Automatic Copy / Paste Of One Output At A Time
Aug 19, 2013
So I've made a large spread sheet in Excel that calculates many values and constraints for the optimization of a structural beam; from there, the minimum value that satisfies all constraints is output in an individual cell. I want to see how this output value changes when I change one value, the length of the beam. For instance, I input a length of the beam (10 ft.) and I get an output value of 643.50; I copy and special paste this value manually into a cell. I then change the length to 15 ft. and get an output value of 1322.83 and copy and special paste this value into the next cell. This process is very tedious, because I have to do this for hundreds of values. Is there a way to automate this so that I don't have to do everything by hand. The tricky part is that every time I change the length, the entire worksheet must recalculate before I get a new output value.
View 1 Replies
ADVERTISEMENT
Mar 13, 2009
I would like Excel to do the following and have no idea how to write the instructions. The function is as follows:
From a general information sheet (sheet #1), XCEL looks at a cell to determine if that cell holds "A" or "B" (will be a word, and choice will be previously fixed by a dropdown menu). It then looks at another cell in the same row to determine if it equals 0 or 1.
If the cell holds A, and the other cell holds 0, XCEL copies the row from the general information sheet onto sheet #2 of the same workbook.
If the cell holds B and the other cell holds 0, XCEL copies the row from the general information sheet onto sheet #3 of the same workbook.
After XCEL has copied a row, it inputs a 1 in a final cell of that row so it will not copy that row again.
On sheet #2 and sheet #3, XCEL begins (and copies to) the first open row in column A (by moving there after performing its last copy function or by checking column A until it finds a cell = 0), so that each new copy function begins in an open row.
View 12 Replies
View Related
Feb 18, 2014
I have data from (row 1, column 1) to (row 53, column 5) on 283 consecutive worksheets in a singular excel file that I would like to be presented on a singular worksheet starting from the data on worksheet 1 and descending to the data on worksheet 283.
I am looking for a copy and paste loop solution that will copy the data from each page and sequentially paste the results on a singular output page in descending order (worksheet 1 data, worksheet 2 data... etc) so that I can sort the data.
View 1 Replies
View Related
Oct 12, 2009
I have a cell with both date & time "10/9/09 3:15" This is put in the current cell by formula which indexes two dif. cells, Now I am trying to copy this cell and paste into another book but like to have only date. How can I do that? Each time I try it gives me the time value in the pasted cell and I cannot even format it.
View 5 Replies
View Related
Jan 28, 2009
Looking for a code to do the following:
If rows 1 through 20 are unlocked and rows 21 to end are Locked
I want to use a Command Button to automatically
> Insert a new row (after row 20 and not before)
> Copy row 20 (which is already formatted)
> Paste row 20 onto the newly inserted row with all formats
View 11 Replies
View Related
Dec 5, 2011
I'm trying to develop a simple time / acitivity capture sheet for a time and motions study. I have a sheet called "Front" with a project number in C2, an activity drop down in C4 and a comments section in C6.
I need to paste these into sheet "Database" into the first blank cell in B:B for C2, C:C for C4 then stamp the date in the same row in D:D and the time in E:E.
View 5 Replies
View Related
Nov 29, 2007
I am attempting to copy a range from one worksheet and paste it to a new worksheet when the system clock hits a specific time. It needs to run continuously and identify that a previous colum has been filled and paste into the next open column. I am just getting my feet wet. I have some code to begin with but I am getting a 1004 error.
'Application. ScreenUpdating = False
Sheets("mysheet").Select
Range("E3:E10").Select
Selection.Copy
Sheets("CmyOtherSheet").Select
Range("B1:B8").Select
ActiveSheet.PasteSpecial xlPasteValues
'rTime = TimeValue("12:31:00")
'Application .OnTime rTime, "RunThisProcedure"
View 4 Replies
View Related
Sep 18, 2009
I am trying to develop a macro that allows the user to copy and paste a set of date and time values, move them to the next sheet and increase the month by 1. I need help trying to find out how can I create a counter for the program to keep running without the need to reprogram the macros again.
View 14 Replies
View Related
Aug 20, 2014
1- Open enclosed file.
