I have a row range 5:20004. In that row range column R may have 'QLD' in the cell.
I am trying to delete all rows within that range that have QLD in column R or delete the row if R <> 'NSW' (would be a better way just in case there is something other than QLD)
to do this on opening the file automatically.
Basically, I have a table of data and I want to make a VBA coding so that Any row with "cell value = 0 in column C" will be deleted.
But I can't get my code working and i don't know why. There's no error pop up either.
I've seen a few examples of macros to delete the row if the first letter is something, but not if the first 2 is equal to something.
I'm looking to go thru every row that contains data and look in Column B to see if it starts with P4 or P5. If that's true, then delete the entire row.
Code that will turn the entire rows text bold and red if a cell in that row has the word.
New PO
I am familiar with the macro DeleteRowOnCell, but I want to delete rows when a cell in a selected column has a formulae which is returning empty text. I tried the macro DeleteRowsFastest without success.
View 2 Replies View RelatedHTML Code:
Sub DeleteEmptyColumns2()
Dim Cell As Range
For Each Cell In Range("4:4")
If Cell = "0" Then
Cell.EntireColumn.Delete
End If
Next Cell
End Sub
I am attempting to remove columns in my table of data, using the above code seems to remove some them but not all, is this the best way to loop through a range?
I have some data in sheet 1 column A. However, the amount of data varies everytime. In addition, blanks cells may be present in column A as well.
I have some data in sheet 2 column A. The amount of data also varies everytime. In addition, blank cells maybe present as well.
what I need here is to match the values in column A sheet 1 to column A sheet 2, and if it matches to delete the entire row in sheet 1.
However, i want to keep all blank cells in column A sheet 1.
Sheet 2 blank cells to be removed if any.
how do I do that in VBA? A lot of forums talk about a specific value but none on non specific values.
I have a file with 238 rows and 10 columns (see file attached) Column G include phone numbers, some phone numbers are duplicated.
How can I use a macro (I must do it with a macro) to delete the ENTIRE row if the value in column G is the same in other row?
For example: look at rows 2 and 3 : the value in column G2 and G3 is the same, therefor delete row 3
(and if the value in G4 was also the same, then delete also row 4, and so on..)
I can't get this code to work which I want to delete the entire row if the cell in the specified range contains only 3 characters;
Code:
Sub CharCount()
Dim cell As Range
Dim bottomK As Integer
bottomK = Range("D" & Rows.Count).End(xlUp).Row
Dim rng As Range
Set rng = Range("D2:D" & bottomK)
For Each cell In rng
If Len(cell) = 3 Then
EntireRow(bottomK).Delete
End If
Next cell
End Sub
VBA codes in filtering blanks.
Here is a screenshot, and what i want to do is to delete the entire row that has a blank cell. In which here, the 5th row, 7th row and 9th row.
Looking to write a macro to delete an entire row if the word GROWTH is found in any cell under Column C.
View 9 Replies View RelatedI need to write a macro that will search column A and find the word hospital or HOSPITAL and if found delete the entire row. The code I have below will do this ONLY if hospital or HOSPITAL is the only word in the cell. However in my column A there are numerous words in each cell i.e Saint Mary's Hospital.
Sub KillRows()
Dim rngNew As Range
Dim rngDelete As Range
Dim aCell As Range
Dim lastrow As Long
Set rngDelete = Nothing
Set rngNew = Worksheets("Sheet1").Range("A1", Range("A65536").End(xlUp))
rngNew.Select
For Each aCell In Selection
Select Case aCell.Value...........
I have tried a range of "sumproduct" and "count if" and I am still not having any luck.
What I would like excel to do is to count what surgery/hospital (B)is referring for what product (F)
help.xlsx
i have table of values if any value in the coulomb G and I greater than or equal to 1 the entire row must be deleted how can i do this ?
View 4 Replies View RelatedHow to delete the entire row if the cell value of the "D" column is greater then zero (not containing "0").
View 8 Replies View RelatedI'm trying to write a procedure which will search the contents of Column B of my worksheet for the word "Total". Whenever the word "Total" is found in a cell within Column B, the entire row should be deleted.
View 5 Replies View RelatedI have got a vacancy tracker spreadsheet and I need it to move an entire row from the 'Open' to the 'Closed' sheet based on the status in column K, i.e. 'Closed +', 'Closed -', and 'Closed + Achieve'. Once this has been done I want it to delete the entire row in the 'Open' sheet. At the moment it just cuts the entire row and then it is left blank and when I delete it manually the macro stops working completely.
