Delete All Rows Where Cell Value Is Number
Jul 6, 2014
I have the code below which is doing all I need it to do, except I would like to add a line that deletes all rows where the cell value in column "F" is a number:
The main thing is I can delete all rows if the value in column "F" is a number.
Idea Being, it:
-Deletes all rows where value in column F is blank.
-Then Deletes all rows where value in column "F" is numeric.
-Then deleted all rows where value in column "F" is any value specified in Column A is sheet 2.
[Code] .....
View 3 Replies
ADVERTISEMENT
Jul 19, 2013
Im trying to use VBA to copy old entries from a table on one sheet, to a history table on another sheet once they have been there for two weeks.
That much has been accomplished. However, I would also like the old entries to be removed from the original table.
Each entry is numbered using the following method:
If text is entered into the second column in a row, excel takes the number of the entry before that, adds 1 and places this number in a column outside of the table. The first column of each row then references this number. This way your entry is numbered as soon as you type it in. The reason I referenced outside the table and did not type the formula in the first column directly is because when I did and excel deleted a row through visual basic it messed up the rest of the table. Referencing outside fixes that problem, but there is another.
I have several columns for conditional formatting to the right of my table, full of 1s and 0s. When a row gets deleted in the table, all remaining rows shift up but continue to conditionally format based on the cells they were originally along side of. The problem is, those cells recalculate for the row in the table that is now along side of it.
Is there any way I could make the formulas in those columns evaluate only once and to not re-evaluate once something has moved?
View 2 Replies
View Related
Jun 5, 2014
I have a workbook, with a worksheet "Summary". In this worksheet "Summary" I would like to delete all columns that have less than 100 rows.
Please see the attached file : Summary.xlsx
View 3 Replies
View Related
Jul 1, 2014
I have a workbook has many worksheets, I would like to be able to delete worksheets if, for example, the number of rows in the worksheet is less than 100 rows.
View 3 Replies
View Related
May 18, 2009
The following macro deletes blank rows in my project (I have a source sheet that I "transfer" information to various "law practice worksheets", and it works fine. However, once I get past a certain number of rows (my project will include 65,000 rows), the macro does not delete the blank rows any more from the "law practice worksheets" (I previously sent this spreadsheet to the Forum with another question that was not answered yet). Here is the macro for deleting rows:
On Error Resume Next
Sheets("InternatlLaw").Select
Range("A2:D65000).Select
Application.DeleteBlankRows = True
Selection.EntireRow.SpecialCells(xlBlanks).EntireRow.Delete
ActiveSheet.Range("A2:D65000").Select
On Error GoTo 0.............
View 9 Replies
View Related
Jul 31, 2008
I am trying to write a macro to clean up a CSV file which automatically hard codes titles throughout the spread sheet. I am getting an error on the "FindNext" method below. I am getting "Unable to get FindNext propety of the Range Class" error. Also, the code for the For loop for multiple lines does not appear to be working.
Sub cleancsv()
lastRow = Range("A1").End(xlDown).Row
pmpt = InputBox(Prompt:="What text are you looking for?", _
Title:="Text", Default:="i.e.: Finished Goods Inventory")
numrows = InputBox(Prompt:="How many rows to delete (counting original):", _
Title:="Number of Rows", Default:="i.e.: 1")
Set cell = Range("A1:A" & lastRow). Find(pmpt)
If Not cell Is Nothing Then
For l = cell.Row To cell.Row + numrows
Range("A" & l).EntireRow.delete
Next l
End If
Do
View 8 Replies
View Related
Apr 27, 2014
I'm making a Excel 2013 spreadsheet that has formula in a column that auto enters a number 1-40 when something is entered to the left of that cell. There are 300 rows in the spreadsheet. I would like to make a drop down list in a column cell to the right that would delete that number in that cell from the drop down list. For example cell C1 has 39, that 39 then is deleted from the drop down list. C2 has 22 in it, click on the drop down list cell and it shows 1-40 less 39 and 22.
View 11 Replies
View Related
Oct 6, 2008
I search the board and found this VB. Is doing what I want, which is deleting any rows for which the cell in coulum E is not a number. But also is erasing the content of colum D.
________________
Sub DelTxtCell()
On Error Resume Next
With Range("e1", Range("e" & Rows.Count).End(xlUp)).Offset(, -1)
.Formula = "=if(isnumber(left(e1,1)+0),"""",false)"
.SpecialCells(-4123, 4).EntireRow.Delete
End With
End Sub
________________
I tried deleting the Offset and the SpecialCells; but as you can see by now, I do not know what I am doing.
View 9 Replies
View Related
May 26, 2009
This formula counts the number of spaces between words in a cell:
View 5 Replies
View Related
Feb 6, 2014
I am looking for a macro that will delete an entire row if the following condition is met:
If a cell in column B is red then delete that row.