2- Run Macro1.
3- Wait some time completing running Macro1.
4- Run Macro2.
5- Wait some time completing running Macro2.
6- Look MessageBox to see that what is Macro2 running time. (Note: My Macro2 running time is 06 minutes and 49 seconds)
My question is how can I decrease Macro2 running time ?
I am open all ideas like copy data to NotePad and paste again excel etc.
View 3 Replies
View Related
Jul 31, 2012
I would like to have a macro, to copy the cells and paste it 6 times in a column. below are the format required.
Column A
Input
abc
ert
uty
Column B
Output
abc
ert
uty
abc
ert
uty
[Code] ......
View 2 Replies
View Related
Jun 27, 2013
Here is what I am trying to do in lay terms:
If A2 and B2 on Sheet("Master") are not highlighted, copy and paste them into Cell A3 and B3 on Sheet("Job List - Numeric"). Do this up to Row 50 on Sheet("Job List - Numeric"). Once Row 50 is filled, jump to pasting to D3 and E3 on Sheet("Job List - Numeric") and continue up to Row 50 and so on....
I need to do this on one sheet in numerical order based upon Column A and another sheet in alphabetical order based upon Column B.
Here is what I have in code so far:
Sub Final()
Application.ScreenUpdating = False
Dim c As Integer
Dim x As Integer
For Row = 2 To 145
Range(ActiveCell, Cells(ActiveCell.Row, ActiveCell.Column + 1)).Select
[Code] .......
View 3 Replies
View Related
Jul 18, 2013
for example i have two work books where i need to compare the times, such as i need to see where does 10:26 am lies and after comparing it on workbook2 we need to return the data in a,b,c blocks infornt of 10:26am, i have tried IF(AND()) but i was not able to rationalise it for huge and random data.
Workbook1:
7/13/2013 10:26
7/13/2013 10:58
7/13/2013 12:06
7/13/2013 12:17
7/13/2013 12:29
7/13/2013 12:29
7/13/2013 12:37
7/13/2013 13:21
7/13/2013 14:24
Workbook2:
9:58:27abcassigned
11:45:09abcreleased
11:49:00ghiassigned
15:14:40ghireleased
15:25:57mnoassigned
Outout should be:
7/13/2013 10:26 a bc
7/13/2013 10:58 a bc
7/13/2013 12:06g hi
7/13/2013 12:17g hi
7/13/2013 12:29g hi
7/13/2013 12:29g h i
7/13/2013 12:37ghi
7/13/2013 13:21ghi
7/13/2013 14:24ghi
View 2 Replies
View Related
Mar 26, 2009
I was curious if there is any way to have time automatically tracked in excel. I will have a few colums, first will be the time, second will be notes, when a note is inputed is there a function available to automatically fill in the time?
View 2 Replies
View Related
May 12, 2008
I can input the date and time automatically in the worksheet while a enter a number in the 3 column but when ever i enter number in the next cell whole time is changing in all the cell and it showing the same time for every number in the entering and not different time in the columns
View 9 Replies
View Related
Feb 14, 2014
i am trying to make one cell automatically change to current date and time when the cell next to it has changed value. ive search other posts but cannot figure this out. so if cell A1 changes value cell B1 should automatically fill with current date and time cell A1 changed value.
View 9 Replies
View Related
Oct 13, 2011
I have a time tracking sheet. In Column C and Column D there is a start time and end time respectively where my team people will enter the current time accordingly.
I would like to lock the cell once they enter the time but the entire sheet should not lock. Only the Column C and D should lock upon people enter the time. Basically, once user enter the time, they should not be able to change it.
View 5 Replies
View Related
Jan 12, 2012
How can I get an automatic time & date entry into cell B1 based on a alphanumeric entry in cell A1. The time and date must not re-calculate every time the workbook is opened.
View 4 Replies
View Related
Mar 29, 2009
I'm using 2003.
