If Statement - Need To Stop Today Date Calculation
Feb 4, 2014
This formula is being used in a vacation time spreadsheet. So after each paycheck the if statement is applied and need to calculate the accumulation for that week based on if the person has worked 5 yrs or less. I need to stop the today's date calculation in the if statement after it is used. So that each time the spreadsheet is opened the values are a fixed number not changed based on the current date. However if the if statement is pasted into the next pay week it will calculate based on the actual date.
It is calculating is the following:
C4 = 5yrs Anniversary Date of Hire
3.08= less than 5 yrs
4.62= more than 5 yrs
=IF(($C$4)<=TODAY(),4.62,3.08)
[URL] ......
View 1 Replies
ADVERTISEMENT
Jul 26, 2007
I have several columns as so:
B - Patient Surname
C - First Surname
D - Postcode
E - Date
F - Results of If Statement (Days Difference)
I am looking to comapre b, c, d with teh previous cells to make sure I am looking at the same person hcen the AND statement. If they all match then if subtracts the latest date (column E) from an ealier date for the same person. If the person is different it will return a 0. If the date is the same ti will return a 0.
I have done this so far - =IF(AND(B2=B1,C2=C1, D2=D1),(E2-E1),0)
What I am struggling to do is if the number of days (E2-E1) is 0-3 then for the result to show the text "Less then 3". If the value is 4 - 7 then to have it read "Less then 7", anything over 7 to read "OVer 7".
View 8 Replies
View Related
Sep 7, 2012
Creating a formula that basically has a big IF statement. I hope this makes sense, so here goes. I am looking to find the "age" or "elapsed days" of an ID from when they created an account to when they stopped. This might be very complex and if there's not a way to calculate the Elapsed days (even though that's what I prefer), perhaps there is some formula that can return a value like a "1" or "True" or something that lets me know the statement is true.
original formula from post 3261273
{=IF(D2>0,A2-INDEX(A$2:D$16,MATCH(B2&"1",B$2:B$16&C$2:C$16,0),1),"")}
New formulas needed or revised from the above:
Formula 1: If the ID in column 2 are the same, and if there is a value in column 3 (Create) and a value in Column 4 (Suspend) AND there is no value in Column 5 (Stopped), then subtract the dates in column 1 for Create and Suspend. My manual calculation result is in the column called "Elapsed Days (Create to Suspend but NO Stopped)
Formula 2: If the ID in column 2 are the same, and if there is a value in column 3 (Create) and a value in Column 4 (Suspend) AND there is no value in Column 5 (Stopped) OR Column 6 (Unsuspend), then subtract the dates in column 1 for Create and Suspend. My manual calculation result is in the column called "Elapsed Days (Suspend Only, No stopped or Unsuspend)"
Formula 3: The ID in column 2 does not have to be the same, but if there is a value in column 3 only (Create) and there is no value in the Suspend, Stopped, or Unsuspend columns, then place a "1" in the cell. My manual calc is the "Create Only" column.
Event Date
ID
CREATE
Suspend
STOPPED
Unsuspend
Elapsed Days (Create to Suspend but NO Stopped)
Elapsed Days (Suspend Only, No stopped or Unsuspend)
[Code] .........
View 1 Replies
View Related
Jun 2, 2014
How to produce a formula that will stop counting after the day is over. For example, i have a spreadsheet that is calculating the total number of pending questions for multiple project types which are found on seperate tabs. The first tab of my spreadsheet is a Summary tab which displays the statistics of each project tab including how many questions we have pending. The number of questions are calculated by picking up how many cells display "Y" in the PQ (pending questions) column of each tab.
Our current process is to type in the number displayed in the summary that shows how many questions we have pending. What that does, is freeze the total number of questions we had pending for that day. I am trying to make this more automated by coming up with a formula that will freeze this number on its own.
If I write out what I am trying to do, it would go something like this:
Count cells with "Y" and stop counting after today.
