1- Open enclosed file.
2- Run Macro1.
3- Wait some time completing running Macro1.
4- Run Macro2.
5- Wait some time completing running Macro2.
6- Look MessageBox to see that what is Macro2 running time. (Note: My Macro2 running time is 06 minutes and 49 seconds)
My question is how can I decrease Macro2 running time ?
I am open all ideas like copy data to NotePad and paste again excel etc.
I am trying to develop a macro that allows the user to copy and paste a set of date and time values, move them to the next sheet and increase the month by 1. I need help trying to find out how can I create a counter for the program to keep running without the need to reprogram the macros again.
View 14 Replies View RelatedI was unable to get a loop to reliably run my analysis, and I have locked in specific cells that cannot change, and anything unlocked will need to copy/paste from the row below. I will need this to continue this loop until the dates from the Range B8-B1500 end (Output Tab).
[Code] .....
The code opens a varying workbook with the same format as the source workbook and copies specific columns into the source workbook.
It is currently taking about 20seconds to run.
The worksheets are protected and have merged cells hence the call TestMe line.
I have my macro that every second does a copy and paste.
but window doesn't copy and paste anything else but the macro's value
is it normal?
In this sheet are 2 Splash screens which randomly open on startup. This is the code for them:
View 12 Replies View RelatedI have a cell with both date & time "10/9/09 3:15" This is put in the current cell by formula which indexes two dif. cells, Now I am trying to copy this cell and paste into another book but like to have only date. How can I do that? Each time I try it gives me the time value in the pasted cell and I cannot even format it.
View 5 Replies View RelatedSheet linked from external file, new data coming daily. How to copy Values of cells from B4 till B-empty to C column? The attached file has a properly displayed data.
View 3 Replies View RelatedI am having difficulty finding information on coding my spin button on a user form. I searched and haven't found any information. I need to do is code a spin button to increase or decrease by 1 each time it is clicked up or down. I would like it to populate to a text box on my form if that is possible.
View 3 Replies View RelatedAttached is my code, pay attention to the bold part. I want the sourceSheet to be copied as a sheet and pasted in the targetSheet (the Sheet2 of "NewBook") but I want it pasted asvalues. Here is the specific part which needs to be looked at...and below is the full code.
VB:
Set sourceBook = Application.Workbooks.Open(sourceFilename)
Set sourceSheet = sourceBook.Sheets("Current")
Set targetSheet = NewBook.Sheets("Sheet2")
[Code].....
I have a single simple question, so let's get straight to the point: I have an A column with these values:
I:::I::::::A::::::I::::::B:::::....
I==================== ....
I 1 I____40____I_________ ....
I 2 I____50____I_________.....
I 3 I____30____I_________.....
And I need each of these values increased/decreased by a constant number.
So far, I only found formulas where all cells are, say, added into a single result, as you can see here:.....
Looking for a code to do the following:
If rows 1 through 20 are unlocked and rows 21 to end are Locked
I want to use a Command Button to automatically
> Insert a new row (after row 20 and not before)
> Copy row 20 (which is already formatted)
> Paste row 20 onto the newly inserted row with all formats
I'm trying to develop a simple time / acitivity capture sheet for a time and motions study. I have a sheet called "Front" with a project number in C2, an activity drop down in C4 and a comments section in C6.
I need to paste these into sheet "Database" into the first blank cell in B:B for C2, C:C for C4 then stamp the date in the same row in D:D and the time in E:E.
So I've made a large spread sheet in Excel that calculates many values and constraints for the optimization of a structural beam; from there, the minimum value that satisfies all constraints is output in an individual cell. I want to see how this output value changes when I change one value, the length of the beam. For instance, I input a length of the beam (10 ft.) and I get an output value of 643.50; I copy and special paste this value manually into a cell. I then change the length to 15 ft. and get an output value of 1322.83 and copy and special paste this value into the next cell. This process is very tedious, because I have to do this for hundreds of values. Is there a way to automate this so that I don't have to do everything by hand. The tricky part is that every time I change the length, the entire worksheet must recalculate before I get a new output value.
View 1 Replies View RelatedI am attempting to copy a range from one worksheet and paste it to a new worksheet when the system clock hits a specific time. It needs to run continuously and identify that a previous colum has been filled and paste into the next open column. I am just getting my feet wet. I have some code to begin with but I am getting a 1004 error.
'Application. ScreenUpdating = False
Sheets("mysheet").Select
Range("E3:E10").Select
Selection.Copy
Sheets("CmyOtherSheet").Select
Range("B1:B8").Select
ActiveSheet.PasteSpecial xlPasteValues
'rTime = TimeValue("12:31:00")
'Application .OnTime rTime, "RunThisProcedure"
I would like to have a macro, to copy the cells and paste it 6 times in a column. below are the format required.
