I need to copy all the work sheets into one single work sheet (mastersheet). The source work sheets are having same column structure. The condition which i need to take care of is that after column 3 if at all there is any data till column 10 then in the destination mastersheet these should be copied in different rows with first two columns repeated. I need to do this using VBA macro.
View 9 RepliesHow can I delete an entire row based on seperate column data? Example: I want Excel to look at cell A2 and cell E2. If the values are the same I want Excel to delete row 2.
View 4 Replies View RelatedMy goal is to macro the creation of pivot tables into seperate worksheets based on each particular record in the "Office" (location). Ultimately, I will apply an email macro to send out each pivot table (and source data if necessary) to various recipients. I need to make sure that each recipient of a pivot table is limited to only drill into the detail for their particular "Office" and not able to view other location's information in the Source Data worksheet--is this possible, or do I need to create separate source data worksheets for each Office's pivot table in order to limit the viewing?
Items I need guidance on:
Creating a macro to breakout pivot tables into seperate worksheets based on "Office" locationPlease advise on how I can secure Pivot Tables so that the user can only drill into the information originally presented in the pivot table they receive and will not be allowed to view all of the source data.
Please find attached a file with my source data and an example of a pivot table for one of the Office locations (Chicago).
I have a workbook with many sheets of similar but not identical data. I need to extract columns from each sheet based on 5 header criteria and paste them to a single sheet. Each worksheet contains these 5 criteria.
I've been working with the VBA script I've pasted below. It's grabbing the 5 column criteria that I have in sheet 12, and comparing them to sheet 1 in the workbook, then copying them to sheet 12. This much is good, but I need the script to also return the data from the other worksheets as well. I've tried modifying the script based on other loop functions in other scripts I've found, but I'm not having any luck.
i need to count based on 2 seperate sets of criteria in the same row.
column G houses the total number of hits as a number,
Column E holds the division
Column B holds the job title,
rows 2 through 222
i need to sum up the numbers in each G field, where the G and E field match a specific text criteria.
I have attached the xls. I have an input sheet with 3 columns to enter data. Each column is linked to a separate worksheet with a formula (Carrys 1000 rows long). I need to be able to pull the populated data from those 3 worksheets and paste into 1 column continuously on another worksheet so all data is on top of another without any spaces.
I made an if statement so that if there isn't data pulling from the input sheet the a blank cell is left to indicate the last row to copy data from and paste on the final sheet.
I have to look through an entire table and find certain criteria (eg. "STEVE'S PIZZA SHOP"). It might be in columns G or H, or it could also be in Columns C or something of that nature. What I'd like to do is search through the table, find each instance of said criteria and cut each row the criteria apperas in to a different sheet. I'd like to do this as a macro, so I can set it up for other criteria as well. In addition, if I can include in the macro a way to create a header row (which I'm pretty confident I can myself), as well as change the title of the sheet the information is moved to. I have looked up Do-While loops, For-Next loops, If-Then loops. I am at a total loss.
View 9 Replies View RelatedThis is driving me nuts. What I have is:
Sheet1:
ColumnB - number stored as text (Work ID)
Remaining Columns: - mixed data, some columsn numbers, some text
Sheet 2
ColumnA - number stored as text (Work ID)
ColumnB:ColumnAW - mixed data, some columsn numbers, some text
CollumnAX - Dollar Values
What I want is in Column F (Sheet1) a formula to:
if workID in Sheet1!ColumnB is present in Sheet2!ColumnA AND Sheet2!ColumnAX>1 then return True
My table is as follows:.....
If the columns A, B, and C were constant and never changed and only column H changes from job to job, how do I: SUM the TOTAL number of pieces (pcs per X qty) if the value in column B is "A"? I need to do this without creating a seperate mutliplication column for the sum of the pieces. It all needs to be done without adding any new columns.
I'm trying to make a pivot table that can compare sales based on the whatever month/year/salesman combination I give.
Ideally, I'll be comparing the sales data for 3 seperate months. Can I make a pivot table where I can make different filters apply to specific columns?
I'm trying to use countifs on a filtered table to find the sum for a column based on 2 criteria.
I've used =SUMPRODUCT(SUBTOTAL(3,OFFSET(Sheet3!K7,ROW(Sheet3!K7:Sheet3!K7:K20000)-ROW(Sheet3!K7),0)),--(Sheet3!K7:Sheet3!K20000="Yes"))
for a single criteria which is great, but I also need it to look at column B.
In a non-filtered table it works as:
=COUNTIFS('Sheet3 '!$K:$K,"Yes",'Sheet3 '!$B:$B,B5)
Is there any way to do this?
