I'm trying to create an IF formula that returns the month as text between a certain date range in a different column.
For example
Between the 25-APR-09 and 23-MAY-09 I want to display "May" 24-MAY-09 and 27-JUNE-09 "June"
And so on so forth, the column with the dates in it is in date format.
I've created an IF statement with multiple formulas, but I can't seem to
figure out if it is possible to pull the information by a specific date
range. I have sales reps that visit customers on specific dates and I need
my tally sheet to only pull dates within that current week. Does anyone know
if this is possible??
This is what I have so far:
=SUM(IF(sales rep!AB2:AB216=I3,IF(sales rep!$AA$2:$AA$216=I4,IF(sales
rep!P2:P216=I7,IF(sales rep!$N$2:$N$216>=DATEVALUE("3/18/2005"),1,0)))))
If you look above I have it to calculate the date value starting at
03-18-05, but I would like it to only pull that date through the next week.
Creating a formula that basically has a big IF statement. I hope this makes sense, so here goes. I am looking to find the "age" or "elapsed days" of an ID from when they created an account to when they stopped. This might be very complex and if there's not a way to calculate the Elapsed days (even though that's what I prefer), perhaps there is some formula that can return a value like a "1" or "True" or something that lets me know the statement is true.
original formula from post 3261273
{=IF(D2>0,A2-INDEX(A$2:D$16,MATCH(B2&"1",B$2:B$16&C$2:C$16,0),1),"")}
New formulas needed or revised from the above:
Formula 1: If the ID in column 2 are the same, and if there is a value in column 3 (Create) and a value in Column 4 (Suspend) AND there is no value in Column 5 (Stopped), then subtract the dates in column 1 for Create and Suspend. My manual calculation result is in the column called "Elapsed Days (Create to Suspend but NO Stopped)
Formula 2: If the ID in column 2 are the same, and if there is a value in column 3 (Create) and a value in Column 4 (Suspend) AND there is no value in Column 5 (Stopped) OR Column 6 (Unsuspend), then subtract the dates in column 1 for Create and Suspend. My manual calculation result is in the column called "Elapsed Days (Suspend Only, No stopped or Unsuspend)"
Formula 3: The ID in column 2 does not have to be the same, but if there is a value in column 3 only (Create) and there is no value in the Suspend, Stopped, or Unsuspend columns, then place a "1" in the cell. My manual calc is the "Create Only" column.
Event Date
ID
CREATE
Suspend
STOPPED
Unsuspend
Elapsed Days (Create to Suspend but NO Stopped)
Elapsed Days (Suspend Only, No stopped or Unsuspend)
[Code] .........
How can I have an if statement or other type of formula look at a date and add 26 months and determine if it's 26 months old yet.
example
assuming that November 4, 2005 is one day from being 26 months
as of today That cell next to it would say "Available"
Then the next it would say "Retired" because it hit the 26 month old period.
Column A : Date & time ( 23 march 2011 14:35 )
In column B: I want the formula to look at column A and return three possible asnswers.
If the time is between 06:00 to 13:59 = AM shift
If the time is between 14:00 to 21:59 = PM Shift
If the time is between 22:00 to 06:00 = Night Shift.
Remember there is a dat attached to the time. I do not want to split the date & time.
I am trying to use a IF statement to extract date data by months.
e.g. : =IF(I13134="A",H13134(Date field) - (date by 3 months)
I hope that makes sense:
So I guess if the field I13134 has the letter "A" in it - Look at field H13134 and subtract that date by 3 months.
I have several columns as so:
B - Patient Surname
C - First Surname
D - Postcode
E - Date
F - Results of If Statement (Days Difference)
I am looking to comapre b, c, d with teh previous cells to make sure I am looking at the same person hcen the AND statement. If they all match then if subtracts the latest date (column E) from an ealier date for the same person. If the person is different it will return a 0. If the date is the same ti will return a 0.
I have done this so far - =IF(AND(B2=B1,C2=C1, D2=D1),(E2-E1),0)
What I am struggling to do is if the number of days (E2-E1) is 0-3 then for the result to show the text "Less then 3". If the value is 4 - 7 then to have it read "Less then 7", anything over 7 to read "OVer 7".
I guess because I use a drop down box and another cell reference for the date, my IF/AND statement isn't recognizing the date and therefore gives me a "FALSE" result. I have the date formatted as a date.
I've tried referring to cell I2 which is the drop down box - that doesn't work. I've tried using quotes around the date as if it were text - that doesn't work. If I use just the w10=3 part, that'll work fine but it must be associated with the proper week otherwise every 3rd of the month that falls on a friday will be a holiday.
I wan to set up an IF statement so that if the date in Column A is between 4/28/14 and 7/17/14, it will return "Q3" and blank if no date.