Column A
Input
abc
ert
uty
Column B
Output
abc
ert
uty
abc
ert
uty
[Code] ......
Here is what I am trying to do in lay terms:
If A2 and B2 on Sheet("Master") are not highlighted, copy and paste them into Cell A3 and B3 on Sheet("Job List - Numeric"). Do this up to Row 50 on Sheet("Job List - Numeric"). Once Row 50 is filled, jump to pasting to D3 and E3 on Sheet("Job List - Numeric") and continue up to Row 50 and so on....
I need to do this on one sheet in numerical order based upon Column A and another sheet in alphabetical order based upon Column B.
Here is what I have in code so far:
Sub Final()
Application.ScreenUpdating = False
Dim c As Integer
Dim x As Integer
For Row = 2 To 145
Range(ActiveCell, Cells(ActiveCell.Row, ActiveCell.Column + 1)).Select
[Code] .......
By using a macro on the attached report I like to copy the row values named "Section Total" in red and and paste them over the values starting with "Aged Debt" in blue (the rest of the wording cahanges every month so "Aged Debt" is the key word for that row).
View 1 Replies View RelatedHow can i use this code to make it working also on a range filtered
Sub CopyPasteValues()
Selection.Copy
Selection.PasteSpecial Paste:=xlPasteValues
End Sub
How do I tell VB to copy the values from whole row on one worksheet to the row with the active cell on another worksheet?
View 3 Replies View RelatedI paste cell information into cells already formatted to have certain colored backgrounds, ect. However, upon pasting the cell format from the copied cell is obviously applied.
Is there a way of locking the cell formatting so that I can paste information from a different cell, but the font/bground colors stay the same?
how to include a line of code, to start a sub running at a selected time? Given that the workbook is already opened before that time?
View 6 Replies View RelatedHow do I adjust this formula so it copies & paste special values rather than copying formatting etc? I am very new to this and I have looked at other examples but have found it hard to adjust my code using those examples.
VB:
Sub PrepayjournalKW()
'
' PrepayjournalKW Macro
'
Range("A6", Range("A" & Rows.Count).End(xlUp)).Copy Destination:=Sheets("Journal").Range("A1")
Range("B6", Range("B" & Rows.Count).End(xlUp)).Copy Destination:=Sheets("Journal").Range("C1")
Range("AB6", Range("AB" & Rows.Count).End(xlUp)).Copy Destination:=Sheets("Journal").Range("D1")
Range("AF6", Range("AB" & Rows.Count).End(xlUp)).Copy Destination:=Sheets("Journal").Range("E1")
End Sub
I am trying to create a macro to automatically copy and paste values from column M into column N.
Column M is a Concatenated formula, and I want people to be able to copy the result easily without having to do any copy+"paste values" themselves.
So I have the following:
Sub CopyFormulaResults()
Application.OnTime Now() + TimeValue("00:00:01"), "CopyFormulaResults"
Range("M3:M1000").Select
[Code]....
However, the macro only runs when I run the macro, not automatically every second like I want it too.
I have basic values in sheet named 'Basic"
i have aggregate values in sheet named "Aggregate"
The values shown in B5:D5 in sheet basic is an outcome of a formula.I want this values to be copied to E3:G3 in sheet named aggregate.
likewise the values shown in B11:D11 in sheet Basic to be copied to E4:G4 in sheet aggregate.
i can do this manually by copy and paste special-values.
But is there any way to done it automatically by excel?
we have numbers in cells at positive and nigative values, how can we copy and paste in absolute values
View 2 Replies View RelatedI'm downloading a tone of financial data from a database and without fail there are always a few odd numbers over time that are either wrong or that I want to through out of my charts/analysis. But I don't want to change them directly in the sheet that I use the code to download straight from the database since I can just click update and the codes refresh the latest data into the format I need. Basically once I hit refresh and download the data into the coded worksheet template I want a macro that lets me pick a tab or multiple tabs and copy and past special value the data into a new worksheet where I can manipulate the data without screwing up the code.
View 3 Replies View RelatedI'm getting better with Excel and have gotten pretty good with formulas, but my VB/Macro understanding is limited, if not non-existent!
What I need is to assign a macro to a button so that when executed, it copies the entire sheet and pastes all as values.
Tried all day to find a way of selecting text ( from several cells) on one sheet and then having it pasted into the textbox on another sheet. I did originally paste the text to a cell but it makes the row's vary in size depending on the copied text and gets a bit annoying. Seems to be This is the paste to Cell code
View 4 Replies View RelatedI need to automatically copy cell IR18 value to cell JT18. I've been searching the forum for some code and I came up with something that only partially works for me:
View 10 Replies View Related