1. Copy cells B5 to V-First blank row in Strength Tests worksheet
2. Paste cells into Racks worksheet in cell C5
3. Change font size to 6
4. Sort by Column T descending then by Column C ascending
5. Copy one row (A5-W5 (1Rx23C)) from Racks worksheet
6. Paste row into M1 worksheet in cell D4
7. Print M1
8. Drop down one row on the Racks worksheet
9. Repeat steps 5-8 until there's a blank row.
View 9 Replies
View Related
Mar 10, 2009
How can I have a form field automatically fill some aspects of the data that's input? I've seen it before, like a phone# field automatically including the dashes.
I would like to automatically include colons in a time field. So if I were to type "081500" (or even "81500"), it would complete it as "08:15:00".
View 11 Replies
View Related
Jan 15, 2010
Is there a way to automate the date and time in one cell upon saving? I have seen some posts elsewhere upon this subject, but here is the twist:
this is a shared workbook with each tab allocated for a different person. Each person needs to update their worksheet and have the date and time update upon saving. The date and time would appear in the same cell for each sheet. I am fairly certain that this cannot be done with an Excel formula, so I would appreciate if anybody had any VBA suggestions. (I am just starting to learn VBA
View 9 Replies
View Related
Feb 2, 2007
Need Macro to automatically printout my worksheets daily at a specifi time?
View 9 Replies
View Related
Feb 13, 2010
I would like a solution for the automatic calculation of the end date and end time for project tasks. I have already spent hours on the issue, thanks for any help on this.
The parameters are:
A1 = Start time 08:00
B1 = End Time 17:00
A2 = break lunch 12:00
B2 = back from lunch 13:00
Task parameters
A5 = start date 01/03/10 (entered manually)
B5 = start time 10:00 (entered manually)
C5 = duration 02:00 (hrs entered manually)
D5 = "end date" >>> (to be calculated exluding breaks and holidays)
E5 = "end time" >>> (to be calculated exluding breaks and holidays)
the next line should be filled in automaitically according to the hours needed and the previous end date & time
A6 = "start date" >>> (after line 5: to be calculated exluding breaks and holidays)
B6 = "start time" (after line 5: to be calculated exluding breaks and holidays)
C6 = duration 14:00 (entered manually)
D6 = "end date" >>> (to be calculated exluding breaks and holidays)
E6 = "end time" >>> (to be calculated exluding breaks and holidays)
and so on for every new line down.
View 9 Replies
View Related
Jan 4, 2014
Please find attached a daily copy of a spreadsheet that is used to monitor train running times.
The columns on the left - "Serv No, Serv Start Date,Train No:, Scheduled Arrival, Scheduled Depart" are provided to us automatically and the underlying cell formatting/formula cannot be changed. This information is cut directly from a daily report sent to us the previous day. The cell formatting for the start date is custom - dd-mm-yyyy hh:mm.
The sheet is usually locked out with user access only to the left hand side to cut and paste train times in and the input columns on the right hand side. User has no requirement to adjust any details in the left had column apart from to add additional trains at the bottom is need be. I have left the loaded sheet blank and complete with all underlying cell formatting, conditional formatting and formulas intact for you to play with.
Both sheets essentially do the same thing so whatever formula changes are made to the empty sheet can be adapted for the loaded sheet.
For simplicity, I will focus on the empty sheet. What I am mucking around with is having the user input the train arrival time in the "Actual Arrival" column - (column F)
What I am looking at then making occur is the spreadsheet automatically filling the adjacent columns with the appropriate text and calculations.
To do this excel needs to compare column the number (cell input is text formatted) as a number with the arrival time in column G. It then needs to calculate if the train is Early (16 minutes or more before scheduled arrival), on time (+/- 15 minutes either side of scheduled arrival) or late (16 minutes or more after scheduled). It then needs to automatically place the letter "E", "O" or "L" in column K and the time differential in column L.
My problem is two fold.
Firstly, I cannot seem to make the spreadsheet automatically enter a letter into column K depending on the above conditions.
Secondly, I have had limited success in having the spreadsheet compare column J with column F and working out the differential. However, this only works if the time remains linear. IE only if the train runs on time or late. It gives an incorrect time differential if the train is early. I will attach this spreadsheet tomorrow as an add on to this post.
