B - Patient Surname
C - First Surname
D - Postcode
E - Date
F - Results of If Statement (Days Difference)
I am looking to comapre b, c, d with teh previous cells to make sure I am looking at the same person hcen the AND statement. If they all match then if subtracts the latest date (column E) from an ealier date for the same person. If the person is different it will return a 0. If the date is the same ti will return a 0.
I have done this so far - =IF(AND(B2=B1,C2=C1, D2=D1),(E2-E1),0)
What I am struggling to do is if the number of days (E2-E1) is 0-3 then for the result to show the text "Less then 3". If the value is 4 - 7 then to have it read "Less then 7", anything over 7 to read "OVer 7".
This formula is being used in a vacation time spreadsheet. So after each paycheck the if statement is applied and need to calculate the accumulation for that week based on if the person has worked 5 yrs or less. I need to stop the today's date calculation in the if statement after it is used. So that each time the spreadsheet is opened the values are a fixed number not changed based on the current date. However if the if statement is pasted into the next pay week it will calculate based on the actual date.
It is calculating is the following:
C4 = 5yrs Anniversary Date of Hire 3.08= less than 5 yrs 4.62= more than 5 yrs
I am putting together a spreadsheet that needs to perform different calculations based on the information that is plugged in to the spreadsheet. Right now, I have a simple formula for my final product, which is: =G2-E3-F3+C3+D3
But, if the variables change, then I have another cell with this formula: =IF(OR(C4=0,D4=0),"",SUM(G2,H3))
Now, my first problem is that I need to get the information regarding D4 out of the above formula. Someone wrote the formula below to combine the information in cell C3 & D3, so I no longer need the reference to cell D4 in the above formula. How to remove the D4 references without getting an error.
You will notice that the 2nd formula has cell C4. This cell has an IF statement in it. The statement is as follows: =SUM(IF(C3=0.875,D3-0.625,D3))
Basically, what I need to do is to combine the first & second formulas on this page. How to do that.
and i have another place for compile where all the data is summarized
What i want is
If the agent name is example 1 and his mistake is present in raw data and it matches the agent id , date and financial then i want excel to calculate how many " financial " error agent made on that particular date only so that i can assign to another agents too , to get exact data no matter in whichever series that data is inserted in excel.
if i use countif and if all the condition are met it shows me all financial mistakes count and if it shows false it turns to zero . if agent make " financial mistake " on 1st nov and he made another non financial mistake then as it should show only the count of that particular agent " financial mistake " on that date only from the given RANGE DATA
I have a start date, generated onto cell B4 from a user form datepicker control. I also have a course type in cell C4 that course has a constant number of days. I would like to add the number of days of the course to the start date to give me an end date in another column.
Need a formula that will generate the ending date of task, adding therefore if needed the number of weekend(s) in between the start and end date to the End date.
Let us say: task is starting in 2008/11/11 the duration of the task is 7 days. So, we should get an End Date= 2008/11/19.
2008 11/11 11/12 11/13 11/14 11/15 11/16 11/17 11/18 11/19 Tue Wed Thu Fri Sat Sun Mon Tue Wed
How calculation can be made based on the date. I have 2 sheet (MATTER and REPORT). All productions made within sheet MATTER. Then I will produce report to be printed in sheet REPORT. I only include the date and calculation every matter will be automatically made based on date and item.
In cell B6 , I have an amount . and in Cell C6 I have inserted the date at which that amount has been kept . Now what i want is I want the Data from D6 To O6 to calculate as to how many Days that 100000.00 Rs or Dollar have been kept each month . Each month has its own Days like January has 31 Days . So i want each Days to appear accurately. Like for example if i insert the 4-8-2009 from January till August 4-8-2009 , how many days that amount has been kept each month .
i have a date in a field which is under Anticipated Win Date.
The format of this date is '31-Jan-08
the data is then copied over to another sheet which is then cleaned up.
The date format is then put into the following format 19-Dec-07
What i am trying to do is firstly devise a formula which will allow me to minus say todays date from the date entered to see if this date has passed and will the formula work regardless of the format of the date.
I have a report which is usually updated on a Monday based on the previous Fridays closing reports.
In H3 I have the calculation =Today()-3
So this week this would have been 04/06/2007 - 3 days = 01/06/2007
Occasionally due to Bank Holidays etc the update moves to later in the week which messes up all of the tables which are reliant on the date 01/06/2007.
Is there a calculation which will work out the number of days between today and last friday that I could put after =Today() instead of -3, so that if the report was updated say ona Thursday it would automatically calculate Today()-6.
I have a pivot table with a field called "created on" which is a series of dates, i want to create a field called "Days in Pipeline" which would essentially be =TODAY()-'Created On'
This doesn't seem to work, i get an error: Your formula includes a function that cannot be used in PivotTable formulas...
I am prepare budget salary base on actual joining date and budgeted joining date. I can only manage to get the formula by joining month not by joining date
In the above case there are only 5 sets of dates, in some cases there are more and in some cases there are less. Between Min 2 dates - Max 7 dates.
Am looking for a result like : 2,14,13,12
Am not well versed with VBA, hence would prefer a formula. Currently am doing Text to Column and working on the same. And that process is time consuming. Would there be a short cut ?
I have start date(Column A) and an end date(Column B) in two columns and I have found out the difference between them in column C in hh:mm:ss format. I want to find out how many cases are greater than 2 Hrs but less than or equal to 4 Hrs.
I am trying to subtract two dates to find out whether an invoice is 6 months past due (regardless of number of days). I use DATEDIF in my formula and it works fine until now. It seems the function takes number of days into account and won't return the desire result when there are 31 days. I want to find out whether the number of months between two date are greater than or equal to 6 months without considering the number of days. I am attaching a sample worksheet for better explanation. As you can see, October is not working right.