Current formula in cell:
=COUNTIF(MDU!$L$6:$L$1000,"=Y")+COUNTIF(SDU!$L$6:$L$1000,"=Y")
View 1 Replies
View Related
Apr 23, 2009
I'm trying to figure out if an employee is in probation period or not. I have this formula in S3 =IF(TODAY()-R3>90, "No", "Yes"). I need to leave S3 empty if no value in R3 (R3 contain hiring date)
View 2 Replies
View Related
Apr 29, 2014
I have a worksheet in which i have rows with yellow colour. In that sheet I Have written formula in that cells & rows. But i want that as soon as the total (SUM) of yellow coloured row crosses value 20 ALL THE ROW CELLS SHOULD BE ZERO. How can i do this
I am attaching sample sheet. EXAMPLE15.xlsx
View 2 Replies
View Related
Aug 20, 2009
Example: I have Sheet 2 set to autocalculate on activate using vb. So when you click on that tab "Sheet 2" it will autocalculate.
My Question is, I have another macro that is copying information between Sheet 1 and Sheet 2. And I don't want calculation to occur during the macro but since it has to select Sheet 2 it performs the autocalculate. Do I have any options to prevent the calculation from occuring when I run my copy paste macro? I only want it to autocalculate when the user selects sheet 2
View 4 Replies
View Related
Dec 1, 2006
I have a report whose calculation time I've reduced greatly by turning off automatic calculation and including in the worksheet code directions to only calculate the impacted range. BUT, it still takes a lot of time to calculate on close, when I turn automatic calculation back on. I'm afraid my users will think their machines have crashed. Does anyone know of a way so that on close, the workbook does not calculate, even though Calculation is turned back on to automatic?
Private Sub Workbook_Activate()
With Application
.Calculation = xlManual
.MaxChange = 0.001
.CalculateBeforeSave = False
End With
End Sub
Private Sub Workbook_Deactivate()
With Application
.Calculation = xlAutomatic
.MaxChange = 0.001
End With
End Sub
View 2 Replies
View Related
Jul 3, 2014
I have a percentage calculation that I need to ensure excel does not round up the last digit.
My calculation is 2463000(cell:I13) divided by 257000(cell: I14+I15)
Excel calculates this value to be 0.958365759
However I need it to display and re-use only 0.9583657 as my calculation has to be precise to 7 decimal places.
If I use the formula =ROUND(I13/SUM(I14+I15),7) then excel returns the value 0.9583658 - it rounds the last digit up.
I have tried to use the option "Set precision as displayed" and set my decimal places to 7 but this still sees my 7th digit rounded up.
How do I set it so the 7th digit is not rounded up.
My original formula is =IF(AND((L3+L8+L13)<=O3,(L3+L8+L13+L18)>O3),((O3-(L3+L8+L13))*I18/L18))
I have updated it to be =IF(AND((L3+L8+L13)<=O3,(L3+L8+L13+L18)>O3),((O3-(L3+L8+L13))*(ROUND(I18/L18,7))))
View 9 Replies
View Related
Mar 17, 2014
I have a file that tracks orders placed.
Column A gives the request date of the order, based on the TAT in column B the projected dispatch date gets calculated.
Once the order is dispatched and the date gets updated in column Z, the redemption status in column V gets updated as "Dispatched within TAT" or "Dispatched out of TAT" based on whether they have met the TAT or not. If the dispatch date is left blank then it shows "Yet to be dispatched".
My problem is that the column D does not stop calculation even after the order is dispatched. And therefore because of the conditional formatting turns red the minute the number is more than 0. So it is misleading.
View 3 Replies
View Related
Nov 19, 2009
I have data going in to a small table which has some empty rows as that data is not yet available... My problem is, I need to sort this table in date order but with the date nearest to today's date at the top...
The sort function puts oldest at the top or oldest at the bottom which is no good for what I need...