I have an personnel file with employee info, and I want to create a macro that will look in the "Master" worksheet at the Department column ("I") for anyone in Benefits, and then copy their name from the Name column ("D") into the "Benefits" worksheet. The names should begin pasting in cell "D3" but will recognize if a cell already has a name in it and then paste in the cell below that.
Here is what I have:
Option Explicit
Public Sub RatingbyDept()
Dim Dept As Range
With Sheets("Master")
For Each Dept In .Range("I2:I1000")
With Dept
I keep getting error 92 - "For loop not initialized".
I currently receive a download that contains multiple reports in one excel sheet. Each report is separated by the value "Vendor" in column A. I would like to separate each of the reports into a new excel sheet. Basically, I will need to copy all rows between "Vendor" and "Vendor" values and paste to a new sheet.
View 2 Replies View RelatedNow what I am looking to do is search my spreadsheet for specific criteria and then copy and paste these rows of information to a new sheet.
In my first spreadsheet that I am using as a database, I want to be able to select any entry from the month and copy it to another spreadsheet named for that criteria.
In other words, I want to find every entry for January, copy just that data's rows and paste them to the January spreadsheet, February to February, etc. My date fields are in column A.
I also want to do the same with representatives names found in column B.
This will break down the data for each rep and each month. Using the filter, then copy and pasting would be cumbersome.
I have a spreadsheet that is used to store statistical information on a monthly basis, some of this information may be incomplete and so will need to be acted upon month by month, What I need to do using VBA is: At the close of the spreadsheet check sheet1 and if there is any data (text) in cells N – Q on any line If there is move to sheet3 check for the next blank line then paste the data from only certain fields i.e. A,B, N-Q,R,S
Here is another problem
As the sheet will be used on and off during the month I don’t want data that is already been moved across to sheet3 to be copied again so there needs to be someway of checking if the info is already there? I have code now for the find last cell part of the problem.
Sub FindLastCell()
Dim LastCell As Range
With ActiveSheet
Set LastCell = .Cells(.Rows.Count, "A").End(xlUp)
If IsEmpty(LastCell) Then
'do nothing
Else
Set LastCell = LastCell.Offset(1, 0)
End If
End With
LastCell.Select
End Sub
I have on sheet1 of my workbook a number of rows of data, from column A through Column G. The Data in column G either contains the text "Yes", or "No".
I need a macro that will look through each row in this sheet, and upon finding a "Yes" in the cell in the column G, will copy that entire row (columns A through G) into a new row in sheet2. Sheet2 currently contains data, so I'd like to move everything down by one row and paste this data at the top (row 6 is the first line of data on this sheet).
I'd then like to go back to sheet 1, and delete the row I've just copied. Then continue though the loop. The loop needs to stop when a blank row is discovered.
I'm not sure that I'll be able to explain this clearly, so I've attached an example. There are 3 columns - Issue, Action Group and Status. Many Issues belong to the same Action Group and others do not belong to any Action Group. The is also a Status summary section that has the total Issues and Actions associated with each status. For example the Status called Resolved could have 10 issues and 5 Actions (including blanks). The problem is that I can't figure out a way to get the total for the Actions. As I said this explanantion isn't great, so the attached sheet
View 3 Replies View RelatedI've been trying to get a table to populate based on a couple of criteria. However, I've not come-up with the solution yet.
I have my dropdown selections in cells C2 & C3. The objective is to populate the table below the dropdown with data from the sheet named (very unimaginatively) 'Data'. Currently you see the selection AA-11 & Mar-14 in the Contract ID & Month cells. If I change this, the table below should auto-populate.
I've attempted using Vlookup, Index-Match. But it does not give me the desired result.
Also, the number of Products can change each month (although the file shows 4 for each month & each Account).
Attached file where i m not able to split data in seperate seperate coloumn
View 3 Replies View RelatedI am trying to find a way to copy the contents of an entire row to a new sheet in a workbook based on the value of a column, specifically column K with the value of "good". There are 3 sheets that im searching. This is where I run into problems. Im looking to start with sheet1, and copy all rows deemed "good" into entries on sheet 4. Then search sheet2 and copy all relevant entries into the next available row on sheet4, and then repeat on sheet3.
View 2 Replies View RelatedI have a file that has two sheets, I have some formulas in the first sheet named "Data",What i would like to have is, If column G in the sheet Data is "Closed", then i want that particular row to be cut from the sheet " Data" and pated in to the Sheet "Done".