DAILY TRAIN RUNNING.xlsx
View 3 Replies
View Related
Aug 26, 2013
I need to copy all sheets from a workbook to a another workbook (create a copy of the one I am using) and this is the cod I have:
Sub NewReport()
Dim Workbook1 As Workbook
Dim Workbook2 As Workbook
With Application
.ScreenUpdating = False
.DisplayAlerts = False
.EnableEvents = False
End With
[code].....
The problem I have is that the output only have the sheet1!
I am using Excel 2010
View 4 Replies
View Related
Mar 20, 2008
For what I'd like to do, the attached workbook actually represents 3 worksheet. one input sheet and two output sheets (output1 and output2)
I plan to use command button " CommandButton1" on input sheet to start the calculations
Here's what I want to do after pressing the " CommandButton1" :
1. start with case 1 and find the value of Input A to Input J from input table using Vlookup and paste those values to respective palceholder for inputs in blue colour area above the input table for each input.
2.for empty cell in the input table paste 0 (zero)
3. after this will give results for case 1 inputs on sheets "output1" and "output2" on basis of formulas used for each output
4.then copy the results for case 1 inputs from sheet "output1" and "output2" and paste them on "input sheet " in Output table (its below Input Table) next to case1
5.Do this for all cases (in actual workbook there will be more than 100 cases)
View 9 Replies
View Related
Aug 9, 2013
I am trying to make some sheets with football teams from one championship and their results. For example i will have a match between TeamA vs. TeamB that will end 0-0. I will enter this value in the sheet for the TeamA results but normally this value will also be found in the results sheet of TeamB.
My question is, how can i make excel copy this value once i enter it for TeamA in the results sheet for TeamB.
View 2 Replies
View Related
Feb 3, 2012
This macro works fine on my machine but not with other users:
This should copy/paste certain cells then paste 3 sheets into a new work book.
ON other computers it seems to paste in a picture? works OK for me?
Sub ValidationTests()
'
' ValidationTests Macro
' Macro recorded 21/12/2011 by '
'
Sheets("Score Sheet").Select
Range("A8:M18").Select
Range("H18").Activate
Selection.Copy
[Code] ..........
View 1 Replies
View Related
Nov 28, 2012
From a large set of process data, I would like to copy those instances where there is indeed a measurement available to a different sheet automatically.
The original data looks like this:
Time Temperature
02-Jan-2010 11:41:50 156.1
02-Jan-2010 11:42:50
02-Jan-2010 11:43:50
02-Jan-2010 11:44:50 157.3
02-Jan-2010 11:45:50
02-Jan-2010 11:46:50 156.8
02-Jan-2010 11:47:50 156.4
02-Jan-2010 11:49:50
02-Jan-2010 11:50:50 157.2
The resulting data shoot look like this (in a different sheet):
Time Temperature
02-Jan-2010 11:41:50 156.1
02-Jan-2010 11:44:50 157.3
02-Jan-2010 11:46:50 156.8
02-Jan-2010 11:47:50 156.4
02-Jan-2010 11:50:50 157.2
I have actually been learning quite a few tricks on my own since I started this data analysis project but I believe this requires some experience with macros, which I really don't have.
View 2 Replies
View Related
Jan 29, 2014
I would like to implement specific cell ranges from two specific worksheets each within 33 workbooks (which all have several tabs) into a summary page in a separate workbook.
The cell ranges are going across my spreadsheet in rows and I would like for them to transpose into a columns depending on the data which I have separated by catergory on the summary page. They are all on the same location in each workbook which is separated by country. The cell ranges are E26:P37 and I would like to transpose them and have them put below eachother without overwriting for my format on the summary page, how I can put this together in a macro?
View 1 Replies
View Related
Jun 20, 2013
Attached is my code, pay attention to the bold part. I want the sourceSheet to be copied as a sheet and pasted in the targetSheet (the Sheet2 of "NewBook") but I want it pasted asvalues. Here is the specific part which needs to be looked at...and below is the full code.
VB:
Set sourceBook = Application.Workbooks.Open(sourceFilename)
Set sourceSheet = sourceBook.Sheets("Current")
Set targetSheet = NewBook.Sheets("Sheet2")
[Code].....
View 9 Replies
View Related
