Define Range Object Based On Cells Not Null

May 20, 2006

The problem that I am having today is defining a range object that cannot include null cells. If it does include Null cells then the filterwill fail. the cells that I need to define are all in a cohesive unit. the other thing to know is that the cells that are not null will never be mixed in with cells that are null. so for instance you might have a range of cells from one to 100, the first 50 might be full. the last 50 would all be null. in that situation I would need to loop through those cells to define a range object that would just see the first 50 cells ....

View 6 Replies

Possible To Define Range For Combobox Input Based On Number Of Non-blank Cells?

Nov 25, 2013

Rather than having to give it a range, I'd like to have a generic range giving me room to add or subtract values in the column without changing this statement.

Code:

Worksheets("Sheet1").Shapes("Combobox2").ControlFormat.ListFillRange = _
"O2:O14"

View 3 Replies View Related

Define Percentage Based On Value Range?

Nov 27, 2013

I need to be able to work out a percentage based on a value range. ie.

Cell D2 to D5 will define the percentages (so I can adjust it and play)

D2 = 18%
D3 = 15%
D4 = 13%
D5 = 10%

I need to work out:

If the value in cell A10 is between 11 and 200 calculate on D2, if between 201 - 500 calculate on D3, if between 501 - 2000 calculate on D4 ect ect

Cells A10 to A100 will have some figures put in them.I then want to calculate the %value used based on weather the figure in one of the A10 to A100 cells falls in a range. The data being put into the cells in column A will vary from report to report.

I'm trying to automate the calculations :

View 6 Replies View Related

Define Range Based On Named Row And Column

Jul 26, 2006

I would like to name a range based on a row number and a column number. I have found the row and column number using this code, but I can't seem to get the rest right.

Sub LastRowCol()
Dim intLastRow As Integer
Dim intLastCol As Integer
Dim ws As Worksheet

For Each ws In Worksheets

intLastRow = ws.Cells.SpecialCells(xlCellTypeLastCell).Row
intLastCol = ws.Cells.SpecialCells(xlCellTypeLastCell).Column

View 3 Replies View Related

Define A Range For SumProduct Function Based On An If Statement?

May 31, 2006

I want to calculate a weighted average but I need it to only calculate on the months to date. I have a data validation drop down on a title page that is toggled to the current month each time a report is needed to define what months have actuals. I bring in data for all the months but only the current months have actuals. I need to calculate the weighted average on ONLY the ACTUALS. How can I set the ranges for sum product based on the data validation list on the title page?

View 4 Replies View Related

Define Range By Selected Cells

Jul 19, 2014

I am working on some code to copy data from one sheet to another, but I'm not sure if I'm going about defining the copy range correctly. I would like it so that the user can highlight a range of cells on the sheet between A3 and F last row (last row based on col C). However the user should be able to highlight rows in any column between A and F, and they could highly the records with just one column or multiple columns. It should take the row numbers of the highlighted range and use the that as the row number to extract the data from.

[Code] ........

Im currently getting runtime error 13 on 'CopyRange = Selection.Rows'

'CopyRange = Selection.Row' returns the single row number for the first cell in the selection, but i need the range of all the rows in the selection.

View 6 Replies View Related

Range Object To Essentially Select An Area Of Cells Whose Contents I Want Cleared

Jun 29, 2006

I'm having a problem in a single line of code in which I'm using a Range Object to essentially select an area of cells whose contents I want cleared.

Here is the
Sheets(Left(c.Value, Len(c.Value) - 1)).Range(Cells(4, 2), " &:& ", Cells(Rows.Count, "b").End(xlUp).Offset(0, 9).Select).ClearContents

I want the range part to evaluate as (b4:whatever the last cell is before the first blank row).

View 9 Replies View Related

How To Reference Cells Value To Define Range Reference

Jul 14, 2014

Is it possible to reference a cells value to define a range reference?

[Code] ......

I am trying to define the row value in the range reference with a value in a secondary cell?

View 3 Replies View Related

VBA - For Null Values In A Range?

