Cut / Paste And Delete Entire Row Based On Cell Value
Dec 13, 2013
I have got a vacancy tracker spreadsheet and I need it to move an entire row from the 'Open' to the 'Closed' sheet based on the status in column K, i.e. 'Closed +', 'Closed -', and 'Closed + Achieve'. Once this has been done I want it to delete the entire row in the 'Open' sheet. At the moment it just cuts the entire row and then it is left blank and when I delete it manually the macro stops working completely.
Also I can only get it to move 'Closed +' and 'Closed -' and seem not to be able to add a command to move 'Closed + Achieve' rows.
This is what I have got so far:
Private Sub Worksheet_Change(ByVal Target As Range)
If Intersect(Target, Columns("K")) Is Nothing Then Exit Sub
Application.EnableEvents = False
If Target.Value = "Closed +" Then
[Code] .......
View 2 Replies
ADVERTISEMENT
Mar 9, 2007
I used this macro to find the duplicates in column B:
Sub KryDups()
ScreenUpdating = False
FirstItem = ActiveCell.Value
SecondItem = ActiveCell. Offset(1, 0).Value
Offsetcount = 1
Do While ActiveCell <> ""
If FirstItem = SecondItem Then
ActiveCell.Offset(Offsetcount, 0).Interior.Color = RGB(255, 0, 0)
Offsetcount = Offsetcount + 1
SecondItem = ActiveCell.Offset(Offsetcount, 0).Value
Else
ActiveCell.Offset(Offsetcount, 0).Select
FirstItem = ActiveCell.Value
SecondItem = ActiveCell.Offset(1, 0).Value
Offsetcount = 1
End If
Loop
ScreenUpdating = True
End Sub
The duplucate cells are now red in color. (RGB(255, 0, 0)). How do I now code VB to delete the rows in column B where the cell color is red? Here is some of the code that I tried:................
View 5 Replies
View Related
Jun 10, 2009
I know it can delete entire rows based on the value of single cell, I just don't know how to do it. So what I need is a macro that will delete an entire row if the value in a particular column = 0.
More details: ....
View 9 Replies
View Related
Jun 16, 2014
I have table in which against the Column A data values are added in Column B, C and D.
If Column B,C and D cell values is 0, then I want entire row including A to be deleted. How can I do this in VBA?
Note: Column A data begins from Row 15 and below.
Just to avoid confusion. I want row deletion, only when all the three cell on B,C and D is = 0
View 7 Replies
View Related
May 13, 2009
I have a problem deleting rows based on a condition, i didn't know how to use offset method.
i'm using a table like this one :
A B C
1 Main design1 FFR0
2 Extra design2 FFR0
3 Main design3 FFR0
4 Extra design4 FFR0
.
.
n Main designn FFR0
I want to delete entire row if "FFR0" in column C exists in a row beginning by "EXTRA" (column A)
View 6 Replies
View Related
May 27, 2009
I have a worksheet where I have restricted the users from scrolling around beyond a certain range.
Because of that the user is prevented from selecting an entire row.
There are some cases where the user should be able to delete entire row or range of rows.
How can I allow them to select say cells "C17:C35" [they would just hoghlight the range] and hit ctrl+d; which would trigger a macro and the macro in turn would delete all the rows in that selection [rows 17 through 35]?
I know some basic codes for deleting entire rows, but I don't know how to read first and last row of the selection under Target property.
View 3 Replies
View Related
Jul 18, 2012
Ihave a list of names in column A in certain rows instead of name there is an email address in this case I want to delete the entire row
View 4 Replies
View Related
Oct 19, 2011
Simple code that can delete entire row if certain criteria is met in a single cell
Example
I have a bank statement where under a first column (DATA TYPE), the cell could contain either "DATA" or "TOTAL"
How can I delete the rows contain the word "TOTAL" assuming the column is already sorted.
View 3 Replies
View Related
Jun 15, 2011
I have a file with 238 rows and 10 columns (see file attached) Column G include phone numbers, some phone numbers are duplicated.
How can I use a macro (I must do it with a macro) to delete the ENTIRE row if the value in column G is the same in other row?
For example: look at rows 2 and 3 : the value in column G2 and G3 is the same, therefor delete row 3
(and if the value in G4 was also the same, then delete also row 4, and so on..)
View 10 Replies
View Related
Sep 5, 2013
I can't get this code to work which I want to delete the entire row if the cell in the specified range contains only 3 characters;
Code:
Sub CharCount()
Dim cell As Range
Dim bottomK As Integer
bottomK = Range("D" & Rows.Count).End(xlUp).Row
Dim rng As Range
Set rng = Range("D2:D" & bottomK)
For Each cell In rng
If Len(cell) = 3 Then
EntireRow(bottomK).Delete
End If
Next cell
End Sub
View 6 Replies
View Related
May 14, 2014
VBA codes in filtering blanks.
Here is a screenshot, and what i want to do is to delete the entire row that has a blank cell. In which here, the 5th row, 7th row and 9th row.
View 5 Replies
View Related
Dec 10, 2008
Looking to write a macro to delete an entire row if the word GROWTH is found in any cell under Column C.
View 9 Replies
View Related
Oct 1, 2007
I have a row range 5:20004. In that row range column R may have 'QLD' in the cell.
I am trying to delete all rows within that range that have QLD in column R or delete the row if R <> 'NSW' (would be a better way just in case there is something other than QLD)
to do this on opening the file automatically.
