individual date columns with calculated field in the next column, and this goes on for the rest of the worksheet. Example,
Column Header H to N consists of dates ranging from 2/24/2014 to 3/2/2014.
Column O will be the new column.
I want to change the new column header with the combined dates in the first column and the last column , i.e. the column before the new one, with a "To" text in between these two values. That way it becomes easy to identify the new column headers which are supposed to be week-wise.
So, for this example, it will be Column O = "2/24/2014 To 3/2/2014"
i.e. Column O = "Column H1" To "Column N1"
I have a large table that I want to reconstruct. For simplicity sake, let's just says it's 3 rows (excluding headers) by 3 columns.
Item Description
1/1/2014
1/2/2014
1/3/2014
Cheese Burgers
2
3
4
Hot Dogs
5
12
6
Beverages
2
5
3
I want to reconstruct it so that the column headers become values in the table. The table headers are dates, in this case, if that gives clearer picture. So the new table would have 9 rows, (3 rows of data, excluding the header times four columns).
Item Description
Date
Quantity
Cheese Burgers
1/1/2014
2
Hot Dogs
1/1/2014
5
[Code] ....
The above example is sorted by date but I would be indifferent if it's sorted by the Item Description.
Is there an easy way to do this? Pivot possibly? Again, my data table is large: 36 rows x 181 columns. Using the copy/paste/transpose feature is pretty impractical.
on a vb user form list, made from the control toolbox
I enable collumn headers but have trouble populating them
From what i could get from google, it seems the only way to populate them is by having the data on an excel sheet. Can you just do it through code?
I have another list which the data is on an excel sheet but I can't get my headers working.
I have been using
frmAct.listCodes.RowSource = ("A1:C39")
frmAct.listCodes.RowSourceType = ("Value")
It doesnt like "Value"
In the attached file is it possible to use cell/ array formula in cells P3 to R6 to lookup names (Column O) within the data range (Columns A - M) and return the values shown in the yellow shaded area?
View 8 Replies View RelatedIs there a simple formula that can be used to seperate text in a column.
Example:
ABC - 123456
I want to return the text before the "-".
I have columns with titles at the top, and with numbers in the below cells.
What I would like is a formula for a column seperate to these that firstly, looks if there is a quantity in the relevant cell on that row, secondly takes the title (top cell) of that column, and thirdly puts the number in the cell on that row after the title:
A_____B_____ C_____ D_____ E______ F
1_____UK____ Ger___ M/E___ Rus_____ Nor
2_____80_____250___ 300___ 350_____200
3____ 60_____200____350____350____ 150
So in cell A1, I would like a formula that reads the subsequent cells and their titles, and gives a one-cell summary of the data seperated by commas. So in A1 it would say:
UK 80, Ger 250, M/E 300, Rus 350, Now 200
And in A2:
UK 60, Ger 200, M/E 350, Rus 350, Now 150
My and a work college needed to combine our separate excel worksheets into a single document.
Office 2013 didn't have a function to "import sheet from file" so we used open office to import my .xlsx worksheets.
After we finished importing we exported the final workbook as .xls (so I could open it).
After opening the workbook on my pc (excel 2013) i notice some of the sheets no longer have column headers, but the row headings still exists. (No ABCD, only 1234)
Also I am unable to use features such as "Freeze Pane"
I suspect this was caused by importing and exporting through open office?
How do I set up the formula bar so it doesn't cover the column headers?
View 1 Replies View RelatedI want to return the column headings (the months) where there is a 'No' value, per person. How to do this?
Here's the screenshot
Screen Shot 2014-03-17 at 11.45.34 am.png
And here's a dummy version:
Example Spreadsheet.xlsx
I have a table with headings for each column.
How can I make the columns headers buttons/clickable, so that it sorts the rows on the column that was clicked upon?
I want to include columns in my Pivot Table where there is no data for that column. For example, I want to show 12 columns, one for each month, but my data only has 9 months of values.
View 3 Replies View RelatedMy spreadsheet has in the region of 30 columns, more will be added on occasion in the future and ultimately I want to have each of the column headers appear in a 2-tiered dependent combo box. In the following structure:
Category 1:
Header 1
Header 2
Header 3
Category 2:
Header 4
Header 5
Header 6
Header 7 etc...