Oct 6, 2011

In the following range:

Code:
.Range("C13", .Range("C13").End(xlDown))
For column G, I want to put "N/A" into blank cells.

Like this:
Column CColumn GFIC0021FIC0012FIC0063FIC003N/AFIC0341

View 9 Replies View Related

If Statement, All In Range Are Not Null

Mar 21, 2007

I need a formula that will return "true" only if ALL cells in the specified range are not Null (<>""). I'd like to assign a value (% complete) only after all tasks under a phase have been given a completion date.

View 7 Replies View Related

VBA Excel - Change Null Value In Any Cell In A Range To Zero

Jul 31, 2012

In Excel I want to use a marco to automate a process so that for all the cells in a Range, if any cell is null, it changes to value 0. How can I achieve that?

View 1 Replies View Related

Determine If Named Range Is Empty / Null

Dec 1, 2008

This will probably turn out to be a really quick one: I've got some named ranges I'm working with that in of themselves use Offset to automatically expand a list.

View 7 Replies View Related

Counting Cells That Are Not NULL

Aug 25, 2009

I have a large number of customers listed in an excel sheet that may recieve a visit from my organisation. The reason for the visit may vary and sometimes a customer may recieve more than one visit. Each Row (or record) maps to a customer. Each column has a visit type which I insert a date in to say when the customer has been visited.

I am looking for a function that will return if a customer has been visited or not. As dates can be summed like numbers I am currently saying in the "Visits Recieved" column =if(sum of dates (visit type colunm) >0, 1,0) Then I simply sum the column to get my answer of how many csutomers have been visited.

View 2 Replies View Related

Check First 2 Cells Of The Last Row Is Null Or Not

Jan 19, 2009

In a column "V", when the user enter "Y", i need to copy the entire row to another sheet("Written-off"), its working fine.Sometimes the first 2 columns of that entire row where the user enter "Y" may be null, so using my code, copy first entire row where user put "Y" and paste to another sheet("Written-off"), then user also enter "Y" to wherever in "V" column, this time the entire row should overwrite the last row in the "Written-off" sheet.

I found the reason is first column of the last row was null, so when check the first cell, if it is empty then the next entire row should be copied that area.
Is there anyway to check first 2 cells of the last row in a sheet in null or not?

If Right(Left(ActiveCell.Address, 2), 1) = "V" Then
myColumn = "V"
If Intersect(Target, Columns(myColumn)) Is Nothing Then Exit Sub
On Error GoTo last
If UCase(Target.Value) = "Y" Then
Target.EntireRow.Copy Sheets("Written-Off").Range("A" & Rows.Count).End(xlUp)(2)
Application.CutCopyMode = False
Sheets(Sh.Name).Select
Else
Exit Sub
End If

View 9 Replies View Related

Search Cells For Non Null Value

Nov 9, 2006

I'm having a problem with a seemingly simple formula I can't quite figure out. I need to search through four cells, M(n)-P(n), to find out if they have a value in each cell respectably. When the values are found I need them to form a make shift column in which the three cells underneath the cell with the formula are filled with any available values.

For example:
John Smith has the values: 1 in col M, 2 in col N, 3 in col O, and 4 in col P. That is of course ideal and I would be able to fill in the other cells very easy. But in my case John Smith has values: 1 in N, and 2 in P. Or whatever other order you can think of. I wrote a formula that looks like this:

=IF((M2="")*(N2="")*(O2=""),P2,(IF((M2="")*(N2=""),O2,(IF((M2=""),N2,M2)))))

This seems to work if they have a value in column M, but if for instance they dont but have a value in column N instead, it doesn't produce a result. Could someone give me some advice to what I am doing wrong? I am still new at writing formulas, so I'm sure there has to be some function I don't know about that would make this a lot easier.