View 9 Replies
View Related
Jan 30, 2008
I need to write a macro that will search column A and find the word hospital or HOSPITAL and if found delete the entire row. The code I have below will do this ONLY if hospital or HOSPITAL is the only word in the cell. However in my column A there are numerous words in each cell i.e Saint Mary's Hospital.
Sub KillRows()
Dim rngNew As Range
Dim rngDelete As Range
Dim aCell As Range
Dim lastrow As Long
Set rngDelete = Nothing
Set rngNew = Worksheets("Sheet1").Range("A1", Range("A65536").End(xlUp))
rngNew.Select
For Each aCell In Selection
Select Case aCell.Value...........
View 5 Replies
View Related
Jul 12, 2012
i have table of values if any value in the coulomb G and I greater than or equal to 1 the entire row must be deleted how can i do this ?
View 4 Replies
View Related
Dec 27, 2012
How to delete the entire row if the cell value of the "D" column is greater then zero (not containing "0").
View 8 Replies
View Related
Mar 19, 2014
Basically, I have a table of data and I want to make a VBA coding so that Any row with "cell value = 0 in column C" will be deleted.
But I can't get my code working and i don't know why. There's no error pop up either.
View 2 Replies
View Related
Jan 20, 2009
I'm trying to write a procedure which will search the contents of Column B of my worksheet for the word "Total". Whenever the word "Total" is found in a cell within Column B, the entire row should be deleted.
View 5 Replies
View Related
Mar 26, 2007
Delete entire Row if cell in column contains "Dog" in it.?
Example,
duck321
dog123
cat123
dog123
duck321
cat123
so after it would look like this
duck321
cat123
duck321
cat123
View 9 Replies
View Related
Jan 8, 2014
first need to look for "PR" in column G, if found need to cut the entire row and insert at the top of the same worksheet.
View 1 Replies
View Related
Oct 16, 2013
If cells in column A3:A10000 are blank / unpopulated I would like to delete the blank rows.
View 6 Replies
View Related
May 9, 2008
I'm using the following code to delete rows that I don't want to include and I've ran into some more things that need to be deleted...
For lLoop = RngCol.Rows.Count To 2 Step -1
Select Case RngCol(lLoop, 1)
Case " Date:", "Skill:", "Agent Name", "~*", "*Train*"
RngCol(lLoop, 1).EntireRow.Delete
End Select
Next lLoop
An example of "~*" would be: ***SICARII***
An example of "*Train*" would be: Ozgrid Train1
It's not recognizing these new cases. Do I have to utilize FIND? (since CTRL+F does work with the given cases)
View 4 Replies
View Related
May 17, 2013
with performing the following tasks with VBA:
1). For each cell that in the range that has a Red background delete the entire column
I have attached a sample spreadsheet where I have tried to do this. It's not quite working. It does not seem to work when there are RED cells next to each other.
I know that I can do a simple thing like column("A:A"), but I'd rather have it in a loop as in the sample code, in case the columns change in the future.
2). The second task is to delete the rows in the spreadsheet where the first cell in the row is a blank.
View 4 Replies
View Related
May 7, 2014
I need an easy code that searches all of column A and deletes the entire row if the cell has the value "-". It needs to find the last row of data using something like LastRow = Range("A" & Rows.Count).End(xlUp).Row
View 4 Replies
View Related
May 24, 2007
I am trying to do, is paste a word in front of text that is already residing in cell throughout an entire column, and then automate this process by creating a macro that will do the same thing for me throughout an entire column. To best explain this, it woudl be like if you have a column 100 rows/cells long, and every cell already contains data. I need to insert something in front of what lies within each cell.
View 9 Replies
View Related
Jun 23, 2014
I am using the code below in Excel 2013.
Sub Test()
For Each Cell In Sheets(1).Range("J:J")
If Cell.Value = "131125" Then
[Code]....
This works great except that it pastes formulas. I would like to paste values only. I've tried
" PasteSpecial Paste:=xlPasteValues, Operation:=xlNone, SkipBlanks _ :=False, Transpose:=False" and it gives me an error.
View 3 Replies
View Related
Aug 13, 2009
From what I understand this is a simple process but since I am new to programming and I am in need of help. I am trying to write into one of my macros that as it is searching in the sheet if it finds CRL in column C and if it finds a value between -1 and 100,000 in column K, then it will highlight the entire row green.What can I do to add this into my macro?
View 14 Replies
View Related
Jan 29, 2010
I have a range of data in Sheet1- if in column D the cell contains the word "Everyday" I need the entire row to be cut and pasted to Sheet2. Does anyone know of a way in which a macro could do this? I would need the entire row to be cut from Sheet1 and pasted into Sheet2.
View 3 Replies
View Related
Jun 4, 2014
I would like to sort rows from Sheets 2-6 based on the value in Column G into Sheets with the same name. For example, if a cell in column G states "BluePrint", I would like the entire row to be copied into the tab labeled "BluePrint".
however I have been unsuccessful in adapting the coding to my specific wording.
View 1 Replies
View Related
Jan 31, 2010
Based on the example and solutions from one of our friends post
http://www.excelforum.com/excel-prog...ell-value.html.
i want to know the code with the same data as posted in THAT example,changing the data slightly like adding "TODAY" & "TOMMORROW" as other key words which will be Cut/Copied as seperate groups one beneath the other.
I had attached the worksheet with the actual data & the final Required format.
View 9 Replies
View Related