View 5 Replies View RelatedI have two columns with dates. Colum A has the date of the deadline of a document while column b has the day it was sent. Column X will display the difference if its a positive integer ( i.e. if the document has been sent after the deadline). Now i have another column Y which displays the month as an integer of when the document was actually received.
Now i need a counter which will count the number of instances a positive integer is registered in column X according to the month in column Y. I have been trying everything but cant figure a simple way to do it. Im doing this so i can be able to see how many documents are sent after the deadline per month.
I have a problem whereby I have a list of data that has a date, a transaction and a balance. I want to be able to rearrange this data into multiple tables, one for each month.
The pictures below explain the situation better, on the left is the list of data I need to sort, and on the right is how I'd like the data displayed. So for the May columns I would like to display all transactions that happened in May and, depending on whether it is an income or an expense, the amount in the corresponding column.
i.e. so the finish result looks something like this:
I want to write a VBA code, so I can apply dates criterias to my pivot table. Say, I have 1-Dec-2007 in "C2" and 10-Dec-2007 in "C3". Now I want my pivot table to show me the dates between those two dates and the data that goes along with it. I have written this code, but it keep debugging:
Sub FilterDates()
Application. ScreenUpdating = False
Sheets("PnL").Select
Sheets("PnL").PivotTables("PivotTable3").PivotFields("Date") _
.PivotItems("01/01/1950").Visible = True 'to always have 1 populated
I'm trying to calculate a multi-variable equation based off of data in a table with different criteria. If you reference the attached spreadsheet I am trying to calculate cost based on weight and zone. For the data entered in cells B1 and B2 944.01 would be the cost. If you look at the table in G2:N3 you'll notice that the values in G2 and G3 are the weight limits G2 is from 0-4999 and G3 is 5000+, this should impact where the value in B1 falls. B2 should select from H1 to N1.
View 3 Replies View RelatedI have looked at the below Hide/Show Pivot Table Field Items help web pages:
Hide/Show Pivot Table Field Items
Hide Pivot Table Fields Pivot Items by Criteria
I am trying to use the above, but with dates in the following format in each cell:
YYYYMM
200612
200701
200702
200703
200704
200705
200706
etc, etc
The below code is working for >200702 and removes all years/months prior to this entered value. Unfortunately the code does not work when a user enters <200706, instead the code goes through to the “NonValidCriteria” prompt.
Sub HideByCriteriaYYYYMM()
'Declare variables
'SEE: [url]
'SEE: [url]
Dim pt As PivotTable, pi As PivotItem
Dim lMonth As Long
Dim strCri As String, strCri1 As String, strCri2 As String
Dim bHide As Boolean
Dim xlCalc As XlCalculation
I have a table that looks like the following, only it's actually much larger:
_Red Blue Green Blue
A 2 4 2 3
B 5 2 1 1
C 3 1 2 5
D 2 3 4 2
As an example, I'm trying to sum all cells that match Blue and C. The answer should be 6, but I always end up with either zero or #VALUE.
I have the following code that performs a row copy based on selected dates which is then pasted to another sheet as a report. I need to also perform the same copy from another sheet with the same structure so the All_Report contains the data from both sheets. The name of the other sheet to copy the information from is "Closed_Requests".
View 10 Replies View RelatedI have a workbook containing sheet 1 and Sheet 2
The idea is to find the new references that have been created every month in sheet 2 and paste into Sheet 1. How to find the new ones is easy .However I don't know how to move the data around sheets!
Sheet 2 (A1: AQ25135)
A
B
C
D
FIND NEW PO
Purch.DocItem
Vendor
Vendor Name
200095185710
200095185710
15152695
UAB Pajurio Gabija
[Code] ......
I need to do the following:
Whenever you find the word "NEW" in a row of sheet 2 in range A2:A50000 copy the row from B to AM and paste it into sheet 1 Column A to AL.
However Column A contains already data. The data should be pasted right below the last A row with data
In sheet 2, column A contains the following formula
(=IF(B2>0,IFERROR(VLOOKUP(B2,Sheet1!$A$2:$A$20182,1,0),"NEW"),"")
The possible results are : Numbers>0, “NEW” and “” as you can see in table Sheet 2
Data exists in a workbook's sheet name "0293" in columns A, B, C, & D. If a row's value in column B exceeds zero, the entire row & formatting needs to be added to the bottom of data in a sheet called "Comprehensive" of the same workbook and put 0293 in column E of the same row. What would be the simplest VBA code to copy sheet 0293's data & add it to the "Comprehensive" sheet with the sheet name in column E of the same row?
View 2 Replies View Related