View 9 Replies View Related

Range Object/property: Calculates 2nd Column Based On 3rd Column's Number

Jun 1, 2009

I'm trying to write a code that calculates 2nd column based on 3rd column's number or vice versa based on the condition set on the 1st column. Below, there are two procedures. "SimpleCalc" and "SimpleCalc2". I first wrote SimpleCalc2, but it isn't working, so I worked around the error by writing SimpleCalc, which selects a cell and moves around by offset. I personally find it hard to read and error prone as I develop more logic around it.

I'm trying to develop more function based on this code, so I need to make it neat and flexible. what I'm doing wrong in SimpleCalc2? Or do you have any suggestion to improve the code "SimpleCalc"? I'm using Excel 2003.

Sub SimpleCalc()

Dim SimpleMethodRng, SimpleMethod As String, i As Integer

ActiveWorkbook.Worksheets("Dashboard").Range("P5").Select

SimpleMethodRng = ActiveWorkbook.Worksheets("Dashboard").Range("N5:P12")

For i = 1 To 8

SimpleMethod = SimpleMethodRng(i, 1).........

View 3 Replies View Related

Change Cells With Text And/or Null To Zero

Feb 28, 2009

I have a large worksheet that has one column that contains cells with either numbers, text or in some cases Nulls. Can anyone help me with some code that would loop through all the cells in this column and when it encounters either text (any text) or a null change the cell value to 0 (Zero).

View 10 Replies View Related

Copy Non Null Cells In Column To Another

Sep 16, 2008

I want to search a range set in column a. from a1 to a200. When it finds a cell that has some sort of value in it (for example cell a29) i want it to take what is in cell a29 and set sell z1 = to whats in a29 and then continue searching for other cells that are not null in column A.

View 3 Replies View Related

Hiding Rows In VLOOKUP Sheet Based On Null Values

Dec 30, 2013

I have created a spreadsheet from a master using vlookup. I want to be able to hide rows which contain a null value (NA) in column B (sample attached). Is there a formula I can use which won't interfere with the vlookup or do I need to hide the rows individually? I tried filtering but that only filtered the cell and not the whole row.

test sheet.xlsx

View 3 Replies View Related

How To Delete Rows Based On Whether Or Not A Cell In Column B Is Empty Or Null

Jun 23, 2014

I am building a template ("Table") that will import data from 4 other spreadsheets and then format the data once its all in the template. I need to delete all rows where a name didn't import. The names are landing in column B (starting with B22), so I set up my code using an active cell loop macro to examine each cell to see if it was empty, and then to delete the row if it were. I've tried 4-5 iterations of code but nothing is working correctly.

Apparently when the fields are copied over from the other spreadsheets, some empty cells actually have something in them such that they are not completely blank. What syntax I can use so that I capture every instance of a blank/empty cell and delete that corresponding row? Some of the code I've tried is below.

[Code] .....

View 3 Replies View Related

Define Range() In Vba

Jan 23, 2007

I want to define a Range() in VBA. have cell1 and Cell2 in the format of rows and cols. ie. Cell1 = Row 1, Col 2. Cell2 is dynamic, can be sometimes row100, Col200, or Row23, Col 1000. May i know how to define it in VBA?

View 2 Replies View Related

Averaging Data Not To Include Null / Zero Cells

Mar 10, 2014

I am having difficulty trying to solution this:

Row 1 = Dates e.g. 1-Mar - 31-Mar
Row 2 = Day of Week e.g 1-Mar(B1) = Sat(B2) through 31-Mar ending at (AF)

Column A has hourly time intervals
A3 = 0:00
A4 = 1:00 etc to 23:00

Numbers fall into cells by date/day and interval up to today 10-Mar

What I am trying to do at is average the days separated by Weekdays and weekends..so the formula at AG for interval for weekday would be =AVERAGE(D3:H3,K3:O3,R3:V3,Y3:AC3,AF3) weekends (Column AH)would be =AVERAGE(B3:C3,I3:J3,P3:Q3,W3:X3,AD3:AE3)

I want to average the weekdays and weekend numbers without having to group the weekdays and weekends in a custom sort in the final column. That way when I add the data every day, it auto calculates in AG and AH. If I do it as it shows above, the AVG is skewed due to the blank cells.