Also I can only get it to move 'Closed +' and 'Closed -' and seem not to be able to add a command to move 'Closed + Achieve' rows.
This is what I have got so far:
Private Sub Worksheet_Change(ByVal Target As Range)
If Intersect(Target, Columns("K")) Is Nothing Then Exit Sub
Application.EnableEvents = False
If Target.Value = "Closed +" Then
[Code] .......
I used this macro to find the duplicates in column B:
Sub KryDups()
ScreenUpdating = False
FirstItem = ActiveCell.Value
SecondItem = ActiveCell. Offset(1, 0).Value
Offsetcount = 1
Do While ActiveCell <> ""
If FirstItem = SecondItem Then
ActiveCell.Offset(Offsetcount, 0).Interior.Color = RGB(255, 0, 0)
Offsetcount = Offsetcount + 1
SecondItem = ActiveCell.Offset(Offsetcount, 0).Value
Else
ActiveCell.Offset(Offsetcount, 0).Select
FirstItem = ActiveCell.Value
SecondItem = ActiveCell.Offset(1, 0).Value
Offsetcount = 1
End If
Loop
ScreenUpdating = True
End Sub
The duplucate cells are now red in color. (RGB(255, 0, 0)). How do I now code VB to delete the rows in column B where the cell color is red? Here is some of the code that I tried:................
Delete entire Row if cell in column contains "Dog" in it.?
Example,
duck321
dog123
cat123
dog123
duck321
cat123
so after it would look like this
duck321
cat123
duck321
cat123
If cells in column A3:A10000 are blank / unpopulated I would like to delete the blank rows.
View 6 Replies View RelatedI know it can delete entire rows based on the value of single cell, I just don't know how to do it. So what I need is a macro that will delete an entire row if the value in a particular column = 0.
More details: ....
I'm using the following code to delete rows that I don't want to include and I've ran into some more things that need to be deleted...
For lLoop = RngCol.Rows.Count To 2 Step -1
Select Case RngCol(lLoop, 1)
Case " Date:", "Skill:", "Agent Name", "~*", "*Train*"
RngCol(lLoop, 1).EntireRow.Delete
End Select
Next lLoop
An example of "~*" would be: ***SICARII***
An example of "*Train*" would be: Ozgrid Train1
It's not recognizing these new cases. Do I have to utilize FIND? (since CTRL+F does work with the given cases)
I'm trying to input a check into my macro. Basically the logic I'm trying to follow is:
If Row 1 = Row 2 then delete row 2,
ElseIf Row 1 Row 2 then Display MsgBox "Row 1 and Row 2 are different. Do you wish to continue?"
If user selects yes, resume
If user selects no, end sub and display MsgBox "Macro ended. Please correct changes manually"
with performing the following tasks with VBA:
1). For each cell that in the range that has a Red background delete the entire column
I have attached a sample spreadsheet where I have tried to do this. It's not quite working. It does not seem to work when there are RED cells next to each other.
I know that I can do a simple thing like column("A:A"), but I'd rather have it in a loop as in the sample code, in case the columns change in the future.
2). The second task is to delete the rows in the spreadsheet where the first cell in the row is a blank.
I need an easy code that searches all of column A and deletes the entire row if the cell has the value "-". It needs to find the last row of data using something like LastRow = Range("A" & Rows.Count).End(xlUp).Row
View 4 Replies View RelatedI'm Trying to write a code to delete Value in Column E & F If value in Column A = 0. (same row)
I've tried a few methods but none of them work.
Any VBA code to delete rows in a subtotalled list?
The subtotal line and the associated rows should be deleted when subtotal equals zero.
How would i search the entier worksheet im in, looking at column b only, and delete the entire row if i find the word Date in it.
View 9 Replies View Relatedwhen i delete the entirerow, it shifts the rows up (which is what I want) but it skips that row when it does.
so if I have 2 blank cells together it will delete the 1st and leave the 2nd blank.
Sub ()
Dim myrange As Range
Set myrange = ("a:a")
For Each c In myrange
If c.Value = "" Or c.Value <= 5 Then
c.EntireRow.Delete
End If
Next
End Sub
I need a macro that can look at multiple (say three) rows and delete those rows if they match another three rows in the worksheet.
For example:
1 0
3 1
5 7
4 4
6 5
8 3
1 8
5 2
3 9
6 5
8 3
1 8
7 5
If three rows are the same, then one set is deleted (it can be either bottom or top set). I would like to do this for rows 1-500 in the worksheet.