Automatically Filter Date Column Based On Dropdown Of Month
Sep 18, 2012
I want to be able to show only the dates whose months are selected in the drop down in cell A1. I've been able to do this with a Macro that I must run every time I change A1; however, I was wondering if there was a way to have the macro done automatically. I've been trying the Worksheet_Change options with little command. In addition to all of the If/Thens, I've also tried the If/ElseIfs as well:
VB:
Private Sub Worksheet_Change(ByVal Target As Range)
If Target.Address = "$A$2" Then
If Target = "January" Then
ActiveSheet.Range("$A$2:$C$14").AutoFilter Field:=1, Criteria1:= _
xlFilterAllDatesInPeriodJanuary, Operator:=xlFilterDynamic
[Code] .....
View 1 Replies
ADVERTISEMENT
Jun 9, 2014
I have a spread sheet that has three sheets, PROJECTS - TIMES - LISTS Time sheet.xlsx PROJECTS contains a list of 'In Progress' and 'completed' projects for work, with relevant other data, I.e. PROJECT No. / STATUS etc This will grow to 1,000's of rows TIMES will contain the amount of time a person spends on a PROJECT on a daily basis. This will grow to 10,000's of rows LISTS contain basic validation list for the first 2 sheets.
Part A
I would like to have a validation drop down list for the PROJECT NO column in the TIMES sheet that only lists the PROJECT NO from the PROJECTS sheet where STATUS <> COMPLETED. I.e. I only want to display the PROJECT NO's for current projects.
Part B
Even though I only want the PROJECT NO used, can the drop down list also contain other column's data for reference information only before one is selected.
View 2 Replies
View Related
May 8, 2009
how to make a certain type of date automate. It's kind of hard to explain, but basically, I'd like to make it so that when I enter a date in one column, another column will automatically populate with the 1st of the next month. For example:
If I enter 4/26/2009 in the 1st column, column 2 will read: 5/1/2009
If I enter 1/19/2008 .................................................. 2/1/2008
Also, it's very important that if the FIRST date is already the first of the month, then the second column will read the same. For instance: If I enter 3/1/2009 in the first colum, the second column will ALSO read 3/1/2009.
View 3 Replies
View Related
Apr 22, 2014
I have a table with business data such as units sold, revenue etc. entered by date (1/1/14, 1/2/14...) for 4 different business units. I have this data summarized in a pivot table. The pivot table is set up with the date filter as a row label. I would like to have a consolidated report on another worksheet with a drop down menu being used to control the date filter on my pivot table.
The following items would be on the drop down:
Yesterday, Month to Date, Quarter 1, Quarter 2, Quarter 3, Quarter 4 and Year to Date.
View 1 Replies
View Related
Apr 16, 2009
How do I add month automatically on a date? if my begin date is 06/01/09 and I want to add 6 months to it how can I populate:
06/01/09
07/01/09
08/01/09
09/01/09
10/01/09
11/01/09
View 9 Replies
View Related
Mar 8, 2012
I need to create a drop down menu where the contents are based on a separate table that has been filtered dependent on a choice made in the initial table.
In Sheet "Bookings" I have a list of lesson times for a riding school.
One of the columns is labelled "Customer experience" and contains either "Advanced","Intermediate" or "Novice"
A second column is designed to assign the name of the horse used by that rider during the lesson.
Horse details can be found a second sheet called Horses.
The horses are rated "Advanced" can only be ridden by Advanced Customers, whilst Intermediate ones can be ridden by both "Intermediate" and "Advanced" customer. Novice horses can be ridden by anyone.
Ideally I would like to be able to include a drop down in the Bookings table that contains the name of available horses.
View 1 Replies
View Related
Jan 28, 2010
I have a spreadsheet that is now a yeare old with 5000 rows and is now going into the 2nd year
Column A is for date input and the same date can be repeated several tumes :-
1 Jan 09
1 Jan 09
1 Jan 09
1 Jan 09
2 Jan 09
2 Jan 09
3 Jan 09
3 Jan 09
3 Jan 09
Sometimes there are all 30 /31 days but normally not .
I need to find the last ocurance of the last date used for each month and then use the cell number to calculate the column totals for that month.
View 9 Replies
View Related
Aug 4, 2009
I'm using sheet for ledger. For entering date I use =today() but I want to do that in date column(A) I set a formula only once that if I enter data in 2nd column it automatically add today date and if data enter day after tomorrow it will add corresponding date. Is this possible?
View 9 Replies
View Related
Apr 4, 2009
I would like to create a financial modeling spreadsheet. Basically my problem is this; I want to have a month by month row for 5 years. For the value of each one I would like it to increase by 950 per month automatically.