View 14 Replies
View Related
Jun 9, 2014
I have very large spreadsheets and need to delete rows where a certain cell equals a specific value.
Here's the logic, delete all rows where column U = "1900"
View 1 Replies
View Related
Jun 5, 2009
I am reconciling a bank statement. My numbers in column "A" are positive, The bank numbers,also in column "A", are negative.
In Column "B" I put an if statement- , If(A1< 0,A1*-1,A1), to get all entries to positive numbers and copied down.
I sorted the numbers in column "B" and now need a macro to delete both rows if they have the same value.
The total of column "A" is say $500.00 with 50 entires. After the deletion column "A" is still $500.00 but with only 10 items because all duplications were deleted resulting in my bank reconciliation.
View 9 Replies
View Related
Jul 21, 2007
i m trying to make a macro I have do an additional step. I have a column (D) in a worksheet that is showing time values (2:30 PM, 3:15 PM, etc.). I need to code the macro so a user can enter a time value and the macro will then delete any rows in that worksheet in which the corresponding cell in column D shows a time value LESS THAN the value entered by the user. I've seen a couple of macros that delete rows matching a string in a cell but nothing that deletes based on the cell value being less than. Also - I need this to be done as a macro. I know how to filter the column manually to get what I want but I need this as a macro so people who are not familiar with Excel can simply open the workbook (I have the macro set to run automatically), enter the time value (ex. 2:30 pm) and they'll get all the rows in which the time is greater than or equal to 2:30 pm (the rows with an earlier time having been deleted by the macro).
View 2 Replies
View Related
Aug 16, 2007
I have a sheet in Excel 2004 for Mac that is a patient list with over 2000 patients. I need a rule that will compare values (patient IDs and responsible party ID) in two adjacent cells, if the values are different, to delete the entire row. The goal is to get rid of patients (rows) that are not the responsible party (responsible party ID).
View 3 Replies
View Related
Jun 14, 2013
Can you cut out part of a number and replace it in another cell. For example
A1 come in as ###+### and it will not always be a three digts all the time but I would like to keep the number in front of the "+" in A1 and the number behind the "+" into A2 cell.
Can you do this my a SEARCH("+",A1)LEFT("+)
View 3 Replies
View Related
Sep 11, 2013
I have working code that returns a row number within a for loop based on parameters I set.
Each time the for loop runs I would like to store this row number, then after the loop has finished, delete all stored rows.
Code:
for rowNum = 1 to x (some variable end row number which I already have worked out using End(xlUp).Row)
if x = y then
*storedRow = rowNum
end if
next rowNum
*
Lines with a * are the bits I can't work out. I've been trying to understand arrays by reading posts on what other people have done, but I can't fit (or fully understand) the reDims, or reDim preserves into my code. I've seen what appear to be quite complex ways involving uBounds and LBounds, but unfortunately I can't see how to use them.
All I want is to simply keep adding a row numbers to a variable, (i.e. row 2, 5, 20, 33, 120, etc) and then delete those specific rows.
View 4 Replies
View Related
Jun 2, 2008
I have 2 spreadsheets of delivery information. Sheet 1 contains data of all stores in the UK with addresses. Sheet 2 containts contacts of all stores that promotional matrial needs to be sent to.
The only common cell in a column of 4 digit store numbers.
I need to delete all rows from sheet 1 that do not contain a value in the store number column that is displayed on sheet 2.
View 11 Replies
View Related
Jun 12, 2009
Is there a quick way to delete "N" rows from the active cell regardless of the content of the cells in those rows? I import text files into excel then frequently have to go through them and delete rows of nonimportant data.
For example if cell A57 is currently selected can I run a macro that will delete the next 10 rows?
View 2 Replies
View Related
Oct 13, 2012
Within one column, there are cells with values A, B, and C for example. I want a loop that
- delete all rows from the first row to the row where A occurs,
- delete all rows BETWEEN where B and A occurs.
- and then finally, delete the single rows where C occurs.
This might seem I'm just deleting everything but obviously there are more "A" and "B"s in the column.
1
2
3 A
4
5 B
6
7 A
8 B
9 C
10
So in this example, rows 1 to 3 are deleted since I want to delete row 1 to the row where A is; rows 5 to 7 are gone (B to A); then finally row 8 is gone since C is there. Whether it's A/B inclusive doesn't matter..I just would like to see the (simple) logic.
View 9 Replies
View Related
Jul 6, 2014
I am looking to make a cell with the Value =Today()-1. I then want the code to pick up the cell value and then delete any row that does not have that value.
So for Example it would only keep =Today()-1 Dates in the sheet and delete the rest.