Attached a sample worksheet.

View 4 Replies View Related

Formula For Annualized % Change With/without Null Cells

Oct 4, 2007

what formula to use when my formula does not determine any data (N/A) in a cell in order to count and use count number to determine annualized % change.

State 2002 2003 2004 2005 Annualized Change
GA 36.8% 37.1% 45.5% NA 4.4%

=SUM((C4-B4)+(D4-C4)+(E4-D4))/3 (here is my formula)

View 9 Replies View Related

Define A Time Range

Jan 21, 2010

I have two columns containg the arrival and departure hours of workers. From these columns I must define the workshift by specifiyng the time range for each shift. AZ contain the arrival hours while BA the departure.

The formula I use doesn't return the results correctly because some shifts are almost the same. i.e: if shift one starts (arrival hours) between 05:00 and ends at 12:59 and shift 1-2 starts at 08:00 and ends at 23:59 then it will go with the first shift even though the times in range belong second shift.

View 8 Replies View Related

Define Range As Variable?

Feb 23, 2013

why this won't work.

Code:

Dim DRange As String
Dim ERange As String
Dim SRange As String
EndRow = Range("A65536").End(xlUp).Row
DRange = Range("D1", "Z" & EndRow)
ERange = Range("E1", "Z" & EndRow)
SRange = DRange

View 6 Replies View Related

Using Variable To Define End Of Range

May 19, 2008

how to define the end of a range using a variable determined by a rng.Rows.Count command (or anything else)? Is this even possible? Here is what I currently have:

Set rng = Range("A1:A10000")
For i = rng.Rows.Count To 1 Step -1
If rng.Cells(i).Value = "0" Then rng.Cells(i).EntireRow.Delete
Next

I'd like to define the end of the range with more accuracy than I'm currently doing.

View 9 Replies View Related

Define Range During Macro

Apr 25, 2006

I'm trying to define a range to be copied during execution of a macro. The range to be copied must include all contiguous data from a defined starting range to the rightmost column and the bottommost row containing data (boht of which can change depending on input data). I use <End>+<RightArrow> and <End>+DownArrow> to define the range when working in Excel (not under macro control).

I used the macro recorder to define the code for the process described above, with results shown below:

Sub Macro2()
Sheets("Source_Info").Select
Range("A2:D6").Select
Range(Selection, Selection.End(xlToRight)).Select
Range(Selection, Selection.End(xlDown)).Select
Application.CutCopyMode = False
Selection.Copy
Sheets("Working_Data").Select
Range("A2").Select
ActiveSheet.Paste
End Sub

When I run the macro, however, the End(xlToRight) and End(xlDown) commands do not have any effect (i.e., the rang is not made any bigger when these statements are executed).

I've used the same code in previous macros (with previous versions of Excel and Windows), and it worked fine. I'm running Excel 2003 under Windows XP Professional now.

View 5 Replies View Related

Define An Unknown Range

Aug 13, 2006

is it possible to creaate a macro to highlight a range that starts at a1 to a? and there could be blanks amongst that range. the range will be unknown

View 9 Replies View Related

Define A Variable Range

Dec 22, 2006

I am searching for data, upwards from cell A1400. Once I find data (cell > 0), I need to count up 27 rows and then select these rows for columns A to E. Then I want to copy this block of data and paste it. I have been having difficulty with the selection of a block of data which will be in a different position depending upon the data used. The code I am using is below. The two lines that I need to replace with a Variables cell range reference are:

Range("A1268:E1242").Select
Range("A1268:E1242").Activate

Sub CalculateATR()
Sheets("Data").Range("a1400").Select
Do
If ActiveCell.Value > 0 Then
ActiveCell.Select
Exit Do
Else
ActiveCell.Offset(-1, 0).Select
End If
Loop Until ActiveCell.Value > 0

Range("A1268:E1242").Select
Range("A1268:E1242").Activate
Selection.Copy
Range("G5:K31").Select
ActiveSheet.Paste
Else
End If
End Sub