View 1 Replies View RelatedThis formula is being used in a vacation time spreadsheet. So after each paycheck the if statement is applied and need to calculate the accumulation for that week based on if the person has worked 5 yrs or less. I need to stop the today's date calculation in the if statement after it is used. So that each time the spreadsheet is opened the values are a fixed number not changed based on the current date. However if the if statement is pasted into the next pay week it will calculate based on the actual date.
It is calculating is the following:
C4 = 5yrs Anniversary Date of Hire
3.08= less than 5 yrs
4.62= more than 5 yrs
=IF(($C$4)<=TODAY(),4.62,3.08)
[URL] ......
I have a statement in a cell in which there is a date field.
Is it possible to apply Vlookup on the statement and change the Date value keeping the statement same ???????
I have a workbook that is titled "Results". It has 2 columns that I need, a 'status' column (B) and a 'finalized date' column (C)
Column B is the 'status' column: Formula: ('[May Database]Summary'!$B$1)
The May Database B1 column is a dropdown with options "In Progress" and "Final" that will be switched manually.
The results workbook pulls it's status from the May Database workbook.
So I need my results workbook to update it's 'finalized date' column (C) when the May database says "Final" but populate and save the day that the May database was manually switched to 'Final'
My question is would this formula work?:
Results workbook status column: C1= IF(B1="Final", Now(), "")
Would this save the date when the May Database was manually switched to 'Final' or will this just update my current day everytime I open this workbook since Now() returns current day? Is there a way to save a date when it was finalized and then keep that date?
Is this is just an example, but the logic should hold true. Data for example is in A1:C5. I want to use a SUMIFS statement that will look at type of Vehicle and Dates. So for the example in cell D1 (I wanted to add only Cars sold between May 1-2), but my current equation = 0, where I am expecting 20
=SUMIFS(C1:C5,B1:B5,B3:B4,A1:A5,A1)
I am now trying to create a excel macro to auto populate all the dates with reference to a start date and end date. The catch is that only working days are required in the range. My reference cells (start and end date) are in Sheet 1 while the destination cell range are in Sheet 2. The reason for creating a macro instead of a function is that the intervals between the start date and end date changes frequently (annual, semi-annual and quarterly) Best case scenario would be a button which I can just press after i input the dates to generate the range of dates in another sheet.
View 1 Replies View RelatedThis is hard for me to articulate, so hopefully someone will understand what I'm trying to do.
I'm attempting to construct a formula in Excel, that basically says: IF the value is between these two numbers, multiple them by this percentage, or if the value is between these numbers, multiple it by this percentage.
So, let's say cell A3 equals 10,000,000, A2 equals 5,000,000 and A1 equals 1,000,000... Also cell B3 equals 10% and B2 equals 5%. We'll say that number X is in cell C1. If the number X is between 10,000,000 & 5,000,000 it should by multiplied by 10%. If number X is between 5,000,000 and 1,000,000 it should be multiplied by 5%.
I've tried a formula similar to: IF(C1 (Rng(A3:A2), C1*B3) ---- Meaning that if the number is between 10,000,000 and 5,000,000, multiple the number by 10%.
I have a employee travel spreadsheet with air travel dates in two columns. I want to be able to create a rule that will highlight all the cells in a row if the date range on that row fall includes today's date. if someone is traveling in the event there is an emergency and I need to know if they are traveling that particular day. I have attached a sample spreadsheet.
View 3 Replies View RelatedI have a worksheet with a range of dates in column E. What I would like is a formula that states If any of those dates is less than or equal to 10 (days) from today and column H text is not "Yes" then show text "Email outstanding Actions" else show nothing?
View 4 Replies View RelatedI am trying and failing to write an if statement in excel (not vba) to check the contents of cell H3069 to see if it equals 29/06/2011.
I have written the following
Code:
=if(DateValue(H3069)="29/06/2011","Y","N")
which returns #Value!
I have a query around dates and current project status.
I1 Contains the Current Date
C4 Contains Due Date
C5 Contains 4 Possible Selections. Not Started, In Progress, Awaiting Feedback,
Complete
What I want the formula to do is.
IF Current Date is greater than Due Date AND Current Status is either Not Started or In Progress then return Overdue.
I've written it as follows, but it doesn't seem to work?