View 4 Replies
View Related
Jun 20, 2014
I am trying to make a excel sheet in which i will first keep a big database of data which will have following columns
1. Serial no.
2. Product
3. Price
and there will be a different sheet where if i select a serial No from the dropdown , the product and price corresponding to the serial no will come automatically beside it in the same row.
View 2 Replies
View Related
Jan 3, 2014
Is there a Column Filter Drop down Keyboard Shortcut for Excel 2013?
In Excel 2013, is there a keyboard shortcut to access the column filter drop down. For example, if you are on the cell A1, and you select Filter under the data menu and you want to filter column A without using your mouse, is there a keyboard shortcut to do this. I know Alt-A-C, clears the filters, but I want to know if there is a shortcut to access the filters in the column. In case my explanation isn't clear, I have included some screenshot pictures of the filter, before and after it is selected, to show what I am talking about, and what I am trying to accomplish without the mouse.
column filter.PNG
Filter Dropdown.PNG
View 3 Replies
View Related
Jan 8, 2014
How to correct this formula to get correct output.
=IF(P9=TODAY(),IF(P9<>"",CHOOSE(MONTH(P9),
"January","February","March","April","May","June","July","August","September","October","November","December"),""))
It's working fine if the year is 2014 but not if the year is different.
Conditions:
If the date is today then only the month should display else blank. The year should be ignore.
For example:
08/01/2000: January
01/01/2000: blank cell
08/01/2014: January
01/01/2014: blank cell
The date is in column 'p' in dd mm yyyy format. In short if the date is current date that is for today '8' then only the month should be display in the output.
View 10 Replies
View Related
Jan 6, 2013
I have a sheet where I have a "Status" column in each row which could be "Waiting for Band", "Waiting for Organizer", or "Ready to Go!". These options are set as a data validation list. I have 2 cells later in each row where the response can only be "Yes" or "No". I want for the Status column to be set automatically based on the responses in the later two cells. So for example
where C3 and M3 are Yes, the status column in B3 should read "Ready to Go!"
where C3 is no but M3 is yes, the status column should read "Waiting for Organizer"
where C3 is no and M3 is no, the status column should read "Waiting for Band"
The above is actually an exhaustive list of all of the potential outcomes(!)
View 4 Replies
View Related
Oct 22, 2013
I have a form with a number of fields. There is a field at the top of the form for Part number. When I type in a part number I need the form to auto complete any fields that are linked (if i can link them). E.g., if the part number is 111 then based on info in another table the fields will be auto completed for me.
View 2 Replies
View Related
Oct 15, 2008
I am trying to automatically add the last day of the month based off of the month
for example
a1 = beginning date
a2 = end date
a1 will always be the 1st day of a given month
then based off a1, know the last day,(i.e.... october 1, then put 10-31-08 into a2, or november 1, then put 11-30-08......)
View 10 Replies
View Related
Nov 21, 2012
I am new to VB macros, I am trying to figure out how to color a tab Green based on a selection from a drop down list.
View 9 Replies
View Related
Jun 14, 2014
I need to make a dropdown list (I know how to do that) and based on that selection, I need some cells below to automatically complete. How can I do that? Is it possible with or without VBA?
View 5 Replies
View Related
Apr 16, 2008
Private Sub Worksheet_Change(ByVal Target As Range)
ActiveSheet.AutoFilterMode = False
Range("d6:g6"). AutoFilter
Range("d6:g6").AutoFilter Field:=2, Criteria1:=Range("e1"), Operator:=xlAnd, _
Criteria2:=Range("e2")
I've attached the file also.
What i intend to do is that : (1) if i enter a value in E3, the filter should only apply using E3 value (currently its applying E3 value but if E4 is kept blank, it takes that as = " " ) . Unfortunately, i need to have the and condition, so i have to find a way in spite of this condition. Any way out ??
(2) If i enter values in A) E3 & F3 B) E3, F3, G3...then it ahould make multiple filtering possible. But when i try to apply such a condition, the same problem as in point (1) occurs, it takes the and empty criteria range as = " "
View 8 Replies
View Related
Apr 8, 2013
I have a spreadsheet where user can search for information inside a search box and the appropriate rows are returned using formulas.
I have a drop down list (Category: Model) in the search box as well as a search field (Category: Program, cell D2). Underneath the search box, search rows are returned with column categories: Program, Model, etc.
What I require is that if a user enters the specific program into the search field D2, then the dropdown list would automatically choose which model that program belongs to based on the returned row.
For example, if I typed "engine" into D2 and pressed enter,
Under the records section (Row 14 and beyond), the following record will pop up:
Program
Model
Indicators
Engine
F-16
3a
Based on the record, F-16 would be chosen from the dropdown list. Is there any way this can be done?