I use xl 2003.
View 9 Replies
View Related
Nov 6, 2008
I would like to perform what seems like a simple calculation: =IF C1>0, THEN A1-C1, IF C1=0, THEN DO NOTHING. How would this look as a formula?
View 4 Replies
View Related
Apr 29, 2014
Attached is an example of the program. The purpose of this program is to allow someone with very little knowledge about the information to enter data. The first tab labeled "Instructions" is will have two macros assigned to the buttons at the bottom of the page. The first macro labeled "Move Data" will move data will clear data in the shaded cell on the "Entry Form" sheet and fill those cells in with '----. The second macro labeled "Generate and Save" will save a master copy of the program, save a historical copy of the program by date, and print/save a pdf copy of the "Reports" sheet.
Each one of the historical (the last 8 sheets of the program) sheet receives data from the "Entry Form" and then moves the data by date into the table for archiving purposes.
If you look at the code for the "Entry Form". I have a couple of subs. The first being Worksheet_change. the first section of this code is to force certain cells to be uppercase. This part of the code is working fine. The second part of the code is the Dim MyValues. This part is working fine also, but...
My issue is... When I run the move data macro from the "Instructions" sheet the Dim MyValues reads these as changes to the cells and wants to push the data to the historical sheets.
What I would like is an IF Statement above the Dim MyValues part of this code that stops the Dim MyValue part of the code running if those values are blank, 0, or have '---- entered into them.
Test.xlsm
View 3 Replies
View Related
Jan 5, 2012
I've created a very simple formula which counts the number of days from Today and excludes blanks.
I'm trying to set it up so the formula *stops* counting the days once a cell in column C is populated.
Formula so far...
Code:
=IF(A3="", "",A3 - TODAY())
It looks exactly like this this [URL] .....
View 7 Replies
View Related
Nov 4, 2013
I am putting together a spreadsheet that needs to perform different calculations based on the information that is plugged in to the spreadsheet. Right now, I have a simple formula for my final product, which is:
=G2-E3-F3+C3+D3
But, if the variables change, then I have another cell with this formula:
=IF(OR(C4=0,D4=0),"",SUM(G2,H3))
Now, my first problem is that I need to get the information regarding D4 out of the above formula. Someone wrote the formula below to combine the information in cell C3 & D3, so I no longer need the reference to cell D4 in the above formula. How to remove the D4 references without getting an error.
You will notice that the 2nd formula has cell C4. This cell has an IF statement in it. The statement is as follows: =SUM(IF(C3=0.875,D3-0.625,D3))
Basically, what I need to do is to combine the first & second formulas on this page. How to do that.
View 2 Replies
View Related
Feb 2, 2007
How to stop macro while running SendKeys statement. I am not able to stop the process while running SendKeys statement. this is my Sendkeys VBA
For Each cell In Selection
SendKeys cell.Text, True
Next cell
View 3 Replies
View Related
Oct 2, 2013
I need a If statement that can be used on 2 columns.
If there is a 1 in the first column I want to indicate if the 2nd column is 50% or greater with a number 1.
View 3 Replies
View Related
May 29, 2014
I have a workbook that I'm using to tracking staffing patterns within a mental health agency. When the workbook opens the user is asked to pick a date range and an office location. I've placed code into the userform that pre-fills the "start date" with today's date and the "end date" 7 days from today's date. I would like the user to be able to enter a unique date range should they wish but I have yet to figure out the coding to accomplish my goal.
[Code] .....
Attached File : Staffing Report 1.90.xlsm
View 7 Replies
View Related
Apr 8, 2009
I am trying to get the results of the number of days between today and a future date. I am using ="cell containing futuredate"-today() and it gets me the correct number of days. The problem comes in when I have yet to populate the future dates. I am getting -39991 (numeric value between today and jan 01 01) and because I am also using conditional formatting this is even more of a problem. Is there a way get excel to display nothing if it is a negative number? or to give a specified resut if the number becomes negative such as Expired or something of that nature?
