HTML Code:
Sub DeleteEmptyColumns2()
Dim Cell As Range
For Each Cell In Range("4:4")
If Cell = "0" Then
Cell.EntireColumn.Delete
End If
Next Cell
End Sub
I am attempting to remove columns in my table of data, using the above code seems to remove some them but not all, is this the best way to loop through a range?
In any open (new or existing) workbook (Excel 2007), I cannot delete a column by right clicking the column header and highlighting the entire column. The "delete" word is greyed out and not selectable. I CAN however still delete a column by going to the "Cells" toolbar, then "Delete" pulldown menu, then "Delete Sheet Columns". Right clicking the column header is much simpler and easier.
BTW, I can still delete rows by both methods of right clicking on the row header and by going to the Cells toolbar.
I'm using this code to find values of "FEP MHS" or "LSD MHS" in column S and if column S containes either of these values it deletes the entire row from the spreadsheet. I need this to work on a spreadsheet that runs on a daily basis and each day it contains a different number of rows. I have used this code to successfully delete most rows that contain these values in Column S but for some reason it does not delete all the rows, typically leaving 6 - 7 rows that contain these values. I'm using Excel 2007 I need code that finds the last row used and deletes the entire row if these values are present.
Dim CelRSLHMHSD As Range, RngRSLHMHSD As Range, iRSLHMHSD As Long
Set RngRSLHMHSD = Columns("S").SpecialCells(xlConstants, xlTextValues)
For iRSLHMHSD = RngRSLHMHSD.Count To 1 Step -1
If RngRSLHMHSD(iRSLHMHSD).Value = "FEP MHS" _
Or RngRSLHMHSD(iRSLHMHSD).Value = "LSD MHS" _
Then RngRSLHMHSD(iRSLHMHSD).EntireRow.Delete
Next iRSLHMHSD
I've seen a few examples of macros to delete the row if the first letter is something, but not if the first 2 is equal to something.
I'm looking to go thru every row that contains data and look in Column B to see if it starts with P4 or P5. If that's true, then delete the entire row.
I am familiar with the macro DeleteRowOnCell, but I want to delete rows when a cell in a selected column has a formulae which is returning empty text. I tried the macro DeleteRowsFastest without success.
View 2 Replies View RelatedI have a row range 5:20004. In that row range column R may have 'QLD' in the cell.
I am trying to delete all rows within that range that have QLD in column R or delete the row if R <> 'NSW' (would be a better way just in case there is something other than QLD)
to do this on opening the file automatically.
I am trying to count the distinct times a value shows up in a column, if another column has a 2 in it.
For example:
Columns
A, B
2,P25
2,P25
3,P5
3,P6
2,P5
The results shoud be: (2) Because I only want to count the P25 one time.
I'm using Excel 2010
Basically, I have a table of data and I want to make a VBA coding so that Any row with "cell value = 0 in column C" will be deleted.
But I can't get my code working and i don't know why. There's no error pop up either.
I have some data in sheet 1 column A. However, the amount of data varies everytime. In addition, blanks cells may be present in column A as well.
I have some data in sheet 2 column A. The amount of data also varies everytime. In addition, blank cells maybe present as well.
what I need here is to match the values in column A sheet 1 to column A sheet 2, and if it matches to delete the entire row in sheet 1.
However, i want to keep all blank cells in column A sheet 1.
Sheet 2 blank cells to be removed if any.
how do I do that in VBA? A lot of forums talk about a specific value but none on non specific values.
I have Microsoft Office Excel 2007 Power programming with VBA in which this website was listed as a good reference site. I am working on a spreadsheet where I want to select the last non-empty cell in a column and the column always has some cells that are empty, though it is NOT the last non-empty cell in the column. This spreadsheet is automatically generated and I want to change this particular column to all one format and all one number, 0042. This spreadsheet is then loaded into another system via tab-delimited txt file, so this number is meant to serve as an indicator. Sounds like I gave too much information, just wanted to be clear.
View 9 Replies View RelatedCode:
A
B
C
D
2
34
If I had columns as above with values in B1 and C1 but none in A1 and D1
How do I loop through so that columns A and D are hidden?
My spreadsheet has columns A to DI and different columns have values each day so I want to write code to hide just the columns with no values.
I am looking to insert a row every time any cell in column A = R
This will happen around 50 times.
The inserted row will need to have an R in column A and the number 349273 in column B.
I need to match data in cell A to cell B and then if they equal I need to copy the adjacent cell C to cell X . How do I set up a macro to do this automatically? I have over 5000 cells to compare and match up.. I have Office 2003.
View 7 Replies View RelatedI have tried a range of "sumproduct" and "count if" and I am still not having any luck.
What I would like excel to do is to count what surgery/hospital (B)is referring for what product (F)
help.xlsx
I'm using Excel 2010). I have column I, which is the sum of columns A and B (first and last names of patrons), and I have used conditional formatting to identify all duplicates in column I with red text. I would now like a macro to find red text in column I and then delete the corresponding rows.
I've been looking around on the web for a while and have cobbled together this code stolen from other people's macros:
[Code] ....
When I run it, I get the following error:
Run-time error '1004':Application-defined or object-defined error
Excel doc is called "stupid mailing list.xlsm", sheet I want to run the macro on is called "voters".
I have a large file with a bunch of color coding and need to delete my red rows only.