View 6 Replies
View Related
Apr 12, 2013
I have a workbook that has two worksheets. One worksheet is an input worksheet. A user will select a date from a drop-down list and type in the events that occurred on that date in 8 adjacent cells. The user selects a button that advances date and clears form. On sheet 2, whatever was typed into sheet one is saved via VLOOKUP formula. However, if I try to change something retroactively and select a previous date from the drop-down list, it clears everything in sheet 2 that was typed for any selected day.
View 1 Replies
View Related
Apr 25, 2013
I'm trying to copy data from one sheet to another sheet automatically based on a number selected in a drop down control.
I have used OFFSET to pull some information successfully from a list. This is easy for me to do with single entries and a list and has worked well. I want to do similar but with a dataset not just single cells.
But, I can't seem to make OFFSET work to show a set of data easily.
Perhaps I will need VB code to do so? Or there is another control I'm not aware of? I've done very little with VB.
I'll attach a sample file to try to show better what I'm trying to do.
View 7 Replies
View Related
Oct 12, 2011
I have a dropdown list in C24:C50 (=CategoryList) with data validation and a sub list in D24:D50 (=ItemList) with data validation. I am looking for a way to have code automatically run after selecting an item in the data validation dropdown list in column C.
Example; I click on C24 and make a selection. I what it to trigger code that would move me to D24 and open up the data validation list in D24. After the selection in D24 I would like it to move me back and down 1 row to C25. I have not found anything directly related to this but I have found that code can be run after a selection in a valadition list.
View 2 Replies
View Related
Apr 8, 2014
i want to generate sheet automatically from existing sheet applying auto filter on specific column. i attached the sample which 3000 rows actually i have more than one lac rows so i have to put filter on sub_div column and then copy and paste to another sheet and give the name of sheet like F21. i want to do automatically this provide vba code or function for this
View 3 Replies
View Related
Mar 14, 2014
I have an excel sheet wherin there is a column that has the data where in the dates are displayed and many other columns.
I get this excel every Thursday so i want to filter this date column in such a way that it give me the data related to the date of the previous week only yet there is a catch here. When i say previous week i mean.
Suppose today is 03/14/14 then i want the data from 03/07/14 till today ie Last week friday to this week full( so cant use Current week option) and then paste it in a new sheet.
I tried the Record part but in that it is taking a hard coded value as i am selecting the date myself. I dont want to change the date manually every time.
this was the macro that was created
Code:
ActiveSheet.Range("$A$1:$BX$58").AutoFilter Field:=1, Operator:= _
xlFilterValues, Criteria2:=Array(1, "3/10/2014")
Range("A59").Select
ActiveCell.FormulaR1C1 = "=COUNT(R[-4]C:R[-1]C)"
Range("A60").Select
View 8 Replies
View Related
Jan 16, 2013
I have a spreadsheet with a column showing dates (dd/mm/yyyy). I need the column next to it to display the month only (Jan,Feb etc).
How do I create a column to show the month only using the date column as a reference.
View 5 Replies
View Related
Oct 18, 2009
I have 4 columns
Column A is "Customer Number"
Column B is "Date Can Opened"
Column C is "Month" (currently blank except header row)
Column D is "Year" (currently blank except header row)
I would like a macro to do 2 things here....
1. Extract the Month part of the "Date Can Opened" column and put it in column C.
2. Extract the Year part of the "Date Can Opened" column and put it in column D.
Currently, the "Date Can Opened" column is formatted as a date like */14/01 taken from the Number tab in the Format Cells dialog box) ...
View 9 Replies
View Related
Mar 7, 2014
I want to create a macro assigned to a button that copies values from one cell to another.
I want it to be smart in that way that it should copy the values to predefined cells cells based on the month that has been selected in a drop down field. So if i select for January, it should copy the fixed selection to other target cells then when September was selected.
View 1 Replies
View Related
Dec 1, 2012
In a sheet I enter the following:
... in A1 a year (say 2012)
... in A2 a month, formatting as "MMM" (JAN, FEB, MAR etc.)
How to automatically get in column A (say from A3) all the dates of the month entered, formatting as "D/M/YYYY" (e.g. 1/1/2012, 2/1/2012/ 3/1/2012, etc.)?
View 3 Replies
View Related
Jan 21, 2010
I have a spreadsheet for monthly supplies. In row 1 is Jan – Dec and in the row 2 below are empty cells where there will be a total for that month’s purchases. I want a conditional format formula to automatically bold and highlight the current month’s total and month name.
Also, when I enter February totals next month and that number is input into February’s total, I want that month and total to bold and highlight BUT I also want the previous month’s bold and highlight to vanish at the same time. Is this possible?
View 9 Replies
View Related
Jul 19, 2006
Is there a way to make the attached worksheet automatically shade out all the Saturdays & Sundays in any given month everytime you change the Month/Year cell at the top of the worksheet, as example? I've tried using the weekday/Weekend formula, but can't quite get it right.
View 2 Replies
View Related