View 3 Replies
View Related
May 19, 2009
I need a formula that will calculate the number of days from a date entered into cell A1 to today's date. Whether it's before or after todays date. Example:
5/10/2009 to today is -9
5/22/2009 to today is 3
View 2 Replies
View Related
Mar 20, 2014
Trying to do a linkback from another post located here but not having much luck doing it: [URL]
I'm working with 2 date columns and trying to filter a view to only include projects with dates within 3 months of today's date.
I've attached a current working file of the data and the end result i'm hoping to achieve via a macro of some sort.
I've manually got it to work via formula by inserting 2 additional columns (highlighted yellow) which determine if the dates "YES" fall in this 3 month time frame of "" blank if not.
create a macro which does all of this automatically without modifying any columns if this is possible
View 5 Replies
View Related
Sep 18, 2008
I have a worksheet that has a sent date and expected delivery date I need create a macro that will alert me if today's date is within 5 days of expected delivery date.
View 14 Replies
View Related
Jun 12, 2014
Trying to automate the period part of the impt function
To calculate current value of loan i have the below formula below with the 3 being the current period
=IPMT(4.3%/12,3,5*12,-7000)/(4.3%/12)
What i would like to do is for the period to be self calcuating from current date and the loan start date. I can return a value in days using start date - today() and aware month function returns the month number but stuggling to find a way to work out cumulative month from the start date.
View 4 Replies
View Related
Jun 27, 2014
is it possible to display the week number of todays date (today()) from a physically entered start date (which would obviously be week one), the start date would be november 4th 2013.
View 3 Replies
View Related
Dec 31, 2013
On A3: D10 I have information on C1 a have date and E3:E10 I will input date
i.e. If the date entered in E3 is the same as or larger than the date on C1 then Blank the entire line A3: D3
View 3 Replies
View Related
Feb 7, 2013
If a1,a21,a41 have a value greater than 0, I wish to stamp cell b1,b21,b41 and so on with todays date, but without the stamped value changing/advancing tomorrow. At the moment cells b1,b21,b41 are copied down as follows. =if(a1>0,TODAY(),"") This works fine, but the date stamp of course changes tomorrow. I can not apply code to the whole b column as cells b2:b20, b22:40 etc have other non-date format data to which the code does not need to apply - the todays date value cell occurs every 20 cells.
View 6 Replies
View Related
Jan 17, 2013
Cell B1 contains a date, then B2 contains a formula that says:
=IF(A1>TODAY(),A1,A2)
A1 contains a green tick and A2 contains a red cross.
What I am trying to add is that if B1 contains no date then B2 needs to be blank.
I tried using =IF((A1="",0),(A1>TODAY(),A1,A2) to get it to show a 0 if there was no data but this doesn't work.
I am using Excel 2003.
View 4 Replies
View Related
Apr 16, 2014
I have a formula
=AL260-WEEKDAY(AL260,2)+MATCH(AP260,{"Monday","Tuesday","Wednesday","Thursday","Friday","Saturday","Sunday"},0)
The formula looks at the chosen start date (AL260), and then uses a displayed text day (AP20) to display the relvent date to the text day, this works fine however if the start date is say 08/08/14 (a Friday) when the formula detects a Monday (this copies down a range looking at the start date and the text days to produce dates on each line, the formula displays the Monday dates prior to start date, is there any way to alter this to make it display the dates ahead of the chosen start date?
View 10 Replies
View Related
Mar 20, 2014
I'm trying to filter 2 date columns to include only data containing dates within 3 months of today's date.
I see there is a data filter option for "next quarter" but not 100% sure if this covers the quarter from today's date?
View 3 Replies
View Related
Feb 25, 2009
how can you automatic the date to today's date when you open the excel file?
ie.
Price Report For 02/25/09
View 5 Replies
View Related