View 3 Replies View RelatedI'm trying to input a check into my macro. Basically the logic I'm trying to follow is:
If Row 1 = Row 2 then delete row 2,
ElseIf Row 1 Row 2 then Display MsgBox "Row 1 and Row 2 are different. Do you wish to continue?"
If user selects yes, resume
If user selects no, end sub and display MsgBox "Macro ended. Please correct changes manually"
I am using excel 2007 and when I right click on the worksheet tab, delete is greyed out. My workbook/sheet is not shared. I also had the problem owith row and columns. CommandBars("row").Reset sorted that out but I can't seem to sot out the tab issue.
View 6 Replies View RelatedI am using Excel 2007 and I created a table (i.e., listobject) using the macro recorder as follows:
Code:
ActiveSheet.ListObjects.Add(xlSrcRange, Range("$A$3:$J$50"), , xlYes).Name = "MyData"
Questions:
1. How do I delete this table via VBA?
2. How would I check to see if this table already exists so it follows this logic:
If "table does not exists" then
'create it (using the line of code above)
End If
I have a file that has an original file format .xls
I saved as .xlsx (I am using Excel 2007) with a different name so I could make changes to the new file without changing the original.
That turn off compatibility mode.... but it is still "shared". While it is shared I cannot delete a sheet. In fact, I really don't even want it to be shared. If the file is open, and someone else opens it, I want it to open as "read only". I cannot uncheck the "Allow changes by more than one user at the same time. This also allows workbook merging." checkbox because it is greyed out.
I have two spreadsheets. one contains a master list of computer names. the other contains a list of computer names to be removed from the master list (exception list).
I need to go through the master list and remove any computer names that are on the exception list- for example, if 'computer1' is in the exception list, i have to find and remove 'computer1' from the master list.
The exception list is quite long, and I want to automate this process if possible. not sure how to achieve this.
I'm using Excel 2007 Standard.
Following the tips doesn't allow to remove a character.
I exported email addresses from Outlook and they have the following character ' in front of the email address.
Using Excel 2007.. it says :"check if your search formatting and criteria are defined correctly. If you are sure that matching data exists in this workbook, it may be on a protected worksheet. Excel cannot replace data on a protected worksheet"
So I made a new file, and copied and pasted the cells into the new spreadsheet.. same message.
The following code deletes a specific connection in a workbook:-
ActiveWorkbook.Connections("text123").Delete
How can I code this so that I can delete ALL connections in a workbook without having to specify the names (as these will always be different).
What i have is a workbook that can have multiple sheets. Sheet 2,3,4 (if there are) are a continuation of sheet 1. First 2 rows of sheet 1 are headers and the last row of the last sheet (can be 2,3, 4....) is a footer. There are 14 columns (A-N) in each sheet. Col "N" has set status and col I has set names.
What i am looking for is a macro that can perform the following actions in the the set order:
1) deletes all rows where status in col N is "closed"
2) delete all rows where name in Col I is "Many"
3) if there are multiple sheets copy all data in 1 sheet once above 2 are deleted
4) I want to update cell A2, C2, I2, M2 & N2 with Hostel, Direction,Name,Flight & Status respectively
5) Create a pivot table with all data (Col A-N & Row 2 to last) in a new sheet and call it Summary - Pivot
I can then manually select how the pivot will look
Currently i am going through all sheets manually and filtering data. Using excel 2007
I have a public/shared Excel 2007 workbook on our network and someone colored an entire column yellow. When that happened, it increased the number of rows to over 655,000. I didn't know that was posible but they are there... The thing moves very slowly now and when I try to delete (45,000 lines at a time), I either get a error window telling me I don't have resources to perform the operation, or I do smaller chucks and after 30 minutes deleting lines, it will not save.
I would rather not have to recreate the whole workbook if I can delete the lines on this one page.
Macro code to find several column names in row 1 (which can be anywhere in the work sheet) and delete them e.g. date, month, code, amount etc.......
Excel version 2007
I'm Trying to write a code to delete Value in Column E & F If value in Column A = 0. (same row)
I've tried a few methods but none of them work.
Any VBA code to delete rows in a subtotalled list?
The subtotal line and the associated rows should be deleted when subtotal equals zero.
I have written a sub with the purpose of finding rows based on a critieria, copying the rows to another worksheet and deleting the original row.
The code:
Code:
Sub MoveToIgangvaerende()
'
' Flytter opgaven til sheetet Igangværende projekter
'
Dim i, j, Index As Integer
Forfra:
For i = -1 To 1000
If Sheets("Pipeline").Cells(3 + i, 20) = "Ja" Or Sheets("Pipeline").Cells(3 + i, 20) = "ja" Then
[Code] ......
I get the error message "Method 'Delete' of object 'Range' failed" at the line "Sheets("Pipeline").Cells(3 + i, 18).EntireRow.Delete".
The sub has previously worked perfectly fine.
I'm working in Excel 2007 and need to move data from multiple rows to a single row if the ID matches.Below is sample data I would be working with. I want to move data from columns F-U to the right of the original data in the row above it. I would also like to delete the rows that had data moved.
GIDSurnameNameEmployee Number OriginalDate of birthGranting ARE
Employing ARECountry Employing ARECHCM Supplier IDVehicle
Investmt. shares / Awards at termination dateMatching Shares
at termination dateTermination
[Code]....