I am attaching an Excel file where I am trying to calculate lead time (even if a negative number of days) to a next activity based on projected dates based on a 'cycle start date'. I am trying to perform this with e complicated IIF statement which you can see from the attached file.
Note: this file is created from a vb.net application at runtime where this excel file is actually an xlt template. I attached it as an xls to make it easier to look at. EDIT: I have a flag in the Annual/Semi-Annual that blanks out cells that are not needed if Annual. It causes my LeadTime Col. to blow chunks and I can't seem to get past an error in the formula since adding this.
=If(F3>=NOW(),F3-NOW(),If(G3>=NOW(),G3-NOW(),If(H3>=NOW(),H3-NOW(),If(I3>=NOW(),I3-NOW(),If(J3>=NOW(),J3-NOW(),"CycleStart Null"))))). Replaced Zip file
I am looking for a single formula I can run along a single row that looks at several columns of data, and then checks if the date range falls between the running row, take it's relevant number, and multiply it by a single rate. The attached probably explains it clearly - I think the solution would be some sort of Sumproduct, but my attempts have failed!Example - Date Range with Calculation.xlsx
A B C D Date ReceivedApproved DateDenied DateTurn Time 1/1/14 1/13/14 9
Turntime is calculated with this formula: =IF(A4<>"",IF(COUNT(B3,C3),NETWORKDAYS(A3,IF(B3<>"",B3,C3)),""),"")
What I need is to not count the first day it is received in the calculation for the Turn Time. So in this instance I need the Turn Time to say 8 instead of 9. If I just subtract a 1 then I get an error if the Approved Date or the Denied Date are not filled in yet.
I have three columns named "name","start_date" and "end_date"
ex:
Name start_date end_date AB 9/11/13 10:19 AM ?? CD 9/12/13 11:45 AM ??
All i need to find is,
If Name = AB, i want put start_date+3 days in the end_date column, similarly for name = CD , start_date+7 days.
But the calculation should exculde weekends(sat and sun).
ex: For AB, start_date = 10/3/13 (3rd oct , thrusday), end_date should be start_date+3 ,so end_date = 10/6/13 but 6th october is sunday so the formula should give end_date as 10/7/13.
I have a worksheet that contains investment security purchases, including purchase date, purchase amount and maturity date, each in its own row. I need to develop a formula that will sum the purchase amount based upon the term in days (maturity date - purchase date) of the investment. The respective rows do not contain the term in days so the formula will need to calculate the days to determine the aggregating criteria described below.
One cell should contain the aggregate security purchase amount whose term is 1-90 days and another cell should contain the aggregate security purchase amount whose term is over 90 days. It seems that SUMPRODUCT with a condition is the best way to handle this; however, I cannot get the correct syntax of this formula.
Short Version: I need to find a way to have the date in a cell be used for both a calculation (one date subtracted from another) AND a conditional format (Cell changes color based on the month). Cell format is mm/dd/yy
Explanation: We enter information for each work order on a row in our Master Work Order List. For each new work order we start a new row at the bottom of the sheet.
We calculate each work order's throughput time by having a formula in column F that subtracts the Start Date in column D from the Complete Date in column E.
F#=E#-D#
All date values are entered as mm/dd/yy and the cell format is mm/dd/yy.
At the end of the month, we put an AVERAGE formula into a cell in column H and, for the sources, use all cells in column F that represent work orders that were completed for THAT month. The problem is not all work orders complete in the order they started and some can start in one month but not complete until 2 months later, so we can't just click-drag a bunch of cells in a column. Sorting doesn't work because after we click and drag a bunch of cells and get the average, when we re-sort back to Sort by Work Order Number, the clicked-cells don't move, but the data does.
We end up just looking up and down column E looking for dates from this month and hope we got them all.
So I thought, "Hey, I know, I'll put conditional formats into column F so that if the date in column E starts with 01 (January), the cell in column F will turn Red, and if it's 02 (February), the cell will turn Orange and so on through the end of the year! That way we could just look for a given color each month and are MUCH less likely to get it wrong!
I added conditional formatting using the LEFT(E#,2) formula, hit [Enter] and... nothing.
I thought, "I"ll set the cell formats to TEXT so the LEFT formula 'sees' the month number!"
So I set the cell formats to TEXT and then the conditional format 'sees' the '01' for January and changes color!!
But now the Throughput Time formula (=E#-D#) doesn't work.
I think it's because Excel can DISPLAY a date as mm/dd/yy (due to Date Format), but it actually calculates date information based on a number that REPRESENTS the mm/dd/yy. I read that Excel 'sees' each date as a number representing time passing, not as "mm/dd/yy" and uses that number for calculations.
SO, is there a way to have a cell's date be 'calculatable' and still have it change color based on the month?
I have some data A2:A1000 where there is a start date in column D and end date in column E (formatted DDMMMYYYY). In column F I have a formula that calculates the NETWORKDAYS between the dates.
What I want is a set of formulae that will look in column D for a date between 01/01/2013 and 31/01/2013 (or any date I specify) and find the 'MIN', 'MAX' and 'AVG' of the values in column F where the date in column D matches my criteria.
What I can't figure out is how to offset from the cells matching the date range!?
How can I have an if statement or other type of formula look at a date and add 26 months and determine if it's 26 months old yet.
example assuming that November 4, 2005 is one day from being 26 months as of today That cell next to it would say "Available" Then the next it would say "Retired" because it hit the 26 month old period.