=IF(I1>C4,IF((C5="Not Started",IF(C5="In Progress"),"Overdue",""),""))
I need to create formulas that reference a single date and output date ranges. The objective is to have a person input a Monday date in any given month and receive a four weeks out worth of dates and ranges. For example: In a lone cell, the person inputs 10/13/08. Automatically, the sheet produces the next full week range: October 19 – October 25 in a single cell and also produces a cell for each date. Example: Sunday 19, Monday 20, Tuesday 21, etc…. It should look like:
Monday Date:
10/13/08
October 19 – October 25
Sunday 19
Monday 20
Tuesday 21
Wednesday 22
Thursday 23
Friday 24
Saturday 25
and then repeat for three more weeks. I thought I had it figured out until the month changed. The dates continued in October instead of adding a month. This report will be ran weekly, so simply adding a +1MONTH to some cells will not benefit me as I’ll have to change the formula every week. I want the formula to compute the data without any manipulation over the next several years. The only change will be the Monday date.
I am trying to loop through a range, checking for a cell to contain one of two characters and then put a value in a cell to the side (well 3 away) of it. Im getting an error for Type mismatch on line:
VB:
If CellContent = "h" Or "v" Then
the data in the cell is an along the lines of '12.34.56.43 som-thi-vh-ng1'
VB:
Dim MyRange, MyCell As Range
Dim CellContent As String
Sheets("Sheet1").Activate
[Code]....
I am trying to do a calculation based on the conditions of two cells but one cell I would need the range of the report. Either way, here is my current statement.
=IF(P2:P15 = "Green Building 15",SUM(COUNTIF(C2:C15,"Over AC")+COUNTIF(C2:C15,"Top Lab AC")),0)
I get a Value# error (though it systematicaly works if you check in the funtion area), and its because of the range I am using, is there anyway to bypass thiss issue or can someone give a better calculation.
I have tried over and over to get a point value from the percentages posted below but my formula will not return consistent results. Am I doing something wrong.
94% - below 1 Point
95%-96% 2 Points
97% 3 points
98%-99% 4 Points
0% or 100% 5 Points
Reference Cell is AG2 and is .99 but for some reason I return a 5
=IF(AG2=0,5,IF(AND(AG2>0,AG2<=0.94),1,IF(AND(AG2>=0.95,AG2<=0.96),2,IF(AG2=0.97,3,IF(AND(AG2>=0.98,A G2<=0.99),4,5)))))
I dont know how to nest and if (if that is the right way to go about it). this is what I have ....
View 10 Replies View RelatedNeed all numbers in between the ranges set. So if I input for example 8765 then the cell still comes up with 18.
IF Cell E25 is 0-7200, then 12, If cell E25 is 7201-14400,
then 18, if cell E25 is 14401 - 21600, then 22,
if cell E25 is 21601-28800, then 28, if cell E25 is 28801 - 36000, then 34.
so on sheet 1 i have a list in column b (as below) and in column G I want to put a note "not included" if the cell matches what is in sheet 2:
AAA
BBB
CCC
DDD
EEE
On sheet 2, column A I have a list of items that I want to not include which I want to be able to add/remove/adjust over time. For example:
DDD
EEE
FFF
LLL
I can get it to put in the correct text into sheet 1 with the following but I don't know how to get it to look through all values on sheet 2 and then only enter the "not included" on sheet 1 if it is listed on sheet 2.
So far I have
Sub checksheet()
For Row = 1 To 428
For col = 2 To 256
[Code]....
This only does it for what is written in cell A3 on sheet 2 and does not keep going down the list in sheet 2.
I think I need to define the range better on sheet 2 and ask it to look through that, but im not too sure.
I was making a simple spreadsheet as I'm taking practice tests for some IT certifications and the spreadsheet I was making was to chart out my progress.
I had a range of scores in some cells and one of the formulas I used so that I didnt have errors in the sheet like div/0 went like the following:
=if(b5:b50="","",sum(b5:b50)) this seemed to work really well for the one section, however I tried to get a little fancy as always and I think I messed something up. Beneath that I tried to separate each practice test with the same sort of formula resulting something like the following:
=if(b30:b40="","",sum(b30:b40)) this however just returned an error #value. I dont understand why the first formula worked and the second didnt. Then again, I'm not really an excel guru, back in college I was really good with it but I dont really remember much.
I'm trying to create an if statement that have 2 criterias. Here's what I've created:
=IF(COUNT(F2:F4)=('2007Open'!H2:H4),COUNT('2007Open'!B2:B4)=8,'2007Open'!H2:H4)
This statement is returning the #VALUE error.
I guess what I'm trying to do with this statement is to count how many values are not equal to 2007Open!H2:H4 and meets another criteria of 8.
I need a formula that will return "true" only if ALL cells in the specified range are not Null (<>""). I'd like to assign a value (% complete) only after all tasks under a phase have been given a completion date.
View 7 Replies View RelatedI have created a spreadsheet which creates an average of feedback for trainers in a training company. The form adds up the feedback score into column L of the summary sheet and I have created a summary sheet which I want you use to calculate the average for each trainer.
I have cobbled together an array formula which creates the overallaverage for each trainer based on the named ranges entered via the form.
It looks something like this: