Using A Cell Range In An If Statement
Jul 23, 2009
I am trying to do a calculation based on the conditions of two cells but one cell I would need the range of the report. Either way, here is my current statement.
=IF(P2:P15 = "Green Building 15",SUM(COUNTIF(C2:C15,"Over AC")+COUNTIF(C2:C15,"Top Lab AC")),0)
I get a Value# error (though it systematicaly works if you check in the funtion area), and its because of the range I am using, is there anyway to bypass thiss issue or can someone give a better calculation.
View 4 Replies
ADVERTISEMENT
Dec 4, 2009
If C36, C37, C38 or C39 contain a 0 then put 0 if not continue with the the formulae
I have this but I know its not right as this is a sum: =IF(C36:C39=0,0,ROUNDUP((C36/C37)+(C38/C39),0)).
View 4 Replies
View Related
Feb 17, 2012
I am trying to build a macro that test for the value of each cell of a range (in a column), and if found, then the value of the cell of the same row (another column) will be set to 1. If not, then the macro writes a formula to get some data from BBG (this part is ok). this is what I have done so far but I have an error message, telling me "Not Else with out if" .
Code:
Sub Fx()
With Worksheets("DivRelease")
Dim LastLig As Long
[Code].....
View 9 Replies
View Related
Jul 2, 2014
I want to create a simple if statement to search if a value in cell B2 is equal to a value in the range 'CodeCheck'!A1:A92
I have written the code =IF(B2='CODECHECK'!A1:A92,"Y","N")
I am always getting N returned even though I am 100% sure the data in B2 is in the 'CODECHECK'!A1:A92 range.
View 5 Replies
View Related
Mar 16, 2007
1st - Need a macro to change a range of cells colours based on a single cell having a value greater than 0.001. ie. cells A1 - G1 need to change to grey based on cell F1 having a value greater than 0.001 entered in it?
2nd - Also a macro for deleting the text contents of cell C1 based on cell F1 having a value greater than 0.001. Therefor if cell F1 has a number greater than 0.001 it changes the colour of celss A1 - G1 and also deletes the text in cell C1?
View 2 Replies
View Related
Oct 1, 2008
I'm trying to set up an if statement that will recognize that if a cell is FHR it will do something...but if it's PHR it will do something else. I think I found the place where I keep getting an error but I'm not sure how to go about fixing the issue.
View 2 Replies
View Related
Jul 7, 2008
I want to put a range select statement to select a cell and count down 10 cells and copy.
View 9 Replies
View Related
Jan 13, 2007
This is hard for me to articulate, so hopefully someone will understand what I'm trying to do.
I'm attempting to construct a formula in Excel, that basically says: IF the value is between these two numbers, multiple them by this percentage, or if the value is between these numbers, multiple it by this percentage.
So, let's say cell A3 equals 10,000,000, A2 equals 5,000,000 and A1 equals 1,000,000... Also cell B3 equals 10% and B2 equals 5%. We'll say that number X is in cell C1. If the number X is between 10,000,000 & 5,000,000 it should by multiplied by 10%. If number X is between 5,000,000 and 1,000,000 it should be multiplied by 5%.
I've tried a formula similar to: IF(C1 (Rng(A3:A2), C1*B3) ---- Meaning that if the number is between 10,000,000 and 5,000,000, multiple the number by 10%.
View 12 Replies
View Related
Aug 8, 2013
I am trying to loop through a range, checking for a cell to contain one of two characters and then put a value in a cell to the side (well 3 away) of it. Im getting an error for Type mismatch on line:
VB:
If CellContent = "h" Or "v" Then
the data in the cell is an along the lines of '12.34.56.43 som-thi-vh-ng1'
VB:
Dim MyRange, MyCell As Range
Dim CellContent As String
Sheets("Sheet1").Activate
[Code]....
View 1 Replies
View Related
Aug 28, 2009
I have tried over and over to get a point value from the percentages posted below but my formula will not return consistent results. Am I doing something wrong.
94% - below 1 Point
95%-96% 2 Points
97% 3 points
98%-99% 4 Points
0% or 100% 5 Points
Reference Cell is AG2 and is .99 but for some reason I return a 5
=IF(AG2=0,5,IF(AND(AG2>0,AG2<=0.94),1,IF(AND(AG2>=0.95,AG2<=0.96),2,IF(AG2=0.97,3,IF(AND(AG2>=0.98,A G2<=0.99),4,5)))))
View 6 Replies
View Related
Apr 7, 2009
I dont know how to nest and if (if that is the right way to go about it). this is what I have ....
View 10 Replies
View Related
May 2, 2012
Need all numbers in between the ranges set. So if I input for example 8765 then the cell still comes up with 18.
IF Cell E25 is 0-7200, then 12, If cell E25 is 7201-14400,
then 18, if cell E25 is 14401 - 21600, then 22,
if cell E25 is 21601-28800, then 28, if cell E25 is 28801 - 36000, then 34.
View 4 Replies
View Related
Jun 21, 2012
so on sheet 1 i have a list in column b (as below) and in column G I want to put a note "not included" if the cell matches what is in sheet 2:
AAA
BBB
CCC
DDD
EEE
On sheet 2, column A I have a list of items that I want to not include which I want to be able to add/remove/adjust over time. For example:
DDD
EEE
FFF
LLL
I can get it to put in the correct text into sheet 1 with the following but I don't know how to get it to look through all values on sheet 2 and then only enter the "not included" on sheet 1 if it is listed on sheet 2.
So far I have
Sub checksheet()
For Row = 1 To 428
For col = 2 To 256
[Code]....
This only does it for what is written in cell A3 on sheet 2 and does not keep going down the list in sheet 2.
I think I need to define the range better on sheet 2 and ask it to look through that, but im not too sure.
View 4 Replies
View Related
Aug 9, 2007
I was making a simple spreadsheet as I'm taking practice tests for some IT certifications and the spreadsheet I was making was to chart out my progress.
I had a range of scores in some cells and one of the formulas I used so that I didnt have errors in the sheet like div/0 went like the following:
=if(b5:b50="","",sum(b5:b50)) this seemed to work really well for the one section, however I tried to get a little fancy as always and I think I messed something up. Beneath that I tried to separate each practice test with the same sort of formula resulting something like the following:
=if(b30:b40="","",sum(b30:b40)) this however just returned an error #value. I dont understand why the first formula worked and the second didnt. Then again, I'm not really an excel guru, back in college I was really good with it but I dont really remember much.
View 9 Replies
View Related
Aug 10, 2007
I'm trying to create an if statement that have 2 criterias. Here's what I've created:
=IF(COUNT(F2:F4)=('2007Open'!H2:H4),COUNT('2007Open'!B2:B4)=8,'2007Open'!H2:H4)
This statement is returning the #VALUE error.
I guess what I'm trying to do with this statement is to count how many values are not equal to 2007Open!H2:H4 and meets another criteria of 8.
View 9 Replies
View Related
May 19, 2009
I'm trying to create an IF formula that returns the month as text between a certain date range in a different column.
For example
Between the 25-APR-09 and 23-MAY-09 I want to display "May" 24-MAY-09 and 27-JUNE-09 "June"
And so on so forth, the column with the dates in it is in date format.
View 9 Replies
View Related
Mar 21, 2007
I need a formula that will return "true" only if ALL cells in the specified range are not Null (<>""). I'd like to assign a value (% complete) only after all tasks under a phase have been given a completion date.
View 7 Replies
View Related
Jun 11, 2014
I have a sheet with thousands of rows and 45 columns and I need to delete a range of cells (G:Y) if the cell in column V = the cell in column X, and I need to do this by row. I think an if/then statement would work.
View 4 Replies
View Related
Jan 8, 2014
I'm after a formula that will look at a number of cells(that are not in a range) with the word "C" and if they all = "C" then I want the cell to come back with the result "yes" otherwise "no".
View 12 Replies
View Related
Mar 24, 2005
I've created an IF statement with multiple formulas, but I can't seem to
figure out if it is possible to pull the information by a specific date
range. I have sales reps that visit customers on specific dates and I need
my tally sheet to only pull dates within that current week. Does anyone know
if this is possible??
This is what I have so far:
=SUM(IF(sales rep!AB2:AB216=I3,IF(sales rep!$AA$2:$AA$216=I4,IF(sales
rep!P2:P216=I7,IF(sales rep!$N$2:$N$216>=DATEVALUE("3/18/2005"),1,0)))))
If you look above I have it to calculate the date value starting at
03-18-05, but I would like it to only pull that date through the next week.
View 9 Replies
View Related
Nov 24, 2012
I am trying to use cell C6 in my control sheet
Which is this
C:UsersNeilWin7DBTradingETFfiles
And put as a string into SaveAs
wbNew.SaveAs Filename:=Worksheets("Control Sheet").Range("C6") & TickerIndex & "ProSharesNAVRatio" & ".txt", FileFormat:=xlTextWindows
View 3 Replies
View Related
Mar 19, 2014
I'm trying to put together a SumIfs formula to find the total count of procedure codes during a certain time period, for a given market.
I have the Market column, Procedure Code column, Date column, and count of Procedure Codes column.
The range of Procedure Codes I want to total on are in cells C4:F4 and they are:
99307993089930999310
It's fairly straightforward with the dates in the SumIfs as well as markets, but I'm not able to get the range of Procedure codes to work like I want. These 4 codes are just the criteria that will use to pull the totals from, which comes from a much larger dataset.
View 1 Replies
View Related
Nov 22, 2006
I need a script that will search through a selected range of cells and add a simple IF statement.
For simplicity, lets assume the desired range is Q36:Q40. (The range is much larger than that.)
The existing formula is:=IF($Z37="%Sales",Q$9*$Y37,IF($Z37="%BS",Q$78*$Y37,IF($Z37="%YOY",O37*(1+$Y37))))
I would like to keep all existing forumulas, just tack on an IF statement before hand that says if a certain cell (Q2) reads "CoPrep" then do nothing, otherwise use the existing formula. I envision this as =IF(Q2="CoPrep","",IF($Z37="%Sales",Q$9*$Y37,IF($Z37="%BS",Q$78*$Y37,IF($Z37="%YOY",O37*(1+$Y37)))))
FYI, the background to this problem is that I am in the process of making a financial forecasting model that allows for choices of company prepared forecasts, hence "CoPrep", or model forecasts based off of other critera, both of which can be sensitized.