What I'm not sure about is what the most efficent way of making it so that it will automatically add new Column headers (and possibly categories) to the drop-down box so that it does not need to be re-coded in the future.
I have a column with rows having strings as below (see sample.xlsx excel attached) .
I want to delimit the string in such a way that the for each parameter, the parameters will beome columns with headers and the value against them will be shown in thier respective column. The output tab in the attached excel might make what I am trying to convey more clear.
So basically CPU should have its own column and its time against it.
There are thousands of such column that we wish to analyse and therefore the ask.
I tried various option to delimit including recording a macro but did not work
CPU: 5,622.871 ms, Sync: 0 ms, Wait: 0 ms, Suspension: 2,399.921 ms
I'm having an issue where I have a macro (see attached file) that is supposed to auto-fill and sort. Twhen it tries to run the auto-fill on a sheet in its blank/template state. It will take my formulas in columns AC:AZ and fill them up to the header row.
[Code]....
This code was hobbled together using record macro and my minor understanding of coding.
(CK) Macro issue.xlsm
I have a small sample table that replicates what I am trying to do
A
B
C
D
E
1
Bob
Jim
Mary
Sue
[Code] ........
I would like to have excel put in compile the list of members on Teams 1 through 4. So in A7 through A10, I will put the teams and then in the B column I want the compiled list seperated by commas for each team so that they read like this...
Team 1: Bob, Jim, Mary, Sue
Team 2: Bob, Jim, Sue
Team 3: Bob, Mary
Team 4: Bob, Sue.
Of course this should be dynamic so that if I place an x in C4, then Team 3 would read as Team 3: Bob, Jim, Mary.
I have tried various index match offset combinations and did not have any success.
Is there any way in Excel to create single-cell named ranges from a combination of the labels in the rows and column of a spreadsheet.
Here is an example:
CompanyA
CompanyB
CompanyC
CompanyD
Sales
100
200
[code]....
I would like the first cell (containing the 100) to have a defined name of (something like) "SalesCompanyA", and the second cell to be "SalesCompanyB". And so on - e.g. the cell with 300 in it should be "CostCompanyA".
I can do it manually, but I have a huge spreadsheet & was hoping it could be automated. Just to be clear, it needs to be a single cell range. I know you can create a range from a selection - but this seems to create ranges of the entire row and/or column.
Ceating a macro to perform a look up and return based on column headers.
General Synopsis: Using a call and parameters to choose a lookup column and return column, and their respective sheets. Then the sub routine finding their respective column headers and perform a lookup/return. Essentially the current problem is the macro runs to slowly.
Link to original post: Lookup Macro based on column headers
I have a spreadsheet with two sheets, 'Sheet0' & 'Sheet1'. In 'Sheet0' I have a column named 'A_Sheet0' containing a list of numbers from Rows 2 - 50. In 'Sheet1' I have 3 columns, the first containing numbers 1 to 50, the second, 'B_Sheet1' containing a list of ascending numbers and the third is the column of interest. This column entitled 'Nearest Value' must read the corresponding value of Column 'B_Sheet1' then find the closest number to that from the numbers in 'Sheet0', column 'S_Sheet0'.
I have included a sample file with this thread, and in the 'Nearest Value' column I have manually input some of the nearest values for your information.
I am looking for a way to ease a 24,000 line duplicate list into showing just the files from a specific folder/subfolder and its dupes. I have marked the files that reside in that folder by adding a column and entering a "1" in it. What I am looking for is a way to add that "1" to the others of that unique numerical ID duplicates, so I can sort and trim the list to just those files. End result is to show files in one folder and the locations of duplicates of those files elsewhere for eventual cleanup.
Very loosely, if C2=C1 and B1=1, then make B2=1 (and so on)
(A is blank and only there in case a formula needs input there)
A B C
110121
10121
118134
18134
18134
124232
24232
I've done some searching and cannot find the right answer for my question. I need to create a formula that will pull column header text data based on cells within a table that contain a numeric value not equal to zero. The catch is that I cannot use any one specific numeric value as the basis for a Lookup.
I've attached an example spreadsheet for reference. Basically, I need two formulas:
1. Formula to pull column header (Receiver name) based on Sender. This is a necessity.
2. Formula to pull individual lines for those senders that have multiple receivers (Division D in my example).
My actual data file has 80+ senders and 100+ receivers.