Code:
Dim LR As Long, i As LongWith Sheets("Sheet1")
LR = .Range("Q" & Rows.Count).End(xlUp).Row
For i = LR To 2 Step -1
If .Range("Q" & i).Value = "Y" Then .Rows(i).Delete
Next i
End With
View 9 Replies
View Related
Jan 28, 2010
I have rows between the Words "vendor" and "sales order" both words are in column A. The number of rows is never constant but needs to loop through the whole document. Is there a way to make a macro to do this?
View 9 Replies
View Related
Sep 25, 2008
I have an excel sheet where within my macro i want to delete some rows in the middle of my spreadheet. The number of rows to be deleted can vary so I want to know the code i can insert so it can find the number of rows with data and then delete them.
Currently, i have it working where i go to the top of the data and do End + Down and delete those entire rows. However, the problem is when i only have one row of data then the End + Down goes down to cells i do not want to delete. How can i overcome this?
This is my code to delete the rows:
Range("C40").Select
Range(Selection, Selection.End(xlDown)).Select
Selection.EntireRow.Delete
Range("A1").Select
As mentioned, this does't work if i just have one row of data. The data always starts at row 40 but can be only one row or more rows beneath this.
View 5 Replies
View Related
Feb 11, 2010
I'm trying to delete rows which has columns that appears to be blank. Below code worked fine but it took about 15 min for the macro to work through the spreadsheet.
View 2 Replies
View Related
Sep 24, 2011
I've got a sheet that I build from a weekly sheet. I can have 30 to 60 rows, but I always have 10 to 20 rows left over with data in column C, none in A, my last code is "Range("A1").End(xlDown).Offset(1, 0).Select" which takes me to the last cell in column A. Any code that I can then delete say 20 rows after that? I tried one code, but it wanted to delete everything below the cell selected which ran & ran.
"-" are blanks. Range moves the selected cell to A4. I want to delete row selected + 19 more.
-|A|B|C|D
1|Y|2|9|J|
2|R|1|8|N|
3|G|4|7|N|
4|-|-|L|-|
5|-|-|L|-|
View 9 Replies
View Related
May 23, 2006
I have a spreadsheet with a serial number is row 1 in column A with the rest of Row 1 empty. Column A is empty in Row 2, but has the data associated with the row above in columns B through L of Row 2. Then comes 2 blank rows and the pattern repeats with a new serial number in column A of row 5 and so on. I would like to move the serial number down one row, delete the now empty first row, delete the following 2 empty rows, and then loop to do the same thing again for all 9000 rows of the spreadsheet.
View 2 Replies
View Related
Aug 20, 2006
in VBA, I would like to do the following:
Delete the entire row where any cell in that row is equal to cell "b15" in worksheet "Metal Type".
I would like it to run across all the worksheets hidden or unhidden, in the workbook, (except for worksheet "Metal Type").
If possible I would also like it to prompt the user to accept the contents of cell "b15" in worksheet "Metal Type" or enter a new string.
Also can it alert the user when "no matches were found"
View 9 Replies
View Related
Feb 22, 2007
I am not sure of the VBA code to delete enitre row if a cell is empty only within a range, then Ascend according to that Row's Values and show the
Rank No's only on what Rows that remain.
The end result example is in Sheet2
View 9 Replies
View Related
Aug 29, 2007
I have merged two workbooks into one. What I need to do at this point is to delete all rows that have a duplicate entry, basically anytime the cell content in one cell matches the cell content in the cell right below or above it, BOTH rows should be deleted. At this point, this is above my VBA skills so I'm asking for help in how to do this. The stripped version of the workbook is attached (only 100 rows) but in reality this is a huge workbook with almost 22,000 rows.
You will notice in the attached workbook, that cell contents for A2 and A3 match. For what I need to do, I need both rows (2 and 3) to be deleted. If you go down a bit, starting in row 89 all the contents in column A are unique so those need to remain.
View 3 Replies
View Related
Apr 9, 2008
I am trying to delete a rows that contains a certain value. When I run the command from VB, it works. When I run the command from the tools menu in Excel, it works. When I run the command by clicking the command button located on the spreadsheet, it returns an error message "Delete method of range class failed" and highlights the line
Cells(x, 2).EntireRow.Delete
Private Sub CommandButton1_Click()
'Deletes expired coupons
x = 9
Do
If (Cells(x, 7).Value < Cells(2, 3).Value) Then
Cells(x, 2).EntireRow.Delete
Else
x = x + 1
End If
Loop Until Cells(x, 2).Value = ""
End Sub
View 5 Replies
View Related
Mar 25, 2013
If I have a list in sheet1, of say 300 names, I need some code, that for a table on sheet2, from A1 to F500 will delete the contents of cells in columns B C and D, IF the value for column A in that row is from the list in sheet1
List of names: sheet1, A1 to A300
Table that needs changing: sheet2, A1:F500
cells to be deleted in columns B C D IF value in A corresponds to the list in Sheet1
View 3 Replies
View Related