View 9 Replies
View Related
Jun 22, 2014
I want to search the selected range for a variable value (calculated previously in the sub) and if it finds the value I want the sub to do some things. If it's not in the range I want it do something else.
Here is the relevant section for what I have:
[Code] ......
This works and cuts the value I'm looking for if it finds a value in the range. The problem is it's not in the range I don't know how to tell it to follow other instructions. I tried the "iserror" with an in statement, but it said the range was not set. Intellisense isn't working and I don't really know how to use the .find method ...
View 3 Replies
View Related
Aug 27, 2008
I have a Userform which has 2 textboxes. User enter his employee id on textbox1 then enters a valid break time code which are 1,2 and 3 on textbox2. If User typed 1 then first breaktime start time will be pasted on the worksheet. When User returns after break he then enters his employee id again and then type 1 to end his first breaktime, the end time will be pasted on the worksheet. My program works fine however, I am trying to place a code which will prompt the user to end his first break time before entering another valid break code. Kindly check my code below as I am receiving an error message. 'Run-time error 9' Subscript out of range. This thing is driving me nuts. Any advise or can you tweak my coding vba experts.
View 14 Replies
View Related
Oct 11, 2011
I have data that has months in it that are spelled wrong and in different formats etc. I need to be able to search the range of data I have created in a separate table in order to return the correct abbreviation into my spreadsheet. See below:
Need to be able to search this range (A1:E12) and return the corresponding horizontal value in the last column (Jan, Feb, Mar)
JanuaryJanuraryJan-11JanJan
FebruaryFebruraryFeb-11FebFeb
MarchMarchMar-11MarMar
AprilAprilApr-11AprApr
MayMayMay-11MayMay
JuneJuneJun-11JunJun
JulyJulyJul-11JulJul
AugustAugustAug-11AugAug
SeptemberSeptemberSep-11SepSep
OctoberOctoberOct-11OctOct
NovemberNovemberNov-11NovNov
DecemberDecmberDec-11DecDec
I am currently trying this, but its not working! =IF(F2="","",VLOOKUP(F2,Dates!$A$1:$E$12,5,TRUE))
View 9 Replies
View Related
Apr 23, 2009
I have a combobox which is linked to a list of policies which has information to the right of them, upon changing the value in the combobox the subroutine below is activated.
It stores the value of the combobox in a string variable, goes to the list and searches for the cell containing the policy. Upon finding the cell it uses the range offset operation to select the two boxes to the right of the active cell. This is where I get my error 1004 - application or object defined error.
Code
Private Sub cmbSectionName_Change()
Dim mySearch As String
'Assigns combobox contents to mysearch
mySearch = cmbSectionName.Value
'select the range
Application.Goto Reference:="SectionNameList"
View 9 Replies
View Related
Sep 27, 2006
Sub SheetFinder()
Application.MacroOptions Macro:="SheetFinder", _
HasShortCutKey:=True, ShortcutKey:="G"
msg1 = "What sheet would you like to go to?"
msg2 = "I'm sorry, but that sheet could not be found."
On Error Goto NotFound
TryAgain:
prompt1 = InputBox(msg1, , "Template")
If prompt1 = "" Then
End
Else
Sheets(prompt1).Select
End If
End..........
View 9 Replies
View Related
Apr 22, 2009
I am trying to have a cell in sheet "Summary" count the number of cells in column DX of sheet "Analyses" that are greater than 0, provided that the value in column A of "Analyses" corresponds with the value in B8 of sheet "Summary."
(In "Analyses," there are 106 subjects, each taking up 64 rows. So, columns 1-64 correspond to Subject 1, columns 65-128 correspond to subject 2, etc. In column DX, each subject has 64 values that are either 0 or greater than 0. In "Summary," each subject has one row that summarizes the 64 trials. I want a single cell in the "Summary," sheet to reflect the number of times each subject produces a value greater than 0 in column DX of "Analyses.") I tried using this formula, but it did not work correctly:
=COUNTIF(IF(Analyses!$A$1:$A$10000=Summary!B8,Analyses!$DX$1:$DX$10000,""),">0")
(Summary!B8 = 1, so I am trying to calculate the number of values in DX that are greater than 0 only for subject 1.) When I press enter, this yields a value of 384. This is impossible, given that subject 1 only has 64 possibilities of yielding a value greater than 0. Subject 1 has 2 values in column DX that are greater than 0. I tried making this an array formula by pressing Shift+Ctrl+Enter, and that just gives me a #VALUE! error.
View 5 Replies
View Related
Dec 14, 2012
Is it possible to insert a formula or have a calculation performed for the range component when using the countif statement.
I am trying to take the entries in the rows in column B and divide its corresponding row in column A and then count how many meet a certain criteria.
View 1 Replies
View Related
